System pro E energy PRIMO - El Sewedy

— System pro E energy PRIMOLow voltage distribution board for residential application

3 SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION

— PRIMO is a new range of distribution boards suitable for residential and commercial applications meeting latest market requirements.

SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION2

SYSTEM PRO E ENERGY PRIMO | TABLE OF CONTENTS

— Table of contents

Introduction

General characteristics

Technical properties

System description

Ordering details

Dimensions Details

04-04

05-05

06-06

07-10

11-15

16-17

3

SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION4

—Introduction

PRIMO boards are available in multi-row type, way type, and solution for metering. The range of row type is up to 4 rows – 48 modules, and up to 16 ways for the way type, in addition to 4 sizes for metering type.

5SYSTEM PRO E ENERGY PRIMO | GENERAL CHARACTERISTICS

—General characteristicsConstruction characteristics

The construction characteristics of the series guarantee practical installation and versatility.

Reversible DoorPRIMO system comes withreversible doors, the door can be hinged either to the left or right side depending upon the installer convenience.

Top and Bottom knockoutsThe system is designed providing 3 different sizes knockouts on both top and bottom.

Wide knockouts at both sidesThe system is providingaccessibility of cable on both sides via wide rectangle knockouts.

Delivered with N and PE barsPRIMO system is delivered with Neutral and Earth bars providing holes for each outgoing


—Technical properties

Standard IEC BS EN 61439 -1 &-3

Max. load 125 amps

Max. voltage 230 / 415 V ac, 50 / 60 Hz

Range Row type

No. of rows 1, 2, 3, and 4 rows

No. of modules 6, 10, 12, 24, 36 and 48 modules

Way type

No. of ways 4, 6, 8, 12, and 16 ways

Metering type

No. of meters 3Ph and 1Ph Conventional and Electronic meters

Degree of protection IP 41

Enclosure material Cold rolled sheet steel, Box and cover 1 mm

Enclosure finish Gray, RAL 7035

7SYSTEM PRO E ENERGY PRIMO | SYSTEM DESCRIPTION

—System descriptionWay type

Knockouts at both sides

Top and bottom knockouts

Depth adjustment facility Thin cover to provide leveling with installation wall

Neutral Terminal

Door can be hinged on the right or left side

Earth Terminal


—System descriptionVertical type

Knockouts at both sides

Door can be hinged on the right or left side

Thin cover to provide leveling with installation wall

Top and bottom knockouts

Depth adjustment facility

Neutral Terminal

Earth Terminal

Low Voltage Consumer Units& Distribution Boards

General

Consumer UnitsCombyHousemaster compact

Distribution BoardsProtecta compactProtecta compact accessoriesProtecta compact pan assembliesMini Center compactMounting kits for compact

Spare parts and general accessoriesDimensional details

Contents

1SKC802015C0205

2/3

45/6

7889

10/11

1213/16

1

Consumer Units& Distribution Boards

Reversible door

Quick and easy doorchange from left hand hingeto right hand hinging

2

Consumer Units & Distribution BoardsGeneral

1SKC802015C0205

Features

All ABB consumer units incorporate uniquedesign features making installation, modificationan easy operation and less time consuming.

The ABB range of sheet steel consumer units and distribution boards aredesigned for safety, reliability and availability in the electrical buildinginstallation.Complying to IEC 439 - 3, BS EN 60439 - 3

External earth stud

Quick & Easy

Removal or change of glandplates and fixing of top /bottom extention boxes isquick & easy

1 2 3

Easy handling for the user,all screws Pozidrive 2.

Type Test Certification

31SKC802015C0205

Consumer Units & Distribution BoardsGeneral

Robust spring loaded doorcatch with key lock

Terminals

Large 25 mm2 earth andneutral terminals deliveredin the open position.

Connection options

The TP&N distributionboards accept a variety ofincoming devices, isolator,miniature circuit breaker,residual current device,MCCB or direct cableconnection.The incoming devices areconnected to the busbar viavarious connection kits.

Front facia plate providesneat & attractive cover forall incomer options

Quick & easy electricalsolutions for variousinstallations.

4

1SKC 015 001 F0001

Consumer UnitsCombyOrdering details

For flush mounting

276276276276

Weightkg

No. ofrows

Ordering detailsType Code Type No.

xxxx

xxxx

ECT 107 FECT 110 FECT 116 FECT 120 F

1SKB 107 932 C00011SKB 110 932 C00011SKB 116 932 C00011SKB 120 932 C0001

88888888

2.32.83.54.3

1111

7101620

No. ofmodules

229283386460

For surface mounting

256256256256

Weightkg

DimensionsH x W x D mm

No. ofrows

No. ofmodules


xxxx

xxxx

ECT 107 SECT 110 SECT 116 SECT 120 S


209263366440

88888888

2.22.63.24.1

1111

7101620


Plastic flap

Steel flapFor surface mounting

256256256256

Weightkg

No. ofrows

No. ofmodules


xxxx

xxxx

ECS 107 DSECS 110 DSECS 116 DSECS 120 DS


209263366440

110110110110

2.83.44.44.8

1111

7101620


For flush mounting

276276276276

Weightkg

No. ofrows

No. ofmodules


xxxx

xxxx

ECS 107 DFECS 110 DFECS 116 DFECS 120 DF


229283386460

110110110110

2.93.64.75.0

1111

7101620


ApplicationComby consumer units are designedto suit installations in domestic andcommercial installations, easy toinstall, attractive and highly reliable.Fitted with either sheet steel flap orclear plastic flap for visualinspection of components.Complete with neutral and earthterminals and din rail.

Technical DataStandard : IEC 439-1&3, BS 60439-1&3Max. load : 100 ampsMax. voltage : 230 V ac, 50 HzRange : 7,10,16 and 20 modulesDegree of protection : IP 30Enclosure material : Cold rolled sheet steel

Box and cover 1 mm(Aluzinc steel on request)

Enclosure finish : Gray, RAL 7035

Comby Range

1SKC 015 002 F0001

1SKC 015 009 F0001

1SKC802015C0205

51SKC802015C0205

Isolator (E202/100A) IncomerWeightkg

No. ofways


xxxxx

xxxxx

HSMS 04CHSMS 07CHSMS 11CHSMS 16CHSMS 20C

1SKB 106 142 C40011SKB 109 142 C40011SKB 113 142 C40011SKB 118 142 C40011SKB 122 142 C4001

155210282368440

110110110110110

2.43.13.74.75.1

47111620

256256256256256


RCCB (F202AC/100/0.03A) Incomer, for HSRC 04C (F202AC/80/0.03A)Weightkg

No. ofways


xxxxx

xxxxx

HSRC 04CHSRC 07CHSRC 11CHSRC 16CHSRC 20C


155210282368440

110110110110110

2.53.23.84.85.2

47111620

256256256256256


ApplicationHousemaster consumer units aredesigned to suit installations in residentialcommercial and industrial installations,easy to install and highly reliable.Fitted with sheet steel flap for visualinspection of components.Complete with neutral and earth terminals.Unit comes complete with incomingdevices.Surface mounting only, (flush on request).

Technical DataStandard : IEC 439-1&3, BS 60439-1&3Max. load : 100 amps

80 amps for 4 way RCCBMax. voltage : 230 V ac, 50 HzRange : 4, 7, 11, 16 and 20 SP & N ways

Split load, 8, 12, 16 waysDegree of protection : IP 30Enclosure material : Cold rolled sheet steel


Enclosure finish : Gray, RAL 7035

Consumer UnitsHousemaster compactOrdering details

Housemaster sheet steel range

Split load (E202/100A+F202AC/80/0.03A) IncomerWeightkg

No. ofways


xxx

xxx

HSSL 4+4CHSSL 6+6CHSSL 8+8C

1SKB 113 142 C80011SKB 118 142 C80011SKB 122 142 C8001

282368440

110110110

4.15.15.5

4+46+68+8

256256256


Single pole pin type comb busbar

Weightkg

Max.current A

No. ofmodules

Ordering detailsType Code Type No.PNCB-05

PNCB-08

PNCB-12

PNCB-17

PNCB-21

PNCB-10PNCB-14PNCB-18PNCB-60

1SKB 034 702 P0005

1SKB 034 702 P0008

1SKB 034 702 P0012

1SKB 034 702 P0017

1SKB 034 702 P0021

1SKB 034 702 P00101SKB 034 702 P00141SKB 034 702 P00181SKB 034 702 P0060

ECS 104CHSMS/RC 04CECS 107CHSMS/RC 07CECS 111CHSMS/RC 011CECS 116CHSMS/RC 016CECS 120CHSMS/RC 020CHSSL 4+4CHSSL 6+6CHSSL 8+8C**

0.022

0.035

0.052

0.074

0.091

0.0430.0650.0820.260

100 5

8

12

17

21

10141860

30

C.S.Amm

Used for

** General as spare part (Original part)

Accessories

Max.load A80100100100100

1SKC 015 003 F0001

1SKC 015 004 F0001

61SKC802015C0205

Split load (E202/100A+F202AC/80/0.03A) IncomerWeightkg

No. ofways


xxx

xxx

HMSL 4+4CHMSL 6+6CHMSL 8+8C

1SPE 007 712 F03131SPE 007 712 F04131SPE 007 712 F0513

300370440

123123123

4.15.15.5

4+46+68+8

226226226


Isolator (E202/100A) IncomerWeightkg

No. ofways


xxxxx

xxxxx

HMMS 04CHMMS 06CHMMS 10CHMMS 14CHMMS 18C

1SPE 007 712 F01111SPE 007 712 F02111SPE 007 712 F03111SPE 007 712 F04111SPE 007 712 F0511

190230300370440

123123123123123

2.43.13.74.75.1

46101418

226226226226226


RCCB (F202AC/100/0.03A) Incomer, for HSRC 04C (F202AC/80/0.03A)Weightkg

No. ofways


xxxxx

xxxxx

HMRC 04CHMRC 06CHMRC 10CHMRC 14CHMRC 18C

1SPE 007 712 F01121SPE 007 712 F02121SPE 007 712 F03121SPE 007 712 F04121SPE 007 712 F0512

190230300370440

123123123123123

2.53.23.84.85.2

46101418

226226226226226


Housemaster plastic range

Consumer UnitsHousemaster compactOrdering details (continued)ApplicationHousemaster consumer units aredesigned to suit installations in residentialcommercial and industrial installations,easy to install and highly reliable.Unit comes complete with blanking plates,busbar, busbar cover, terminal bars andinstallation instructions.Surface mounting only.

Technical DataStandard : IEC 439-1 & BS 60439-1Max. load : 100 amps

80 amps for 4 way RCCBMax. voltage : 230 V ac, 50 HzRange : 4, 6, 10, 14 and 18 SP & N ways

Split load, 8, 12, 16 waysDegree of protection : IP 30Enclosure material : Moulded plasticEnclosure finish : White, RAL 9010

Max.load A80100100100100

1SKC 015 005 F0001

1SKC 015 006 F0001

1SKC 015 007 F0001

Distribution BoardsProtecta compactOrdering details

TP + N busbar type distribution boardsWeightkg

No. of TPways


46812162024

EPB25-304CEPB25-306CEPB25-308CEPB25-312CEPB25-316CEPB25-320CEPB25-324C

1SKP 804 142 C00511SKP 806 142 C00511SKP 808 142 C00511SKP 812 142 C00511SKP 816 142 C00511SKP 820 142 C00511SKP 824 142 C0051

50256061071883010011140

400400400400400400400

125125125125125125125

xxxxxxx

xxxxxxx

1213.214.216.320.224.326.4


Multi row type a distribution boards (distance between rows 150mm)Weightkg

No. ofrows


xxxxx

xxxxx

EPA 01EPA 02EPA 03EPA 04EPA 05

1SKP 116 142 C00011SKP 232 142 C00011SKP 348 142 C00011SKP 464 142 C00011SKP 580 142 C0001

400400400400400

2805026508001001

125125125125125

12345


1632486480

No. ofmodules

710.7131821

Technical Data

Standard : IEC 439- 3 & BS 60439 part 1 & 3Single row typeRange : 6, 9, 13, 18 and 22 ModulesMulti row typeMax. load : 100 ampsMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 16, 32, 48, 64 and 80 modules

1, 2, 3, 4 and 5 rowsBusbar typeMax. load : 250 ampsMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 4, 6, 8, 12, 16, 20 and 24 TP&N ways

12, 18, 24, 36, 48, 60 and 72 SP&N waysDegree of protection : IP 41, pan assemblies IP 20Enclosure material : Cold rolled sheet steel


Enclosure finish : Gray, RAL 7035Fault level : 35 kA

Application

Protecta compact distribution boards,a design aimed for safety, reliabilityand availability in the electrical buildinginstallation.Available in busbar and multi rowtypes.Surface mounting only, (flush onrequest).Supplied without incoming device oroutgoing protection device.

Single row type are deliveredcomplete with neutral and earthterminals, comb busbar and busbarneutral connection.

TP + N busbar distribution boards with DIN rail for 8 modules (MX version)*Weightkg

No. of TPways


46812

EPB 304 MXCEPB 306 MXCEPB 308 MXCEPB 312 MXC

1SKP 804 142 C10011SKP 806 142 C10011SKP 808 142 C10011SKP 812 142 C1001

502560610718

400400400400

125125125125

xxxx

xxxx

11.8131416


Single row type a distribution boards

71SKC802015C0205

* Connection kit EPB KIT7C is proposed for connection of incoming devices to the main busbars.

256256256256256

Weightkg

No. ofways


xxxxx

xxxxx

ECS 104CECS 107CECS 111CECS 116CECS 120C


155210282368440

110110110110110

2.12.83.44.44.8

47111620


69131822

No. ofmodules

1SKC 015 008 F0001

1SKC 015 009 F0001

1SKC 015 010 F0001

1SKC 015 011 F0001

1SKC 015 012 F0001

81SKC802015C0205

Distribution BoardsProtecta compact accessories / TP + N pan assembliesOrdering details

Top extension boxes (16 Modules)Type Weight

kgOrdering details

Type Code Type No.463.5

Sheet steel flap / 1RowSheet steel flap / 2RowPlastic flap

EPB TEB 200SEPB TEB 400SEPB TEB 200P

1SKA 122 142 C00011SKA 124 142 C00011SKA 125 142 C0001

200400200

400400400

125125125

xxx

xxx


Top / bottom extension boxesType Weight

kgOrdering details

Type Code Type No.3.56

Plain coverPlain cover

EPB TEB 200CEPB TEB 400C

1SKA 121 142 C00011SKA 123 142 C0001

200400

400400

125125

xx

xx


No. ofmodules

5025606107188301001

12.513.515.5182023

323248646480

223445

No. ofrows

Weightkg


400400400400400400

125125125125125125

xxxxxx

xxxxxx

1SKA 102 142 C00011SKA 112 142 C00011SKA 103 142 C00011SKA 104 142 C00011SKA 114 142 C00011SKA 105 142 C0001

EPB SEB2R04WEPB SEB2R06WEPB SEB3R08WEPB SEB4R12WEPB SEB4R16WEPB SEB5R20W


Side extension boxes (distance between rows 150mm)

4 way6 way8 way12 way16 way20 way

Sided withTP+N DB’s

Weightkg

No. ofways


xxxxxxx

xxxxxxx

EPB 304 PAC-16EPB 306 PAC-16EPB 308 PAC-16EPB 312 PAC-16EPB 316 PAC-16EPB 320 PAC-16EPB 324 PAC-16


270270270270270270270

3754294835916998741014

60606060606060

3.13.74.35.26.78.29.4

46812162024


TP + N pan assemblies, complete with busbars + earth / neutral bars. (range 160 A)

Weightkg0.30.30.2

Accessories for distribution boards

Flange plate blankFlange plate with knock-outsCylinder lock with keys

No. Ordering detailsType Code Type No.EPB GP1EPB GP2EPB CL A1-G

1SKA 130 002 C00011SKA 131 002 C00011SKA 132 002 C1001

123

Accessory type

TP + N pan assemblies

Weightkg

No. ofways


xxxxxxx

xxxxxxx

EPB25-PA304CEPB25-PA306CEPB25-PA308CEPB25-PA312CEPB25-PA316CEPB25-PA320CEPB25-PA324C


270270270270270270270

3754294835916998741014

60606060606060

3.13.74.35.26.78.29.4

46812162024


TP + N pan assemblies, complete with busbars + earth / neutral bars. (range 250 A)

1SKC 015 013 F0001

1SKC 015 014 F0001

1SKC 015 015 F0001

1SKC 015 016 F0001

1SKC 015 017 F0001

1SKC 015 018 F0001

91SKC802015C0205

Distribution BoardsMini Center compactOrdering details

Mini Center accessories

TP + N busbar type distribution boards

Multi row type a distribution boards (distance between rows 150mm)

Top / Bottom extension boxesfor flush mounting

Weightkg

No. of TPways


xxxxx

xxxxx

4681216

540600650758870

420420420420420

132132132132132

11.713.114.116.120.1

EMC 312 CF-16EMC 318 CF-16EMC 324 CF-16EMC 336 CF-16EMC 348 CF-16

1SKM 804 242 C01111SKM 806 242 C01111SKM 808 242 C01111SKM 812 242 C01111SKM 816 242 C0111


320540690840990

2032486480

12345

132132132132132

Weightkg

No. ofrows

No. ofmodules


xxxxx

xxxxx

420420420420420

610.6131720

EMC 120 RXFEMC 232 RXFEMC 348 RXFEMC 464 RXFEMC 580 RXF

1SKM 120 242 C00011SKM 232 242 C00011SKM 348 242 C00011SKM 464 242 C00011SKM 580 242 C0001


Plain coverPlain cover

154154

Weightkg

Type Ordering detailsType Code Type No.

xx

xx

420420

220420

EMC 200 EXB FEMC 400 EXB F

1SKA 252 242 C00011SKA 253 242 C0001


4.56.5

Top extension boxesType Weight

kgOrdering details

Type Code Type No.4.56.5

Sheet steel flap / 1RowSheet steel flap / 2Row

EMC 200S EXB FEMC 400S EXB F

1SKA 254 242 C00011SKA 255 242 C0001

220420

420420

154154

xx

xx


Technical Data

Standard : IEC 439- 3 & BS 60439 part 1 & 3

Multi row typeMax. load : 100 ampsMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 20, 32, 48, 64 and 80 modules

1, 2, 3, 4 and 5 rowsBusbar typeMax. load : 160 amps

Available in 250 amps on requestMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 4, 6, 8, 12 and 16 TP&N ways

12, 18, 24, 36 and 48 SP&N waysDegree of protection : IP 41, pan assemblies IP 20Enclosure material : Cold rolled sheet steel


Enclosure finish : Gray, RAL 7035Fault level : 35 kA

Application

Mini Center compact distributionboards, a design aimed for safety,reliability and availability in theelectrical building installation.Available in busbar and multi rowtypes.Flush mounting only, (surface onrequest).Supplied without incoming device oroutgoing protection device.

1SKC 015 019 F0001

1SKC 015 020 F0001

1SKC 015 021 F0001

101SKC802015C0205

Distribution boardsMounting kits for compactOrdering details

The TP + N busbar type distribution boards are delivered as standard without incomingkits or incoming devices these need to be ordered separately.

RCCB Incoming kitKit contains:

� Terminal shroud.� Cover plate.� DIN Rail mounting bracket for incoming device.� Neutral wire link (flexible blue 16 mm2)� Kit parts list.� Instruction leaflet.

Kit No. Ordering detailsType Code Type No.EPB KIT 2C 1SKA 142 000 C10012

Incoming Device

4 pole RCCB F 200 series

Weightkg0.12

Kit contains:� Covers for unused connection busbar points (1 Strip For 4, 6 ways - 2 Strip For 8, 12 ways - 3 Strip

For 16, 20 ways - 4 Strip For 24 ways)� Labels for outgoing circuits on door and trim cover (L1,L2,L3) to suit the board configuration.� Two keys for door lock. � Kit parts list.� Instruction leaflet.

Standard kits (Included with the distribution boards but can also be ordered separately as spares)

Kit No. Ordering detailsType Code Type No.EPB KIT 0-1CEPB KIT 0-2CEPB KIT 0-3CEPB KIT 0-4CEPB KIT 0-5CEPB KIT 0-6CEPB KIT 0-7C

1SKA 140 000 C10021SKA 140 000 C10031SKA 140 000 C10041SKA 140 000 C10051SKA 140 000 C10061SKA 140 000 C10071SKA 140 000 C1008

0

Incoming Device

3 pole isolator or MCB

Weightkg

No. ofways46812162024

0.040.040.040.040.040.040.05

Kit contains:� Coloured flexible cables and comb busbar to connect incoming devices to main Busbars.� Terminals shroud.� Kit parts list.� Instruction leaflet.

Connection kit For TP+N distribution board with DIN Rail (MX version)


Weightkg0.47

For connection of 4 pole isolator to 4 pole RCCB and RCCB to the main busbar terminals and neutral bar

Isolator Incoming kitKit contains:

� Terminal shroud.� Cover plate with 3 module opening.� DIN Rail mounting bracket for incoming device.� Kit parts list.� Instruction leaflet.


Incoming Device

3 pole isolator or MCB

Weightkg0.12

1SKC 015 022 F0001

1SKC 015 023 F0001

1SKC 015 024 F0001

1SKC 015 025 F0001

111SKC802015C0205

Distribution boardsMounting kits for compactOrdering details (continued)

Kit contains:� Copper connector piece complete with fixing screws and washers.� Terminal shroud.� Cover plate.� DIN Rail mounting bracket for incoming device.� Neutral wire link (flexible blue 16 mm2).� Kit parts list.� Instruction leaflet.

Single phase conversion kit

Kit No. Ordering detailsType Code Type No.EPB KIT 6C1 1SKA 146 000 C30016

Weightkg0.16

Direct cable connection kit (120 mm)Kit contains:

� Copper connector pieces for L1, L2, L3 complete with fixing screws, washers and support.� Two terminal shrouds.� Cover plate.� Kit parts list.� Instruction leaflet.


Incoming Device

120 mm direct

Weightkg0.45

Used to mount two Protecta distribution boards, side by side or Protecta distribution board with side extensionbox. One kit is used for all distribution board configurations.Kit contains:

� 3 rubber gaskets.� 6 joining bolts 5x20 mm complete with fixing washers� Kit parts list.� Instruction leaflet.

Kit No. Ordering detailsType Code Type No.EPB KIT 5 1SKA 145 000 C00015

Weightkg0.06

Joining kit

MCCB Incoming kitKit contains: � Copper connector pieces for L1, L2, L3 complete with fixing screws and washers

� Terminal shroud.� Cover plate with opening for T1 or T3.� Kit parts list.� Instruction leaflet.

Weightkg

Kit No. Ordering detailsType Code Type No.EPB KIT 1-T1C1EPB KIT 1-T3C1

1SKA 141 000 C30011SKA 141 000 C3003

1

Incoming Device

T max T1T max T3

0.30.4

Direct cable connection kit (70 mm)Kit contains:

� Copper connector pieces for L1, L2, L3 complete with fixing screws, washers and support.� 2x Terminal shroud.� Cover plate.� Kit parts list.� Instruction leaflet.


Incoming Device

70 mm direct

Weightkg0.2

1SKC 015 026 F0001

1SKC 015 027 F0001

1SKC 015 028 F0001

1SKC 015 029 F0001

1SKC 015 030 F0001

121SKC802015C0205

Distribution boardsSpare parts and general accessoriesOrdering details

Kit contains:� 1 Terminal bar.� 1 Copper cable connector complete with screw and washers.� 2 Yellow numbering labels for PE terminal bars.� 1 Work instruction.

Earth terminal bar kit complete

Description Ordering detailsType Code Type No.PETB - 04 WPETB - 06 WPETB - 08 WPETB - 12 WPETB - 16 WPETB - 20 WPETB - 24 W

1SKP 011 914 R00011SKP 011 914 R00021SKP 011 914 R00031SKP 011 914 R00041SKP 011 914 R00051SKP 011 914 R00061SKP 011 914 R0007

PE-bar 9 holes complete with screws 4 wayPE-bar 13 holes complete with screws 6 wayPE-bar 17 holes complete with screws 8 wayPE-bar 21 holes complete with screws 12 wayPE-bar 13&17 holes complete with screws 16 wayPE-bar 17&21 holes complete with screws 20 wayPE-bar 21&21 holes complete with screws 24 way

Weightkg0.080.10.120.140.190.230.25

Kit contains:� 1 Terminal bar.� 2 Terminal bar carrier (support).� 1 Kit shield cover. � 1 Warning label-small size.� 1 Copper cable connector complete with screw and washers.� 2 White numbering labels for N terminal bars.� 1 Work instruction.

Neutral terminal bar kit complete

Description Ordering detailsType Code Type No.NTB - 04 WNTB - 06 WNTB - 08 WNTB - 12 WNTB - 16 WNTB - 20 WNTB - 24 W

1SKP 011 911 R00011SKP 011 911 R00021SKP 011 911 R00031SKP 011 911 R00041SKP 011 911 R00051SKP 011 911 R00061SKP 011 911 R0007

N-bar 9 holes complete with screws & shield cover 4 wayN-bar 13 holes complete with screws & shield cover 6 wayN-bar 17 holes complete with screws & shield cover 8 wayN-bar 21 holes complete with screws & shield cover 12 wayN-bar 13&17 holes complete with screws & shield cover 16 wayN-bar 17&21 holes complete with screws & shield cover 20 wayN-bar 21&21 holes complete with screws & shield cover 24 way

Weightkg0.120.140.160.180.280.320.34

Spare parts and general accessoriesOrdering details

Type Code Type No.SZ-BP12

SZ-BSK1

NPE-CT

MTSH-C

PEFC-C

GJF1 101 902 R0008

2CDL 200 001 R0011

1SKB 014 701 P0001

1SKA 136 000 C0001

1SKA 137 000 C0001

Weightkg

Description

Blanking plates used to cover unused MCB waysin the consumer units and distribution boards frontcover supplied in a strip of 12 modules.

Busbar terminal cover used to cover unusedoutgoing busbar terminals supplied in a strip of 5pieces.

Copper connection terminal for connecting incomingcable to neutral or earth terminal bars.

Terminal shroud

Front facia cover

0.05

0.003

0.03

0.10

1SKC 015 031 F0001

1SKC 015 032 F0001

1SKC 015 033 F0001

1SKC 015 034 F0001

1SKC 015 035 F0001

1SKC 015 036 F0001

1SKC 015 037 F0001

131SKC802015C0205

Consumer UnitsDimensional details

Comby plastic flap consumer unit flush mounted

250

276

142

C

276

A (mm)No. ofModules

Type Code B (mm)

7101620

203257262434

ECT 107 FECT 110 FECT 116 FECT 120 F

229283386460

C (mm)

133187292366

Comby plastic flap consumer unit surface mounted

250

256

C

142256

26 A (mm)No. ofModules

Type Code B (mm)

ECT 107 SECT 110 SECT 116 SECT 120 S

7101620

209263366440

203257262434

C (mm)

133187292366

Comby steel flap consumer unit surface mounted

250

256

256 142

110

C

A (mm)No. ofModules

Type Code B (mm)

203257262434

ECS 107 DSECS 110 DSECS 116 DSECS 120 DS

7101620

209263366440

C (mm)

133187292366

141SKC802015C0205

Consumer UnitsDimensional details (continued)

Housemaster compact sheet steal consumer unit surface mounted

256

256

110

88

110

C

142

A (mm)No. ofModules

Type Code B (mm)

6

9

13

18

22

155

210

263

368

440

HSMS 04CHSRC 04CHSMS 07CHSRC 07CHSMS 11CHSRC 11CHSSL 4+4CHSMS 16CHSRC 16CHSSL 6+6CHSMS 20CHSRC 20CHSSL 8+8C

152

207

257

365

437

C (mm)

77

133

187

292

360

Comby steel flap consumer unit flush mounted

A (mm)No. ofModules

Type Code B (mm)

203257262434

ECS 107 DFECS 110 DFECS 116 DFECS 120 DF

7101620

229283386460

C (mm)

133187292366

256 142

110

C

250

276

Housemaster compact plastic consumer unit surface mounted

A (mm)No. ofModules

Type Code B (mm)

6

9

13

18

22

100

140

210

280

350

HMMS 04CHMRC 04CHMMS 07CHMRC 07CHMMS 11CHMRC 11CHMSL 4+4CHMMS 16CHMRC 16CHMSL 6+6CHMMS 20CHMRC 20CHMSL 8+8C

190

230

300

370

440

A

B

123

122226

Protecta multi row distribution boards

125

400

294

1632486480

2805026508001000

A (mm)No. ofWays

Type Code B (mm)

EPA 01EPA 02EPA 03EPA 04EPA 05

94332438546829

Distribution BoardsDimensional details (continued)

151SKC802015C0205

Protecta compact single row distribution boards surface mounted

256

256

110

88

110

C

142

A (mm)No. of O/GModules

Type Code B (mm)

152207257365437

ECS 104CECS 107CECS 111CECS 116CECS 120C

47111620

155210263368440

C (mm)

77133187292360

Protecta compact busbar type distribution boards

125

400

294

332

386

438

546

654829969

4

6

8

12

162024

502

560

610

718

83010001140

A (mm)No. ofWays

Type Code B (mm)

EPB25-304CEPB 304 MXCEPB25-306CEPB 306 MXCEPB25-308CEPB 308 MXCEPB25-312CEPB 312 MXCEPB25-316CEPB25-320CEPB25-324C

Distribution BoardsDimensional details (continued)

Depth 60 mm.

161SKC802015C0205

A (mm)No. ofways

Type Code B (mm) C (mm)

4681216

540600650758870

EMC 312 CF-16EMC 318 CF-16EMC 324 CF-16EMC 336 CF-16EMC 348 CF-16

316372426534642

498558608716828

A (mm)No. ofModules

Type Code B (mm)

320540690840990

2032486480

EMC 120 RXFEMC 232 RXFEMC 348 RXFEMC 464 RXFEMC 580 RXF

278496646750918

C (mm)

94312462566736

Protecta compact pan assemblies

235

B

252

270

Minicenter busbar type distribution boards

Minicenter multi row distribution boards

A (mm)Type Code

EPB 304 PAC-16EPB25-PA304CEPB 306 PAC-16EPB25-PA306CEPB 308 PAC-16EPB25-PA308CEPB 312 PAC-16EPB25-PA312CEPB 316 PAC-16EPB25-PA316CEPB 320 PAC-16EPB25-PA320CEPB 324 PAC-16EPB25-PA324C

No. ofWays4

6

8

12

16

20

24

375

429

483

591

699

875

1014

B (mm)

202

256

310

418

526

701

841

132

C

400

420

132

A

420

B

294

25 20

43

420

132

400294

Contact us

ABB7 Dr. Mohamed Kamel Hussein St.,El Nozha El Gedeida, Heliopolis. Cairo, Egypt.Tel.: + 202 2622 4660Sales Tel.: + 202 2625 1448 - 2625 1446Fax: + 202 2622 [email protected]

www.abb.com/mea/lowvoltage

As part of its on-going product improvement, ABB reservesthe right to modify the characteristics or the productsdescribed in this document. The information given is not-contractual. For further details please contact the ABBcompany marketing these products in your country.

No:

1SK

C80

2015

C02

05 -

Prin

ted

in E

gypt

(Mar

. 200

9) -

ein

adv

ertis

ing

desi

gns

IS2 enclosures by ABB are the perfect platform for protection, mounting and installation of your industrial control panel component needs. The features and benefits of the IS2 allow for easy installation and design:

− Modular panel and component design − Readily available 3D drawings for ease

of design − Flexible options to suit a variety

of applications

Technical characteristics − Industry standard dimensions − NEMA 12 enclosure − Floor mounted − UL 50 certified − Suitable for UL 508A applications − Color: Grey RAL7035 − Standard components provided with

grounding connections

Standard dimensionsHeight: 1800, 2000 (mm)Width: 600, 800, 1000, 1200 (mm)Depth: 500, 600, 800 (mm)

Note: Standard dimensions are available from stock. Additional dimensional sizes available from factory upon request.

User installed accessories − Standard and oversized mounting back

plates with front or lateral insertion − Cable entry flanges − Mounting crosspieces − 19-inch rack frames − Lifting eyebolts and reinforcements − Key lock inserts − Fans, filters, and grates for ventilation

IS2 Automation Enclosures Catalog selection guide

Electrification Products

Note:1 1200 (mm) wide is not available in 1000 (mm) depth.2 Only available for front/rear blind panel.

All factory assembled enclosures include: uprights/frame, base/top, plinths and plinth covers and lifing eyes.

Factory assembled catalog number breakdown

I S X X X X X X

Height Width Depth Front Door Front Door Width Rear Door Rear Door Width Right Side Left Side Cable Entry

X —NoneF —FixedS —Sliding

X —NoneF —Blind side panel A —Blind door (right hinge)L —Blind door (left hinge)

2 —200 (mm)4 —400 (mm) 5 —500 (mm)6 —600 (mm)8 —800 (mm)1 —1000 (mm)A —1200 (mm)2

1 —1800 (mm)2 —2000 (mm) A —2200 (mm)

4 —400 (mm)6 —600 (mm)8 —800 (mm)1 —1000 (mm)A —1200 (mm)1

4 —400 (mm)5 —500 (mm)6 —600 (mm)8 —800 (mm)1 —1000 (mm)

X —NoneF —Blind panelA —Blind door (right hinge)B —Transparent (right hinge)C —Aerated (right hinge)D —Double w/ overlapping closure (right hinge)Q—Double door w/ handlesL —Blind door (left hinge)M—Transparent (left hinge)N —Aerated (left hinge)P —Double w/ overlapping closure (left hinge)

Accessories must be ordered separately and are available from the U.S. distribution center. This allows for quick delivery and easier component installation.

Factory assembled optionsUser installed accessories

Standard Mounting Back Plates

H (mm) W (mm) Ordering Code

1800

600 EA1860

800 EA1880

1000 EA1810

1200 EA1812

2000

600 EA2060

800 EA2080

1000 EA2010

1200 EA2013

Fixed 19" Rack Frame and Brackets

Mounting Frames


1800 800 EG1805

2000 800 EG2005

Required Mounting Brackets D (mm) Ordering Code

Top Bracket - 2 pcs 600 EB6104

Top Bracket - 2 pcs 800 EB8104

Center/Bottom Bracket - 2 pcs 600 EB6106

Center/Bottom Bracket - 2 pcs 800 EB8106

Ventilation Kits


Grill, Fan and Filter 115V Power Supply Required

250 250 EN2204K

Grill, Fan and Filter 230V Power Supply Required

204 204 EN1204K

Blind Door

Blind Panel

Sliding CableEntry Plates

Double DoorOverlapping Closure

Doors/Panels and Bottom Cable Entry

800 (mm)

For a complete list of options and accessories, please contact your local sales representative.

User Installed Accessory Code:


2000 800 EA2080

6

Ordering Example:

Factory Assembled Code:

I S 2 8 8 P 4 F 8 F F S X X X X X X

1 2 3 4 5

1 2 3 4 5

2000(mm)

800 (mm)

800 (mm)

400 (mm)

6

Ordering Code(s):

=IS288P4F8FFSXXXXXX+

EA2080*

*Back plate shipped loose

1SX

U15

0187

L020

1, A

pril

2016

Contact us ABBElectrification Products8155 T&B BoulevardMemphis, TN 38125www.abb.com/lowvoltage

USA Technical Support: 888-385-1221Customer Service: 888-862-32907:00 a.m. to 5:30 p.m., CST, Monday – [email protected]

—ABB Electrical Industries (ABB Arab) S.A.E. P.O. Box 11771 CairoEgypt

abb.com/ System pro E control SR Basic

© Copyright 2017 ABB. All rights reserved. Specifications subject to change without notice. 1SKC802016C2016

— System pro E control SR BasicLow voltage small and medium-sized enclosures for automation and distribution

— SR Basic is the latest range of multipurpose enclosures suitable for industrial and commercial applications, with high degree of protection in accordance with standard.

SyStEm pRo E contRol SR BASIc | LOw vOLtAge SmALL And medium-Sized enCLOSureS

— table of contents

SyStEm pRo E contRol SR BASIc | tABLe Of COntentS

Introduction

General characteristics

technical details

System description

ordering details

Dimensions details

05-05

06-06

06-06

07-07

08-10

11-13

5 SyStEm pRo E contRol SR BASIc | LOw vOLtAge SmALL And medium-Sized enCLOSureS

—Introduction

the Sr Basic enclosures can be also installed in secondary distribution switchboards

thanks to the possibility of installing the whole range of apparatus and modular

circuit-breakers on din rails, thereby allowing construction of electrical switchgears,

in widths from 200 to 800 mm, heights from 300 to 1600 mm, and depths from 150

to 400 mm.

A single line of metalwork structures therefore allows construction of automation

and, secondary and end distribution electrical switchboards thanks to the mounting

plate and the optional stacking of enclosures.

Sr Basic extensive range of enclosures is perfect for meeting all the current

requirements of electrical installations, in residential, tertiary and industrial sectors.

with their high specification the System pro e Sr Basic enclosures are the perfect fit

for the demanding requirements of railways and infrastructure.

in electrical installations such as banks, hospitals and airports where service

continuity is critical, an enclosure system allows the switchgear to connect and

disconnect voltages in a totally safe manner, which is required.

6SyStEm pRo E contRol SR BASIc | generAL ChArACteriStiCS

—General characteristics

construction characteristics

the construction characteristics of the series guarantee practical

installation and versatility, as well as highly technical features, such as

the iP65 degree of protection. the apparatus can be installed on a

blind back plate.

Range

the range is divided into 43 different dimensions: from h=300mm to

1800mm, w=200mm to 1200mm and d=150mm to 400mm.

the enclosures can be installed either on the wall, or on the floor.

locking systemDifferent closing systems can be installed as per site requirement

Hinge systemHinges are made of aluminummaterial in order to resistcorrosion

provision for door earthingDoor earthing is assured by twoearth studs fixed on the top andbottom corners of the door

technical detailsconformity with standard IEC 62208

Degree of protection iP 65 (ieC 60529)

Degree of mechanical strength iK 10 (ieC 62262)

Fixing method floor standing / wall mounting

color rAL 7035

type of material 15/10 Sheet Steel for enclosure

20/10 galvanized mounting plate

7 SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures

—System description

Wide mounting plate Door can be hinged on the right or left side

Removable gland plates asstandard supplied on the topand the bottom .

Internal polyurethane foam gasket, laid using a continuous casting process

8SyStEm pRo E contRol SR BASIc | Ordering detAiLS

—ordering details

Empty enclosure with single plain door with mounting plate

300 200 150 SrB0302015 1SKe302015C0001300 300 150 SrB0303015 1SKe303015C0001400 300 150 SrB0403015 1SKe403015C0001400 300 200 SrB0403020 1SKe403020C0001500 400 150 SrB0504015 1SKe504015C0001500 400 200 SrB0504020 1SKe504020C0001600 400 150 SrB0604015 1SKe604015C0001600 400 200 SrB0604020 1SKe604020C0001600 400 250 SrB0604025 1SKe604025C0001600 600 250 SrB0606025 1SKe606025C0001700 500 200 SrB0705020 1SKe705020C0001700 500 250 SrB0705025 1SKe705025C0001800 600 200 SrB0806020 1SKe806020C0001800 600 250 SrB0806025 1SKe806025C0001800 600 300 SrB0806030 1SKe806030C0001800 800 300 SrB0808030 1SKe808030C00011000 600 200 SrB1006020 1SKe106020C00011000 600 250 SrB1006025 1SKe106025C00011000 600 300 SrB1006030 1SKe106030C00011000 800 200 SrB1008020 1SKe108020C00011000 800 250 SrB1008025 1SKe108025C00011000 800 300 SrB1008030 1SKe108030C0001

Dimensions

HHeight Width Depth

W D

ordering details

type code ordering code


Empty enclosure with single plain door with mounting plate

1200 600 250 SrB1206025 1SKe126025C00011200 600 300 SrB1206030 1SKe126030C00011200 800 250 SrB1208025 1SKe128025C00011200 800 300 SrB1208030 1SKe128030C00011400 800 300 SrB1408030 1SKe148030C00011400 800 400 SrB1408040 1SKe148040C00011600 800 300 SrB1608030 1SKe168030C00011600 800 400 SrB1608040 1SKe168040C00011800 800 300 SrB1808030 1SKe188030C00011800 800 400 SrB1808040 1SKe188040C0001

Dimensions

HHeight Width Depth

W D

ordering details


—ordering details

10

—ordering details

Empty enclosure with double plain door with mounting plate

1000 1000 300 SrB10010030 1SKe101030C00011200 1000 300 SrB12010030 1SKe121030C00011200 1000 400 SrB12010040 1SKe121040C00011400 1000 300 SrB14010030 1SKe141030C00011400 1000 400 SrB14010040 1SKe141040C00011600 1000 300 SrB16010030 1SKe161030C00011600 1000 400 SrB16010040 1SKe161040C00011800 1000 300 SrB18010030 1SKe181030C00011800 1000 400 SrB18010040 1SKe181040C00011800 1200 300 SrB18012030 1SKe181230C00011800 1200 400 SrB18012040 1SKe181240C0001

Dimensions

HHeight Width Depth

W D

ordering details


SyStEm pRo E contRol SR BASIc | Ordering detAiLS


—Dimensions Details

type code

SrB0302015300 200 150 130 230 120 43 148 225

SrB0303015 300 150 230 230 220 43 245 225SrB0403015

400 300 150 230 330 220 43 248 325SrB0403020 200 230 330 220 93 248 325SrB0504015

500 400 150 330 430 320 43 348 425SrB0504020 200 330 430 320 93 348 425SrB0604015

600 400150 -70 530 -80 43 -52 525

SrB0604020 200 -70 530 -80 93 -52 525SrB0604025 250 -70 530 -80 143 -52 525SrB0606025 600 250 530 530 520 143 545 525SrB0705020

700 500 200 430 630 420 93 448 625SrB0705025 250 430 630 420 143 448 625SrB0806020

800600

200 530 730 520 93 548 725SrB0806025 250 530 730 520 143 548 725SrB0806030 300 530 730 520 193 548 725SrB0808030 800 300 730 730 720 193 745 725SrB1006020

1000

600200 530 930 520 93 548 925

SrB1006025 250 530 930 520 143 548 925SrB1006030 300 530 930 520 193 548 925SrB1008020

800200 530 930 720 93 745 925

SrB1008025 250 530 930 720 143 745 925SrB1008030 300 530 930 720 193 745 925

Dimensions

HHeight Width Depth

M2(mm)M1(mm) G1(mm) G2(mm) P1(mm) P2(mm)W D

12


SrB1206025

1200

600 250 432 96 524 1144SrB1206030 300 432 193 524 1144SrB1208025

800 250 720 143 745 1144SrB1208030 300 720 193 745 1144SrB1408030

1400 800 300 720 193 745 1345SrB1408040 400 720 293 745 1345SrB1608030

1600 800 300 720 193 745 1545SrB1608040 400 720 293 745 1545SrB1808030

1800 800 300 720 193 745 1745SrB1808040 400 720 293 745 1745

type code

Dimensions

H (mm)Height Width Depth

W (mm) D (mm) G1 (mm) G2 (mm) P1 (mm) P2 (mm)

SyStEm pRo E contRol SR BASIc | dimenSiOnS detAiLS



SrB10010030 1000 1000 300 920 193 945 945SrB12010030

1200 1000300 920 193 945 1145

SrB12010040 400 920 293 -55 1145SrB14010030

1400 1000300 920 193 945 1345

SrB14010040 400 920 293 -55 1345SrB16010030

1600 1000300 920 193 945 1545

SrB16010040 400 920 293 -55 1545SrB18010030

18001000

300 920 193 945 1745SrB18010040 400 920 293 -55 1745SrB18012030

1200300 1120 193 1145 1745

SrB18012040 400 1120 293 -55 1745

type code

Dimensions

H (mm)Height Width Depth

W (mm) D (mm) G1 (mm) G2 (mm) P1 (mm) P2 (mm)

14SyStEm pRo E contRol SR BASIc | fOr yOur nOteS


16SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures

Additional informationwe reserve the right to make technical changes or modify the contents of this document without prior notice. with regard to purchase orders, the agreed particulars shall prevail. ABB Ag does not accept any responsibility whatso-ever for potential errors or possible lack of information in this document.

we reserve all rights in this document and in the subject matter and illustra-tions contained therein. Any reproduc-tion, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB Ag.

Distribution EnclosuresUNIKIT

General

Technical details

Ordering detailsUnikit 150 / 250AccessoriesSpare Parts

Order exampleComplete enclosed solutions

Contents

1SKC802020C0202

2

3

3/45/7

8

910/12

1

Distribution EnclosuresUNIKIT

2

Distribution EnclosuresUNIKITGeneral

1SKC802020C0202

Easy to transport & fast to assemble

UNIKIT, the innovative enclosure system offers maximum safety,functionality, flexibility, quick and simple assembly.

UNIKIT is an extendable system where standardised components can beassembled quickly and cost-effectively into a complete individual panel.

A unique quick-fasten element lies at the heart of the quick assemblysystem. It connects the individual enclosure sections to one another firmlyand securely by a simple turning action. No more drilling, no more screwingand bolting! Assembly time is reduced. This quick-fastener elementguarentees the grounding of the enclosure after assembly. Its specialconstruction makes it completely resistant to vibration.

Flat pack versions offer additional benefits:

• A clear and logically structured packaging system• Low freight costs due to reduced transportation volume• Quick and simple assembly• Easily understandable assembly instructions• Minimal packaging material• Outstanding material and workmanship quality

UNIKIT convenienceFor your convenience UNIKIT is offered in two variations: completelyassembled cabinets or as a flat pack kit for customer assembly.

• Pleasing appearance with attractive details• No visible mounting or connection elements• Enclosure covers and bottoms are pre-punched• A multitude of usable modules: e.g. EIB modules

Whether used for in-house installations or industrial applications, the extremely welldesigned UNIKIT system offers a host of decisive advantage:

31SKC802020C0202

Distribution Enclosures - UNIKITSub-sub distribution - Complete built up empty enclosuresTechnical details- Ordering details

Technical Details:

Standard (Regulations) : IEC 439-1/EN 60439-1/BS EN 60439-1&3Max. load

Wall mounted (UNIKIT 150) : 250 AFree standing (UNIKIT 250) : 630 A

Max. voltage : 400V ac, 50/60 HzRated insulation voltage Ui : 1000 V ACRated operational voltage Ue : 690 V AC

Degree of protection : IP 30 without Door IP 41 with Door IP 54 on request

Colour : RAL 7035 (1013 available on request) Rated short time withstand current: 35 KA

Enclosure material : Cold rolled sheet steel 1.5 mm (Aluzinc steel on request)

UNIKIT 150 In = 250 A

Plain doorType Weight

kgOrdering details

Type Code Type No.3239

Wall mounted size 1Wall mounted size 2

GDUN150-01GDUN150-02

1SKU 124 152 C00011SKU 224 152 C0001

7001000

700700

150150

xx

xx


Transparent doorType Weight

kgOrdering details



GDUN150-01TGDUN150-02T

1SKU 124 152 C00111SKU 224 152 C0011

7001000

700700

150150

xx

xx


UNIKIT 250 In = 630 APlain doorType Weight

kgOrdering details


Free standing size 3Free standing size 4Free standing size 5Free standing size 6

GDUN250-03GDUN250-04GDUN250-05GDUN250-06

1SKU 302 152 C00011SKU 404 152 C00011SKU 508 152 C00011SKU 612 152 C0001

700100013001900

700700700700

300300300300

xxxx

xxxx



kgOrdering details



GDUN250-03TGDUN250-04TGDUN250-05TGDUN250-06T


700100013001900

700700700700

300300300300

xxxx

xxxx


1SKC 020 001 F0001

1SKC 020 002 F0001

41SKC802020C0202

Distribution Enclosures - UNIKITSub-sub distribution - Kits for empty enclosuresOrdering details

UNIKIT 150 In = 250 A

Plain doorType Weight

kgOrdering details



GDUN150-01KPGDUN150-02KP

1SKU 124 152 C00091SKU 224 152 C0009

7001000

700700

150150

xx

xx



kgOrdering details



GDUN150-01KTGDUN150-02KT

1SKU 124 152 C00191SKU 224 152 C0019

7001000

700700

150150

xx

xx


UNIKIT 250 In = 630 APlain doorType Weight

kgOrdering details



GDUN250-03KPGDUN250-04KPGDUN250-05KPGDUN250-06KP


700100013001900

700700700700

300300300300

xxxx

xxxx



kgOrdering details



GDUN250-03KTGDUN250-04KTGDUN250-05KTGDUN250-06KT


700100013001900

700700700700

300300300300

xxxx

xxxx


1SKC 020 004 F0001

1SKC 020 003 F0001

1SKC 020 005 F0001

Distribution Enclosures - UNIKIT 150/250AccessoriesOrdering detailsPlain internal coversHightmm

Weightkg


0.350.701.051.402.102.803.50

50100150200300400500

GDUN-AC050GDUN-AC100GDUN-AC150GDUN-AC200GDUN-AC300GDUN250-AC400GDUN250-AC500

1SKA 514 000 R00011SKA 514 000 R00021SKA 514 000 R00031SKA 514 000 R00041SKA 514 000 R00051SKA 514 000 R00061SKA 514 000 R0007

EUN-150/250EUN-150/250EUN-150/250EUN-150/250EUN-150/250EUN-250EUN-250

Suitable for

Slotted internal covers for incoming devicesHightmm

Weightkg


2.102.802.802.802.802.80

300300400400400400

GDUN-AS1T1M3GDUN250-AS1T3M3GDUN250-AS1T4M4GDUN250-AS1T5M4GDUN250-AS1T5S4GDUN250-AS1T6S4

1SKA 515 000 R00011SKA 515 000 R00021SKA 515 000 R00031SKA 515 000 R00041SKA 515 000 R00051SKA 515 000 R0006

EUN-150/250EUN-250EUN-250EUN-250EUN-250EUN-250

Suitable for

T1 middleT3 middleT4 middleT5 middleT5 sideT6 side

Incoming MCCBType location

Internal back plates for outgoing horizontal fixingWeightkg

Ordering detailsType Code Type No.GDUN-ABP4T1MGDUN250-ABP6T1MGDUN250-ABP2T3SGDUN250-ABP3T3S

1SKA 520 000 R00611SKA 520 000 R00711SKA 520 000 R00811SKA 520 000 R0091

EUN-150/250EUN-250EUN-250EUN-250

Suitable for

T1 4 middleT1 6 middleT3 2 sideT3 3 side

Outgoing MCCB’sType Qty. location

Internal back plates for incoming vertical fixingWeightkg

Ordering detailsType Code Type No.GDUN-ABP1T1MGDUN250-ABP1T3MGDUN250-ABP1T4MGDUN250-ABP1T5MGDUN250-ABP1T5SGDUN250-ABP1T6S


EUN-150/250EUN-250EUN-250EUN-250EUN-250EUN-250

Suitable for

T1 1 middleT3 1 middleT4 1 middleT5 1 middleT5 1 sideT6 1 side

Incoming BusbarType Qty. location

Slotted internal covers for outgoing devicesHightmm

Weightkg


2.102.802.102.801.400.702.102.80

300400300400200100300400

GDUN-AS4T1M3GDUN250-AS6T1M4GDUN250-AS2T3S3GDUN250-AS3T3S4GDUN-ASMCB2GDUN-ASLP1GDUN250-ASME3GDUN250-ASMK4

1SKA 515 000 R00111SKA 515 000 R00121SKA 515 000 R00131SKA 515 000 R00141SKA 515 000 R00211SKA 515 000 R00311SKA 515 000 R00321SKA 515 000 R0033

EUN-150/250EUN-250EUN-250EUN-250EUN-150/250EUN-150/250EUN-250EUN-250

Suitable for

T1 4 middleT1 6 middleT3 2 sideT3 3 side1P MCB 28 -3 indication lamps with fuses*for measuring and indications*for measuring/kWh and indications*

Outgoing BusbarType Qty. location

* Opening cover with slotted location to fit indication or measuring,it doesn’t include the lamps or measuring devices.

51SKC802020C0202

1SKC 020 006 F0001

1SKC 020 007 F0001

1SKC 020 010 F0001

1SKC 020 011 F0001

1SKC 020 009 F0001

1SKC 020 008 F0001

61SKC802020C0202

Distribution Enclosures - UNIKIT 150/250AccessoriesOrdering details (continued)

Main busbar kits for middle busbar locationWeightkg

Ordering detailsType Code Type No.GDUN-A204T1MGDUN-A206T1MGDUN-A208T1MGDUN-A210T1MGDUN-A212T1MGDUN-A404T1MGDUN-A406T1MGDUN-A408T1MGDUN-A410T1MGDUN-A412T1M

1SKA 510 000 R00031SKA 510 000 R10031SKA 510 000 R20031SKA 510 000 R30031SKA 510 000 R40031SKA 510 000 R00021SKA 510 000 R10021SKA 510 000 R20021SKA 510 000 R30021SKA 510 000 R4002

size 4size 4size 5size 5size 6size 5size 5size 5size 6size 6

Suitable forCabinet

T1 4T1 6T1 8T1 10T1 12T1 4T1 6T1 8T1 10T1 12

OutgoingType Qty.

250250250250250400400400400400

BusbarRating A

Plinths & cable extension kits (for Unikit EUN-250)Description Weight

kgOrdering details

Type Code Type No.Plinth complete withplain flange plateSide extension cablechambers kit with door(can be assembled leftor right hand side)

GDUN250-ABA730GDUN250-ABA430GDUN250-AKS07GDUN250-AKS10GDUN250-AKS13GDUN250-AKS19


200200700100013001900

700400400400400400

300300300300300300

xxxxxx

xxxxxx


Mounting plateDescription Weight

kgOrdering details

Type Code Type No.Blankmounting plate

Perforatedmounting plate

GDUN-ABLKP2GDUN-ABLKP3GDUN-ABLKP4GDUN-ABMP2GDUN-ABMP3GDUN-ABMP4


200300400200300400

600600600600600600

141414141414

xxxxxx

xxxxxx


Joining kit side by side (for connecting two-cubicles or cubicle with side ext. chamber, side by side)Used for Weight

kgOrdering details

Type Code Type No.Panel size 3Panel size 4Panel size 5Panel size 6

GDUN250-AJS3GDUN250-AJS4GDUN250-AJS5GDUN250-AJS6

1SKA 580 000 C10011SKA 580 000 C10021SKA 580 000 C10031SKA 580 000 C1004

700100013001900

300300300300

xxxx

DimensionsH x D mm

Top plate for cable entry or outgoing from topUsed for Weight

kgOrdering details

Type Code Type No.Unikit 250 size 3-6Side extension chamber

GDUN250-ATBTE7GDUN250-ATBTE4

1SKA 590 000 C10071SKA 590 000 C1004

1SKC 020 012 F0001

1SKC 020 013 F0001

1SKC 020 014 F0001

1SKC 020 015 F0001

71SKC802020C0202

Neutral bars kitWeightkg

Ordering detailsType Code Type No.GDUN-A2NBGDUN-A4NBGDUN-A6NB

1SKA 512 000 R00031SKA 512 000 R00021SKA 512 000 R0001

size 3-6size 3-6size 3-6

Suitable forUNIKIT size

250400630

Rating A

The kit contains 3 pcs for L1/L2/L3.

Switch bars kitWeightkg

Ordering detailsType Code Type No.GDUN-ACBVT1GDUN-ACBVT3GDUN-ACBVT4GDUN-ACBVT5GDUN-ACBVT6

1SKA 511 000 R01601SKA 511 000 R02501SKA 511 000 R02551SKA 511 000 R04001SKA 511 000 R0630

size 3-6size 3-6size 3-6size 3-6size 3-6


T1-160 AT3-250 AT4-250 AT5-400 AT6-630 A

Used for

Earth bars kitWeightkg

Ordering detailsType Code Type No.GDUN-A2PEBGDUN-A4PEBGDUN-A6PEB

1SKA 513 000 R00031SKA 513 000 R00021SKA 513 000 R0001

size 3-6size 3-6size 3-6


250400630

Rating A

19” rack chassisWeightkg

Ordering detailsType Code Type No.GDUN-ARAC3GDUN-ARAC4GDUN-ARAC5GDUN-ARAC0

1SKA 570 000 C07731SKA 570 000 C10731SKA 570 000 C13731SKA 570 000 C0743

Panel size 3Panel size 4Panel size 5Side chamber

Used for

70010001300700

700700700400

300300300300

xxxx

xxxx


Distribution Enclosures - UNIKIT 150/250AccessoriesOrdering details (continued)

Main busbar kits for side busbar locationWeightkg

Ordering detailsType Code Type No.GDUN-A402T3SGDUN-A403T3SGDUN-A404T3SGDUN-A405T3SGDUN-A406T3SGDUN-A407T3SGDUN-A602T3SGDUN-A603T3SGDUN-A604T3SGDUN-A605T3SGDUN-A606T3SGDUN-A607T3S

1SKA 510 000 R04021SKA 510 000 R14021SKA 510 000 R24021SKA 510 000 R34021SKA 510 000 R44021SKA 510 000 R54021SKA 510 000 R00011SKA 510 000 R10011SKA 510 000 R20011SKA 510 000 R30011SKA 510 000 R40011SKA 510 000 R5001

size 5size 5size 5size 6size 6size 6size 5size 5size 6size 6size 6size 6

Suitable forCabinet

T3 2T3 3T3 4T3 5T3 6T3 7T3 2T3 3T3 4T3 5T3 6T3 7

OutgoingType Qty.

400400400400400400630630630630630630

BusbarRating A

1SKC 020 016 F0001

1SKC 020 017 F0001

1SKC 020 018 F0001

1SKC 020 019 F0001

81SKC802020C0202

Busbar holder - sheet steelNPE Insulator - 35NPE Insulator - 60Door lock complete with 2 keysDecorative corners kitHinge-set kitDecorative plates - sheet steelPlain flange plateQuick fastener element kitCommon DIN-railWall fixing supports (wall mounted)Document holder (bag A4)UNIKIT busbar insulator 10x30General internal holder, big size 6-holesGeneral internal holder, middle size 4-holesGeneral internal holder, small size 3-holesGeneral back plate

Weightkg

Packingunit

Ordering detailsType Code Type No.GDUN-SBH730GDUN-SIN35GDUN-SIN60GDUN-SCELAGDUN-SCOR20GDUN-SHINGDUN-SSH70FGDUN-SZP55EGDUN-SQF4GDUN-SDIN7GDUN-SWF4GDUN-SBOLAGDUN-SBRIBGDUN-SSDS07GDUN-SSDS04GDUN-SSDS03GDUN-SSDS10

1SKU 054 508 R30801SKU 056 601 R03501SKU 056 601 R06001SKU 059 408 R10021SKU 056 622 R00201SKU 051 902 R70351SKA 517 000 R00011SKU 054 508 R00011SKU 051 901 R00041SKU 053 109 R07001SKU 054 508 R10081SKU 054 508 R20101SKU 056 606 R10301SKA 516 000 R07001SKA 516 000 R04001SKA 516 000 R03001SKA 516 000 R1000

0.40

0.250.150.101.00

107550120102190104131015201

Description

Distribution Enclosures - UNIKIT 150/250Spare PartsOrdering details

GDUNS-QF4

GDUNS-COR20

GDUNS-CELA

GDUNS-HIN

GDUNS-BH730

1SKC 020 020 F0001

1SKC 020 021 F0001

1SKC 020 022 F0001

1SKC 020 023 F0001

1SKC 020 024 F0001

91SKC802020C0202

Distribution EnclosuresUNIKITOrdering Example

GDUN250-AC400

GDUN250-AS1T5M4

GDUN250-ABP1T5M

GDUN-AS4T1M3

GDUN-ABP4T1M

GDUN-AS4T1M3

GDUN-ABP4T1M

Type No.Completation

GDUN250-ASMK4

400

mm

400

mm

300

mm

300

mm

400

mm

Slotted cover for measuring & indication

Slotted cover for MCCB - T1, Middle

Back plate for qty. 4-T1, Middle

Slotted cover for MCCB - T1, Middle

Back plate for qty. 4-T1, Middle

Slotted cover for Incomer T5, Middle

Back plate for MCCB T5, Middle

Plain cover 400 mm Height

1900

mm

UNIKIT

UNIKIT empty, with busbar 400 A provision to fit incomerT5 - 400A MCCB and qty. 8 TPN T1N-160 A MCCB’s asoutgoing. 3-Indication lamps with fuses and measuringinstruments (3 Ameters, 1 Voltmeter + Selector volt)Main busbar 400A vertical, middle location GDUN-A408T1MNeutral bar 400A GDUN-A4NBEarth bar 400A GDUN-A4PEBSwitch bar for T5-400A GDUN-ACBVT5

101SKC802020C0202

Distribution EnclosuresUNIKITComplete enclosed solutions

We have provided below a set of standard solutions using the UNIKITenclosure system.

Load center distribution:

Complete with incoming and outgoing MCCB breakers, earth, neutrals and accessories

Inside components:Incoming MCCB (T3)-250A or T5-400/630AOutgoing MCCB (T1)-up to 160A

Street lighting:

Standard street lighting solution via manual or automatic control with photo cell.The photo-cell is activated when the illumination is less than 35 Lux within 30-60 sec. and turned automaticallyOFF when illumination is more than 125 Lux within the same time period.

Inside components:Incoming MCCB T1-160A with contactor A95Outgoing MCCB T1-up to 160A

RatedCurrent A

Weightkg


250400630

GDUN25-4LC4GDUN40-5LC6GDUN63-6LC8

1SKU 404 152 C10241SKU 406 152 C10241SKU 408 152 C1024

100013001900

700700700

300300300

xxx

xxx


Outgoingways468

RatedCurrent A

Weightkg


160 GDUN16-5SLG6 1SKU 506 152 C10221300 700 300x x


Outgoingways6

PHC

111SKC802020C0202

Distribution EnclosuresUNIKITComplete enclosed solutions (continued)

ATS-Automatic transfer switch:

Automatic transfer of power source between the utility network and standby generation.

Sequence of Operation:

Only one source is “ON” in normal case the main source “for example the authority networktransformer” [Q1].

- A standby source “for example standby diesel generator” is ready for any emergency dueto power failure in the main source. [Q2]

- After the recovery of main source [Q1], the standby source is shut down and the mainsource gets its function as well.

- The function can expand to Start/Stop diesel through one extra contact.- Scheduled running test for the diesel to ensure that it will be ready to run at emergencysituations.

Inside components:Incoming MCCB T3-250A with motor and mechanical interlockOutgoing to the customer from busbar

Battery charger BC 130A:

The charger is intended to charge Ni-Cd and lead-acid batteries. The batteries achieve the largest servicelife when remaining at rest in charge condition. The resting condition will realized if the rectifier device takesover the load only in case of mains failure, this operation method is called stand by parallel operation.

Main features:- Soft start on power-up.- Extra stability for active loads.- Peak sensing current limit.- Reduced levels of ripples and harmonics.- The same control module set for whole range.- Extensive range.- More standard features and alarm functions.

Specifications:Input voltage :3-phase 380 V +/- 20%, 50HzFrequency :(47-63 Hz steady state)Output nominal battery voltage : 110VAdjustment range; float charging :90 to 140V set. At 127VAdjustment range; boost charging :110 to 165V set. At 140VAdjustment range; :130 to 170Vmanual or commissioning

RatedCurrent A

Weightkg


250 GDUN25-6ATS 1SKU 600 152 C10261900 700 300x x


RatedCurrent A

Weightkg


130 GDUN13-6CHGR 1SKU 600 152 C10251900 700 300x x


F.V. Without Outer Door

TERMINAL

TERMINAL

Standby

Load Breaker Q3

DieselAuthority

Trans

Source-1 Source-2

Q1 Q2

121SKC802020C0202

Distribution EnclosuresUNIKITComplete enclosed solutions (continued)

Isolated power supply circuits model IT-system:

It can be used as associated equipments for isolated power supply circuits which is called IT-system wherethe first letter “I” means insulation from earth or connection of a point (usually the neutral) to earth bymeans of impedance. And the second letter “T” means the exposed conductive parts connected to earth.This applications is more essential for safety.

Inside components:Isolating transformerIsolator with fuse links to protect primary circuit2-pole circuit breaker for secondary circuit protectionInsulating monitoring device IMDIsolator with fuse links for IMD protectionTerminal blocks with wiring trunking.

Weightkg

Ordering detailsType Code Type No.GDUN-5IT 1SKU 504 152 C10271300 700 300x x


Fuse distribution kiosk:

It is considered as one of the most popular applications for outdoor power distribution in utility.

Inside components:Two feeders Incoming HRC 630A NH3Four feeders outgoing HRC 250A NH2

RatedCurrent A

Weightkg


630 GDUN63-5FU4 1SKU 504 152 C10231300 700 300x x


Outgoingways4

Contact us

ABB7 Dr. Mohamed Kamel Hussein St.,El Nozha El Gedeida, Heliopolis. Cairo, Egypt.Tel.: + 202 2622 4660Sales Tel.: + 202 2625 1448 - 2625 1446Fax: + 202 2622 [email protected]

www.abb.com/mea/lowvoltage

As part of its on-going product improvement, ABB reservesthe right to modify the characteristics or the productsdescribed in this document. The information given is not-contractual. For further details please contact the ABBcompany marketing these products in your country.

No:

1SK

C80

2020

C02

02 -

Prin

ted

in E

gypt

(Feb

. 200

9) -

ein

adv

ertis

ing

desi

gns

Documents

System pro E energy PRIMO - El Sewedy