7/28/2019 Tap a Manual

1/3

Mini Combo. Unit 7681 - Flows up to 25 SCFM

Features:

A 20 micron particulate filter removes water, pipe scale, dirt and rust. A regulator is used to reduce and

maintain the pressure at a level suitable for the work device. Lubricator is used to add lubricating oil inaerosol form into the compressed air line and increase the life of the work device.

Unit Sizes: 1/8" & 1/4"

TriStar Filter/Regulator/Lubricator Combinations - Flows up to 100 scfm

Features:

A screwdriver is the only tool needed to connect or disconnect unit. A insert interlocking feature allowssimple installation and removal in any location without disturbing the existing piping arrangement. Theregulator can be mounted in either the up or down position. Lubricator as well as regulator can be adjustedthrough a three position tamper resistant adjusting knobs This unique design allows unlimited adaptation toair preparation systems.Unit will permit use of standard size pipe nipples. Special optional diverter blocks supply air to secondarylocations.

7/28/2019 Tap a Manual

2/3

Unit Sizes: 1/4", 3/8", and 1/2"

Insert Pipe Sizes: 1/4", 3/8",1/2" and 3/4"

MidFlow & High Flow Filter/Regulator/Lubricator Combinations

Midflow Combo. Unit N33373 - Flows up to 100 SCFM

A 40 micron particulate filter removes harmful water, pipe scale and rust.A regulator is used to reduce andmaintain the pressure at a level suitable for the work device.The regulator can be mounted either up ordown.A lubricator is used to add oil in aerosol form into the compressed air line to increase the life of thework device.

Regulator and Lubricator adjustments are made thru three position tamper resistant adjusting knob.

Sizes: 3/8, , "

High flow Combo. Unit 3546M

A 40 micron particulate filter removes harmful water, pipe scale and rust.A regulator is used to reduce andmaintain the pressure at a level suitable for the work device.A Wick Style Lubricator is used to addlubricating oil into the compressed air system to increase the life of the work device.

Sizes: 3/4" & 1"

7/28/2019 Tap a Manual

3/3

Double Bolt Horizontal

Double Bolt Horizontal

Tube Turns Double Bolt Yoke Style Closures are available in pressures ranging from 285 PSI to 6170 PSI and

can be used in horizontal or vertical application. Standard designs are available in sizes ranging from 6" to 42"

and can be furnished in Carbon Steel, Stainless Steel or other materials depending on availability of raw

material.

Standard construction material is Carbon Steel made to ASME specifications i.e. SA105 or SA106 grade B/C for

the hub, SA516 grade 70 for the head, SA105, SA106 grade B/C or SA352 LCB for the yoke, SA193 B7 for the

yoke bolts and SA36 for structural components. O-ring material Buna-N is furnished unless another material is

specified. Yoke Bolts are coated with blue flourocarbon to lubricate the threads and prevent rust and corrosion

of these working parts (cadmium plated bolts are available on special order at a nominal extra charge.)

These closures can be equipped with sight glasses, drains, gauges, sampling ports, etc. The size and number of

the openings is dependent upon the thickness of the closure head and whether threaded or socket-weld

openings are utilized.