Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
page 27 page 29 page 30Inset drawer Roll-out tray Bottom mount
15 Subject to technical modifications without notice. © 2005
TANDEM 552H single extension drawer runners
Application Description Basic components
- Single extension concealed drawer runners - For 5/8" drawer material- Zinc coated steel profiles- Concealed roller carriage with permanently lubricated synthetic rollers- TANDEM smooth running mechanism- Locking devices for easy drawer insertion and removal- Force guided right side and ±1/16" tolerance compensating left side- Dynamic weight capacity of 75 lb- Static weight capacity of 100 lb
page 40Assembly aidspage 37Accessoriespage 14Drawer preparation
Other applications
Components
Profiles (right & left)
For overall cabinet depth
Drawer length
Extensionloss 5/8" drawer
305 (12") 229 (9") 37 (1-7/16") 552H2290N381 (15") 305 (12") 78 (3-1/16") 552H3050N457 (18") 381 (15") 98 (3-7/8") 552H3810N533 (21") 457 (18") 97 (3-13/16") 552H4570N610 (24") 533 (21") 118.5 (4-11/16") 552H5330N
Runner profile
Locking device
Rear mounting bracketfor face frame only
Rear mounting bracket
295.3750
- Two required per drawer- Use when rear mounting TANDEM runners in a face frame cabinet- Attach with at least three 612TH screws
Non-handed bracket
Standard locking device
T51.1700.04 LT51.1700.04 R
Narrow drawer locking device
T51.0700.20 LT51.0700.20 R
- One right and one left required per drawer- For drawers in 9" wide cabinets- Height adjustable- Attach with two 612TH screws
LeftRight
- One right and one left required per drawer- For standard drawer applications- Height adjustable- Attach with two 612TH screws
LeftRight
Dimensions in millimeters (inch equivalents as noted)
24 (31/32")
36 (1-7/16")
32 (1-1/4”)
33 (1-5/16”)
6 (1/4”)
14.4(9/16")
2032
(1-1
/4")
(13/
16")
1 (1/32")Drawer gap
Min. topclearance
6 (1/4")
Inside cabinet width
Outside drawer width
21 (13/16")
Ope
ning
13 (1/2”) Bottom recess
Max. drawer height = opening minus
20 (13/16”)Drawer side
thickness
33 (1-5/16”)Rear notch
14 (9/16”)Bottom clearance
Mountingscrewspage 37
37(1-7/16")
10 (3/8")
37 (1-7/16")
4 (5/32") Setback
Profile length
A
B
9 (11/32") typ.
Inside cabinet depth
Subject to technical modifications without notice. © 2005 16
Drawer and cabinet specifications
Dimensions - front view
Calculating outside drawer width
For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32")
Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32")
Profile close-up
Mounting locations
TANDEM Drawer lengthMax. inside
cabinet depth with bracket*
Min. insidecabinet depth Profile length A B
552H2290N 229 (9") 293 (11-9/16") 250 (9-7/8") 241 (9-1/2") 133 (5-1/2") 229 (9")
552H3050N 305 (12") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4")
552H3810N 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16")
552H4570N 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16")
552H5330N 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8")
Note: Rear mounting bracket only for frame applications
Rear mounting bracket
Drawer front gap
* Only applies to face frame applications where rear brackets are used.
Dimensions in millimeters (inch equivalents as noted)
Extension Single
Max. drawer material 5/8"
Dynamic capacity 75 lb.
Static capacity 100 lb.