Duration approximately 4 hours

Participants 10 maximum

Seminar Style Seminars are conducted in an open style with attendees encouraged to participate with both questions and “hands-on” practical demon-strations.

Venue/EquipmentA room with a screen and whiteboard is preferable. We will provide all tooling, fittings and tube necessary for the practical training.

Supplied MaterialsSwagelok Tube Fitters ManualTraining Resource Manual

Suitable AttendeesThe class is designed for anyone who works with tube fittings,including but not limited to, the fabricators, contractors, operators,engineers and technicians who are responsible for the integrity ofany fluid system installation.

Our Tube Fitting Installation Inspection Essentials course is designed to teach attendees how to mitigate and minimise risk of leakage through proper small bore tubing system inspection.

This course is aimed at but not limited to Engineers, Supervisorsand operators that require a skill set that enables them to identify incorrect installations in the field.

SWAGELOK® TRAINING SERIESTUBE FITTING INSTALLATION INSPECTION

OVERVIEW

DETAILS

� List common errors leading to tube fitting leakage � Identify correct tube system design practices � Install Tube Fittings correctly � Identify mixed material fittings � Identify variables associated with proper tube selection � Identify tube bending defects � Validate correct pipe thread usage and assembly

ASSESSMENTParticipants are given a comprehensive practical examination at the completion of the training in order to prove their level of competency. All graduates will receive a certificate of completion and a complimentary wallet sized training card. The card may be used as an identifier to ensure holder of the card has the knowledge and competency necessary to identify improper tube fitting installations.

REVIEWAll participants will be required to fill out an attendance and assessment form. This provides valuable feedback to our trainers who can then further tailor the course to meet the changing needs of your staff when re-training in the future.

1. Common errors associated with tube fitting leakage a. Tube fatigue b. Tube blow-out c. Improper installation d. Corrosion

2. Tube bending defects a. Wrinkled b. Flattened c. Kinked d. Scored

3. Tube Fitting Installation a. Various sizes of tube fittings b. Identifying fittings and components c. Tube Fitting Inspection Techniques

4. Pipe Thread Inspection a. Thread Terminology b. Installation procedures c. Threaded joint inspection

5. Practical component a. Tube fitting Inspection exercise

LEARNING OUTCOMES

SKILLS OBTAINED

© 2018 Swagelok Eastern Australia and New Zealand © 2018 Swagelok Company