Embed Size (px)
Citation preview
Bestellinformationen
TBi beCool 2.2 230 V / 50 Hz 550P348024
TBi beCool 2.2 Sensor 230 V / 50 Hz 550P358024
TBi beCool 2.2 Sensor Plus 230 V / 50 / 60 Hz 550P358025
TBi beCool 2.2 Sensor 115 V / 50 / 60 Hz 550P358011
TBi beCool 2.2 Sensor Plus 115 V / 50 / 60 Hz 550P358012
Technical data
TBi beCool 2.2 (Sensor) - Cooling unit
Cooling capacity 2200 W
Cooling fluid temp max. 60º C
Flow rate min. 0,25 l / min ( 4 bar) max. 8 l / min (0 bar)
max. pressure 4 bar
Electrical power 300 W
Tank capacity 5 l
Heat exchanger 1.9 m2 (tested at: 35 bar)
Pump Centrifugal pump with stainless steel shaft, integrated overload protection
Dimensions 230 x 270 x 530 mm ( L x W x H)
Weight approx. 13 kg ( empty )
TBi beCool 2.2 Sensor - with additional flow switch
Shut-off limit adjustable, 0.5 - 3.3 l / min
Connection via separate control cable
TBi beCool 2.2 Sensor Plus - with additional temperature switch
Shut-off temperature 60 °C, measured at the return line
►8 5.1
TBi Industries
beCool 2.2 (Sensor)
OUT
IN
270 mm
520
mm
Max 5.0 l
Min 2.5 l
Instructions
OUT
IN
230 mm
Spare parts
1 Rocker switch 230V 550P002060
2 Flow switch 550P001020
3 Pump unit complete 550P001021
- Capacitor for pump motor 550P002061
4 Vent 550P002062
5 Heat exchanger cpl. 550P001022
6 Screw-on cap for tank 550P002063
- Tank 5 liter beCool 2.2 550P002064
7 Quick connector for installation on the unit 377P013114
Recommended accessories
- Waterhose PVC 5 x 1.5 mm, red, in coil of 100 m 303P060000
- Waterhose PVC 5x1.5 mm, blue, in coil of 100 m 303P050000
- Hose clamp 9.5 mm with ring 373P100095
- TBi CoolingFluid Pro (10 l), cooling fluid with corrosion inhibitor, antifreeze up to - 15 °C 392P000095
Pos. Description Part. no.
TBi Industries GmbHRuhberg 14D - 35463 Fernwald-SteinbachP.O. Box 67D - 35461 Fernwald-Steinbach
Tel. + 49 6404 9171- 0Fax. + 49 6404 9171- 40Internet: www.tbi-industries.comE-mail: [email protected]
© 2017 TBi Industries GmbH. All rights reserved. Subject to change without notice. Warranty only when using original TBi consumables and spare parts. Excerpts and reprints not permitted. Nr. DOKP185012, 01 / 2017.
3
4
5
6
1
M
Connection diagramm
max. 50 V, 0.3 A
contact is opened when flow is too low
Control cable (only for versions Sensor / Sensor Plus)
Power
2
7
TBi beCool 2.2 Sensor
max. 50 V, 0.3 A
contact is opened when flow is too low or return temperature is too high
TBi beCool 2.2 Sensor Plus
Ts = 60 °C
M
