TANKS U.S. 2019 PRICE LIST...BAFFLE TANKS PARTS & ACCESSORIES 21664-40 BAF40 Conversion kit $130.00 21664-80 BAF80 Conversion kit 142.00 21664-120 BAF120 Conversion kit 153.00 21660

WELLMATE

PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE We reserve the right to correct pricing errors.

TANKS

U.S. 2019 PRICE LISTWM401 • EFFECTIVE: FEBRUARY 18, 2019 • SUPERSEDES ALL PREVIOUS PRICE LISTS

Table of ContentsDescription Page

HIGHLIGHTS 2

RESIDENTIAL CAPTIVE AIR TANKS

Residential Captive Air Models 3

COMMERCIAL & INDUSTRIAL TANKS

Non-ASME Commercial & Industrial Models 4

CAPTIVE AIR TANK ACCESSORIES

Captive Air Tank Serive Parts & Accessories 5-6

RESIDENTIAL NON-CAPTIVE AND IN-LINE TANKS

Residential Non-Captive Air Models 7

In-Line Tanks 7

NON-CAPTIVE AIR TANK ACCESSORIES

Non-Captive Air Tank Service Parts & Accessories 8-9

TERMS & CONDITIONS OF SALE 10-12

WELLMATEHIGHLIGHTS

2 WM401 (02/27/19)

*WellMate Baffle Tanks - standard UT tank multiplier applies to these tanks (see page 7 & 8)

We value our partnerships and have confidence in the high-quality products we continue to deliver. Remember to accept no imitations, and insist on genuine, trusted Pentair WellMate products, every time.

Catalog Number Description Price ($) Per Unit

WELLMATE BAFFLE TANKS

CH34784 1653 UT40 BAFFLE FACTOR $575.00

CH34785 2162 UT80 BAFFLE FACTOR 863.00

CH34786 2470 UT120 BAFFLE FACTOR 1,007.00


BAFFLE TANKS PARTS & ACCESSORIES

21664-40 BAF40 Conversion kit $130.00

21664-80 BAF80 Conversion kit 142.00


21660 BAF Air Vent Adapter 52.00

WELLMATETANKS

3 WM401 (02/27/19)

Residential Captive Air ModelsCatalog Number Model Number Capacity

(Gallons)Dimensions

(Dia. x Height)Max. Oper. Pressure

Unit Ship Weight Pallet Qty. Price ($)

Per Unit

WM SERIES VERTICAL TANKS – (C - CLASSIC MODELS)

CH30837 WM-4 C 14.5 16” x 27-1/2” 125 psig 17 lbs. 9 $422.00

CH30840 WM-6 C 19.8 16” x 33-1/2” 125 psig 21 lbs. 9 452.00

CH30854 WM-9 C 29.5 16” x 44-1/2” 125 psig 27 lbs. 9 707.00

CH30866 WM-12 C 40.3 16” x 57-5/8” 125 psig 37 lbs. 9 901.00

CH30951 WM-14WB C 47.1 21” x 42” 125 psig 51 lbs. 4 917.00

CH31050 WM-20WB C 60 24” x 42-3/8” 125 psig 61 lbs. 4 1,078.00

CH32855 WM-23 C 79.6 21” x 62” 125 psig 66 lbs. 4 1,156.00

CH31056 WM-25WB C 86.7 24” x 55-1/4” 125 psig 84 lbs. 4 1,254.00

CH31062 WM-35WB C 119.7 24” x 74-1/4” 125 psig 108 lbs. 4 1,842.00

WM SERIES LOW-PROFILE TANKS – (C - CLASSIC MODELS)

CH31850 WM-6LP C 19.3 24” x 21” 125 psig 28 lbs. 8 493.00

CH31957 WM-10LP C 34.5 24” x 29-7/8” 125 psig 36 lbs. 8 806.00

WM SERIES VERTICAL TANKS – (CLASSIC QUICK CONNECT MODELS)

CH34717 WM-4 Classic QC

14.5 16” x 27-1/2” 125 psig 17 lbs. 9 422.00

34718 WM-6 Classic QC

19.8 16” x 33-1/2” 125 psig 21 lbs. 9 452.00


29.5 16” x 44-1/2” 125 psig 27 lbs. 9 707.00


40.3 16” x 57-5/8” 125 psig 37 lbs. 9 901.00

34721 WM-14WB Classic QC

47.1 21” x 42” 125 psig 51 lbs. 4 917.00

CH34723 WM-20WB Classic QC

60 24” x 42-3/8” 125 psig 61 lbs. 4 1,078.00

CH34722 WM-23 Classic QC

79.6 21” x 62” 125 psig 66 lbs. 4 1,156.00

34724 WM-25WBClassic QC

86.7 24” x 55-1/4” 125 psig 84 lbs. 4 1,254.00

34725 WM-35WBClassic QC

119.7 24” x 74-1/4” 125 psig 108 lbs. 4 1,842.00

WM SERIES LOW-PROFILE TANKS – (CLASSIC QUICK CONNECT MODELS)

34726 WM-6LPClassic QC

19.3 24” x 21” 125 psig 28 lbs. 8 493.00

CH34727 WM-10LPClassic QC

34.5 24” x 29-7/8” 125 psig 36 lbs. 8 806.00

WELLMATETANKS

4 WM401 (02/27/19)

Non-ASME Commercial & Industrial ModelsCatalog Number

Model Number

Capacity (Gallons)

Dimensions (Dia. x Height)

Max Oper. Pressure

Unit Ship Weight

Pallet Quantity

Price ($) Per Unit

E-SERIES CAPTIVE AIR TANKS (NON-ASME)

CH33051 WM-60 200 30” x 80” 125 psig 225 lbs. $7,728.00

CH33050 WM-80 270 36” x 81” 125 psig 273 lbs. 9,333.00

E-SERIES RETENTION TANKS (NON-ASME)

CH33140 RT-200 200 30” x 80” 125 psig 205 lbs. 5,462.00

CH33141 RT-270 270 36” x 81” 125 psig 248 lbs. 6,465.00


E - SERIES CAPTIVE AIR TANK ACCESSORIES

CH3285 WM-60 Air Cell Repl. Kit 806.00

CH3286 WM-80 Air Cell Repl. Kit 1,066.00

CH2694-114 O-Ring - Top Adapter 5.26

1,006.00

WELLMATE

5 WM401 (02/27/19)

ACCESSORIES

Captive Air Tank Service Parts & AccessoriesCatalog Number Description Price ($) Per Unit

CLASSIC - AIR CELL REPLACEMENT KITS (INCLUDES AIR CELL, WASHERS, O-RINGS & INSTRUCTIONS)

CH4989 WM-4 / WM0060 PEU Air Cell Replacement Kit $154.00

CH3133-2 WM-6 / WM0075 PEU Air Cell Replacement Kit 176.00



CH4466 WM-14WB / WM0180 PEU Air Cell Replacement Kit 272.00


CH15304 WM-23 / WM0300 PEU Air Cell Replacement Kit 308.00



CH12762 WM-6LP/ WM-LP-075 PEU Air Cell Replacement Kit 176.00

CH12763 WM-10LP / WM-LP-130 PEU Air Cell Replacement Kit 211.00

QC - CAPTIVE AIR TANK SERVICE PARTS & ACCESSORIES

CH20615-2K WM QC Drain Kit (16” Dia Tanks) w/ adapters 35.00

CH20041-2K WM QC Drain Kit (21”- 24” Dia Tanks) w/ adapters 35.00

CH10795 Base 16” Dia Tanks (WM-4, 6, 9, 12) QC Models 13.86

CH10798 Base 21” & 24” Dia Tanks (WM-20, 23, 25, 35) QC Models 36.00

40576 H-Clip 0.87

CH20520 1” MNPT Connector Noryl Kit - WM Series QC 17.33

CH20521 1-1/4” MNPT Connector Noryl Kit - WM Series QC 17.33

CH20524 1” & 1-1/4” Connector PVC Socket Kit - WM Series QC 17.33

CH20370 1” & 11/4” Connector Brass Sweat Kit 52.00

40951 O-Ring, -220 (Fits all Quick Connect connectors) 1.51

ACCESSORIESWELLMATE

6 WM401 (02/27/19)


CLASSIC - CAPTIVE AIR TANK SERVICE PARTS & ACCESSORIES

CH5484-1 1” Drain Assy. (WM-4, 6, 9, 12, WM6LP, WM10LP) $48.00

CH4233 1-1/4” Drain Assy. (WM-14,20,23,25,35WB) 75.00

CH10795 Base 16” Dia Tanks (WM-4, 6, 9, 12) 13.86

CH21293 WM Pole PC Cap w/ Valve 11.55

CH10798 Base 21” & 24” Dia Tanks (WM-20, 23, 25, 35) 36.00

CAPTIVE AIR TANK ACCESSORIES

CH13279 O-Ring Lubricant 2.89

CH11449 Pump Mount Bracket 66.00

CH11774 Valve Extension 28.00

CH11119 Tank Tote 49.00

CH11563 Valve Stem Air Chuck 47.00

CH4185UG Surface Air Check Kit 38.00

CH14743 Base Extender (16” Diameter Tanks) 24.26

CAPTIVE AIR CUTAWAY TANKS

CH34728 WM6 Quick Connect Cutaway 223.00

40576

CH11449

CH11119

CH11774

CH4233

CH5484-1

WELLMATE

7 WM401 (02/27/19)

TANKS

Residential Non-Captive Air ModelsCatalog Number Model Number Capacity

(Gallons)Dimensions (Dia. x

Height)Max Oper. Pressure

Unit Ship Weight

Pallet Quantity

Price ($) Per Unit

UT - UNIVERSAL TANKS - QUICK CONNECT

CH31385-1 UT-30 QC 30 16” x 46” 75 psig 23 lbs. 9 $411.00

CH31301-1 UT-40 QC 40 16” x 58-3/4” 75 psig 31 lbs. 9 459.00

CH31433-1 UT-40SQ QC 40 21” x 37-1/2” 75 psig 33 lbs. 4 471.00

CH31309-1 UT-80 QC 80 21” x 64-1/4” 75 psig 53 lbs. N/A 743.00

CH31312-1 UT-120 QC 120 24” x 74-1/4” 75 psig 77 lbs. N/A 982.00

HP – HYDROPNEUMATIC TANKS – QUICK CONNECT

CH31666-1 HP-7 QC 30 16” x 45-1/2” 75 psig 24 lbs. 9 501.00

CH31667-1 HP-9 QC 40 16” x 58-1/4” 75 psig 33 lbs. 9 554.00

CH31735-1 HP-8SQ QC 40 21” x 37” 75 psig 34 lbs. 4 554.00

CH31668-1 HP-18 QC 80 21” x 63-3/4” 75 psig 55 lbs. N/A 846.00

CH31669-1 HP-26 QC 120 24” x 74-1/4” 75 psig 81 lbs. N/A 1,107.00

BF - BAFFLE TANKS

CH34784 UT40 Baffle Tank 40 16” x 58-3/4” 75 psig 32 lbs. 9 575.00

CH34785 UT80 Baffle Tank 80 21” x 64-1/4” 75 psig 54 lbs. N/A 863.00

CH34786 UT120 Baffle Tank 120 24” x 74-1/4” 75 psig 77 lbs. N/A 1,007.00

SP – SIDEPORT TANKS (DOES NOT INCLUDE AIR VOLUME CONTROL)

CH33020 SP-7 30 16” x 43-3/4” 100 psig 26 lbs. 9 373.00

CH33021 SP-9 40 16” x 56-1/2” 100 psig 35 lbs. 9 386.00

CH33022 SP-9SQ 47 21” x 41-1/4” 100 psig 48 lbs. 4 403.00

CH33023 SP-18 80 21” x 62” 100 psig 67 lbs. 1 632.00

CH33024 SP-26 120 24” x 72-1/2” 100 psig 97 lbs. 1 797.00

In-Line TanksCH32856 WM01 2 8” x 12” 100 psig 5 lbs. N/A 130.00

CH32857 WM02 4.6 11” x 15” 100 psig 9 lbs. N/A 183.00

WELLMATE

8 WM401 (02/27/19)

ACCESSORIES

Non-Captive Air Tank Service Parts & Accessories Catalog Number Description Price ($) Per Unit

QUICK CONNECT UT & HP SERVICE PARTS & ACCESSORIES

CH20520 1” MNPT Connector Noryl Kit $17.33

CH20521 1-1/4” MNPT Connector Noryl Kit 17.33

CH20524 1” & 1-1/4” Connector PVC Socket Kit 17.33

CH20370 1” & 1-1/4” Connector Brass Sweat Kit 52.00

CH20347 HP Top Vent Adapter - Quick Connect Kit 43.00

CH31973-1 HP7 / UT30 Quick Connect Cutaway 171.00

CH20287 HP 7 AVC Assembly - QC (Use with UT 30) 119.00

CH20288 HP 8SQ AVC Assembly - QC (Use with UT 40 SQ) 119.00




40576 H-Clip, Plastic 0.87

40951 O-Ring - 220 1.51

BAFFLE TANK PARTS & ACCESSORIES




21660 BAF Air Vent Adapter 52.00

OLD STYLE NON-CAPTIVE AIR TANK SERVICE PARTS & ACCESSORIES

CH10732 HP-7, AVC Assembly 119.00

CH11177 HP-8SQ AVC Assembly 117.00

CH10733 HP-9 AVC Assembly 121.00



CH14937 HP Top Vent Adapter 50.00

CH14938 UT Top Adapter 1-1/4” - Threaded 41.00

CH19605 UT Top Adapter 1-1/4” - Glue Socket 36.00

CH2694-176 UT Top Adapter, O-Ring 2.31

CH14307 1/4” NPT Plug 1.74

CH20520CH20521

CH20524

CH20370

CH20347

CH20287-CH20291

CH10732-CH10735

40576

CH14937

ACCESSORIESWELLMATE

9 WM401 (02/27/19)


UT, HP & SP SERVICE PARTS & ACCESSORIES

CH10795 Base UT-30/ HP-7, UT-40/ HP-9 $13.86

CH10798 Base UT-40SQ/ HP-8SQ & UT-120/ HP-26 36.00

CH10991-1 UT, HP, SP Drain Assembly w/ O-ring 101.00

CH2694-112 O-Ring Bottom Drain UT, HP, SP 1.16

CH3929-5 Micronizer/Air Injector 124.00

CH3833-1 Ball Check for Micronizer 3.47

CH3832 Black Cap - Micronizer 1.74

CH19426 Vacuum Breaker 1/4” NPT 27.00

CH10724 Vacuum Breaker 1-1/2” NPT 160.00

CH5551 Air Volume Control 77.00

CH11068 Adapter, Internal for UT / HP Drain Assembly 9.24

CH20056 SP-35 & SP 50 Drain Kit 320.00

CH10991-1

CH3929-5

CH5551

CH11068

CH19426

10 WM401 (02/27/19)

WELLMATETERMS & CONDITIONS OF SALE

LEGAL EFFECT: The following terms and conditions are a part of this order. Additional or different terms of Buyer’s purchase order or other form of acceptance or any other form of Buyer are rejected in advance and shall not become a part of the Order. Seller’s quotation is an offer to sell under the terms and conditions stated herein. All offers to purchase by Buyer or orders or contracts of sale resulting from such Quotations are subject to final acceptance in writing by an Officer of the Seller. Seller’s rights and remedies under this Quotation and the Order are in addition to, not in substitution of, all other rights and remedies available to Seller under any applicable provision of law, regulation or court decision. Seller may suspend its performance of the Order if Buyer defaults in the performance of its duties under the Order or under any other agreement between the Buyer and Seller. No employee, agent, dealer, or distributor of Seller has any authority to change or enlarge the terms of this Quotation or the Order. No change shall be valid unless it is in writing and signed by an authorized Officer of Seller. In the event that any provision of these terms and conditions is deemed to be invalid or unenforceable, the parties agree that such invalidity or unenforceability shall not invalidate or render unenforceable the remainder of these terms and conditions, and the remaining terms and conditions shall continue in full force and effect. Unless otherwise mutually agreed, the terms of any Order resulting from this Quotation shall be interpreted and enforced in accordance with the laws applicable at the Seller’s Home Office or primary U. S. management location.

SCOPE OF SUPPLY: As an equipment supplier, Seller will provide equipment per (1) Seller’s quotation only, or (2) where approved in writing by an engineer-employee of Seller, per the technical portion of the specifications as submitted, clarified and approved by Seller. Any terms and conditions other than those stated herein are excluded. Buyer is fully responsible for (including payment of the cost of) installation of all equipment sold under this order.

ASSIGNMENT: No assignment or transfer of interests of any part of this contract shall be valid without the expressed written consent of both parties.

CANCELLATION: Buyer cannot cancel or alter the Order without the Seller’s written consent. If Seller grants such consent, Buyer will reimburse Seller for all of Seller’s losses and expenses caused by such cancellation or alteration, including without limitation all of Seller’s additional costs caused by changes in design or specifications, or by product revisions, and all consequential damages incurred by Seller as a result of such cancellation or alteration. If Buyer cancels the Order, Buyer shall pay Seller (i) a minimum cancellation charge of 15 percent of the purchase price; and (ii) any damages and expenses described in this paragraph that exceed 15 percent of the purchase price.

PRICES: Unless otherwise mutually agreed in writing, prices quoted by the Seller shall be firm for a period of 60 days after quotation, or, after receipt of an acceptable purchase order from the Buyer, for the duration of the contract, not to exceed one year after the Seller’s receipt of the purchase order.

TERMS OF PAYMENT: Unless otherwise mutually agreed, the terms of payment shall be 100% net 30 days after shipment, paid from the Seller’s invoices, contingent on approval by the Seller’s Credit Manager. These terms apply to partial and complete shipments. Buyer agrees to make full payment under these terms without setoff. Monies held beyond these terms may be subject to interest at the maximum legal rate, and may result in lien proceedings or the termination of warranties and suspension of services. If, in Sellers judgment, Buyer’s financial condition at the time the equipment is ready for shipment does not warrant the extension of credit to Buyer, Seller may require full payment, in cash or via letter of credit, prior to making shipment. If Seller does not receive full cash payment within fifteen (15) days after it notifies Buyer that such payment is required and that the equipment is ready for shipment, Seller may cancel the Order as to any unshipped item. In that event, Buyer will pay Seller the cancellation charges, damages and expenses, as described under CANCELLATION. Buyer will pay all costs and expenses, including reasonable attorney fees, incurred by Seller in collecting any amounts due, including interest, if any proceeding is initiated by or against Buyer under any Bankruptcy, insolvency, and/or collection activities.

TAXES: Seller’s quoted prices do not include any present and future sales, use, occupation, license, excise, and other taxes, permits, tariffs, duties, or fees with respect to the sale, delivery or use of the equipment. Any applicable taxes or fees will be charged at rates in effect at time of shipment. Seller is required by law to collect all applicable sales and use taxes unless an appropriate exemption certificate is provided by the Buyer. Seller’s quoted prices include all taxes and permits applicable throughout the manufacturing process.

SHIPMENT: Except as otherwise mutually agreed, domestic shipment will be EXW, Seller’s point of shipment, international shipments will be FCA Seller’s point of shipment. Buyer will pay all transportation charges. Seller’s quoted prices are based on shipment immediately upon readiness, with no delays or storage. Work which has been suspended or stored for the Buyer’s convenience may be billed in place, and applicable storage charges shall accrue. If Buyer does not furnish exact shipping instructions, Seller will select, in its discretion, the means of shipment. Seller will not be liable for any loss resulting from such selection. The time of delivery is an estimate only, and Seller may change such time if Seller does not receive the information and approvals necessary to proceed with the manufacture of the equipment. Buyer agrees to inspect all deliveries immediately. Any claim for shortages or damage must be made in writing within five (5) days after Buyer receives a shipment, and if not made, shall be deemed waived. Any other claim by Buyer, other than claims under the WARRANTY stated below, shall be made within thirty (30) days after Buyer receives shipment, and if not made shall be deemed waived. Seller is not responsible for loss or damage in transit after having received an “In Good Order” receipt from the carrier. Buyer will make all claims for loss or damage in transit against the carrier.

SHIPMENT UPON READINESS: Seller’s quoted prices are based on shipment immediately upon readiness, with no delays or storage. Work that has been suspended or stored for the Buyer’s convenience shall be billed in place, and applicable storage charges shall accrue. Promise date, shipment date or completion of manufacture date of the equipment may be changed only with Seller’s written consent. If shipment is delayed at Buyer’s request, Buyer will make any payments due under the Order as if the equipment has been shipped on the date when it was ready for shipment. If completion of manufacture is delayed at Buyer’s request, Seller may require payment according to percentage of completion. Buyer shall have the risk of loss with respect to equipment held for Buyer, and Seller may charge Buyer for storage.

INSURANCE: Buyer shall bear all risk of and responsibility for damage or loss to the equipment after Seller delivers the equipment to the carrier at its point of shipment. Buyer agrees to provide and maintain adequate insurance for the equipment supplied under the Order to fully protect Seller’s interest during the time between delivery and final payment. Loss or damage by fire or other causes during such period shall not relieve Buyer from its obligations under the Order. Upon request, Seller will provide Buyer with its standard ACORD Certificate of Insurance. Seller cannot name others as additional insureds.

TITLE AND LIEN RIGHTS: If Buyer defaults in its obligations under the Order before the price (including any notes given therefore) of the equipment has been fully paid in cash, Seller may take any and all actions permitted by law to protect its interests including, where permissible, repossession of such equipment. Seller agrees to indemnify Buyer from liens filed by Seller’s workforce or subcomponent vendors. Seller’s statements of conditional, partial or complete lien waivers, consistent with payments received, will be furnished on request. The furnishing of such waivers shall not be a condition precedent to payment. Buyer agrees to cooperate fully with Seller in the filing of any financial statements or other documents necessary to perfect such interests and liens.

PATENT INFRINGEMENT: Seller will defend Buyer and the user of the equipment to the extent of any rightful claim that any equipment and parts of Seller’s manufacture furnished under the Order infringe upon any published United States patent, and Seller will pay all damages and costs awarded by a court of competent jurisdiction with respect to such claim. The Buyer or user must promptly notify Seller of any such claim, and cooperate fully with Seller in the defense of such claim, or Seller will have no duty under this paragraph. Buyer will defend and indemnify Seller against patent infringement claims relating to equipment and parts that are not manufactured by Seller to the same extent as Seller agrees to defend and indemnify Buyer with respect to patent infringement claims relating to equipment and parts of Seller’s manufacture.

DESIGN RIGHTS: Seller sells and transfers ownership of the agreed equipment and services only; not the design rights, development data, patents, tooling, patterns, methods or copyrights. All such rights in data are expressly reserved. In lieu of such rights, Seller will provide use of such form, fit and function information as is necessary for the Buyer’s approval, installation, fit-up and operation of the equipment.

WARRANTY: Seller warrants equipment (and its component parts) of its own manufacture against defects in materials and workmanship under normal use and service for one (1) year from the date of installation or start-up, or for eighteen (18) months after the date of shipment, whichever occurs first. Seller does not warrant accessories or components that are not manufactured by Seller; however, to the extent possible, Seller will assign to Buyer its rights under the original manufacturer’s warranty, without recourse to Seller. Buyer must give Seller notice in writing of any alleged defect covered by this warranty (together with all identifying details, including the serial number, the type of equipment, and the date of purchase) within thirty (30) days of the discovery of such defect during the warranty period. No claim made more than 30 days after the expiration of the warranty period shall be valid. Guarantees of performance and warranties are based on the use of original equipment manufactured (OEM) replacement parts. Seller assumes no responsibility or liability if alterations, non-authorized design modifications and/or non-OEM replacement parts are incorporated If requested by Seller, any equipment (or its component parts) must be promptly returned to Seller prior to any attempted repair, or sent to an authorized service station designated by Seller, and Buyer shall prepay all shipping expenses. Seller shall not be liable for any loss or damage to goods in transit, nor will any warranty claim be valid unless the returned goods are received intact and undamaged as a result of shipment. Repaired or replaced material returned to customer will be shipped EXW (Domestic Shipments) or FCA (International Shipments)., Seller’s factory. Seller will not give Buyer credit for parts or equipment returned to Seller, and will not accept delivery of any such parts or equipment, unless Buyer has obtained Seller’s approval in writing.

The warranty extends to repaired or replaced parts of Seller’s manufacture for ninety (90) days or for the remainder of the original warranty period applicable to the equipment or parts being repaired or replaced, whichever is greater. This warranty applies to the repaired or replaced part and is not extended to the product or any other component of the product being repaired.

Repair parts of its own manufacture sold after the original warranty period are warranted for a period of one (1) year from shipment against defects in materials and workmanship under normal use and service. This warranty applies to the replacement part only and is not extended to the product or any other component of the product being repaired. Seller may substitute new equipment or improve part(s) of any equipment judged defective without further liability. All repairs or services performed by Seller, which are not covered by this warranty, will be charged in accordance with Seller’s standard prices then in effect.

WELLMATE

11 WM401 (02/27/19)

TERMS & CONDITIONS OF SALE

THIS WARRANTY IS THE SOLE WARRANTY OF SELLER AND SELLER HEREBY EXPRESSLY DISCLAIMS AND BUYER WAIVES ALL OTHER WARRANTIES EXPRESSED, IMPLIED IN LAW OR IMPLIED IN FACT, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Seller’s sole obligation under this warranty shall be, at its option, to repair or replace any equipment (or its component parts) which has a defect covered by this warranty, or to refund the purchase price of such equipment or part. Under the terms of this warranty, Seller shall not be liable for (a) consequential, incidental, collateral, special or liquidated losses or damages; (b) equipment conditions caused by normal wear and tear, abnormal conditions of use, accident, neglect, or misuse of said equipment; (c) the expense of, and loss or damage caused by, repairs or alterations made by anyone other than the Seller; (d) damage caused by abrasive materials, chemicals, scale deposits, corrosion, lightning, improper voltage, mishandling, or other similar conditions; (e) any loss, damage, or expense relating to or resulting from installation, removal or reinstallation of equipment; (f) any labor costs or charges incurred in repairing or replacing defective equipment or parts, including the cost of reinstalling parts that are repaired or replaced by Seller; (g) any expense of shipment of equipment or repaired or replacement parts; or (h) any other loss, damage or expense of any nature.

The above warranty shall not apply to any equipment which may be separately covered by any alternate or special warranties.

INDEMNIFICATION: Seller shall defend, indemnify and hold harmless Buyer from and against any and all Liabilities arising out of (1) Seller’s negligence, (2) Seller’s violation of laws, rules, ordinances or regulations, (3) Seller’s misrepresentation, misapplication, installation or maintenance of the products; and (4) death of or injury to any person, or damage to any property, resulting from, or relating to, Seller products or services … all except to the extent same is alleged to have been caused by the negligence of Buyer, its affiliates or their officers, directors, employees or agents. Buyer shall defend, indemnify and hold harmless Seller from and against any and all liabilities arising out of (1) Buyer’s negligence, (2) Buyer’s violation of applicable laws, rules, ordinances or regulations (including those described below), and (3) Buyer components or Buyer equipment into which Seller’s equipment is installed, including but not limited to claims that such components or equipment (or any portion thereof) infringe upon the intellectual property rights of a third party.

PERFORMANCE: In the absence of Certified Pump Performance Tests, equipment performance is not warranted or guaranteed. Performance curves and other information submitted to Buyer are approximate and no warranty or guarantee shall be deemed to arise as a result of such submittal. All testing shall be done in accordance with Seller’s standard policy under Hydraulic Institute procedures.

LIABILITY LIMITATIONS: Under no circumstances shall the Seller have any liability under the Order or otherwise for liquidated damages or for collateral, consequential, incidental, punitive or special damages or for loss of profits, or for actual losses or for loss of production or progress of construction, regardless of the cause of such damages or losses. In any event, Seller’s aggregate total liability under the Order or otherwise shall not exceed the contract price.

ACTS OF GOD: Seller shall in no event be liable for delays in delivery of the equipment or other failures to perform caused by fires, acts of God, strikes, labor difficulties, acts of governmental or military authorities, delays in transportation or procuring materials, or causes of any kind beyond Seller’s control.

COMPLIANCE WITH LAW: With respect to the purchase, sale, resale and servicing of these goods, Buyer shall comply with all applicable laws, trade embargos, regulations, orders and other restrictions and - without limiting the generality of the foregoing - do the following.

A. No Improper Means of Obtaining Business; No Bribes; No Kickbacks; Anti-Boycott. Third Party and Pentair intend that no payments or transfers of value shall be made which have the purpose or effect of public or commercial bribery, acceptance of or acquiescence in extortion or kickbacks or other unlawful or improper means of obtaining business. Third Party and Pentair will not, directly or indirectly, pay, offer, authorize or promise any monies or anything of value (such as gifts, contributions, travel, or entertainment) to any person or organization, including any employee of Third Party’s or Pentair’s customers, or any Government Official (which includes any employee or official of any governmental authority, government owned or controlled entity, public international organization or political party or any candidate for political office) for the purpose of influencing their acts or decisions. Third Party will take appropriate actions to ensure that any person representing or acting under its instruction or control (“Representatives”) will also comply with this Certificate. Third Party will not request that Pentair take any action which is prohibited or penalized under any anti-boycott law or regulation and any such request will be deemed null and void. Nothing in this Certificate or in any such request will be construed to require an agreement by Pentair to take action which is prohibited or penalized under any anti-boycott law or regulation.

B. NoConflicts.No Government Officials. Except as disclosed in writing to Pentair, Third Party represents that it does not believe or have any reason to believe that there are any actual or potential conflicts of interest regarding its relationship with Pentair, including family members who could benefit from the commercial relationship between Third Party and Pentair. Neither Third Party nor any of Representatives are or have any family members who are Government Officials in a position to influence Third Party’s commercial relationship with Pentair.

C. Accurate Books and Records. Third Party and Representatives will maintain complete and accurate books and records in accordance with generally accepted accounting principles in Third Party’s or Representative’s jurisdiction, consistently applied, properly and accurately recording any and commission, compensation, reimbursement or other payment (“Payments”) made by Third Party and Representatives in performance of, on behalf of or related to work for Pentair. Third Party and Representatives will maintain a system of internal accounting controls reasonably designed to ensure that its assets are used only in accordance with its management directives and that it maintains no off-the-book accounts.

D. AdditionalCertification.A party will, when and as may be requested by the other party from time to time, provide to the other party additional written certification in form and substance satisfactory to the other party that said party is in compliance with this Certificate.

E. No Payments for Improper Activities. Pentair will not be required under any circumstances to take any action or make Payments that Pentair believes, in good faith, would cause it or its affiliated companies to be in violation of any Anti-Corruption Laws (Anti-Corruption Laws include, collectively, the United States Foreign Corrupt Practices Act, the UK Bribery Act 2010, laws under the OECD Anti-Bribery Convention and local anti-corruption laws).

F. Audit Rights. If at any time Pentair believes in good faith that Third Party has breached the warranties, representations or agreements in this Certificate, Pentair has the right to select an independent third party to conduct an audit at Pentair’s expense, to verify Third Party’s adherence to the terms in this Section. Third Party will fully cooperate in such audit.

G. Data Privacy. Pentair is committed to respecting the privacy of all persons and complies with applicable data privacy laws. Pentair may collect, process and transfer personal data related to the Third Party business relationship to and between Pentair, its affiliates and business partners wherever they may be located throughout the world, for the purposes of evaluating the Third Party’s experience and qualifications and implementing any business. Third Party has the right to: (a) request access to this data; (b) rectify or cancel any inaccurate or expired data; and (c) object to any processing that does not conform to these purposes. Third Party may exercise its rights by writing to Pentair at [email protected] or to such other location as Pentair may designate.

H. Prohibited Trade. Third Party will not sell, re-export or transfer any products or technical information or services supplied under this Certificate to any other countries except in full compliance with all applicable governmental requirements, including but not limited to applicable economic sanctions and constraints administered by the U.S. Treasury Department and applicable export control measures administered by the U.S. Department of Commerce and U.S. Department of State, any other U.S. government agencies and measures administered by the European Union or the government agencies of any other countries. Without limiting the foregoing, Third Party will not sell, re-export or transfer any products or technical information or services supplied by Pentair to Iran, North Korea, Syria, Cuba and North Sudan, including any entities or persons in those countries, either directly or indirectly. Any goods subject to this Certificate will be used solely by civil end users for civil end use, and will not be used in relation to nuclear, biological, chemical, or terror-related weapons or missiles capable of delivering those weapons. These regulations apply, no matter whether Third Party is the ultimate consignee and end user of these products or is a distributor or other contractor intending to re-sell these goods.

I. Notification. Third Party will notify Pentair promptly if (a) Third Party or any of Representatives have reason to believe that a breach of this Certificate has occurred or is likely to occur; or (b) if any conflicts of interest arise after the signing of this Certificate; or (c) if Third Party or any of Representatives or their family members become a government official or political party candidate in a position to influence Third Party’s commercial relationship with Pentair. Third Party will send all such notices to [email protected].

J. Breach and Termination. Termination Rights. Any breach of the warranties, representations or agreements in this Certificate will constitute a material breach of this Certificate and be grounds for immediate termination for cause of this Certificate and/or any order and Pentair may withhold any Payments until such time that Pentair has received confirmation to its reasonable satisfaction that no breach has occurred or will occur. Third Party will indemnify and hold Pentair harmless against any actions, legal claims, demands, proceedings, losses, damages, costs, expenses and other liabilities of whatever nature resulting from Third Party’s breach of the representations, warranties and agreements contained in the Certificate. Pentair reserves the right to refuse to enter into or perform any order, and to cancel any order, if Pentair in its sole discretion determines that such order could violate any applicable law or regulation of the United States, or any other governments. The parties agree that any such refusal or cancellation of any order, or termination of the Certificate by Pentair, as described above, will not constitute a breach of any of Pentair’s obligations under this Certificate, and the parties hereby waive any and all claims against Pentair for any loss, cost or expense related thereto.

All Pentair trademarks and logos are owned by Pentair. All other brands or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.

WM401 (02/27/19) ©2019 Pentair plc. All Rights Reserved.

293 Wright Street | Delavan, WI 53115 | Ph: 888.782.7483 | Orders Fax: 800.426.9446 | pentair.com/pentair-wellmate

Orders Email: [email protected] | Tech Support Email: [email protected]

US EXPORT NOTIFICATIONS:

All sales of goods or technology are in compliance with the Export Administration Regulations of the United States. Diversion contrary to U.S. law is prohibited Seller will not participate in the Arab League Boycott against Israel. Seller therefore assumes the following to be correct – and Seller will interpret the fact of Buyer ordering from Seller to confirm Buyer agreement to follow these same rules. The purchased goods will be used solely by civil end users for civil end use, and will not be used in relation to nuclear, biological, chemical, or terror-related weapons or missiles capable of delivering those weapons (unless further described below). The goods will not be re-exported or sold to a third party unless further described below. Buyer shall not request or expect Anti-Israel language (as desired by the Arab League Boycott against Israel) in any communications with the seller at all. These regulations do apply, no matter whether Buyer is the ultimate consignee and end user of these products, Buyer will not be re-selling them, or Buyer is a contracted distributor, intending to re-sell these goods to customers within your own country who are also legal customers in the eyes of the United States, or a contracted distributor intending to re-sell these goods to customers in multiple countries, who are also legal customers in the eyes of the United States.

ACCEPTANCE: These terms and conditions shall constitute the entire agreement, and all other terms and conditions of any origin are excluded. Unless otherwise advised by the Buyer within ten days after Seller’s acknowledgment of an order, Seller will proceed with processing of such order with the understanding that the Buyer is in full agreement with all provisions stated herein.

Transaction terms: Incoterms 2010 Rules.

Dates: This invoice date represents the date of cargo pickup from Seller’s facility.

• On domestic sales: Transfer of both title and risk of loss shall occur upon pickup from seller’s site.

• On international sales: Transfer of both title and risk of loss shall occur upon entry into international waters, international airspace, or the crossing of an international border, with the sole exception of banked transactions (L/C, DAA, DAP) in which case the transfer of title occurs upon exchange of documents at the bank window, and the transfer of risk of loss occurs upon entry into international water, international airspace, or the crossing of an international border.

Marine Insurance: The party responsible for paying the main transportation shall provide full cargo insurance coverage – defined as door-to-door, ‘A’ cover, all risk, marine, war, strike and riot – regardless of the shipping terms, with the exception of CFR/CPT Incoterms, in which insurance is the buyer’s responsibility. Therefore, on E and F terms, plus CFR and CPT, the buyer shall provide full cargo insurance coverage, and on D terms, plus CIF and CIP, the seller shall provide full cargo insurance coverage.

For destinations and/or cargo on which governmental or insurance restrictions require additional approvals and/or premiums, or a split in coverage other than house-to-house, the responsible party/parties shall take such additional measures to ensure that the shipment is appropriately covered.

U.S. Export Controls: If intended for export, all goods and technology are exported in accordance with the Export Administration Regulations of the United States. Diversion contrary to U.S. law is prohibited.

I have read, understand, and fully agree to the terms and conditions as presented for all products purchased from Pentair Flow Technologies, LLC and Pentair Filtration Solutions LLC.

Authorized Signature:________________________________________

Printed Name: ______________________________________________

Company:__________________________________________________

Company Mailing Address:____________________________________

__________________________________________________________

Date:______________________________________________________

Documents

TANKS U.S. 2019 PRICE LIST...BAFFLE TANKS PARTS & ACCESSORIES 21664-40 BAF40 Conversion kit $130.00 21664-80 BAF80 Conversion kit 142.00 21664-120 BAF120 Conversion kit 153.00 21660