SuperstmtThreaded Products & Hardware (Series 100)Nuts & Bolts

E-142Hex Head Cap ScrewSizes: 1/4 x 1", 1/4 x 1-1 /2" ,3/8 x 1", 3/8 x 1-1 /2" ,1/2 x 5/16" & 1 / 2 x 1 - 1 / 2 "See price sheet for additionalsizes.

E-149Slotted Hex IndentedHead Machine ScrewSizes: 1/4 x3/4", 1/4 x 1",5/16 x 1 - 1 / 4 " & 3/8 x 1 -1 /4 "

E-150-SLag BoltScrew Size: 3/8" & 1/2"Drill Size: 1/4" & 11/32"

E - 1 5 1 - DWood Screw DriveSize A: 16"Size B: 2"Max. Rec. Load: 100

ES-142Seismic Stiffner NutSize:ES-142-1/2x 1 -1 /2 "Bolt Dia.: 1/2"

E-120

CatNo.

DesignLoad Ibs.

Std.Ctn.

E-120-3/8E-120-1/2

1% % 10001800

2525

CatNo.

DesignLoad Ibs.

Std.Ctn.

E-122-3/8E-122-1/2

1%11/2

10001800

2510

E122

DesignLoad Ibs.

Std.Ctn.

E-130-3/8E-130-1/2

E-130

1% %11/2 1/2

10001800

2525

CatNo.

DesignLoad Ibs.

Std.Ctn.

E-131-3/8E-131-1/2

10001800

2510

E-131

Threaded Rod

E-151 - Coach Screw Rod

E-151Black availableupon request.Machine Threadedopposite end,carbon steel.Order by Prod. #,rod, size and rodlength.

CatNo.

E-1 51 -3/8E-1 51 -1/2

RodSize

%1/2

StandardRod Lengths

4 , 6 , 8 , 1 0 , 1 24 , 6 , 8 , 1 0 ,

Std.Ctn.

100100

H-104Series Rod

H-104 - Hanger Rod: Continuous ThreadedCatNo. Size

H-1 04-1/4 1/4H-1 04-3/8 3/sH-1 04-1/2 54H-1 04-5/8 5/8H-1 04-3/4 %H-1 04-7/8 %H-1 04-1 1

Threadsper inch

201 6131 11098

DesignLoad Ibs.

1506101 1 3 01 8 1 027101304960

Std.Ctn.

*******

Black available upon request.•Standard lengths 6 ft . , 10 ft. and 12 ft.

Standard Finish - GoldGalv® brand

ThomasiBettsB10

SuperstrutFinishes

Green or White Urethane Powder Coated(Suffix GR or WH)Urethane powder resins are applied electrostatically to thesteel after fabrication. Once the material is completelycovered with the powder-form urethane, it proceeds througha 400° baking process for ten minutes, creating a chemicalbond. This results in a minimum of 1.5 mil thickness ofurethane coating providing excellent resistance to chippingor peeling.

Pregalvanized (Suffix PG)A zinc coating is applied by hot-dipping the steel coil at themill prior to fabrication. Once the material is worked by roll-forming, cutting, or punching, minimal protection is providedfor raw edges. This weakness is typical with precoatedmaterial and affects the channel section around holes,extreme ends, and the edges of the "U" shape lips.Superstrut pregalvanized material is in conformance withASTM A-525/G-90 specification standards, representing 0.90ounces of zinc per square foot of steel. This finish is oftenreferred to as "hot-dipped mill galvanized" or "millgalvanized."

Hot-Dipped Galvanized (Suffix HDG)The material is zinc coated after fabrication providing totalproduct protection on all surfaces. The fabricated channel orfitting is suspended and then dipped into tanks of hot zincfor a prolonged period, creating a coherent bond. The resultis superior corrosion resistance as compared to pre-galvanized material. Hot-dipped galvanizing is notrecommended for threaded products, considering the zinccoating thickness will often disrupt the threads. Superstruthot-dipped galvanized is in conformance with ASTMSpecifications A-123 (formerly A-386) and A-153. Superstrutchannels maintain a minimum 1.5 ounces of zinc per squarefoot of steel or 2.5 mils (ASTM A-123, Thickness Grade 65).This finish is also referred to as "hot-dipped galvanized afterfabrication."

Electrogalvanized (Suffix EG)Often referred to as "zinc plated" or "electroplated zinc," thesteel and .5 mils of zinc are bonded by an electrolysisprocess. This is the identical process used in the GoldGalv®hardware finish without the numerous benefits of the goldcolored dichromate conversion coat (see GoldGalv""hardware finish for more information). Electrogalvanizing ismost commonly applied to small fittings, hardware, andthreaded products.

PVC Coated (Suffix PVC)A polyvinyl chloride (PVC) plastic coating is fused to thechannel, fitting or accessory after fabrication by immersingthe part in fluidized PVC tanks. The fused-melt mixedpowder PVC coating thickness is 15 mils (.015") plus orminus five mils. PVC material is a thermoplastic and willsoften in high temperature. An inherent weakness with PVCcoatings occurs when field alterations are applied, such ascutting or drilling. These acts disrupt the sealed PVCproduct and warrant field touch-up. Thomas & Betts cannotbe held responsible for field-altered PVC coated products.

Copper Plated ("T" inserted as the second digit of thepart number; Example: CTL-710-2)Plain steel proceeds through a series of rinse tanks to cleanthe material surface. Once cleaned, the fabricated part isetched by dipping into an acid pickle bath to prepare thesurface for adhesion. Copper is electrically applied bysubmerging in a copper bath. To seal the finish, the productcontinues to a sealer tank and then dried by forced hot air.

Black (Suffix B)A black finish is raw steel with only a light oil finish assupplied by the steel manufacturer. There is no protectionagainst red rust.

Stainless Steel (Suffix SS)Superstrut channel is supplied in type 304 stainless steelwhen required. Type 316 stainless steel may be availableupon request.

Aluminum (Suffix AL)Superstrut channel and hardware are available in Aluminum.See page 65 of this catalog for more information.

Warning: Load tables, charts, and design criteria provided in thiscatalog are intended as guides only. Selection of proper product,installation intervals, erection, and placement are the responsibilityof the user.Pipe hanger products when improperly used as tools of erectionhave occasionally failed. The user is cautioned to use the productonly as it was intended to avoid an accident.

We reserve the right to change material and finish specificationswithout notice, to improve our products.

ThomasiBettsB4