109
An Installer’s Pocket Guide for Swagelok ® Tube Fittings www.swagelok.com

An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

  • Upload
    others

  • View
    10

  • Download
    0

Embed Size (px)

Citation preview

Page 1: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

An Insta l ler ’sPocket Guidefor Swagelok®

Tube F i t t ings

www.swagelok.com

Page 2: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

3

Contents

Interchangeability . . . . . . . . . . . . . . . . . . . . . . 8

Safety Precautions . . . . . . . . . . . . . . . . . . . . . 9

Installation Instructions■ 1 in./25 mm and Under Fittings. . . . . . . . . . . . . . . 10■ Tube Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . 12■ Port Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 12■ Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13■ Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13■ Preswaging Tool . . . . . . . . . . . . . . . . . . . . . . . . . 13■ Weld Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . 14■ Positionable Elbows and Tees. . . . . . . . . . . . . . . 15■ O-Seal Male Connectors. . . . . . . . . . . . . . . . . . . 15

Hydraulic Swaging Units■ Multihead (MHSU) . . . . . . . . . . . . . . . . . . . . . . . 16■ Air-Actuated (AHSU). . . . . . . . . . . . . . . . . . . . . . 16

Tubing Installation . . . . . . . . . . . . . . . . . . . . 17

Tubing Data■ Fractional Carbon Steel Tubing. . . . . . . . . . . . . . 18■ Metric Carbon Steel Tubing . . . . . . . . . . . . . . . . 20■ Fractional Stainless Steel

Seamless Tubing . . . . . . . . . . . . . . . . . . . . . . . . 22■ Metric Stainless Steel Seamless Tubing . . . . . . . 24■ Fractional Copper Tubing . . . . . . . . . . . . . . . . . . 26

Ordering Information . . . . . . . . . . . . . . . . . . 27

Page 3: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

Straight Configurations

Unions■ Union . . . . . . . . . . . . . . . . . . . . . . 28■ Reducing Union . . . . . . . . . . . . . . 29■ Bulkhead Union . . . . . . . . . . . . . . 32■ Bulkhead Reducing Union. . . . . . . 33■ AN Union . . . . . . . . . . . . . . . . . . . 33■ AN Bulkhead Union . . . . . . . . . . . 34■ Tube Socket Weld Union. . . . . . . . 34

Male Connectors■ NPT Thread . . . . . . . . . . . . . . . . . 35■ ISO Tapered Thread (RT) . . . . . . . 37■ ISO Parallel Thread (RS) . . . . . . . 39■ ISO Parallel Thread (RP) . . . . . . . 41■ Bulkhead NPT . . . . . . . . . . . . . . . 42■ SAE/MS Straight Thread. . . . . . . . 43■ O-Seal SAE/MS

Straight Thread. . . . . . . . . . . . . . . 44■ O-Seal NPT Thread . . . . . . . . . . . 44■ Pipe Weld . . . . . . . . . . . . . . . . . . 45

Female Connectors■ NPT Thread . . . . . . . . . . . . . . . . . 47■ ISO Tapered Thread (RT) . . . . . . . 49■ ISO Parallel Gauge

Thread (RG) . . . . . . . . . . . . . . . . . 50■ Bulkhead NPT . . . . . . . . . . . . . . . 51

Reducers■ Reducer . . . . . . . . . . . . . . . . . . . . 52■ Long Reducer . . . . . . . . . . . . . . . . 55■ Bulkhead Reducer . . . . . . . . . . . . 55

Port Connectors■ Port Connector . . . . . . . . . . . . . . . 56■ Reducing Port Connector . . . . . . . 57

4

Page 4: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

5

Caps and Plugs■ Cap . . . . . . . . . . . . . . . . . . . . . . . 58■ Plug . . . . . . . . . . . . . . . . . . . . . . . 59

Vent Protectors . . . . . . . . . . . . . . 60

Flanges■ ANSI. . . . . . . . . . . . . . . . . . . . . . . 61■ EN . . . . . . . . . . . . . . . . . . . . . . . . 61■ DIN. . . . . . . . . . . . . . . . . . . . . . . . 62■ JIS . . . . . . . . . . . . . . . . . . . . . . . . 62

Elbows—90° Configurations

Unions■ Union Elbow . . . . . . . . . . . . . . . . . 63■ Tube Socket Weld Union. . . . . . . . 64

Male Connectors■ NPT Thread . . . . . . . . . . . . . . . . . 65■ ISO Tapered Thread . . . . . . . . . . . 67■ Positionable—

SAE/MS Straight Thread. . . . . . . . 68■ Positionable—

ISO Parallel Thread . . . . . . . . . . . 69■ Pipe Weld. . . . . . . . . . . . . . . . . . . 70

Female Connectors■ NPT Thread . . . . . . . . . . . . . . . . . 71

Elbows—45° Configurations

Male Connectors■ NPT Thread . . . . . . . . . . . . . . . . . 72■ Positionable—

SAE/MS Straight Thread. . . . . . . . 72

Page 5: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

6

Tees

Unions■ Union . . . . . . . . . . . . . . . . . . . . . . 73■ Reducing Union . . . . . . . . . . . . . . 74

Male Connectors■ Branch, NPT Thread . . . . . . . . . . . 76■ Run, NPT Thread . . . . . . . . . . . . . 77■ Positionable Run,

SAE/MS Straight Thread. . . . . . . . 78■ Positionable Run,

ISO Parallel Thread . . . . . . . . . . . 79■ Positionable Branch, SAE/MS

Straight Thread . . . . . . . . . . . . . . 80■ Positionable Branch,

ISO Parallel Thread . . . . . . . . . . . 81

Female Connectors■ Run, NPT Thread . . . . . . . . . . . . . 82■ Branch, NPT Thread . . . . . . . . . . . 83

Union Cross . . . . . . . . 84

Tube Adapters

Male Adapters■ NPT Thread . . . . . . . . . . . . . . . . . 85■ ISO Tapered Thread (RT) . . . . . . . 86■ ISO Parallel Thread (RS) . . . . . . . 87■ ISO Parallel Thread (RP) . . . . . . . 88■ SAE/MS Straight Thread . . . . . . . 88■ O-Seal SAE/MS

Straight Thread. . . . . . . . . . . . . . . 89■ AN Thread . . . . . . . . . . . . . . . . . . 89■ Pipe Weld. . . . . . . . . . . . . . . . . . . 90

Female Adapters■ NPT Thread . . . . . . . . . . . . . . . . . 91■ ISO Tapered Thread (RT) . . . . . . . 92■ ISO Parallel Thread (RP) . . . . . . . 93■ ISO Parallel Gauge Thread (RG). . 94■ AN Thread . . . . . . . . . . . . . . . . . . 94

Page 6: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

7

Replacement Parts

Nuts■ Female . . . . . . . . . . . . . . . . . . . . . 95■ Knurled Female . . . . . . . . . . . . . . 95■ Male . . . . . . . . . . . . . . . . . . . . . . . 96

Ferrules■ Nut-Ferrule Set, Package . . . . . . . 96■ Ferrule Set, Ferrule-Pak™ . . . . . . 97■ Front. . . . . . . . . . . . . . . . . . . . . . . 98■ Back . . . . . . . . . . . . . . . . . . . . . . . 99

ISO Parallel Gaskets■ Steel Gasket

ISO Parallel Thread (RS) . . . . . . 100■ Copper Gasket

ISO Parallel Thread (RP) . . . . . . 100■ Copper Gasket ISO

Parallel Gauge (RG) . . . . . . . . . . 100

O-rings■ For ISO Parallel Threads. . . . . . . 101■ For SAE/MS Straight Threads . . . 101■ For O-Seal Straight Threads . . . . 101■ For O-Seal Pipe Threads . . . . . . 102

Tools and Accessories

Gap Inspection Gauges . . . . . . 102

Bulkhead Retainer. . . . . . . . . . . 104

Preswaging Tool . . . . . . . . . . . . 105

Insert for Tygon® orSwagelok Vinyl Tubing . . . . . . . 106

Part Numbering . . . . . . . . . . . 107

Page 7: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

8 INTERCHANGEABILITY

InterchangeabilityOther tube fitting manufacturers often claim that theircomponents are interchangeable with Swagelok tubefitting components.

We believe that interchanging and intermixing tubefitting components of different designs, made bydifferent manufacturers, can result in leaks and tubeslippage in a percentage of cases. We also believe thispractice can be dangerous in critical applications.

Leak-tight seals that will withstand pressure, vibration,vacuum, and temperature changes depend upon closetolerances and consistent, exacting quality control inconjunction with good design principles.

The full value we build into Swagelok tube fittings islost when components from other manufacturers areinterchanged or intermixed with ours. We believe thatany manufacturer’s fitting performs best when only thatmanufacturer’s components are used in its fittings.

We do not believe that a tube fitting made up byinterchanging and intermixing components of othermanufacturers with genuine Swagelok tube fittingcomponents will perform to the high standards ofan all-Swagelok tube fitting.

Page 8: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

9SAFETY PRECAUTIONS

Safety Precautions■ Do not bleed the system by loosening the fitting nut

or fitting plug.

■ Do not make up and tighten fittings when the systemis pressurized.

■ Make sure that the tubing rests firmly on the shoulderof the tube fitting body before tightening the nut.

■ Use the Swagelok gap inspection gauge to ensuresufficient pull-up upon initial installation.

■ Never allow problems to go unreported.

■ Always use proper thread sealants on taperedpipe threads.

■ Do not mix materials or fitting components fromvarious manufacturers—tubing, ferrules, nuts, andfitting bodies.

■ Never turn the fitting body. Instead, hold the fittingbody and turn the nut.

■ Avoid unnecessary disassembly of unused fittings.

■ Use only long reducers in female Swagelok ports.

■ Additional tubing considerations:

1. Metal tubing material should be softer than fittingmaterial. For example, stainless steel tubingshould not be used with brass fittings.

2. When tubing and fittings are made of the samematerial, tubing must be fully annealed.

3. Always use an insert with extremely soft or pliableplastic tubing.

4. Wall thickness should always be checked againstthe fitting manufacturer’s suggested minimum andmaximum wall thickness limitations.

5. Surface finish is very important to proper sealing.Tubing with any kind of depression, scratch,raised portion, or other surface defect will bedifficult to seal, particularly in gas service.

6. Tubing that is oval and will not easily fit throughfitting nuts, ferrules, and bodies should never beforced into the fitting.

Page 9: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

10

Installation InstructionsNote: These instructions apply to traditional fittings andfittings with the advanced back-ferrule geometry.

1. Insert tubing into theSwagelok tube fitting(Fig. 1).

2. Make sure that thetubing rests firmly onthe shoulder of the tubefitting body and that thenut is finger-tight.

3. Scribe the nut at the6 o’clock position(Fig. 2).

4. While holding fitting bodysteady, tighten the nut1 1/4 turns (see note)to the 9 o’clock position.(Fig. 3)

Note: For 1/16, 1/8,and 3/16 in.; 2, 3, and4 mm tube fittings, tightenthe nut 3/4 turn to the3 o’clock position.

Installation in High-Pressure Applicationsand High Safety-Factor Systems1. Insert tubing into the Swagelok tube fitting (Fig. 1).2. Make sure that the tubing rests firmly on the shoulder

of the tube fitting body.3. Due to the variations of tubing diameters, a common

starting point is desirable. Therefore, tighten the nutuntil the tubing will not turn by hand or move axiallyin the fitting.

4. Scribe the nut at the 6 o’clock position (Fig. 2).5. While holding fitting body steady, tighten the nut

1 1/4 turns (see note) to the 9 o’clock position (Fig. 3).

Note: For 1/16, 1/8, and 3/16 in.; 2, 3, and 4 mm tubefittings, tighten the nut 3/4 turn to the 3 o’clock position.

Swagelok Tube FittingInstructions for 1 in./25 mmand Under Fittings

Fig. 3

Fig. 1

Fig. 2

INSTALLATION INSTRUCTIONS

Page 10: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

11

GaugeabilityOn initial installation, theSwagelok gap inspectiongauge assures the installer orinspector that a Swagelokfitting has been sufficientlytightened.

Position the Swagelok gapinspection gauge next to thegap between the nut andbody.

■ If the gauge will not enterthe gap, the fitting issufficiently tightened (Fig. 4).

■ If the gauge will enter thegap, additional tightening is required (Fig. 5).

Note: Swagelok gap inspection gauges, except forMS-IG-468 and MS-IG-612M, can be used with high-pressure and high safety-factor installations to assurethe installer or inspector that a fitting has beensufficiently tightened.

Reassembly InstructionsYou may disassemble and reassemble a Swageloktube fitting, port connector, cap, and plug many times.

1. Insert tubing with preswaged ferrules into the fittingbody until the front ferrule seats (Fig. 6).

2. Rotate the nut with a wrench to the previouslypulled-up position; at this point a significantincrease in resistance will be encountered.

3. Tighten slightly with a wrench (Fig. 7).

Note: Do not use the gap inspection gauge withreassembled fittings.

Fig. 6

Fig. 7

Fig. 4

Fig. 5

INSTALLATION INSTRUCTIONS

Page 11: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

12 INSTALLATION INSTRUCTIONS

Tube AdaptersInstallation Instructions1. Install the end opposite the

tube adapter end (Fig. 8).2. Insert the tube adapter into

the Swagelok tube fitting.Make sure that the tubeadapter rests firmly on theshoulder of the tube fittingbody and that the nut isfinger-tight (Fig. 9).

3. Scribe the nut at the 6o’clock position.

4. While holding fitting bodysteady, tighten the nut 1 1/4 turns (see note) to the9 o’clock position.

Note: For 1/16, 1/8, and 3/16 in.; 2, 3, and 4 mm tubefittings, tighten the nut 3/4 turn to the 3 o’clock position.

Swagelok Tube Fitting to AN Adapter1. Tighten the AN nut by hand.2. Rotate the AN nut with a wrench until a significant

increase in resistance is encountered.3. Tighten slightly with a wrench.

Note: Do not use the gap inspection gauge withreassembled fittings.

Port ConnectorsInstallation Instructions—Machined Ferrule End1. Remove the nut and ferrules

from one Swagelok tubefitting end.

2. Place the nut over themachined ferrule end ofthe port connector (Fig. 10).

3. Turn the nut onto the fitting sothat it is finger-tight (Fig. 11).

4. Scribe the nut at the 6 o’clock position.5. While holding fitting body steady, tighten the nut

1/4 turn (see note) to the 9 o’clock position.

Note: For 1/16, 1/8, and 3/16 in.; 2, 3, and 4 mm tubefittings, tighten the nut 1/8 turn.

Female pipe porton existing equipment

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Page 12: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

13INSTALLATION INSTRUCTIONS

Port Connectors (continued)

Installation Instructions—Tube Adapter End1. Insert the tube adapter into the

Swagelok tube fitting. Makesure that the tube adapterrests firmly on the shoulder ofthe tube fitting body and that the nut is finger-tight(Fig. 12).

2. Scribe the nut at the 6 o’clock position.3. While holding fitting body steady, tighten the nut 1 1/4

turns (see note) to the 9 o’clock position. Note: For 1/16, 1/8, and 3/16 in.; 2, 3, and 4 mmtube fittings, tighten the nut 3/4 turn to the 3 o’clockposition.

PlugsInstallation InstructionsWhile holding fitting body steady, tighten the plug1/4 turn (see note) from the finger-tight position.

Note: For 1/16, 1/8, and 3/16 in.; 2, 3, and 4 mm tubefittings, tighten the plug 1/8 turn.

CapsInstallation InstructionsSee tube fitting installation instructions.

Preswaging ToolInstallation Instructions1. Install the Swagelok nut and ferrules onto the

preswaging tool.2. Insert tubing into the preswaging tool.3. Make sure that the tubing rests firmly on the shoulder

of the preswaging tool body and that the nut isfinger-tight.

4. Scribe the nut at the 6 o’clock position.5. While holding the preswaging tool steady, tighten the

nut 1 1/4 turns (see note) to the 9 o’clock position(Fig. 13).

Note: For 1/16, 1/8, and 3/16 in.; 2,3, and 4 mm tube fittings,tighten the nut 3/4 turn to the3 o’clock position.

Fig. 12

Fig. 13

Page 13: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

6. Loosen the nut.7. Remove the tubing with

preswaged ferrules from thepreswaging tool.

Note: If the tubing sticks in thepreswaging tool, remove thetubing by gently rocking it backand forth. Do not turn the tubing(Fig. 14).

8. Insert tubing with reswagedferrules into the fitting bodyuntil the front ferrule seats.

9. Rotate the nut with a wrench until a significantincrease in resistance is encountered.

10.Tighten slightly with a wrench (Fig. 15).

Note: Do not use the gap inspection gauge with fittingsthat were assembled using the preswaging tool.

Weld FittingsWelding Precautions1. Remove the nut and ferrules.2. Turn another Swagelok nut or tube fitting plug onto

the fitting so that it is finger-tight.3. Provide a suitable heat sink to dissipate the heat.4. Tack weld at four positions 90° apart to hold the

fitting in place.5. Complete the weld.6. Remove the plug or nut and replace the nut and

ferrules.

Caution: When welding carbon steel fittings, theheat often removes the protective oil from theSwagelok tube fitting threads. It is important toapply another lubricant, such as Goop® threadlubricant.

14 INSTALLATION INSTRUCTIONS

Fig. 14

Fig. 15

Page 14: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

15INSTALLATION INSTRUCTIONS

Positionable Elbows and TeesInstallation Instructions1. Turn the positionable end into

the female fitting until the metalbackup washer contacts theface of the fitting.

2. Turn the positionable endout of the female fitting(not more than one turn) until theSwagelok tube fitting end is positioned properly.

3. While holding fitting body steady, tighten the lock nutuntil the metal backup washer contacts the face ofthe fitting.

4. For SAE/MS straight threads, tighten to theappropriate torque as listed in SAE J1926. For ISOparallel threads, tighten slightly with a wrench.

O-Seal Male ConnectorsInstallation Instructions1. Turn the O-seal connector into the female end until it

is finger-tight.2. Tighten the O-seal connector until it makes metal-to-

metal contact with the face of the female end.3. Tighten slightly with a wrench.

Locknut

Backupwasher

Page 15: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

16 HYDRAULIC SWAGING UNITS

Multihead (MHSU)■ Preswages Swagelok ferrules onto tubing

■ Provides Swagelok tube fitting connections that are100 % gaugeable upon initial installation. Use MHSUgap inspection gauges supplied with the unit.

■ Places no initial strain on nut or fitting body threadsor on body seal surfaces

■ Must be used to install 1 1/4, 1 1/2, and 2 in. and28, 30, 32, 38, and 50 mm Swagelok tube fittings

■ Is standard with a tube marking feature to indicatewhen tube is properly bottomed in the unit

■ Is available with a support base

■ Fits neatly in arugged plasticcarrying case

■ Reduces assemblyinstallation time andoperator error.

See the HydraulicSwaging Units—Multihead (MHSU) catalog for moreinformation.

Air-Actuated (AHSU)■ Preswages Swagelok ferrules onto tubing

■ Provides Swagelok tube fitting connections that are100 % gaugeable upon initial installation

■ Requires only one unit with interchangeable toolingto install 1/4 to 1/2 in. and 6 to 12 mm Swageloktube fitting ferrule sizes

■ Places no initial strain on nut or fitting body threadsor on body seal surfaces

■ Requires no threading of nut on or off the tooling

■ Fits neatly in a rugged plastic carrying case.

■ Reduces assembly installation time and operatorerror

See the HydraulicSwaging Unit—Air-Actuated (AHSU)catalog for moreinformation.

Page 16: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

17TUBING INSTALLATION

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1

1 1/4

1 1/2

1/2

23/32

3/4

13/16

7/8

15/16

1 3/16

1 1/4

1 5/16

1 1/2

2

2 13/32

TTube OD

1/16

L

Fractional, in.

2 3 1/4

Tubing InstallationProperly selected and handled tubing, when combinedwith the quality of Swagelok fittings, will give youleak-tight systems. Properly installed on such tubing,Swagelok fittings provide reliable service under a widevariety of fluid applications.

When installingfittings near tubebends, there mustbe a sufficientstraight lengthof tubing to allowthe tube to bebottomed in theSwagelok fitting(see table).

T

LSWAG

R

T Tube OD

L Straight tubelength required(see table)

R Radius oftubing bend

R

L

T

6

3 19

21

8 23

10 25

12 31

14

3215

16

18

2034

22

25 40

28

32 54

38 63

TTube OD L

Metric, mm

46

30 50

50 80

Page 17: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

18 TUBING DATA

Fractional Carbon Steel TubingAllowable working pressures are calculated from an Svalue of 15 700 psi (108 200 kPa) for ASTM A179tubing at –20 to 100°F (–28 to 37°C), as listed in ASMEB31.3. Multiply carbon steel rating by 0.75 for workingpressure in accordance with ASME B31.1.

Suggested Ordering InformationHigh-quality, soft annealed seamless carbon steelhydraulic tubing ASTM A179 or equivalent. Hardness72 HRB (130 HV) or less. Tubing to be free ofscratches, suitable for bending and flaring.

Gas ServiceGases (air, hydrogen, helium, nitrogen, etc.) have verysmall molecules that can escape through even the mostminute leak path. Some surface defects on the tubingcan provide such a leak path. As tube outside diameter(OD) increases, so does the likelihood of a scratch orother surface defect interfering with proper sealing.

The most successful connection for gas service willoccur if all installation instructions are carefully followedand the heavier wall thicknesses of tubing on theaccompanying tables are selected.

A heavy wall tube resists ferrule action more than a thinwall tube, allowing the ferrules to coin out minor surfaceimperfections. A thin wall tube offers less resistance toferrule action during installation, reducing the chance ofcoining out surface defects, such as scratches. Withinthe applicable suggested allowable working pressuretable, select a tube wall thickness whose workingpressure is outside of the shaded areas.

Page 18: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

19T

UB

ING

DA

TA

Tube Wall Thickness, in.0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 0.134 0.148 0.165 0.180 0.220

Working Pressure, psigNote: For gas service, select a tube wall thickness outside of the shaded area. (See Gas Service, page 18.)

8000 10 2005100 6 600 96003700 4 800 7000 9600

3 700 5500 75003 100 4500 62002 300 3200 4500 59001 800 2600 3500 4600 5300

2100 2900 3700 4300 51001800 2400 3200 3700 43001500 2100 2700 3200 3700 4100

1600 2100 2500 2900 3200 3600 4000 4600 50001800 2000 2400 2600 2900 3300 3700 4100 5100

1500 1700 1900 2100 2400 2700 3000 3700

TubeODin.1/83/161/45/163/81/25/83/47/81

1 1/41 1/2

2

SwagelokFittingSeries

200300400500600810

1010121014101610200024003200

Page 19: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

20 TUBING DATA

Metric Carbon Steel TubingAllowable working pressures are based on equationsfrom ASME B31.3 code for DIN 2391 tubing, using astress value of 1130 bar (16 400 psi) and a tensilestrength of 3400 bar (49 300 psi).

Suggested Ordering InformationHigh-quality, soft annealed carbon steel tubing toDIN 2391 or equivalent. Hardness 130 HV (72 HRB) orless. Tubing to be free of scratches, suitable forbending or flaring.

Page 20: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

21T

UB

ING

DA

TA

Tube Wall Thickness, mm0.8 1.0 1.2 1.5 1.8 2.0 2.2 2.5 2.8 3.0 3.5 4.0 4.5

Working Pressure, barNote: For gas service, select a tube wall thickness outside of the shaded area. (See Gas Service, page 18.)

630 790290 370 460 590

270 330 430210 260 330170 210 270 330 380 420150 180 230 280 320 350140 170 210 260 290 330130 150 200 240 270 300 350

140 170 210 240 270 310120 160 190 210 240 270 310110 140 170 190 210 240 280100 120 150 170 180 210 240 260

150 160 190 210 230 270140 150 170 200 210 250130 140 160 180 200 230 270

120 130 150 160 190 230 260

TubeODmm36810121415161820222528303238

SwagelokFittingSeries

3M06M08M0

10M012M014M015M016M018M020M022M025M028M030M032M038M0

Page 21: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

22 TUBING DATA

Fractional StainlessSteel Seamless TubingAllowable working pressures are calculated from an Svalue of 20 000 psi (137 800 kPa) for ASTM A269tubing at –20 to 100°F (–28 to 37°C), as listed inASME B31.3, except as noted. Multiply stainless steelrating by 0.94 for working pressure in accordance withASME B31.1.

For Welded TubingNOTE: For welded and drawn tubing, a derating factormust be applied for weld integrity.

■ For double welded tubing, multiply pressure ratingby 0.85

■ For single welded tubing, multiply pressure ratingby 0.80.

Suggested Ordering InformationFully annealed, high-quality (Type 304, 316, etc.seamless or welded and drawn) stainless steelhydraulic tubing ASTM A269 or A213, or equivalent.Hardness 80 HRB (180 HV) or less. Tubing to be freeof scratches, suitable for bending and flaring.

Note: Certain austenitic stainless tubing has anallowable ovality tolerance double the OD tolerance.Such oval tubing may not fit into Swagelok precisiontube fittings.

Page 22: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

23T

UB

ING

DA

TA

Tube Wall Thickness, in.0.010 0.012 0.014 0.016 0.020 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 0.134 0.156 0.188

Working Pressure, psigNote: For gas service, select a tube wall thickness outside of the shaded area. (See Gas Service, page 18.)

5600 6800 8100 9400 12 0008500 10 9005400 7 000 10 2004000 5 100 7 500 10 200➁

4 000 5 800 8 0003 300 4 800 6 500 7500➀➁

2 600 3 700 5 100 67002 900 4 000 5200 60002 400 3 300 4200 4900 58002 000 2 800 3600 4200 4800

2 400 3100 3600 4200 47002400 2800 3300 3600 4100 4900

2300 2700 3000 3400 4000 49002000 2200 2500 2900 3600

TubeODin.

1/161/83/161/45/163/81/25/83/47/81

1 1/41 1/2

2

SwagelokFittingSeries

100200300400500600810

1010121014101610200024003200

➀ Rating based on repeated pressure testing of the Swagelok tube fitting, with a 4:1 design factor based upon hydraulic fluid leakage.➁ For higher pressures and tubing with heavier wall thicknesses, see the Swagelok High-Pressure Fittings catalog.

Page 23: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

24 TUBING DATA

Metric StainlessSteel Seamless TubingAllowable working pressures are based on equationsfrom ASME B31.3 code for EN ISO 1127 tubing (D4,T4 tolerance 3 to 12 mm; D4, T3 tolerance, 14 to50 mm), using a stress value of 1370 bar (20 000 psi)and a tensile strength of 5170 bar (75 000 psi), exceptas noted. Multiply stainless steel rating by 0.94 forworking pressure in accordance with ASME B31.1.

For Welded TubingNote: For welded and drawn tubing, a derating factormust be applied for weld integrity.

■ For double-welded tubing, multiply pressure ratingby 0.85.

■ For single-welded tubing, multiply pressure ratingby 0.80.

Suggested Ordering InformationFully annealed, high-quality (Type 304, 316, etc.)stainless steel tubing to EN ISO 1127 or equivalent.Hardness 180 HV (80 HRB) or less. Tubing to be freeof scratches, suitable for bending or flaring.

Page 24: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

25T

UB

ING

DA

TA

Tube Wall Thickness, mm0.8 1.0 1.2 1.5 1.8 2.0 2.2 2.5 2.8 3.0 3.5 4.0 4.5 5.0

Working Pressure, barNote: For gas service, select a tube wall thickness outside of the shaded area. (See Gas Service, page 18.)

670310 420 540 710

310 390 520240 300 400 510 580200 250 330 410 470160 200 270 340 380 430150 190 250 310 360 400

170 230 290 330 370 400➀

150 200 260 290 320 370140 180 230 260 290 330 380120 160 200 230 260 300 340

180 200 230 260 290 320180 200 230 260 280 330170 180 210 240 260 310160 170 200 220 240 290 330

140 160 190 200 240 270 310150 180 210 240 270

TubeODmm3681012141516182022252830323850

SwagelokFittingSeries

3M06M08M0

10M012M014M015M016M018M020M022M025M028M030M032M038M050M0

➀R

ating based on repeated pressure testing of theS

wagelok tube fitting, w

ith a 4:1 design factor basedupon hydraulic fluid leakage.

Page 25: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

26T

UB

ING

DA

TA

Tube Wall Thickness, in.0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 0.134

Working Pressure, psigNote: For gas service, select a tube wall thickness outside of the shaded area.

(See Gas Service, page 18.)

2700 36001800 2300 34001300 1600 2500 3500

1300 1900 27001000 1600 2200800 1100 1600 2100

900 1200 1600 1900700 1000 1300 1500 1800600 800 1100 1300 1500500 700 900 1100 1300 1500

600 800 1000 1100 1300 1400

TubeODin.1/83/161/4

5/163/81/25/83/47/81

1 1/8

SwagelokFittingSeries

200300400500600810

10101210141016101810

Fractio

nal C

op

per Tu

bin

gA

llowable w

orking pressures are calculated from an S

value of 6000 psi (41 300 kPa) for A

ST

M B

75 tubing at–20 to 100°F

(–28 to 37°C), as listed in A

SM

EB

31.3.

Su

gg

ested O

rderin

g In

form

ation

Fractio

nal—

High-quality, soft annealed seam

lesscopper tubing A

ST

M B

75 or equivalent. Also soft

annealed(Tem

per 0) copper water tube, type K

ortype

Lto A

ST

M B

88.

Page 26: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

27ORDERING INFORMATION

Ordering InformationAdd the material designator to the basic ordering number.

Material Designator

Aluminum

Brass

Alloy 20

Alloy C-276

Alloy 600

Alloy 400/R-405

Nylon

Carbon steel

316 stainless steel

PTFE

Titanium

A

B

C20

HC

INC

M

NY

S

SS

T

TI

SAF 2507™ ➁

Example: SS-400-1-4

■ SAE/MS positionable fittings are available in carbonsteel and stainless steel only.

■ Minimum order quantities may apply to certainmaterials and configurations.

■ Heavy-wall fittings are available only in 316 stainlesssteel. See the Swagelok High-Pressure Fittingscatalog.

■ Contact your independent Swagelok sales and servicerepresentative for information about additional sizesand special alloys.

➀ For PFA tube fittings, see the Swagelok PFATube Fittings and PFA Tubing catalogs.

➁ For SAF 2507 super duplex fittings, see theSwagelok Gaugeable SAF 2507™ SuperDuplex Tube Fittings catalog.

PFA ➀

Page 27: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

28

TubeODin.

BasicOrderingNumber

1/16 -100-6

1/8 -200-6

-1210-6

-1010-6

-810-6

-600-6

-500-6

-400-6

-300-63/16

1/4

5/16

3/8

1/2

5/8

3/4

2

1 1/2

1 1/4

1

7/8 -1410-6

-1610-6

-2000-6

-2400-6

-3200-6

TubeODmm

BasicOrderingNumber

2 -2M0-6

-3M0-6

-4M0-6

-6M0-6

-8M0-6

-10M0-6

-12M0-6

-14M0-6

-15M0-6

-16M0-6

-18M0-6

-20M0-6

-22M0-6

-25M0-6

-28M0-6

-30M0-6

-32M0-6

-38M0-6

3

32

38

4

6

8

10

12

14

15

16

18

20

22

25

28

30

50 -50M0-6

STRAIGHT CONFIGURATIONS

Unions

Union

Page 28: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

29

TubeODin.

1/8

TubeODin.

BasicOrderingNumber

1/16 -200-6-1

3/16 1/161/8

-300-6-1-300-6-2

1/41/161/83/16

-400-6-1-400-6-2-400-6-3

-500-6-2-500-6-4

-600-6-1-600-6-2-600-6-4-600-6-5

-810-6-2-810-6-4-810-6-6

-1010-6-6-1010-6-8

-1210-6-4-1210-6-6-1210-6-8-1210-6-10

-1610-6-8-1610-6-12

5/16

3/8

1/2

5/8

3/4

1

1/81/4

1/161/81/45/16

1/81/43/8

3/81/2

1/43/81/25/8

1/23/4

STRAIGHT CONFIGURATIONS

Unions

ReducingUnion

Page 29: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

30

TubeODmm

TubeODmm

BasicOrderingNumber

3

10

2

6

8

-3M0-6-2M

234

-6M0-6-2M-6M0-6-3M-6M0-6-4M

6 -8M0-6-6M

68

-10M0-6-6M-10M0-6-8M

126810

-12M0-6-6M-12M0-6-8M-12M0-6-10M

16 1012

-16M0-6-10M-16M0-6-12M

18 12 -18M0-6-12M

25 1820

-25M0-6-18M-25M0-6-20M

30182025

-30M0-6-18M-30M0-6-20M-30M0-6-25M

32182025

-32M0-6-18M-32M0-6-20M-32M0-6-25M

38202530

-38M0-6-20M-38M0-6-25M-38M0-6-30M

STRAIGHT CONFIGURATIONS

Unions

ReducingUnion

Page 30: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

31

TubeODin.

BasicOrderingNumber

-2M0-6-2-2M0-6-4

1/81/41/81/81/41/81/45/16

-3M0-6-2-4M0-6-2-4M0-6-4-6M0-6-2-6M0-6-4-6M0-6-5

1/43/8

-8M0-6-4-8M0-6-6-10M0-6-2-10M0-6-4-10M0-6-5-10M0-6-6

1/81/45/163/85/163/81/21/2

5/8

-12M0-6-5-12M0-6-6-12M0-6-8-15M0-6-8

-16M0-6-10

-18M0-6-12-20M0-6-8-20M0-6-16-25M0-6-16

TubeODmm

2

3

4

6

8

10

12

15

16

18

20

25

3/41/211

STRAIGHT CONFIGURATIONS

Unions

ReducingUnion

Page 31: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

32

TubeODin.

1/16

BasicOrderingNumber

-100-61

1/8 -200-61

3/16 -300-61

-400-61

-500-61

-600-61

-810-61

-1010-61

-1210-61

1/4

5/16

3/8

1/2

5/8

3/4

1

1 1/4

1 1/2

2

-1610-61

-2000-61

-2400-61

-3200-61

STRAIGHT CONFIGURATIONS

TubeODmm

BasicOrderingNumber

3

8

4

6

-3M0-61

-4M0-61

-6M0-61

-8M0-61

10 -10M0-61

12 -12M0-61

14 -14M0-61

15 -15M0-61

16 -16M0-61

18 -18M0-61

20 -20M0-61

30 -30M0-61

-32M0-6132

38 -38M0-61

Unions

BulkheadUnion

Page 32: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

33

TubeODin.

1/4

BasicOrderingNumber

-400-61-2

3/8 -600-61-4

1/2 -810-61-4

TubeODin.

1/8

1/4

1/4

TubeODin.

1/16

BasicOrderingNumber

-100-6-2AN

1/8 -200-6-2AN-200-6-4AN

1/4 -400-6-4AN

-500-6-5AN

-600-6-4AN-600-6-6AN

-810-6-8AN

-1210-6-12AN

5/16

3/8

1/2

3/4

ANTubeFlareSizein.

1/8

1/81/4

1/4

5/16

1/43/8

1/2

3/4

1 1 -1610-6-16AN

AN Union

STRAIGHT CONFIGURATIONS

Unions

BulkheadReducingUnion

Page 33: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

34

TubeODin.

1/4

BasicOrderingNumber

-400-61-4AN

3/8 -600-61-6AN

1/2 -810-61-8AN

ANTubeFlareSizein.

1/4

3/8

1/2

3/4 -1210-61-12AN

-1610-61-16AN

3/4

1 1

TubeODin.

1/8

BasicOrderingNumber

-200-6-2W

1/4 -400-6-4W

3/8 -600-6-6W

1/2 -810-6-8W

3/4 -1210-6-12W

1 -1610-6-16W

SocketWeldSizein.

1/8

1/4

3/8

1/2

3/4

1

Tube SocketWeld Union

STRAIGHT CONFIGURATIONS

Unions

AN BulkheadUnion

Page 34: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

35

TubeODin.

NPTMale Pipe

Sizein.

BasicOrderingNumber

1/161/161/81/4

-100-1-1-100-1-2-100-1-4

1/8

1/161/81/43/81/2

-200-1-1-200-1-2-200-1-4-200-1-6-200-1-8

3/16 1/81/4

-300-1-2-300-1-4

5/161/81/43/8

-500-1-2-500-1-4-500-1-6

3/8

1/81/43/81/23/4

-600-1-2-600-1-4-600-1-6-600-1-8-600-1-12

1/2

1/81/43/81/23/41

-810-1-2-810-1-4-810-1-6-810-1-8-810-1-12-810-1-16

5/83/81/23/4

-1010-1-6-1010-1-8-1010-1-12

3/41/23/41

-1210-1-8-1210-1-12-1210-1-16

7/8 3/41

-1410-1-12-1410-1-16

11/23/41

-1610-1-8-1610-1-12-1610-1-16

1 1/4 11 1/4

-2000-1-16-2000-1-20

1 1/2 1 1/2 -2400-1-24

2 2 -3200-1-32

1/4

1/161/81/43/81/23/4

-400-1-1-400-1-2-400-1-4-400-1-6-400-1-8-400-1-12

MaleConnectors

NPT Thread

STRAIGHT CONFIGURATIONS

Page 35: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

36

MaleConnectors

NPT Thread

TubeODmm

NPTMale PipeSize, in.

BasicOrderingNumber

2 1/8 -2M0-1-2

3 1/81/4

-3M0-1-2-3M0-1-4

4 1/81/4

-4M0-1-2-4M0-1-4

6

1/81/43/81/2

-6M0-1-2-6M0-1-4-6M0-1-6-6M0-1-8

8

1/81/43/81/2

-8M0-1-2-8M0-1-4-8M0-1-6-8M0-1-8

10

1/81/43/81/23/4

-10M0-1-2-10M0-1-4-10M0-1-6-10M0-1-8-10M0-1-12

12

1/81/43/81/23/4

-12M0-1-2-12M0-1-4-12M0-1-6-12M0-1-8-12M0-1-12

141/43/81/2

-14M0-1-4-14M0-1-6-14M0-1-8

15 1/2 -15M0-1-8

163/81/23/4

-16M0-1-6-16M0-1-8-16M0-1-12

18 1/23/4

-18M0-1-8-18M0-1-12

20 1/23/4

-20M0-1-8-20M0-1-12

22 3/41

-22M0-1-12-22M0-1-16

251/23/41

-25M0-1-8-25M0-1-12-25M0-1-16

28 11 1/4

-28M0-1-16-28M0-1-20

30 1 1/4 -30M0-1-20

32 1 1/4 -32M0-1-20

38 1 1/2 -38M0-1-24

STRAIGHT CONFIGURATIONS

Page 36: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

37

TubeODin.

ISOMale PipeSize, in.

BasicOrderingNumber

1/8 1/81/4

-200-1-2RT-200-1-4RT

1/4

1/81/43/81/2

-400-1-2RT-400-1-4RT-400-1-6RT-400-1-8RT

5/16 1/81/4

-500-1-2RT-500-1-4RT

3/8

1/81/43/81/2

-600-1-2RT-600-1-4RT-600-1-6RT-600-1-8RT

1/2

1/43/81/23/4

-810-1-4RT-810-1-6RT-810-1-8RT-810-1-12RT

3/4 3/4 -1210-1-12RT

1 1 -1610-1-16RT

MaleConnectors

ISO TaperedThread (RT)

STRAIGHT CONFIGURATIONS

Page 37: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

38

MaleConnectors

ISO TaperedThread (RT) Tube

ODmm

ISOMale PipeSize, in.

BasicOrderingNumber

2

3

4

6

20

8

10

12

15

16

18

30

22

25

28

38

32

1/81/81/41/81/41/81/43/81/21/81/43/81/21/81/43/81/21/43/81/23/41/21/43/81/23/41/23/41/23/43/41

3/411

1 1/41 1/4

1 1/4

1 1/2

-2M0-1-2RT-3M0-1-2RT-3M0-1-4RT-4M0-1-2RT-4M0-1-4RT-6M0-1-2RT-6M0-1-4RT-6M0-1-6RT-6M0-1-8RT-8M0-1-2RT-8M0-1-4RT-8M0-1-6RT-8M0-1-8RT-10M0-1-2RT-10M0-1-4RT-10M0-1-6RT-10M0-1-8RT-12M0-1-4RT-12M0-1-6RT-12M0-1-8RT-12M0-1-12RT-15M0-1-8RT-16M0-1-4RT-16M0-1-6RT-16M0-1-8RT-16M0-1-12RT-18M0-1-8RT-18M0-1-12RT-20M0-1-8RT-20M0-1-12RT-22M0-1-12RT-22M0-1-16RT-25M0-1-12RT-25M0-1-16RT-28M0-1-16RT-28M0-1-20RT-30M0-1-20RT

-32M0-1-20RT

-38M0-1-24RT

STRAIGHT CONFIGURATIONS

Page 38: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

39

TubeODin.

ISOMale PipeSize, in.

BasicOrderingNumber

1/81/81/43/8

-200-1-2RS-200-1-4RS-200-1-6RS

1/4

1/81/43/81/2

-400-1-2RS-400-1-4RS-400-1-6RS-400-1-8RS

3/81/43/81/2

-600-1-4RS-600-1-6RS-600-1-8RS

1/21/43/81/2

-810-1-4RS-810-1-6RS-810-1-8RS

3/4 1/23/4

-1210-1-8RS-1210-1-12RS

1 1/21

-1610-1-8RS-1610-1-16RS

MaleConnectors

ISO ParallelThread (RS)

STRAIGHT CONFIGURATIONS

Page 39: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

40

MaleConnectors

ISO ParallelThread (RS) Tube

ODmm

ISOMale PipeSize, in.

BasicOrderingNumber

2 1/8 -2M0-1-2RS

3 1/81/4

-3M0-1-2RS-3M0-1-4RS

4 1/8 -4M0-1-2RS

6

1/81/43/81/2

-6M0-1-2RS-6M0-1-4RS-6M0-1-6RS-6M0-1-8RS

8

1/81/43/81/2

-8M0-1-2RS-8M0-1-4RS-8M0-1-6RS-8M0-1-8RS

101/43/81/2

-10M0-1-4RS-10M0-1-6RS-10M0-1-8RS

12

1/43/81/23/4

-12M0-1-4RS-12M0-1-6RS-12M0-1-8RS-12M0-1-12RS

16 3/81/2

-16M0-1-6RS-16M0-1-8RS

18 1/23/4

-18M0-1-8RS-18M0-1-12RS

20 1/23/4

-20M0-1-8RS-20M0-1-12RS

22 3/41

-22M0-1-12RS-22M0-1-16RS

25 3/41

-25M0-1-12RS-25M0-1-16RS

28 11 1/4

-28M0-1-16RS-28M0-1-20RS

30 1 1/4 -30M0-1-20RS

32 1 1/4 -32M0-1-20RS

38 1 1/2 -38M0-1-24RS

STRAIGHT CONFIGURATIONS

Page 40: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

41

TubeODin.

ISOMalePipe

Size, in.

BasicOrderingNumber

1/8 1/81/4

-200-1-2RP-200-1-4RP

1/4 1/81/4

-400-1-2RP-400-1-4RP

1/2 1/2 -810-1-8RP

MaleConnectors

ISO ParallelThread (RP)

STRAIGHT CONFIGURATIONS

TubeODmm

ISOMalePipe

Size, in.

BasicOrderingNumber

3 1/81/4

-3M0-1-2RP-3M0-1-4RP

4 1/8 -4M0-1-2RP

6

1/81/43/81/2

-6M0-1-2RP-6M0-1-4RP-6M0-1-6RP-6M0-1-8RP

8

1/81/43/81/2

-8M0-1-2RP-8M0-1-4RP-8M0-1-6RP-8M0-1-8RP

101/43/81/2

-10M0-1-4RP-10M0-1-6RP-10M0-1-8RP

12

1/43/81/23/4

-12M0-1-4RP-12M0-1-6RP-12M0-1-8RP-12M0-1-12RP

15 1/2 -15M0-1-8RP

16 3/81/2

-16M0-1-6RP-16M0-1-8RP

18 1/23/4

-18M0-1-8RP-18M0-1-12RP

20 1/23/4

-20M0-1-8RP-20M0-1-12RP

22 3/41

-22M0-1-12RP-22M0-1-16RP

25 3/41

-25M0-1-12RP-25M0-1-16RP

28 11 1/4

-28M0-1-16RP-28M0-1-20RP

30 1 1/4 -30M0-1-20RP3238

1 1/41 1/2

-32M0-1-20RP-38M0-1-24RP

Page 41: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

42

MaleConnectors

BulkheadNPT Tube

ODin.

NPTMale PipeSize, in.

BasicOrderingNumber

1/8 1/8 -200-11-2

1/4 1/81/4

-400-11-2-400-11-4

3/81/43/81/2

-600-11-4-600-11-6-600-11-8

1/2 3/81/2

-810-11-6-810-11-8

3/4 3/4 -1210-11-12

1 1 -1610-11-16

STRAIGHT CONFIGURATIONS

TubeODmm

NPTMale PipeSize, in.

BasicOrderingNumber

6

12 1/2

1/4 -6M0-11-4

-12M0-11-8

Page 42: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

43

TubeODin.

SAE/MSThread

Size

BasicOrderingNumber

1/85/16-247/16-209/16-18

-200-1-2ST-200-1-4ST-200-1-6ST

1/4

7/16-209/16-183/4-167/8-14

-400-1-4ST-400-1-6ST-400-1-8ST-400-1-10ST

5/16 1/2-20 -500-1-5ST

3/8

7/16-209/16-183/4-167/8-14

-600-1-4ST-600-1-6ST-600-1-8ST-600-1-10ST

1/2

9/16-183/4-167/8-14

1 1/16-12

-810-1-6ST-810-1-8ST-810-1-10ST-810-1-12ST

5/8 3/4-167/8-14

-1010-1-8ST-1010-1-10ST

3/4 3/4-161 1/16-12

-1210-1-8ST-1210-1-12ST

7/8 1 3/16-12 -1410-1-14ST

1 1 1/16-121 5/16-12

-1610-1-12ST-1610-1-16ST

1 1/4 1 5/8-12 -2000-1-20ST

1 1/2 1 7/8-12 -2400-1-24ST

2 2 1/2-12 -3200-1-32ST

MaleConnectors

SAE/MSStraight Thread

STRAIGHT CONFIGURATIONS

Page 43: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

44

O-Seal NPTThread

TubeODin.

NPTMale Pipe

Size

BasicOrderingNumber

1/8 1/8 -200-1-2-OR

1/4 1/81/4

-400-1-2-OR-400-1-4-OR

3/81/43/81/2

-600-1-4-OR-600-1-6-OR-600-1-8-OR

1/2 1/2 -810-1-8-OR

TubeODin.

SAE/MSMale

ThreadSize

BasicOrderingNumber

1/16 5/16-24 -100-1-OR

1/8 5/16-24 -200-1-OR

3/16 3/8-24 -300-1-OR

1/4 7/16-20 -400-1-OR

5/16 1/2-20 -500-1-OR

3/8 9/16-18 -600-1-OR

3/4 1 1/16-12 -1210-1-OR

1 1 5/16-12 -1610-1-OR

1/2 3/4-16 -810-1-OR

MaleConnectors

O-Seal SAE/MSStraight Thread

STRAIGHT CONFIGURATIONS

Page 44: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

45

MaleConnectors

Pipe Weld

TubeODin.

MalePipeWeldSize

BasicOrderingNumber

1/8 1/8 -200-1-2W

3/16 1/8 -300-1-2W

1/4 1/81/4

-400-1-2W-400-1-4W

5/16 1/81/4

-500-1-2W-500-1-4W

3/8

1/43/81/23/4

-600-1-4W-600-1-6W-600-1-8W-600-1-12W

1/23/81/23/4

-810-1-6W-810-1-8W-810-1-12W

5/8 1/2 -1010-1-8W

3/4 3/4 -1210-1-12W

1 1 -1610-1-16W

1 1/4 1 1/4 -2000-1-20W

1 1/2 1 1/2 -2400-1-24W

2 2 -3200-1-32W

STRAIGHT CONFIGURATIONS

Page 45: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

46

TubeODmm

MalePipe WeldSize, in.

BasicOrderingNumber

3 1/8 -3M0-1-2W

4 1/8 -4M0-1-2W

6 1/81/4

-6M0-1-2W-6M0-1-4W

81/81/41/2

-8M0-1-2W-8M0-1-4W-8M0-1-8W

101/43/81/2

-10M0-1-4W-10M0-1-6W-10M0-1-8W

121/43/81/2

-12M0-1-4W-12M0-1-6W-12M0-1-8W

14 3/8 -14M0-1-6W

15 1/2 -15M0-1-8W

16 1/2 -16M0-1-8W

18

30

1/2 -18M0-1-8W

1 1/4 -30M0-1-20W

32 1 1/4 -32M0-1-20W

38 1 1/2 -38M0-1-24W

MaleConnectors

Pipe Weld

STRAIGHT CONFIGURATIONS

Page 46: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

47

FemaleConnectors

NPT Thread

TubeODin.

NPTFemale

Pipe Sizein.

BasicOrderingNumber

1/16 1/161/8

-100-7-1-100-7-2

1/8 1/81/4

-200-7-2-200-7-4

3/16 1/8 -300-7-2

5/16 1/81/4

-500-7-2-500-7-4

3/8

1/81/43/81/23/4

-600-7-2-600-7-4-600-7-6-600-7-8-600-7-12

1/2

1/43/81/23/4

-810-7-4-810-7-6-810-7-8-810-7-12

5/83/81/23/4

-1010-7-6-1010-7-8-1010-7-12

3/4 1/23/4

-1210-7-8-1210-7-12

7/8 3/4 -1410-7-12

1 3/41

-1610-7-12-1610-7-16

1 1/4 1 1/4 -2000-7-20

1 1/2 1 1/2 -2400-7-24

2 2 -3200-7-32

1/4

1/81/43/81/2

-400-7-2-400-7-4-400-7-6-400-7-8

STRAIGHT CONFIGURATIONS

Page 47: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

48

TubeODmm

NPTFemale

Pipe Sizein.

BasicOrderingNumber

3 1/81/4

-3M0-7-2-3M0-7-4

4 1/8 -4M0-7-2

6

1/81/43/81/2

-6M0-7-2-6M0-7-4-6M0-7-6-6M0-7-8

8

1/81/43/81/2

-8M0-7-2-8M0-7-4-8M0-7-6-8M0-7-8

101/43/81/2

-10M0-7-4-10M0-7-6-10M0-7-8

121/43/81/2

-12M0-7-4-12M0-7-6-12M0-7-8

15 1/2 -15M0-7-8

-16M0-7-816 1/2

20 1/23/4

-20M0-7-8-20M0-7-12

22

25

3/41

3/41

-22M0-7-12-22M0-7-16

-25M0-7-12-25M0-7-16

FemaleConnectors

NPT Thread

STRAIGHT CONFIGURATIONS

Page 48: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

49

TubeODin.

ISOFemale

PipeSize

in.

BasicOrderingNumber

1/4

1/81/43/81/2

-400-7-2RT-400-7-4RT-400-7-6RT-400-7-8RT

3/81/43/81/2

-600-7-4RT-600-7-6RT-600-7-8RT

1/21/43/81/2

-810-7-4RT-810-7-6RT-810-7-8RT

FemaleConnectors

ISO TaperedThread (RT)

STRAIGHT CONFIGURATIONS

TubeODmm

ISOFemale

PipeSize

in.

BasicOrderingNumber

3 1/8 -3M0-7-2RT

6

1/81/43/81/2

-6M0-7-2RT-6M0-7-4RT-6M0-7-6RT-6M0-7-8RT

8

1/81/43/81/2

-8M0-7-2RT-8M0-7-4RT-8M0-7-6RT-8M0-7-8RT

10

1/81/43/81/2

-10M0-7-2RT-10M0-7-4RT-10M0-7-6RT-10M0-7-8RT

12

1/81/43/81/23/4

-12M0-7-2RT-12M0-7-4RT-12M0-7-6RT-12M0-7-8RT-12M0-7-12RT

15 3/81/2

-15M0-7-6RT-15M0-7-8RT

20 1/23/4

-20M0-7-8RT-20M0-7-12RT

22 3/41

-22M0-7-12RT-22M0-7-16RT

25 3/41

-25M0-7-12RT-25M0-7-16RT

Page 49: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

50

FemaleConnectors

ISO ParallelGauge Thread(RG) Tube

ODin.

ISOFemale

PipeSizein.

BasicOrderingNumber

1/41/43/81/2

-400-7-4RG-400-7-6RG-400-7-8RG

5/16 1/41/2

-500-7-4RG-500-7-8RG

3/81/43/81/2

-600-7-4RG-600-7-6RG-600-7-8RG

1/2 3/81/2

-810-7-6RG-810-7-8RG

STRAIGHT CONFIGURATIONS

TubeODmm

ISOFemale

PipeSizein.

BasicOrderingNumber

3 1/4 -3M0-7-4RG

61/43/81/2

-6M0-7-4RG-6M0-7-6RG-6M0-7-8RG

81/43/81/2

-8M0-7-4RG-8M0-7-6RG-8M0-7-8RG

101/43/81/2

-10M0-7-4RG-10M0-7-6RG-10M0-7-8RG

121/43/81/2

-12M0-7-4RG-12M0-7-6RG-12M0-7-8RG

20 1/2 -20M0-7-8RG

22 1/2 -22M0-7-8RG

Page 50: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

51

TubeODin.

NPTFemale

Pipe Sizein.

BasicOrderingNumber

1/8 1/8 -200-71-2

1/4 1/81/4

-400-71-2-400-71-4

3/8 1/4 -600-71-4

1/2 3/81/2

-810-71-6-810-71-8

FemaleConnectors

Bulkhead NPT

STRAIGHT CONFIGURATIONS

TubeODmm

NPTFemale

Pipe Sizein.

BasicOrderingNumber

6

12

1/4

1/2

-6M0-71-4

-12M0-71-8

Page 51: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

52

TTubeODin.

TxTubeODin.

BasicOrderingNumber

1/16 1/81/4

-100-R-2-100-R-4

1/8

1/161/83/161/43/81/2

-200-R-1-200-R-2-200-R-3-200-R-4-200-R-6-200-R-8

3/16 1/81/4

-300-R-2-300-R-4

5/16 3/81/2

-500-R-6-500-R-8

3/8

1/43/81/25/83/4

-600-R-4-600-R-6-600-R-8-600-R-10-600-R-12

1/2

1/43/81/25/83/41

-810-R-4-810-R-6-810-R-8-810-R-10-810-R-12-810-R-16

5/83/47/81

-1010-R-12-1010-R-14-1010-R-16

3/4 1/21

-1210-R-8-1210-R-16

1/4

1/83/161/45/163/81/25/83/4

-400-R-2-400-R-3-400-R-4-400-R-5-400-R-6-400-R-8-400-R-10-400-R-12

11 1/41 1/2

2

-1610-R-20-1610-R-24-1610-R-32

1 1/4 1 1/22

-2000-R-24-2000-R-32

1 1/2 2 -2400-R-32

STRAIGHT CONFIGURATIONS

Over 1 in. reducers arefurnished with nut andpreswaged ferrules.Wrench tighten 1/2 turnpast finger-tight.

T TxReducers

Reducer

Page 52: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

53

TTubeODmm

TxTubeODin.

BasicOrderingNumber

2 1/8 -2M0-R-2

3 1/81/4

-3M0-R-2-3M0-R-4

8 3/81/2

-8M0-R-6-8M0-R-8

10 3/81/2

-10M0-R-6-10M0-R-8

12 1/23/4

-12M0-R-8-12M0-R-12

25 1 -25M0-R-16

4 1/4 -4M0-R-4

1/81/45/163/81/2

6

-6M0-R-2-6M0-R-4-6M0-R-5-6M0-R-6-6M0-R-8

18 3/41

-18M0-R-12-18M0-R-16

STRAIGHT CONFIGURATIONS

T TxReducers

Reducer

Page 53: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

54

TTubeODmm

TxTubeODmm

BasicOrderingNumber

2 3 -2M0-R-3M

34610

-3M0-R-4M-3M0-R-6M-3M0-R-10M

4 6 -4M0-R-6M

10

68121518

-10M0-R-6M-10M0-R-8M-10M0-R-12M-10M0-R-15M-10M0-R-18M

12

68101618202225

-12M0-R-6M-12M0-R-8M-12M0-R-10M-12M0-R-16M-12M0-R-18M-12M0-R-20M-12M0-R-22M-12M0-R-25M

16 12 -16M0-R-12M

18

1216202225

-18M0-R-12M-18M0-R-16M-18M0-R-20M-18M0-R-22M-18M0-R-25M

22182025

-22M0-R-18M-22M0-R-20M-22M0-R-25M

25 1820

-25M0-R-18M-25M0-R-20M

6

8

38101218

-6M0-R-3M-6M0-R-8M-6M0-R-10M-6M0-R-12M-6M0-R-18M-8M0-R-6M-8M0-R-10M-8M0-R-12M

61012

20

16182225

-20M0-R-16M-20M0-R-18M-20M0-R-22M-20M0-R-25M

STRAIGHT CONFIGURATIONS

T TxReducers

Reducer

Page 54: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

55

Reducers

LongReducer

BulkheadReducer

TTubeODin.

TxTubeODin.

BasicOrderingNumber

3/8 1/2 -600-RF-8

TubeODin.

BasicOrderingNumber

1/8 -200-R1-2

1/4 -400-R1-4

3/8 -600-R1-6

1/2 -810-R1-8

5/8 -1010-R1-10

3/4 -1210-R1-12

1 -1610-R1-16

STRAIGHT CONFIGURATIONS

Use only longreducers in femaleSwagelok fittings.

T Tx

T Tx

Page 55: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

56

PortConnectors

Port ConnectorTubeODin.

BasicOrderingNumber

1/16 -101-PC

1/8 -201-PC

1/4 -401-PC

5/16 -501-PC

3/8 -601-PC

1/2 -811-PC

5/8 -1011-PC

3/4 -1211-PC

1 -1611-PC1 1/4 -2000-PC

1 1/2 -2400-PC

2 -3200-PC

STRAIGHT CONFIGURATIONS

Over 1 in. and over25 mm port connectorsfurnished with nut andpreswaged ferrules.

TubeODmm

BasicOrderingNumber

3

6

8

10

12

15

16

18

20

25

28

30

32

38

-3M1-PC

-6M1-PC

-8M1-PC

-10M1-PC

-12M1-PC

-15M1-PC

-16M1-PC

-18M1-PC

-20M1-PC

-25M1-PC

-28M0-PC

-30M0-PC

-32M0-PC

-38M0-PC

Page 56: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

57

PortConnectors

ReducingPort Connector T

TubeODin.

BasicOrderingNumber

1/8 -201-PC-1

1/4 -401-PC-1-401-PC-2

3/8 -601-PC-2-601-PC-4

1/2 -811-PC-4-811-PC-6

3/4 -1211-PC-8

1 -1611-PC-8-1611-PC-12

TxTubeODin.

1/161/161/8

1/81/4

1/43/8

1/2

1/23/4

STRAIGHT CONFIGURATIONS

TTubeODmm

BasicOrderingNumber

TxTubeODmm

6

8

10

12

3

6

68

6810

-6M1-PC-3M

-8M1-PC-6M

-10M1-PC-6M-10M1-PC-8M

-12M1-PC-6M-12M1-PC-8M-12M1-PC-10M

16

28

32

38 25

25

25

12 -16M1-PC-12M

-28M1-PC-25M

-32M1-PC-25M

-38M1-PC-25M

T Tx

Page 57: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

58

Capsand Plugs

Cap

TubeODin.

BasicOrderingNumber

1/16 -100-C

1/8

3/16

1/4

5/16

3/8

1/2

5/8

-200-C

-300-C

-400-C

-500-C

-600-C

-810-C

-1010-C

3/4

7/8

1

-1210-C

-1410-C

-1610-C

1 1/4

1 1/2

2

-2000-C

-2400-C

-3200-C

STRAIGHT CONFIGURATIONS

TubeODmm

BasicOrderingNumber

2

3

4

6

8

10

12

14

15

16

18

20

22

25

28

30

32

38 -38M0-C

-32M0-C

-30M0-C

-28M0-C

-25M0-C

-22M0-C

-20M0-C

-18M0-C

-16M0-C

-15M0-C

-14M0-C

-12M0-C

-10M0-C

-8M0-C

-6M0-C

-4M0-C

-3M0-C

-2M0-C

Page 58: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

59

Capsand Plugs

Plug

TubeODin.

BasicOrderingNumber

1/16 -100-P

1/8

3/16

1/4

5/16

3/8

1/2

-200-P

-300-P

-400-P

-500-P

-600-P

-810-P5/8

3/4

7/8

-1010-P

-1210-P

-1410-P1

1 1/4

1 1/2

-1610-P

-2000-P

-2400-P2 -3200-P

STRAIGHT CONFIGURATIONS

TubeODmm

BasicOrderingNumber

2

4

3

6

8

10

12

15

16

18

20

22

25

28

30

32

38

-2M0-P

-3M0-P

-4M0-P

-6M0-P

-8M0-P

-10M0-P

-12M0-P

-15M0-P

-16M0-P

-18M0-P

-20M0-P

-22M0-P

-25M0-P

-28M0-P

-30M0-P

-32M0-P

-38M0-P

Page 59: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

60

Vent ProtectorsSwagelok vent protectors, more commonly known asmud dauber fittings, protect open ends of instruments,tubing, outlet vents, and bleed-off lines.

The mesh wire screen prevents foreign objects, suchas mud dauber insects, from entering and cloggingsystems and causing damage.

Vent protectors are available in stainless steel and brass.To order brass, replace SS with B in the ordering number.

Example: B-MD-4

NPTMale Pipe

Sizein.

OrderingNumber

1/4 SS-MD-4

3/8

1/2

3/4

SS-MD-6

SS-MD-8

SS-MD-12

40 mesh 300 seriesstainless steel wirescreen assembly

STRAIGHT CONFIGURATIONS

NPT male pipethread

Page 60: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

61

ANSI FlangesANSI flanges are compatible with ASME B16.5.

EN FlangesEN flanges are compatible with EN 1092-1.

Flanges■ Swagelok tube fitting ends for

use with 1/4, 3/8, and 1/2 in.; 10and 12 mm OD tubing

■ Integrally machined forging; noweld seams or joints

■ 316/DIN material number 1.4401stainless steel (TÜV approved)

STRAIGHT CONFIGURATIONS

TubeOD in.

ANSIFlange

NPS ClassOrdering Number

Raised Face Flange

SS-400-F8-150

SS-600-F8-300

SS-810-F8-150

1/4 1/2 150

1/2

1/2

1

2

1

1

2

3/8

1

1 1/2

SS-810-F16-150

SS-810-F32-150

SS-1210-F16-150

SS-1610-F16-150

SS-2400-F32-150

2 2 SS-3200-F32-150

150

300

1/2

3/4

TubeOD mm

ENFlange

Size, DNOrdering Number

Raised Face Flange

SS-6M0-F25E-40-B1

SS-12M0-F15E-40-B1

SS-12M0-F25E-40-B1

6 25

15

25

50

15

25

25

50

12

18

25

38

SS-12M0-F50E-40-B1

SS-18M0-F15E-40-B1

SS-18M0-F25E-40-B1

SS-25M0-F25E-40-B1

SS-38M0-F50E-40-B1

50 50 SS-50M0-F50E-40-B1

Page 61: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

62

JIS FlangesJIS flanges are compatible with JIS B 2238.

Flanges

DIN FlangesDIN flanges are compatible with DIN 2501.

STRAIGHT CONFIGURATIONS

TubeODmm

DINFlange

Size, DNOrdering Number

Raised Face Flange

SS-6M0-F25M-40-C

SS-12M0-F15M-40-C

SS-12M0-F25M-40-C

6 25

15

25

50

15

25

25

50

12

18

25

38

SS-12M0-F50M-40-C

SS-18M0-F15M-40-C

SS-18M0-F25M-40-C

SS-25M0-F25M-40-C

SS-38M0-F50M-40-C

50 50 SS-50M0-F50M-40-C

TubeOD

JISFlange

Size, DNOrdering Number

Raised Face Flange

SS-600-F15A-10K-RF

SS-810-F15A-10K-RF

25

50

15

15

3/8

12

18

SS-1210-F15A-10K-RF

SS-1610-F25A-10K-RF

SS-3200-F50A-10K-RF

SS-12M0-F15A-10K-RF

SS-18M0-F15A-10K-RF

25 25 SS-25M0-F25A-10K-RF

1/2

2

3/4

1

1/4

15

Dimensions, in.

Dimensions, mm

SS-400-F15A-10K-RF

Page 62: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

63

TubeODin.

BasicOrderingNumber

1/16 -100-9

1/8 -200-9

-1210-9

-1010-9

-810-9

-600-9

-500-9

-400-9

-300-93/16

1/4

5/16

3/8

1/2

5/8

3/4

2

1 1/2

1 1/4

1

7/8 -1410-9

-1610-9

-2000-9

-2400-9

-3200-9

Unions

Union Elbow

ELBOWS—90° CONFIGURATIONS

TubeODmm

BasicOrderingNumber

3

4

6

8

10

12

14

15

16

18

20

22

25

28

30

32

38

-3M0-9

-4M0-9

-6M0-9

-8M0-9

-10M0-9

-12M0-9

-14M0-9

-15M0-9

-16M0-9

-18M0-9

-20M0-9

-22M0-9

-25M0-9

-28M0-9

-30M0-9

-32M0-9

-38M0-9

50 -50M0-9

Page 63: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

64 ELBOWS—90° CONFIGURATIONS

Unions

Tube SocketWeld Union Tube

ODin.

1/4

BasicOrderingNumber

-400-9-4W

3/8 -600-9-6W

1/2 -810-9-8W

3/4 -1210-9-12W

-1610-9-16W1

SocketWeldSizein.

1/4

3/8

1/2

3/4

1

Page 64: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

65ELBOWS—90° CONFIGURATIONS

TubeODin.

1/16

BasicOrderingNumber

-100-2-1-100-2-2

1/8-200-2-1-200-2-2-200-2-4

3/16 -300-2-2-300-2-4

-400-2-1-400-2-2-400-2-4-400-2-6-400-2-8

-500-2-2-500-2-4-500-2-6

-600-2-2-600-2-4-600-2-6-600-2-8-600-2-12

-810-2-4-810-2-6-810-2-8-810-2-12

-1010-2-6-1010-2-8-1010-2-12

-1210-2-8-1210-2-12

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1

1 1/4

1 1/2

-1410-2-12

-1610-2-12-1610-2-16

-2000-2-20

-2400-2-24

NPTMale Pipe

Sizein.

1/161/8

1/161/81/4

1/81/4

1/161/81/43/81/2

1/81/43/8

1/81/43/81/23/4

1/43/81/23/4

3/81/23/4

1/23/4

3/4

3/41

1 1/4

1 1/2

2 2 -3200-2-32

MaleConnectors

NPT Thread

Page 65: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

66

Male Connectors

NPT Thread

ELBOWS—90° CONFIGURATIONS

TubeODmm

BasicOrderingNumber

3

8

4

6

-3M0-2-2-3M0-2-4-4M0-2-2-4M0-2-4

-6M0-2-2-6M0-2-4-6M0-2-6-6M0-2-8

-8M0-2-2-8M0-2-4-8M0-2-6-8M0-2-8

10

-10M0-2-2-10M0-2-4-10M0-2-6-10M0-2-8

12

-12M0-2-4-12M0-2-6-12M0-2-8-12M0-2-12

15 -15M0-2-8

16-16M0-2-6-16M0-2-8-16M0-2-12

18 -18M0-2-8-18M0-2-12

20 -20M0-2-8-20M0-2-12

22 -22M0-2-12-22M0-2-16

-25M0-2-12-25M0-2-1625

30 -30M0-2-20

NPTMale Pipe

Sizein.

1/81/41/81/4

1/81/43/81/2

1/81/43/81/2

1/81/43/81/2

1/43/81/23/4

1/2

3/81/23/4

1/23/4

1/23/4

3/41

3/41

1 1/4

32

38

1 1/4

1 1/2

-32M0-2-20

-38M0-2-24

Page 66: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

67ELBOWS—90° CONFIGURATIONS

TubeODin.

1/4

BasicOrderingNumber

-400-2-2RT-400-2-4RT-400-2-6RT-400-2-8RT

5/16 -500-2-4RT-600-2-4RT-600-2-6RT3/8

ISOMale PipeSize, in.

1/81/43/81/21/41/43/8

Male Connectors

ISO TaperedThread

TubeODmm

BasicOrderingNumber

-3M0-2-2RT-3M0-2-4RT-4M0-2-2RT-4M0-2-4RT

3

4

ISOMale PipeSize, in.

1/81/41/81/4

6

1/81/43/81/2

-6M0-2-2RT-6M0-2-4RT-6M0-2-6RT-6M0-2-8RT

8

1/81/43/81/2

-8M0-2-2RT-8M0-2-4RT-8M0-2-6RT-8M0-2-8RT

101/43/81/2

-10M0-2-4RT-10M0-2-6RT-10M0-2-8RT

12

1/81/43/81/23/4

-12M0-2-2RT-12M0-2-4RT-12M0-2-6RT-12M0-2-8RT-12M0-2-12RT

16 3/81/2

-16M0-2-6RT-16M0-2-8RT

18 1/23/4

-18M0-2-8RT-18M0-2-12RT

20 1/23/4

-20M0-2-8RT-20M0-2-12RT

22 3/41

-22M0-2-12RT-22M0-2-16RT

25 3/41

-25M0-2-12RT-25M0-2-16RT

Page 67: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

68 ELBOWS—90° CONFIGURATIONS

MaleConnectors

Positionable—SAE/MSStraight Thread

TubeODin.

1/4

BasicOrderingNumber

-400-2-4ST-400-2-6ST

5/16 -500-2-5ST

3/8 -600-2-6ST-600-2-8ST

SAE/MSThread

Sizein.

7/16-209/16-18

1/2-20

9/16-183/4-16

1/2 -810-2-8ST

-1010-2-10ST

3/4-16

5/8 7/8-14

3/4 1 1/16-12 -1210-2-12ST

7/8 1 3/16-12 -1410-2-14ST

1 1 5/16-12 -1610-2-16ST

1 1/4 1 5/8-12 -2000-2-20ST

1 1/2 1 7/8-12 -2400-2-24ST

2 2 1/2-12 -3200-2-32ST

Page 68: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

69ELBOWS—90° CONFIGURATIONS

TubeODin.

1/4

BasicOrderingNumber

-400-2-2PR-400-2-4PR

3/8 -600-2-4PR-600-2-6PR

1/2-810-2-4PR-810-2-6PR-810-2-8PR

5/8 -1010-2-8PR

3/4 -1210-2-8PR-1210-2-12PR

1 -1610-2-12PR-1610-2-16PR

ISOMale Pipe

Sizein.

1/81/4

1/43/8

1/43/81/2

1/2

1/23/4

3/41

MaleConnectors

Positionable—ISO ParallelThread

TubeODmm

BasicOrderingNumber

ISOMale Pipe

Sizein.

6 1/81/4

-6M0-2-2PR-6M0-2-4PR

8 1/81/4

-8M0-2-2PR-8M0-2-4PR

10 1/43/8

-10M0-2-4PR-10M0-2-6PR

12

1/43/81/23/4

-12M0-2-4PR-12M0-2-6PR-12M0-2-8PR-12M0-2-12PR

Page 69: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

70 ELBOWS—90° CONFIGURATIONS

MaleConnectors

Pipe Weld

TubeODin.

1/4

BasicOrderingNumber

-400-2-2W-400-2-4W

3/8 -600-2-4W

1/2 -810-2-8W

3/4 -1210-2-12W

MalePipe Weld

Sizein.

1/81/4

1/4

1/2

3/4

Page 70: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

71ELBOWS—90° CONFIGURATIONS

TubeODin.

1/8

BasicOrderingNumber

-200-8-2-200-8-4

3/16 -300-8-2

1/4

-400-8-2-400-8-4-400-8-6-400-8-8

5/16 -500-8-2-500-8-4

3/8

-600-8-2-600-8-4-600-8-6-600-8-8

1/2-810-8-4-810-8-6-810-8-8

NPTFemale

PipeSize, in.

1/81/41/81/81/43/81/21/81/41/81/43/81/21/43/81/2

5/8 3/81/2

-1010-8-6-1010-8-8

3/4 1/23/4

-1210-8-8-1210-8-12

7/8 3/4 -1410-8-12

1 3/41

-1610-8-12-1610-8-16

FemaleConnectors

NPT Thread

TubeODmm

BasicOrderingNumber

NPTFemale

PipeSize, in.

61/81/41/2

-6M0-8-2-6M0-8-4-6M0-8-8

8 1/4 -8M0-8-4

10 1/81/4

-10M0-8-2-10M0-8-4

12 1/41/2

-12M0-8-4-12M0-8-8

16 1/2 -16M0-8-8

Page 71: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

72 ELBOWS—45° CONFIGURATIONS

TubeODin.

1/4

BasicOrderingNumber

-400-5-2-400-5-4

3/8-600-5-2-600-5-4-600-5-6

1/2 -810-5-6-810-5-8

3/4 -1210-5-12

-1610-5-161

NPTMale Pipe

Sizein.

1/81/4

1/81/43/8

3/81/2

3/4

1

MaleConnectors

NPT Thread

Positionable—SAE/MSStraightThread

TubeODin.

1/4

BasicOrderingNumber

-400-5-4ST

3/8 -600-5-6ST

1/2 -810-5-8ST

3/4 -1210-5-12ST

-1610-5-16ST1

SAE/MSThread

Sizein.

7/16-20

9/16-18

3/4-16

1 1/16-12

1 5/16-12

Page 72: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

73TEES

TubeODin.

BasicOrderingNumber

1/16 -100-3

1/8 -200-3

-1210-3

-1010-3

-810-3

-600-3

-500-3

-400-3

-300-33/16

1/4

5/16

3/8

1/2

5/8

3/4

2

1 1/2

1 1/4

1

7/8 -1410-3

-1610-3

-2000-3

-2400-3

-3200-3

Unions

Union

TubeODmm

BasicOrderingNumber

3

4

6

8

10

12

14

15

16

18

20

22

25

28

30

32

38

-3M0-3

-4M0-3

-6M0-3

-8M0-3

-10M0-3

-12M0-3

-14M0-3

-15M0-3

-16M0-3

-18M0-3

-20M0-3

-22M0-3

-25M0-3

-28M0-3

-30M0-3

-32M0-3

-38M0-3

2 -2M0-3

50 -50M0-3

Page 73: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

74 TEES

TTubeODin.

3/8

BasicOrderingNumber

-600-3-4-6

TxTubeODin.

1/4

Unions

ReducingUnion

TTubeODin.

3/8

BasicOrderingNumber

-600-3-6-4

1/2 -810-3-8-4-810-3-8-6

5/8 -1010-3-10-6

-1210-3-12-6-1210-3-12-8

-1610-3-16-6-1610-3-16-8-1610-3-16-12

-2000-3-20-16

-2400-3-24-16

3/4

1

1 1/4

1 1/2

TxTubeODin.

1/4

1/43/8

3/8

3/81/2

3/81/23/4

1

1

2 1 -3200-3-32-16

T T

Tx

TxT

T

Page 74: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

75TEES

TTubeODin.

1/2

BasicOrderingNumber

-810-3-6-6

TxTubeODin.

3/8

5/8

3/4

-1010-3-6-6

-1210-3-6-6

3/8

3/8

TTubeODin.

5/8

BasicOrderingNumber

-1010-3-8-6

Tx1TubeODin.

3/8

3/4

1

-1210-3-8-6

-1610-3-12-6

TxTubeODin.

1/2

3/4

3/8

3/8

1/2

Unions

ReducingUnion

Tx

Tx

TxT

Tx1

T

Page 75: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

76 TEES

TubeODin.

1/8

BasicOrderingNumber

-200-3TTM-200-3-4TTM

3/16 -300-3TTM

-400-3TTM-400-3-4TTM1/4

NPTMale Pipe

Size, in.

1/81/4

1/8

1/81/4

5/16 1/8 -500-3TTM

3/8 1/43/8

-600-3TTM-600-3-6TTM

1/2 3/81/2

-810-3TTM-810-3-8TTM

5/8 1/2 -1010-3TTM

3/4 3/4 -1210-3TTM

MaleConnectors

Branch,NPT Thread

TubeODmm

BasicOrderingNumber

NPTMale Pipe

Size, in.

6 1/81/4

-6M0-3TTM-6M0-3-4TTM

8 1/81/4

-8M0-3TTM-8M0-3-4TTM

10 1/4 -10M0-3TTM

123/81/41/2

-12M0-3TTM-12M0-3-4TTM-12M0-3-8TTM

16 1/2 -16M0-3TTM

Page 76: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

77TEES

MaleConnectors

Run,NPT Thread Tube

ODin.

1/8

BasicOrderingNumber

-200-3TMT-200-3-4TMT

3/16 -300-3TMT

1/4 -400-3TMT-400-3-4TMT

NPTMale PipeSize, in.

1/81/4

1/8

1/81/4

5/16 -500-3TMT

-600-3TMT-600-3-6TMT

1/8

3/8 1/43/8

1/2 3/81/2

-810-3TMT-810-3-8TMT

5/8 1/2 -1010-3TMT

3/4 3/4 -1210-3TMT

TubeODmm

BasicOrderingNumber

NPTMale PipeSize, in.

6 1/81/4

-6M0-3TMT-6M0-3-4TMT

8

12

1/4

1/41/2

-8M0-3-4TMT

-12M0-3-4TMT-12M0-3-8TMT

16 1/2 -16M0-3TMT

Page 77: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

78 TEES

TubeODin.

1/4

BasicOrderingNumber

-400-3TST

3/8 -600-3TST

1/2 -810-3TST

3/4 -1210-3TST

1 -1610-3TST

1 1/4 -2000-3TST

SAE/MSMale Pipe

Size

7/16-20

9/16-18

3/4-16

1 1/16-12

1 5/16-12

1 5/8-12

1 1/2 1 7/8-12 -2400-3TST

2 2 1/2-12 -3200-3TST

MaleConnectors

PositionableRun, SAE/MSStraightThread

Page 78: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

79TEES

MaleConnectors

PositionableRun, ISOParallelThread

TubeODin.

1/4

BasicOrderingNumber

-400-3TRT-400-3-4TRT

3/8 -600-3TRT

1/2 -810-3TRT-810-3-8TRT

5/8 -1010-3TRT

3/4 -1210-3-8TRT-1210-3TRT

ISOMale PipeSize, in.

1/81/4

1/4

3/81/2

1/2

1/23/4

1 1 -1610-3TRT

TubeODmm

BasicOrderingNumber

ISOMale PipeSize, in.

6 1/81/4

-6M0-3TRT-6M0-3-4TRT

8 1/81/4

-8M0-3TRT-8M0-3-4TRT

10 1/4 -10M0-3TRT

12 3/81/2

-12M0-3TRT-12M0-3-8TRT

Page 79: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

80 TEES

MaleConnectors

PositionableBranch,SAE/MSStraightThread

TubeODin.

3/8

1/2

SAE/MSMale PipeSize, in.

9/16-18

3/4-16

1 1 5/16-12

1 1/4 1 5/8-12

1 1/2 1 7/8-12

2 2 1/2-12

1/4 7/16-20

3/4 1 1/16-12

BasicOrderingNumber

-400-3TTS

-600-3TTS

-810-3TTS

-1210-3TTS

-1610-3TTS

-2000-3TTS

-2400-3TTS

-3200-3TTS

Page 80: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

81TEES

MaleConnectors

PositionableBranch,ISO ParallelThread

TubeODin.

1/4

BasicOrderingNumber

-400-3TTR-400-3-4TTR

3/8 -600-3TTR

1/2 -810-3TTR-810-3-8TTR

5/8 -1010-3TTR

-1210-3-8TTR-1210-3TTR3/4

ISO MalePipe Size

in.

1/81/4

1/4

3/81/2

1/2

1/23/4

1 1 -1610-3TTR

TubeODmm

BasicOrderingNumber

ISO MalePipe Size

in.

6

8

1/81/4

-6M0-3TTR-6M0-3-4TTR

1/81/4

-8M0-3TTR-8M0-3-4TTR

10 1/4 -10M0-3TTR

12 3/81/2

-12M0-3TTR-12M0-3-8TTR

Page 81: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

82 TEES

FemaleConnectors

Run,NPT Thread

TubeODin.

1/8

BasicOrderingNumber

-200-3TFT

1/4 -400-3TFT-400-3-4TFT

3/8 -600-3TFT

1/2 -810-3TFT-810-3-8TFT

-1210-3TFT3/4

NPTFemale

PipeSizein.

1/8

1/81/4

1/4

3/81/2

3/4

1 3/41

-1610-3-12TFT-1610-3TFT

TubeODmm

BasicOrderingNumber

NPTFemale

PipeSizein.

6

8

1/81/4

-6M0-3TFT-6M0-3-4TFT

1/81/4

-8M0-3TFT-8M0-3-4TFT

10 1/4 -10M0-3TFT

12 1/43/8

-12M0-3-4TFT-12M0-3TFT

16 1/2 -16M0-3TFT

Page 82: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

83TEES

FemaleConnectors

Branch,NPT Thread

TubeODin.

1/8

BasicOrderingNumber

-200-3TTF

1/4 -400-3TTF-400-3-4TTF

3/8-600-3TTF-600-3-6TTF-600-3-8TTF

NPTFemale

PipeSizein.

1/8

1/81/4

1/43/81/2

5/8 1/2 -1010-3TTF

3/4 3/4 -1210-3TTF

1 3/41

-1610-3-12TTF-1610-3TTF

1/21/43/81/2

-810-3-4TTF-810-3TTF-810-3-8TTF

TubeODmm

BasicOrderingNumber

NPTFemale

PipeSizein.

-6M0-3TTF-6M0-3-4TTF6 1/8

1/4

8 1/81/4

10

12

1/4

1/43/8

-8M0-3TTF-8M0-3-4TTF

-10M0-3TTF

-12M0-3-4TTF-12M0-3TTF

16 1/2 -16M0-3TTF

Page 83: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

84 UNION CROSS

Tube Adapters

� Swagelok tube adapters are to be used ONLYin Swagelok tube fittings manufactured bySwagelok Company. Use in fittings made byother manufacturers may result in leakageor slippage.

Union Cross TubeODin.

BasicOrderingNumber

1/8 -200-4

1/4 -400-4

-1210-4

-810-4

-600-4

-500-45/16

3/8

1/2

3/4

1 -1610-4

TubeODmm

BasicOrderingNumber

6

8

10

12

16

18

20

25

-6M0-4

-8M0-4

-10M0-4

-12M0-4

-16M0-4

-18M0-4

-20M0-4

-25M0-4

3 -3M0-4

Page 84: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

85TUBE ADAPTERS

TubeODin.

NPTMale PipeSize, in.

BasicOrderingNumber

1/8 1/81/4

-2-TA-1-2-2-TA-1-4

3/16 1/81/4

-3-TA-1-2-3-TA-1-4

5/16 1/81/4

-5-TA-1-2-5-TA-1-4

3/8

1/81/43/81/2

-6-TA-1-2-6-TA-1-4-6-TA-1-6-6-TA-1-8

1/21/43/81/2

-8-TA-1-4-8-TA-1-6-8-TA-1-8

5/8 1/2 -10-TA-1-8

3/4 1/23/4

-12-TA-1-8-12-TA-1-12

1 3/41

-16-TA-1-12-16-TA-1-16

2 2 -32-TA-1-32

1/4

1/81/43/81/2

-4-TA-1-2-4-TA-1-4-4-TA-1-6-4-TA-1-8

1 1/4 1 1/4 -20-TA-1-201 1/2 1 1/2 -24-TA-1-24

MaleAdapters

NPT Thread

TubeODmm

NPTMale PipeSize, in.

BasicOrderingNumber

6

8

1/81/4

1/4

-6-MTA-1-2-6-MTA-1-4

-8-MTA-1-4

10-10-MTA-1-4-10-MTA-1-6-10-MTA-1-8 -12-MTA-1-4-12-MTA-1-8

-28-MTA-1-16-28-MTA-1-20

12

28 11 1/4

1/41/2

1/43/81/2

30

32

38

11 1/4

1 1/4

1 1/2

-30-MTA-1-16-30-MTA-1-20

-32-MTA-1-20

-38-MTA-1-24

Over 1 in. and over25 mm male adaptersfurnished with nut andpreswaged ferrules.

Page 85: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

86

TubeODin.

ISO MalePipe Size

in.

BasicOrderingNumber

1/8 1/81/4

-2-TA-1-2RT-2-TA-1-4RT

1/4 1/81/4

-4-TA-1-2RT-4-TA-1-4RT

3/81/43/81/2

-6-TA-1-4RT-6-TA-1-6RT-6-TA-1-8RT

1/21/43/81/2

-8-TA-1-4RT-8-TA-1-6RT-8-TA-1-8RT

3/4 3/4 -12-TA-1-12RT

1 1 -16-TA-1-16RT

MaleAdapters

ISO TaperedThread (RT)

TUBE ADAPTERS

TubeODmm

ISO MalePipe Size

in.

BasicOrderingNumber

6 1/81/4

-6-MTA-1-2RT-6-MTA-1-4RT

8 1/4 -8-MTA-1-4RT

10 1/43/8

-10-MTA-1-4RT-10-MTA-1-6RT

121/43/81/2

-12-MTA-1-4RT-12-MTA-1-6RT-12-MTA-1-8RT

28 11 1/4

-28-MTA-1-16RT-28-MTA-1-20RT

30 1 1/4 -30-MTA-1-20RT

32 1 1/4 -32-MTA-1-20RT

38 1 1/2 -38-MTA-1-24RT

Over 1 in. and over 25 mm maleadapters furnishedwith nut andpreswaged ferrules.

Page 86: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

87

MaleAdapters

ISO ParallelThread (RS)

TubeODin.

ISO MalePipe Size

in.

BasicOrderingNumber

1/8 1/81/4

-2-TA-1-2RS-2-TA-1-4RS

1/4 1/81/4

-4-TA-1-2RS-4-TA-1-4RS

3/8 1/43/8

-6-TA-1-4RS-6-TA-1-6RS

1/21/43/81/2

-8-TA-1-4RS-8-TA-1-6RS-8-TA-1-8RS

3/4 3/4 -12-TA-1-12RS

1 1 -16-TA-1-16RS

TUBE ADAPTERS

TubeODmm

ISO MalePipe Size

in.

BasicOrderingNumber

6

8

10

12

18

30

28

38

32

1/81/4

1/4

1/43/81/2

1/43/81/2

1/23/4

11 1/41 1/4

1 1/4

1 1/2

-6-MTA-1-2RS-6-MTA-1-4RS

-8-MTA-1-4RS

-10-MTA-1-4RS-10-MTA-1-6RS-10-MTA-1-8RS

-12-MTA-1-4RS-12-MTA-1-6RS-12-MTA-1-8RS

-18-MTA-1-8RS-18-MTA-1-12RS

-28-MTA-1-16RS-28-MTA-1-20RS

-30-MTA-1-20RS

-32-MTA-1-20RS

-38-MTA-1-24RS

Over 1 in. and over 25 mm maleadapters furnishedwith nut andpreswaged ferrules.

Page 87: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

88

TubeODin.

SAE/MSThread

Pipe Sizein.

BasicOrderingNumber

1/8 5/16-24 -2-TA-1-2ST

1/4 7/16-20 -4-TA-1-4ST

3/87/16-209/16-183/4-16

-6-TA-1-4ST-6-TA-1-6ST-6-TA-1-8ST

1/2 9/16-183/4-16

-8-TA-1-6ST-8-TA-1-8ST

5/8 7/8-14 -10-TA-1-10ST

3/4 1 1/16-12 -12-TA-1-12ST

1 1 5/16-12 -16-TA-1-16ST1 1/4

1 1/2

2

1 5/8-12 -20-TA-1-20ST

1 7/8-12

2 1/2-12

-24-TA-1-24ST

-32-TA-1-32ST

Over 1 in. and over 25 mm maleadapters furnishedwith nut andpreswaged ferrules.

TubeODmm

ISO MalePipe Size

in.

BasicOrderingNumber

28 11 1/4

-28-MTA-1-16RP-28-MTA-1-20RP

30 1 1/4 -30-MTA-1-20RP

32 1 1/4 -32-MTA-1-20RP

38 1 1/2 -38-MTA-1-24RP

MaleAdapters

ISO ParallelThread (RP)

Over 1 in. and over 25 mm maleadapters furnishedwith nut andpreswaged ferrules.

SAE/MSStraightThread

TUBE ADAPTERS

Page 88: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

89

TubeODin.

ThreadSizein.

BasicOrderingNumber

1/8 5/16-24 -2-TA-1-OR

3/16 3/8-24 -3-TA-1-OR

1/4 7/16-20 -4-TA-1-OR

5/16 1/2-20 -5-TA-1-OR

3/8 9/16-18 -6-TA-1-OR

1/2 3/4-16 -8-TA-1-OR

AN Thread

MaleAdapters

O-Seal SAE/MSStraight Thread

TubeODin.

ANTubeFlareSizein.

ThreadSize

1/2 1/2 3/4-16UNJF-3

3/4 3/4 1 1/16-12UNJ-3

1 1 1 5/16-12UNJ-3

1/4 1/4 7/16-20UNJF-3

BasicOrderingNumber

-4-TA-1-4AN

-8-TA-1-8AN

-12-TA-1-12AN

-16-TA-1-16AN

3/8 1/43/8

7/16-20UNJF-39/16-18UNJF-3

-6-TA-1-4AN-6-TA-1-6AN

TUBE ADAPTERS

Page 89: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

90

MaleAdapters

Pipe Weld

TubeODin.

MalePipeWeldSizein.

BasicOrderingNumber

1/4 1/4 -4-TA-1-4W

3/8 1/2 -6-TA-1-8W

1/2 1/23/4

-8-TA-1-8W-8-TA-1-12W

3/4 3/4 -12-TA-1-12W

TUBE ADAPTERS

Page 90: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

91

FemaleAdapters

NPT Thread

TubeODin.

NPTFemale

PipeSizein.

BasicOrderingNumber

1/8 1/81/4

-2-TA-7-2-2-TA-7-4

3/16 1/4 -3-TA-7-4

5/16 1/4 -5-TA-7-4

3/8

1/81/43/81/2

-6-TA-7-2-6-TA-7-4-6-TA-7-6-6-TA-7-8

1/21/43/81/2

-8-TA-7-4-8-TA-7-6-8-TA-7-8

5/8 1/2 -10-TA-7-8

3/41/23/41

-12-TA-7-8-12-TA-7-12-12-TA-7-16

1 3/41

-16-TA-7-12-16-TA-7-16

2 2 -32-TA-7-32

1/4

1/81/43/81/2

-4-TA-7-2-4-TA-7-4-4-TA-7-6-4-TA-7-8

1 1/4 1 1/4 -20-TA-7-20

1 1/2 1 1/2 -24-TA-7-24

Over 1 in. and over 25 mm femaleadapters furnishedwith nut andpreswaged ferrules.

TUBE ADAPTERS

TubeODmm

NPTFemale

PipeSizein.

BasicOrderingNumber

6

8

1/81/4

1/4

-6-MTA-7-2-6-MTA-7-4

-8-MTA-7-4

10-10-MTA-7-4-10-MTA-7-6-10-MTA-7-8

-12-MTA-7-4-12-MTA-7-812 1/4

1/2

1/43/81/2

Page 91: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

92

FemaleAdapters

ISO TaperedThread (RT)

TubeODin.

ISOFemale

PipeSizein.

BasicOrderingNumber

1/4 1/81/4

-4-TA-7-2RT-4-TA-7-4RT

3/8 1/43/8

-6-TA-7-4RT-6-TA-7-6RT

1/21/43/81/2

-8-TA-7-4RT-8-TA-7-6RT-8-TA-7-8RT

TUBE ADAPTERS

TubeODmm

ISOFemale

PipeSizein.

BasicOrderingNumber

6 1/8 -6-MTA-7-2RT

10 1/4 -10-MTA-7-4RT

Page 92: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

93TUBE ADAPTERS

TubeODin.

ISOFemale

PipeSizein.

BasicOrderingNumber

1/8 1/8 -2-TA-7-2RP

1/4 1/81/4

-4-TA-7-2RP-4-TA-7-4RP

3/8 1/43/8

-6-TA-7-4RP-6-TA-7-6RP

1/2 3/81/2

-8-TA-7-6RP-8-TA-7-8RP

FemaleAdapters

ISO ParallelThread (RP)

TubeODmm

ISOFemale

PipeSizein.

BasicOrderingNumber

6 1/81/4

-6-MTA-7-2RP-6-MTA-7-4RP

Page 93: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

94 TUBE ADAPTERS

TubeODin.

ISOFemale

PipeSizein.

BasicOrderingNumber

1/4 1/4 -4-TA-7-4RG

3/8 3/8 -6-TA-7-6RG

1/2 1/2 -8-TA-7-8RG

FemaleAdapters

ISO ParallelGaugeThread (RG)

TubeODmm

ISOFemale

PipeSizein.

BasicOrderingNumber

6

8

10

12

16

1/43/81/2

-6-MTA-7-4RG-6-MTA-7-6RG-6-MTA-7-8RG

1/41/2

-8-MTA-7-4RG-8-MTA-7-8RG

1/41/2

-10-MTA-7-4RG-10-MTA-7-8RG

1/41/2

-12-MTA-7-4RG-12-MTA-7-8RG

1/2 -16-MTA-7-8RG

18 1/2 -18-MTA-7-8RG

AN Thread

TubeODin.

ANTubeFlareSizein.

BasicOrderingNumber

3/8 3/8 -600-A-6ANF

1/2 1/2 -810-A-8ANF

1/8 1/81/4

-200-A-2ANF-200-A-4ANF

1/4 1/4 -400-A-4ANF

Page 94: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

95REPLACEMENT PARTS

Female

Nuts

TubeODin.

BasicOrderingNumber

1/16 -102-1

1/8 -202-1

-1212-1

-1012-1

-812-1

-602-1

-502-1

-402-1

-302-13/16

1/4

5/16

3/8

1/2

5/8

3/4

2

1 1/2

1 1/4

1

7/8 -1412-1

-1612-1

-2002-1

-2402-1

-3202-1

BasicOrderingNumber

-2M2-1

-3M2-1

-4M2-1

-6M2-1

-8M2-1

-10M2-1

-12M2-1

-15M2-1

-16M2-1

-18M2-1

-20M2-1

-25M2-1

TubeODmm

2

3

4

6

8

10

12

15

16

18

20

25

14 -14M2-1

22 -22M2-1

28

30

32

38

-28M2-1

-30M2-1

-32M2-1

-38M2-1

50 -50M2-1

Knurled FemaleKnurled nuts, designed for use with plasticferrules, are available in the same sizes asshown for Swagelok nuts.

To order, add K to the basic ordering number.

Example: B-402-1K

Page 95: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

96

TubeODin.

1/4

BasicOrderingNumber

-400-NFSET

3/8 -600-NFSET

1/2 -810-NFSET

REPLACEMENT PARTS

Male

Nuts

Nut-Ferrule SetNut-Ferrule Set contains one nut, one back ferrule, andone front ferrule.

To order a Nut-Ferrule Set, add a material designatorto the basic ordering number.

Example: SS-400-NFSET

TubeODin.

1/16

BasicOrderingNumber

-1F2-1GC

1/8 -2F2-1GC

1/4 -4F2-1

1/2 -8F2-1

TubeODmm

BasicOrderingNumber

10

12

-10MF2-1

-12MF2-1

Nut-Ferrule Package(50 sets per package)

Material Designator316 stainless steel SS

B

S

Brass

Steel

To order a Nut-Ferrule Package, contact yourindependent Swagelok representative.

Page 96: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

97REPLACEMENT PARTS

TubeODin.

1/16

BasicOrderingNumber

-100-SET

1/8 -200-SET

3/16 -300-SET

-400-SET

-500-SET

-600-SET

-810-SET

1/4

5/16

3/8

1/2

TubeODmm

BasicOrderingNumber

6

8

10

12

-6M0-SET

-8M0-SET

-10M0-SET

-12M0-SET

FerrulesFerrule SetFerrule Set contains one front ferrule and one backferrule.

To order a Ferrule Set, add a material designator tothe basic ordering number.

Example: SS-100-SETFerrule-Pak Package(100 sets per package)

Material Designator316 stainless steel SS

S

NY

Carbon steel

Nylon

Alloy 400/R-405

Aluminum

Brass

PTFE

M

A

B

T

To order a Ferrule-PakPackage, contact yourindependent Swagelokrepresentative.

Page 97: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

98 REPLACEMENT PARTS

Front

TubeODin.

1/16

BasicOrderingNumber-103-1

1/8 -203-1

3/16 -303-1

-403-1

-503-1

-603-1

-813-1

-1013-1

-1213-1

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1

1 1/4➀

1 1/2➀

2➀

-1413-1

-1613-1

-2003-1

-2403-1

-3203-1

TubeODmm

2

BasicOrderingNumber-2M3-1

3 -3M3-1

4 -4M3-1

-6M3-1

-8M3-1

-10M3-1

-12M3-1

-14M3-1

-15M3-1

6

8

10

12

14

15

16

18

20

22

25

-16M3-1

-18M3-1

-20M3-1

-22M3-1

-25M3-1

28➀

30➀

32➀

38➀

-28M3-1

-30M3-1

-32M3-1

-38M3-1

50➀ -50M3-1

Ferrules

➀ Over 1 in. and over25 mm stainless steelferrules are PFA coated.To order silver-platedfront ferrules, add -BL tothe basic orderingnumber.

Page 98: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

99REPLACEMENT PARTS

TubeODin.

1/16

BasicOrderingNumber-104-1

1/8 -204-1

3/16 -304-1

-404-1

-504-1

-604-1

-814-1

-1014-1

-1214-1

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1

1 1/4➀

1 1/2➀

2➀

-1414-1

-1614-1

-2004-1

-2404-1

-3204-1

TubeODmm

2

BasicOrderingNumber-2M4-1

3 -3M4-1

4 -4M4-1

-6M4-1

-8M4-1

-10M4-1

-12M4-1

-14M4-1

-15M4-1

6

8

10

12

14

15

16

18

20

22

25

-16M4-1

-18M4-1

-20M4-1

-22M4-1

-25M4-1

28➀

30➀

32➀

38➀ -38M4-1

-32M4-1

-30M4-1

-28M4-1

50➀ -50M4-1

Back

Ferrules

➀ Over 1 in. and over25 mm stainless steelferrules are PFA coated.To order silver-platedfront ferrules, add -WC tothe basic orderingnumber.

Page 99: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

100

The RS fitting steel gasketprovides a seal with maleBSP/ISO parallel threads. Thegasket consists of a fluorocarbonFKM or Buna inner ring bondedto a carbon steel outer ring. Toorder, add V for fluorocarbonFKM or B for Buna to the basicordering number. Example: S-2-RS-2BNote: For use only with RS end connections.

REPLACEMENT PARTS

BasicOrderingNumber

S-2-RS-2S-4-RS-2

S-6-RS-2

S-8-RS-2

S-12-RS-2

S-16-RS-2

ISOPipeSizein.

1/8

1/4

3/8

1/2

3/4

1

RS Fitting Steel Gaskets

RP Fitting Copper Gaskets

RG Fitting Copper Gaskets

OrderingNumber

CU-2-RP-2

CU-4-RP-2

CU-6-RP-2

CU-8-RP-2

CU-12-RP-2

CU-16-RP-2

ISOPipeSizein.

1/8

1/4

3/8

1/2

3/4

1

OrderingNumber

CU-4-RG-2

CU-6-RG-2

CU-8-RG-2

ISOPipeSizein.

1/4

3/8

1/2

ISO Parallel Gaskets

The RP fitting copper gasketprovides a seal with maleBSP/ISO parallel threads.Note: The RP gasket may beused with a Swagelok RS fitting.

The RG fitting copper gasketprovides a seal on pressuregauges equipped withBSP/ISO parallel male threads.

Page 100: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

101REPLACEMENT PARTS

O-Rings forPositionableFittings with ISOParallel Threads

O-Rings forFittings withSAE/MS StraightThreads

PortSize, in.

1/8

OrderingNumber

VI9-OR-0502➀

1/4 VI9-OR-0111

3/8 VI9-OR-0113

1/2 VI9-OR-0508➀

1 VI9-OR-0217

3/4 VI9-OR-0119

PortSize, in.

OrderingNumber

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1

1 1/4

1 1/2

2

VI9-OR-0902

VI9-OR-0903

VI9-OR-0904

VI9-OR-0905

VI9-OR-0906

VI9-OR-0908

VI9-OR-0910

VI9-OR-0912

VI9-OR-0914

VI9-OR-0916

VI9-OR-0920

VI9-OR-0924

VI9-OR-0932

➀ Not uniformO-ring sizes.

O-Rings

ThreadSize, in.

5/16-24

OrderingNumber

BN7-OR-0011

3/8-24 BN7-OR-0012

7/16-20 BN7-OR-0013

1/2-20 BN7-OR-0112

9/16-18

3/4-16

1 1/16-12

1 5/16-12

BN7-OR-0113

BN7-OR-0116

BN7-OR-0121

BN7-OR-0125

O-Rings forFittings withO-Seal StraightThreads

Page 101: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

102

Gap Inspection Gauges

For Installation Using a Wrench

REPLACEMENT PARTS

O-Rings forFittings withO-Seal PipeThreads

ThreadSize, in.

1/8

OrderingNumber

BN7-OR-0013

1/4 BN7-OR-0113

3/8 BN7-OR-0116

1/2 BN7-OR-0118

O-Rings

Fitting Size

Ordering Number

1/16 MS-IG-1F0

in. mm

1/8 2, 3 MS-IG-2F0

Male Nut

Female Nut1/16 — MS-IG-100

1/8 2, 3 MS-IG-200

3/16 4 MS-IG-300

1/4 6 MS-IG-400

1/4, 3/8, 1/2 6, 12 MS-IG-468

3/8 — MS-IG-600

— 10 MS-IG-10M0

1/2 12 MS-IG-810

5/8 14, 15, 16 MS-IG-1010

3/4 (SAF 2507) — MS-IG-2507-1210

7/8 20, 22 MS-IG-1410

1 25 MS-IG-1610

1/4, 1/2

5/16 MS-IG-5008

6, 8, 10, 12 MS-IG-612M

5/8 (SAF 2507)

3/4

18

MS-IG-2507-1010

MS-IG-1210

Page 102: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

103INSTALLATION INSTRUCTIONS

103

TOOLS AND ACCESSORIES

For Installation Using the AHSU

The AHSU cannot be used for SAF 2507 tubing.

Gap Inspection Gauges

Fitting Size

in. mm Ordering Number

Female Nut1/4, 3/8, 1/2 — MS-AHSU-IG-468

— 6, 8, 10, 12 MS-AHSU-IG-612M

Fitting Size

in. mm

28

30

1 1/4 —

32

38

1 1/2 —

— 50

2 —

1 25

Female Nut

7/8 20, 22

3/4 18

5/8 14, 15, 161/2 12

5/8(SAF 2507) —

3/4(SAF 2507)

Ordering Number

MS-MHSU-IG-810

MS-MHSU-IG-1010

MS-MHSU-IG-2507-1010

MS-MHSU-IG-1210

MS-MHSU-IG-2507-1210

MS-MHSU-IG-1410

MS-MHSU-IG-1610-1

MS-MHSU-IG-28M0-1

MS-MHSU-IG-30M0-1

MS-MHSU-IG-2000-1

MS-MHSU-IG-32M0-1

MS-MHSU-IG-38M0-1

MS-MHSU-IG-2400-1

MS-MHSU-IG-50M0-1

MS-MHSU-IG-3200-1

For Installation Using the MHSUThe MHSU cannot be used for SAF 2507 tubing1/2 in. and under.

For 5/8 and 3/4 in. SAF 2507 tubing, order the 1 in./25 mm and over unit and SAF 2507 tooling and gauges.

Page 103: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

104 TOOLS AND ACCESSORIES

“U” drivescrew

OrderingNumber

SS-102-61F

SS-202-61F

SS-302-61F

SS-402-61F

SS-502-61F

SS-602-61F

SS-812-61F

SS-1012-61F

SS-1212-61F

SS-1412-61F

SS-1612-61F

SS-8M2-61F

SS-10M2-61F

1/16

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

7/8

1

Fitting Size

in. mm

3, 4

6

12

15, 16

18

8

10

Bulkhead Retainer

Page 104: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

105TOOLS AND ACCESSORIES

PreswagingTool

Fractional TubeOD Size, in.

1/16

OrderingNumber

1/8

3/16

1/4

5/16

3/8

1/2

MS-ST-100

MS-ST-200

MS-ST-300

MS-ST-400

MS-ST-500

MS-ST-600

MS-ST-810

MS-ST-1010

MS-ST-1210

MS-ST-1410

MS-ST-1610

5/8

3/4

7/8

1

5/8 (SAF 2507) MS-ST-2507-1010

3/4 (SAF 2507) MS-ST-2507-1210

Female Nut

Male Nut

1/16 MS-ST-1F0

1/2 MS-ST-8F0

Metric TubeOD Size, mm

OrderingNumber

MS-ST-3M03

MS-ST-4M0

MS-ST-6M0

MS-ST-8M0

MS-ST-10M0

MS-ST-12M0

MS-ST-14M0

MS-ST-15M0

MS-ST-16M0

MS-ST-18M0

MS-ST-20M0

MS-ST-22M0

MS-ST-25M0

4

6

8

10

12

14

15

16

18

20

22

25

Male Nut

Page 105: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

106 TOOLS AND ACCESSORIES

TubeODin.

TubeIDin.

BasicOrderingNumber

3/16

1/4

-305-2

-405-2

-405-170

-405-3

-505-2

-505-3

-505-4

-605-3

-605-4

-815-4

-815-6

-1015-6

-1015-8

-1215-8

-1215-10

-1615-12

5/16

3/8

1/2

5/8

3/4

1

1/8

1/8

3/16

1/4

3/16

1/4

3/8

3/4

5/8

1/2

0.17

3/16

1/8

1/4

3/8

1/2

Insert for Tygon orSwagelok Vinyl Tubing

TubeODmm

TubeID

mm

BasicOrderingNumber

-6M5-4M

-8M5-6M

-10M5-8M

-12M5-8M

-12M5-10M

4

6

8

10

6

8

10

128

Page 106: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

Material

Tube Size

Fitting Series

Component

Type of Fitting

End Connection

107PART NUMBERING

Part Numbering

Fitting Part Number Example:

SS – 100 – 1 – 1

Material Designator

A = AluminumB = BrassC20 = Alloy 20HC = Alloy C-276INC = Alloy 600M = Alloy 400/R-405NY = NylonS = SteelSS = Stainless steelT = PTFETI = Titanium

Tube Size Designator

– 1 = 1/16 in. – 2M = 2 mm– 2 = 1/8 in. – 3M = 3 mm– 3 = 3/16 in. – 4M = 4 mm– 4 = 1/4 in. – 6M = 6 mm– 5 = 5/16 in. – 8M = 8 mm– 6 = 3/8 in. – 10M = 10 mm– 8 = 1/2 in. – 12M = 12 mm– 10 = 5/8 in. – 14M = 14 mm– 12 = 3/4 in. – 16M = 16 mm– 16 = 1 in. – 18M = 18 mm– 20 = 1 1/4 in. – 20M = 20 mm– 24 = 1 1/2 in. – 22M = 22 mm– 32 = 2 in. – 25M = 25 mm

– 28M = 28 mm– 32M = 32 mm– 38M = 38 mm– 50M = 50 mm

Page 107: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

108 PART NUMBERING

Fitting Series Designator

0 = Fractional 1/16 to 3/8 in. and 1 1/4 to 2 in.1 = Fractional 1/2 to 1 1/8 in.M = Millimeter tube sizeF = Female Swagelok tube fitting

Component Designator

0 = Fitting1 = Body2 – 1 = Nut3 – 1 = Front ferrule4 – 1 = Back ferrule

Type of Fitting Designator

– 1 – = Male connector– 2 – = Male elbow– 3 = Tee, union– 3TTF = Tee, female branch– 3TFT = Tee, female run– 3TTM = Tee, male branch– 3TMT = Tee, male run– 4 = Cross, union– 5 – = 45° male elbow– 6 = Union– 6 – = Reducing union– 7 – = Female connector– 8 – = Female elbow– 9 = Elbow, union– 9 – = Elbow, reducing union– 11– = Bulkhead male connector– 61 = Bulkhead union– 71 – = Bulkhead female connector– A – = Adapter– PC = Port connector– PC – = Reducing port connector– R1 – = Bulkhead reducer– C = Cap– P = Plug– R – = Reducer

Page 108: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

109

End Connection Designator

AN = 37° male AN flareANF = 37° female AN flareBT = Bored-through fittingGC = Gas chromatograph fittingF = Female threadK = Knurled nutKN = Knurled nut, nylon ferrulesLV = Low-volume chromatograph fittingM = Metric tube endingOR = O-seal connectionRP = ISO parallel pipe threadRG = ISO parallel pipe thread (gauge)RJ = ISO parallel pipe thread (Japanese gauge)RT = ISO tapered pipe threadST = Straight thread with O-ring (for SAE/MS)W = Male pipe weld/ tube socket weldZV = Zero-volume chromatograph fittingNumeral = Size of second end

Other Fluid System ComponentsAvailable from Swagelok Company

■ Additional fittings

■ Filters

■ Gauges/regulators

■ Hose

■ Plastic products

■ Quick-connects

■ Sample cylinders

■ Sanitary products

■ Surface-mount products

■ Tools and accessories

■ Tubing

■ Valves

■ Welding system

PART NUMBERING

Page 109: An Installer’s Pocket Guide for Swagelok Tube Fittings (MS ... guide.pdf · An Installer’s Pocket Guide for Swagelok® Tube Fittings

Swagelok, Ferrule-Pak, Goop—TM Swagelok CompanySAF 2507—TM Sandvik ABTygon—TM Norton Company© 2002, 2003, 2004 Swagelok CompanyPrinted in U.S.A., GLLMarch 2004, R2MS-13-151

Safe Product SelectionWhen selecting a product, the total systemdesign must be considered to ensure safe,trouble-free performance. Function, materialcompatibility, adequate ratings, properinstallation, operation, and maintenance arethe responsibilities of the system designerand user. The complete catalog contentsmust be reviewed to ensure that the systemdesigner and user make a safe productselection.

Caution: Do not mix or interchange partswith those of other manufacturers.

For product technical data, see the SwagelokGaugeable Tube Fittings and Adapter Fittings catalog.