TB 43-0002-36

T B 4 3 - 0 0 0 2 - 3 6

TECHNICAL BULLETIN HEADQUARTERS

N o 4 3 0 0 0 2 - 3 6DEPARTMENT OF THE ARMY

WASHINGTON, DC, 31 JULY 1995

P a r a P a g e F i c h e F r a m e

SECTION I. INTRODUCTIONG e n e r a l 1 3 1 A 0 4Format of Technical Bulletin 2 3 1 A 0 4

SECTION II. ONE-TIME REPAIR EXPENDITURE LIMITSProcedu re 3 3 1 A 0 4Expenditure Limits 4 3 1 A 0 4

SECTION III. TECHNICAL INSPECTIONSProcedure 5 4 1 A 0 5F o r m s 6 4 1 A 0 5

SECTION IV. COMPUTATION OF REPAIR COST ESTIMATEScost Factors 7 4 1 A 0 5Procedu re s 8 4 1 A 0 5

SECTION V. DISPOSITION INSTRUCTIONSEligibility of materiel for evacuation to depot maintenance 9 4 1 A 0 5Disposition instructions 1 0 4 1 A 0 5

SECTION VI. APPENDICESGeneral 1 1 4 1 A 0 5

Explanation of columns 1 2 5 1 A06

1

A 2

TB 43-0002-36

P a r a P a g e Fiche F r a m e

APPENDIX A. REFERENCES 6 1 A07APPENDIX B. EXPENDITURE LIMITS FOR FSC CLASS 6605 7 1 A08APPENDIX C. EXPENDITURE LIMITS FOR FSC CLASS 6625 8 1 A 0 9APPENDIX D. EXPENDITURE LIMITS FOR FSC CLASS 6635 9 1 A10APPENDIX E. EXPENDITURE LIMITS FOR FSC CLASS 6640 1 0 1 A11APPENDIX F. EXPENDITURE LIMITS FOR FSC CLASS 6665 1 1 1 A12APPENDIX G. EXPENDITURE LIMITS FOR FSC CLASS 6670 1 2 1 A 1 3APPENDIX H. EXPENDITURE LIMITS FOR FSC CLASS 6675 1 4 1 A 1 5APPENDIX I. EXPENDITURE LIMITS FOR FSC CLASS 6685 25 1 B07

2

A 3

TB 43-0002-36

Section I. INTRODUCTION

1. General.a. This bulletin implements the policies established by AR 750-1. It pro-vides one-time repair ecal inspections, procedures for computing repair cost estimates, and

expenditures limits, guidance for performing techni-

disposition instructions for for unserviceable excess equipment.b. This bulletin applies to US Army organizations, installations, activitiesand Reserve components worldwide that use and/or support FSC Group66 materiel.

2. Format of Technical Bulletin. This bulletin is divided into the following:a. Section II, One-Time Repair Expenditure Limits, This section Includesprocedures for determining expenditure limits for items listed under thecertain Federal Supply Classes.

b. Section III, Technical Inspections. This section Includes responsibilitiesfor performing inspections on repaired or evacuated itemsc. Section IV Computation of Repair Cost Estimates. This section in-cludes instructions for preparing repair cost estimates for items listedd. Section V, Disposition Instructions. This section includes disposition ofitems where the repair is beyond the capability of support level mainte-nance.e. Section VI, Appendices. This section contains a listing of related publi-cations referenced in this technical bulletin and expenditure limits for appli-cable stock classes.

Section II. ONE-TIME REPAIR EXPENDITURE LIMITS

3. Procedure.a. One-time expenditure limits are applicable each time an item IS repairedor overhauled. The one-time repair expenditure limit IS applied against thestandard price of the end item as listed a current Department of Army pub-lications.b. Due to the numerous National stock numbers, models and serial num-her ranges applicable to this equipment, no production year has been in-cluded in this bulletin for some equipment listed in Federal Supply Classes6605, 6335, 6370, and 6675. The procedure for determining the repair ex-penditure limits for these items is as follows:

(1) Identify the item bobtained from the equipment data plate, equipment log book or prop-

NSN and production year. This data may be

erty hook.(2) Obtain the standard price of the Item from Federal Supply Catalog.(3) Locate end item in appendices B, D, G, H and I of this bulletin.(4) Determine the percentage factor, columns 7 through 13, that is ap-plicable for the calendar year that repair or overhaul is required.(5) Multiply the end item standard price by the percentage factor todetermine the one-time allowable repair cost.

(1) Identify the item by NSN, make, model and serial number and pro=duction year. This data may be obtained from either the equipmentdata plate, the equipment log hook, or the property hook.(2) Obtain the standard price of the item fromor Federal Supply Catalog (ML) or SB 700-20.

Department of the Army

(3) Locate items in the appendix that contains the FSC Class to whichitem IS assigned.(4) Determine the percentage factor, columns 7 through 13, that is ap-plicable for the calendar year that repair or overhaul IS required.(5) Multiply the end item standard price by the percentage factor (4)above to determine the one-time allowable repair costs.

4. Expenditure Limits.a. The expenditure limit is 65 percent of acquisition cost ofassemblies, and recoverable repair parts applicable to the end item ofequipment that have remaining repair eligibility cited in this bulletin.

3A 4

TB 43-0002-36

Section III. TECHNICAL INSPECTIONS

performed in accordance with applicable equipment technical manuals andDA PAM 738-750. When equipment is to be repaired at support maintenance,the current serviceability standards applicable to the maintenance categoryperforming the repair will apply. Equipment that is to be evacuated to a depotfor overhaul will be inspected in accordance with Depot maintenance stan-dards. Guidance and assistance will be requested from Depot maintenance

activities when considered necessary to insure that only economically repaira-ble items are evacuated for overhaul. Items received by Depot maintenancefacilities for overhaul will be further evaluated to insure that they are economi-cally repairable.

6. Forms. DA Form 3590 (Repair Eligibility Data Sheet) and DA Form 2404(Equipment Inspection and Maintenance Worksheet) will be used to record re-sults of technical inspections. Instructions on preparation and use of theseforms are found in TB 43-0140 and DA PAM 736-750, respectively.

Section IV. COMPUTATION OF REPAIR COST ESTIMATES

7. Cost Factors. Refer to graphs 4-19 through 4-26 AR 750-1 for ex- 8. Procedures. Results of the technical inspections recorded on DA Formplanation of cost factors to be considered when computing repair cost esti- 2404 are transferred to section II, DA Form 2407, to compute direct labor andmates. direct materials cost Indirect expenses and other charges, that are applica-

ble, are added to direct labor end direct materials cost to obtain the total esti-mated repair cost.

Section V. DISPOSITION INSTRUCTIONS

9. Eligibility of Materiel for Evacuation to Depot Maintenance. All equip-ment covered by this bulletin is eligible for evacuation to Depot maintenancewhen the repairs required are beyond the capability of Support maintenanceand the cost of repairs will not exceed the one-time repair expenditure limits.

10. Disposition Instructions.a. Items will be reported to the National Inventory Control Point (NICP) fordisposition instructions under the following conditions:

(1) The estimated one-time repair cost exceeds the prescribed ex-penditure limits and waiver of limits is not authorized as provided for Inparagraph 4-30, AR 750-1.(2) The repairs required to restore an item to a serviceable conditionare beyond the capabilities of General Support maintenance regard-less of estimated repair cost, except as provided for in b below.

c. Requests from disposition instructions will be prepared in accordancewith AR 755-1.d. Report of unserviceable excess items on DD Form 1348 M-3 (DOD Sin-gle Line Detail Billing Card) will be accompanied by the inspection reporton DA Form 3590 in three copies. If the equipment being reported is a set.separate copies of DA Forms 3590 will be prepared for each major PEMAcomponent.e. Equipment will not be reported for disposition solely on the basis that itis over-age. Serviceable over-age equipment will be retained in use, un-less priority of organization mission warrants a replacement. Repairs toover-age equipment will be limited to the maintenance necessary to main-tain it in a safe, operable condition.Disposition of items in CONUS depot stock will be determined by theN I C P .

b. Depot repair is authorized in oversea commands without referral toNICP when repairs can be accomplished within the prescribed expenditurelimits.

Section VI. APPENDICES

12. Explanation of Columns.a. Column 1 - FSC or Stock Number. End item National stock numberslisted in numerical sequence.b. Column 2 - Item Identification. Item generic nomenclature, functionalcapability, make and model.c. Column 3 - Serial or USA Number identification and Remarks. This col-umn contains remarks when required to explain data in columns 4 and 5.d. Column 4 - Production Year. The year that item was manufactured. If nodata is shown, refer to equipment data plate, equipment log book, or theproperty book.

TB 43-0002-36

e. Column 5 - Serial No. Range of USA Number. The serial number rangesfor the production years listed in column 4.f. Column 6 - Yrs of Life Expectancy. The average life expectancy of theitem in yearsg. Columns 7 through 13 - Repair Limitations. The limiting years in whichthe percentage show at top of columns can be applied to the end itemstandard once as the authorized one-time repair expenditure. Where col-umns 7 through 13 are blank, the item IS not eligible for repair, except theminimum maintenance required to maintain it in a safe, operable conditionThis is subject to nonavailability of a replacement item and the bonafideneed for immediate repair and return to service

TB 43-0002-36

APPENDIX A

REFERENCES

Army Adopted/Other Items Selected for Authorization/List of Reportable Items

Calibration Requirements for the Maintenance of Army Materiel

Army Material Maintenance Concepts and PoliciesReporting, Utilization and Redistribution of Installation, US Army Materiel Command, and Overseas Command ExcessPersonal Property

Army Maintenance Management System (TAMMS)

A-1. Supply BulletinSB 700-20

A-2. Technical BulletinTB 43-01040

A-3. RegulationsAR-750-1AR-755-1

A-4. Miscellaneous PublicationsDA PAM 738-750

6A 7

TB 43-0002-36

APPENDIX BEXPENDITURE LIMITS FOR FSC CLASS 6605

FSC orNational

Stock No

1

6605-00-119-0481

6605-00-222-3881

6605-00-224-7735

6605-00-264-3922

6605-00-264-8031

6605-00-641-3573

6605-00-710-9452

6605-00-915-1251

6605-00-926-1214

7

A 8

APPENDIX CEXPENDITURE LIMITS FOR FSC CLASS 6625

T B 4 3 - 0 0 0 2 - 3 6

FSC orNational

Stock No.

1

6625-00-761-8701

6625-00-816-5627

6625-00-816-5628

6625-00-903-8174

6625-00-964-1091

6625-01-022-4958

6625-01-070-5283

6625-01-106-9373

6625-01-108-3651

8

A 9

A P P E N D I X D

E X P E N D I T U R E L I M I T S F O R F S C C L A S S 6 6 3 5

T B 4 3 - 0 0 0 2 - 3 6

FSC orNational

Stock No.

1

6635-00-357-4611

6635-00-382-9152

6635-00-393-0373

6635-00-514-4071

6635-00-530-1128

6635-00-542-1284

6635-00-566-5199

6635-00-641-2661

6635-00-641-3502

6635-00-641-3574

6635-00-664-4673

6635-00-752-8472

6635-00-892-4426

6635-00-900-8563

6635-01-030-6896

8

A 1 0

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X E

E X P E N D I T U R E L I M I T S F O R F S C C L A S S 6 6 4 0

FSC orNational

Stock No.

1

6640-00-300-4940

6640-00-538-2736

6640-00-902-9711

1 0

A l l

A P P E N D I X F

E X P E N D I T U R E L I M I T S F O R F S C C L A S S 6 6 6 5

T B 4 3 - 0 0 0 2 - 3 6

FSC orNationalStock No.

1

6665-00-138-7998

6665-00-144-7655

6665-00-179-5120

6 6 5 - 0 0 - 1 8 1 - 0 3 6 9

6665-00-181-0432

6665-00-537-4001

6665-00-821-9020

6665-00-878-4087

6665-00-912-1846

6665-00-966-9071

6 6 6 5 - 0 0 - 9 6 - 9 0 7 2

11

A 1 2

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X G

E X P E N D I T U R E L I M I T S F O R F S C C L A S S 6 6 7 0

FSC orNational

Stock No.

1

6670-00-164-0550

6670-00-164-0551

6670-00-164-0554

6670-00-164-0555

6670-00-164-0556

6670-00-164-0558

6670-00-164-0559

6670-00-164-0567

6670-00-240-5807

6670-00-254-4630

6670-00-361-1388

6670-00-401-3000

6670-00-401-3005

6670-00-401-7100

6670-00-401-7195

1 2

A 1 3

A P P E N D I X G

E X P E N D I T U R E L I M I T S F O R F S C C L A S S 6 6 7 0

- C o n t i n u e d

T B 4 3 - 0 0 0 2 - 3 6

FSC orNational

Stock No

1

6670-00-401-8400

6670-00-428-3066

6670-00-494-3604

6670-00-501-4000

6670-00-501-5050

6670-00-556-7707

6670-00-752-8539

6670-00-788-8700

6670-00-788-9000

6670-00-810-7780

6670-00-856-0875

1 3

A 1 4

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

E X P E N D I T U R E F O R F S C C L A S S 6 6 7 5

FSC orNational

Stock No.

1

6675-01-010-5948

6675-00-032-2391

6675-00-045-4515

6 6 7 5 - 0 0 - 0 9 - 8 0 3 4

6675-00-049-8035

6675-00-062-8579

6675-00-065-7502

6675-00-088-3652

6675-00-089-8884

6675-00-089-8885

1 4

A 1 5

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

FSC ORNational

Stock No

1

6675-00-089-8886

6675-00-151-5270

6675-00-189-8838

66675-00-189-8839

6675-00-189-8840

6675-00-189-8842

6675-00-189-8843

6675-00-190-5260

6675-00-190-5261

66750-00-190-5263

6675-00-180-5266

6675-00-222-2716

1 5

A 1 6

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

FSC orNationalStock No.

1

6675-00-227-5449

6675-00-232-8923

6675-00-232-8924

6675-00-232-8925

6675-00-232-8929

6675-00-232-8950

6675-00-232-8951

6675-00-232-8953

66750-00-232-8961

1 6

A 1 7

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

FSC orNationalStock No

1

6675-00-232-8968

6675-00-232-8969

6675-00-232-8972

6675-00-240-6602

6675-00-241-8032

6675-00-266-6897

6675-00-266-6897

6675-00-292-3399

6675-00-334-5353

6675-00-351-9138

6675-00-353-4468

1 7

A 1 8

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

T B 4 3 - 0 0 0 2 - 3 6

FSC orNational

Stock No.

1

6675-00-355-5445

6675-00-382-9130

6675-00-381-9131

6675-00-382-9135

6675-00-381-9140

6675-00-381-9138

6675-00-411-5446

6675-00-421-1302

6675-00-455-9200

6675-00-494-6548

1 8

B 1

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

E X P E N D I T U R E L I M I T S F O R F S C C L A S S 6 6 7 5

- C o n t i n u e d

FSC orNationalStock No

1

6675-00-514-4911

6675-00-514-5484

6675-00-526-6542

6675-00-542-1683

6675-00-553-8803

6675-00-566-8905

6675-00-585-1993

6675-00-585-5750

1 9

B 2

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

FSC orNational

Stock No.

1

6675-00-587-3767

6675-00-587-5090

6675-00-599-7019

6675-00-599-7020

6675-00-599-8256

6675-00-599-8263

6675-00-599-8264

6675-00-599-8268

6675-00-606-3378

2 0

B 3

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

FSC orNational

Stock No

1

6675-00-618-0938

6675-00-641-3468

6675-00-641-3521

6675-00-641-3522

6675-00-641-3523

6675-00-641-3549

6 6 7 5 - 0 0 - 6 1 - 3 5 5 3

6675-00-641-3569

6675-00-646-4871

6675-00-678-1340

2 1

B 4

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

FSC orNationalStock No.

1

6675-00-679-1341

6675-00-682-4635

6675-00-770-4958

6675-00-796-9439

6675-00-816-5624

6675-00-828-8397

6675-00-832-4649

6675-00-843-2603

6675-00-857-3600

6675-00-857-3601

2 2

B 5

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

FSC orNational

Stock No

1

6675-00-861-7939

6675-00-903-7660

6675-00-903-7661

6675-00-926-4505

6675-00-933-9532

6675-00-937-2954

6675-00-937-6883

6675-00-937-9861

6675-00-808-8027

2 0

B 6

T B 4 3 - 0 0 0 2 - 3 6

A P P E N D I X H

EXPENDITURE LIMITS FOR FSC CLASS 6675

- C o n t i n u e d

FSC orNationalStock No

1

6675-00-988-5225

6675-00-989-7609

6675-00-890-5993

6675-00-990-8748

2 4

B 7

T B 4 3 - 0 0 0 2 - 3 6

APPENDIX I

EXPENDITURE LIMITS FOR FSC CLASS 6685

FSC orNational

Stock No.

1

6685-00-873-1750

2 5

B 8

DENNIS J. REIMERGeneral, United States ArmyChief of Staff

DISTRIBUTION: To be distributed in accordance with DA Form 12-34-E block 2410, requirements for TB43-0002-36. [PIN: 020111-000]

TB 43-0002-36