Swiss Instruments - Electronic Indicators · Models DIGICO® 10 Provided with all the features listed above. Brown & Sharpe Series 1034, DIGICO® 10 and 11 Electronic Indicators These

External Micrometers

E-3

External MicrometersElectronic Indicators

DIGICO® 1 and 2Electronic IndicatorsBoth models are remarkable for their versatile functions, large measuring spanand high accuracy.

• Analog and digital display.• Digital display can be placed in any position for easy reading.• Zero-setting at any point within the measuring span.• Data input through the keyboard.• Counting sense reversal.• Classification of measured values through symbols; in the external power

supply mode, the display lights up with a green background or changes toorange or red if the part is not within tolerance.

• Value storage by means of the functions “Highest value”, “Lowest value” or“Highest value minus lowest value”.

in in mm mm

19.30000 86508 DIGICO 1 1.18 0.00005 or 0.0005 30 0.001 or 0.0119.30001 26752 DIGICO 2 3.36 0.00005 or 0.0005 60 0.001 or 0.01

�

LC displaywith colored

background

6 digits plus minus sign

.354" x .177" /9 x 4.5 mm digit

height (HxW)

See thetable opposite

mm / inConversion

1.50 in / 40 mmscale length

25scale divisions

According toselectedtolerances

1.20 in/ 30.4 mm(DIGICO 1)

or 2.376 in / 60.4 mm(DIGICO 2)

Incrementalglass scale

Max. 1 m/s (DIGICO 1) or

max. 2 m/s (DIGICO 2)

Plungerguiding

on a plain bearing

M2.5 thread for themeasuring insert

DIGICO 1: 2 μmDIGICO 2: 3 μm

1 μm

1 μm

See tableon page E-4

RS-232

3.6 Vlithium battery

or mains adapter

BRO-03-015E_Indic_1-23:BRO 03 015E Indic 1-23 8/7/06 1:37 PM Page 3


E-4

Electronic Indicators

Accessories for DIGICO® 1 and 2

�47.61057 88310 110 V mains adapter19.60007 26761 3.6 V lithium battery, LR6, AA19.60005 86331 Lever for the plunger retraction35.40203 41139 Plunger retract cable, 8.5 in / 220 mm long

Measuring Force

Measuring force* closeto the plunger stop– bottom: 0.85 N ± 0.15 N 0.90 N ± 0.20 N– top: 1.10 N ± 0.20 N 1.45 N ± 0.25 NForce hysteresis*: 0.10 N 0.15 N* Valid with the indicator used vertically, with downward oriented

plunger, or in static measurement.

DIGICO 1 DIGICO 2

≈ 1000 h withlithium battery

0.002 % / °C

50 °F to 104 °F

50 °F to 122 °F

�

Degree of protection

(IEC 60529): IP 54 (standard model housing)

.6 lb / 290 g (DIGICO 1)

.7 lb / 310 g (DIGICO 2)

Moved mass (plunger) :DIGICO 1: 28 gDIGICO 2: 27 g

Suppliedin a suited

carrying case with :1 lithium batteryNo. 19.600071 lever No. 19.60005

Identificationnumber

Inspection report with a

declaration of conformity



E-5


Models DIGICO® 10Provided with all the features listed above.

Brown & Sharpe Series 1034,DIGICO® 10 and 11 Electronic IndicatorsThese three versions are made for optimum adaptation to your metrology-based applications.

• Zero-setting of display anywhere within the measuring span.• Display and keyboard rotate through 270°.• Ability to hold the measured values.• Digit entry (PRESET function).• Two reference points.• Digital output.

�

LC display. 6 digits

plus minus sign

.335 in / 8.5 mmdigit height

See tables

mm / inConversion

Glass scalewith capacitive,

incremental divisions

Max. perm. : 1.5 m / s

Case in lightalloy. Front face

in polyamide.

Stainless steel plungerguided on a plain bearing.

M2.5 thread for themeasuring insert.

See tables

2 μm

2 μm(.0001"/0.001 mm)

RS-232, opto-coupled

3V lithiumbattery, type

CR 2032.

DIGICO 10: ≈ 4000 h

DIGICO 11 / MIN/MAX:≈ 2000 h

41 °F to 104 °F

68 °F to 140 °F

EN 50081-1: 1993

EN 50082-1: 1993

599-1034



E-6


IEC 60529: IP 51

See tables

Supplied in asuited carrying

case with :1 lithium battery, type CR 2032, No. 19.61000

Identificationnumber

Inspection report with a

declaration of conformity

DIGICO® MIN/MAXWith same basic features as DIGICO 11 except that PRESET function is not available.

• Mainly used for value classification through the function “Highest value minus lowest value”.

in in mm mm μm Amm Bmm g

19.30120 28637 0.5 0.00005 12.5 0.001 5 65.9 53.4 12019.30121 28638 1 0.00005 25 0.001 5 78.4 53.4 130


599-1034 86378 1 0.00005 25 0.001 5 78.4 53.4 130

19.30110 26756 0.5 0.0005 12.5 0.01 10 65.9 53.4 12019.30111 26757 1 0.0005 25 0.01 10 78.4 53.4 13019.30112 26758 2 0.0005 50 0.01 20 150.5 90.5 21019.30113 26759 4 0.0005 100 0.01 20 250.5 140.5 250

19.30101 26753 0.5 0.00005 12.5 0.001 5 65.9 53.4 12019.30100 26760 1 0.00005 25 0.001 5 78.4 53.4 13019.30102 26754 2 0.00005 50 0.001 12 150.5 90.5 21019.30103 26755 4 0.00005 100 0.001 15 250.5 140.5 250


19.30104 27281 0.5 0.00005 12.5 0.001 5 65.9 53.4 12019.30105 27280 1 0.00005 25 0.001 5 78.4 53.4 130

DIGICO® 11With same basic features as set forth on page E-7 plus the following functions:

• Possible entry of limiting values for classification through color LEDs: green for “Good”, red for “Scrap”, amber for “Rework”.

• Value storage using the functions “Highest value”, “Lowest value” and“Highest value minus lowest value”.

• Counting sense reversal.



E-7


in in mm mm

Models IP65 with electronic module protected against the penetration of liquids 01930130 29017 0.5 0.0005 12.5 0.01 without01930132 29018 0.5 0.00005 or 0.0005 12.5 0.001 or 0.01 with

Models IP65 with both mechanics and electronics protected against the penetration of liquids 01930131 28885 0.5 0.0005 12.5 0.01 without01930133 28884 0.5 0.00005 or 0.0005 12.5 0.001 or 0.01 with

TESA DIGICO™ 12 Mini-Dial Gages, ElectronicIP65 compliant – Made to measure in extreme workshop conditions. Water andcoolant resistant.

60∞

8.54

6.4 ø 1.5

1.65

5818

25.8

101.

8

TESA DIGICO 12 Standard Models• 1.73 in / 44 mm diameter dial• IP65 compliant – Water and coolant resistant• RS-232 data output combined with

external power supply• Patented inductive measuring system • Choice between absolute “ABS” and

relative “REL” measuring modes• Numerical display• PRESET function• Switchable measuring direction• Direct inch/metric conversion• Automatic shut down

42.5

13

1318

5812

.5

19.3

5

Ø 4

Ø 8 h6

13

101.

5

Ø 44

�

LCD, 5 digits + sign

Digit height: .24 in / 6 mm

Zero-setting of display

Max. error: 20 μm

5 μm

0.5 to 0.9 N (±0.15 N)

max. 2 m/s

Number of measurements per second: 7Working tempe -rature range: 41 °F to 104 °F /+5 °C to +40 °C

3V lithium battery,type CR 2032

Battery life: > 3500 hours

RS-232

2.5 oz / 70 g

EN 61326-1

IP65 (IEC 529)

Shipping packaging incl. 1 lithium

battery, type CR 2032 (No. 01961000)

Serial number

Declaration ofconformity

(Diagram dimensions shown in mm)



E-8


60∞

8.54

6.4 ø 1.5

1.65

TESA DIGICO 12 – HP Models• High-precision measuring system• IP65 compliant – Water and coolant resistant• Combined analog/digital display• Analog readout: ± 0.025 – ±1.25 mm• Measuring modes: NOR/MIN/MAX/MAX-MIN• 1.73 in / 44 mm diameter dial• RS-232 data output combined with

external power supply• Patented inductive measuring system • Zero-setting of display• Direct inch/metric conversion• Automatic shut down. Can also be locked

50.5

1816

.3

84.8

42.5

13

5.5

1850

.512

.5

19.3

5

Ø 4

Ø 8 h6

13

86.5

Ø 44

1050

24.5

55

15

52.5

1

95

5

Ø 2.5/4

19.05

6.4

9.5

14.3

ø 6.4

26.2

03238013

01961012

01961013

in in mm mm

Models IP65 with electronic module protected against the penetration of liquids 01930134 28890 0.210 0.00005 or 0.0005 5 0.001 or 0.01

Models IP65 with both mechanics and electronics protected against the penetration of liquids 01930135 29546 0.210 0.00005 or 0.0005 5 0.001 or 0.01

Accessories03238013 29547 Back with lug01961012 29548 Upper lift lever01960005 29549 Lower lift lever01961013 29550 Pneumatic retraction device04761060 29551 RS-232 connection cable with external power supply01961000 29552 3V lithium battery, type CR 2032, 190 mAh

�

LCD, 5 digits + sign

Digit height: 24 in / 6 mm

Zero-setting of display

Max. error: 4 μm

2 μm

0.4 to 0.75 N (±0.15 N)

Max. 2 m/s

Number of measurements per second: 9Working tempe -rature range: 41 °F to 104 °F /+5 °C to +40 °C3V lithium battery, type CR 2032

Battery life: > 4000 hours

RS-232

2.5 oz / 70 g

EN 61326-1

IP65 (IEC 529)

Shipping packaging incl. 1 lithium

battery, type CR 2032 (No. 01961000)

Serial number

Inspection reportwith a declarationof conformity





E-9


Digit-Dial plus Air Release Cable

Digit-Dial plus Mech. Release Cable

Digit-Dial® plus Digital IndicatorDigit-Dial plus con forms to AGD Group 2 mechanical spec i fi ca tions. Its ex cel lent re sponse al lows spindle travel up to 20 in/sec. In addition, Digit-Dialplus features selection of either English or metric readout with direct con ver sion,preset ca pa bil ity, a se lectable display pro vid ing maxi mum, minimum and rangevalues with out put for SPC applications:

Digit-Dial plusLift Lever

Ordering Information:599-1033 25843 Digit-Dial plus596-1033-82 87011 Optional Output Cable

RS-232 - 25 Pin - for PC595-G-0196B 25463 Optional Output Cable - 10 Pin

Accessories599-1033-12 25848 Digit-Dial plus Lift Lever599-1033-13 25849 Digit-Dial plus Contact Point599-1033-14 25850 Digit-Dial plus Flat Back599-1033-15 25851 Digit-Dial plus Lug Back599-1033-16 25852 Digit-Dial plus 1" Dust Bellow599-1033-17 25956 Digit-Dial plus Release Cable Adapter599-1033-18 25957 Digit-Dial plus Air Release Cable599-1033-19 25958 Digit-Dial plus Mech. Release Cable

Measuring range . . . . . . . . . . 1 in. (25.4 mm)

Display . . . . . . . . . . . . . . . . . . 6 digit LCD with sign

Resolution. . . . . . . . . . . . . . . . 0.00005 in. (1 μm)

Accuracy at 68° F (20° C) . . . ±0.00005 in. (±1 μm)

Response speed . . . . . . . . . . 20 in/sec (500 mm/sec)

Measuring force . . . . . . . . . . . 5.3 oz. (150 g)

Display mode . . . . . . . . . . . . . Maximum value, Mini mumvalue or Range (maxi mum to mini mum), Absolute, Preset

Power supply 120 VAC/60 Hz AC adapter(part number 99-1033-2)or self-con tained re charge ablebat tery, con tinu ous op era tionfor 8 hours on full charge (part number 99-1033-17).

1 in / 25.4 mmRange

LC display.6 digits

plus minus sign

1 μm

mm / inConversion

RS-232Output

5.3 oz / 150 g


Documents

Swiss Instruments - Electronic Indicators · Models DIGICO® 10 Provided with all the features listed above. Brown & Sharpe Series 1034, DIGICO® 10 and 11 Electronic Indicators These