Z-PR

IME

™PLU

S

Super Clinicians Deserve Superior Bonds!

Rx Only

ZZiirrccoonniiaa -- AAlluummiinnaa -- MMeettaall PPrriimmeerr

• The only primer with proven chemical bond to Zirconia*

• Unparalleled bond strengths to Zirconia, Aluminaand Metal restorations

• Compatible with light-cured or dual-cured resin luting cements

• Convenient, single bottle delivery offers ease of dispensing

• Significantly enhances bond strengths of other resincements*

* Data on file. BISCO, Inc.

BISCO’s Z-PRIME™ Plus is a

single-component primer

used to enhance adhesion

between indirect restorative

materials and composite

resin cements. It can be

used as a surface treatment

for Zirconia and Alumina

metal oxide ceramics, as well as other types of metals/

alloys, composites and endodontic posts. Z-PRIME Plus

has been specifically formulated to provide high bond

strengths to resin cements used in both self cure and light

cure modes.

25

30

23.0

16.0

13.0

6.0

9.0

2.0

11.0

7.0

Z-PRIME Plus &DUO-LINK™

AZ PRIMER & ResiCem

S

BS

(MP

a)

Clearafil CeramicPrimer &

Panavia F2.0

Monobond Plus & Multilink

20

15

10

5

0

Before and After Aging2hrs/37°C 72hrs/100°C

Average Shear Bond Strength of different Zirconia Primers with their corresponding (S/C mode) resin cement systems.

Bond Strengths using Z-PRIME Plus

Bond Strengths without the use of

Z-PRIME Plus

30

25

20

15

10

5

0

Zirconia Alumina High Noble AlloyTitanium

SB

S (M

pa)

Z-PRIME Plus creates predictable bonds to a multitude of indirect substrates.

Shear Bond Strength of Z-PRIME Plus with DUO-LINK™ on Different Substrates

SBS

(MPa

)

SBS

(MPa

)

Scan the QR Code with your smart phone to view more information on zirconia bonding

TThhee FFiirrsstt EEvveerr DDeeddiiccaatteedd ZZiirrccoonniiaa PPrriimmeerr......

Z-PRIME Plus significantly enhances bond strengths to Zirconia, Alumina and Metal substrates better than any other primer on the market!

CCoonnffiiddeennccee iinn IInnddiirreecctt AAddhheessiioonn......CChheemmiiccaallllyy PPrroovveenn!!!!!!

Prepared multiple-unit bridge. After cleaning internal surface, apply a thinlayer of Z-PRIME Plus to the Zirconia bridge.Air dry for 3 to 5 seconds.

Apply one to two coats of ALL-BOND SE®and agitate each coat for 5 to 10 seconds.

Air dry to remove solvent and light-cure for 10seconds.

Fill internal surface of the restoration withDUO-LINK resin cement and immediatelyseat restoration.

Final restoration.

Dentistry courtesy of Dr. Ross Nash

YOUR PATIENTS DESERVE SUPERIOR BONDS

SIMS data of Zirconia with (Z-Primed Zirconia) and without (Unprimed Zirconia) Z-PRIME Plus. A fragmentation with mass of 549in Z-Primed Zirconia indicates a chemical bond (P-O-Zr) was formed between the Zirconia and Z-PRIME Plus.

Chen L, Suh B. Zirconia-Bonding-1: Chemical Bond Formation between ZPRIME and Zirconia Ceramics. J Dent Res 90 (Spec Iss A): #0371, 2011

Chemical Bond to ZirconiaSIMS Spectrum

Chemical bond between Z-PRIME Plus and Zirconia

ZZiirrccoonniiaa -- AAlluummiinnaa -- MMeettaall PPrriimmeerr

DUO-LINK SE KIT FEATURES Z-PRIME PLUS...

ORDERING INFORMATION

FAST AND PREDICTABLE CEMENTATION

The DUO-LINK™ SE Kit is a universal adhesive cementation system that provides the clinician with all

the necessary components to address adhesion to both the tooth structure and indirect substrates.

DUO-LINK SE allows you to build a solid foundation for all your indirect restorations. Increase bond

strengths to multiple substrates with the ultimate combination of products: Z-PRIME Plus, DUO-LINK,

ALL-BOND SE and Porcelain Primer. To learn more view our DUO-LINK SE video at bisco.com.

TO ORDER CALL: 800-247-3368 • 847-534-6000

BISCO products are proudly made in the U.S.A.

www.bisco.comMC-2231ZP

Z-PRIME PLUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6001P

1 Bottle Z-PRIME Plus (4ml), Technique Card,

Instructions/MSDS

DUO-LINK SE KIT . . . . . . . . . . . . . . . . . . . . . . . . . A-19520K

1 Dual-Syringe DUO-LINK Shade: TRANSLUCENT

(Base/Catalyst, 8g mixed), 1 Bottle ea. ALL-BOND SE Parts

I & II (6ml ea.), 1 Bottle Z-PRIME Plus (2ml), 1 Bottle

Porcelain Primer (3ml), Accessories, Instructions/MSDS

DUO-LINK is a dual-cured cement that provides an extremely high degree of conversion

in both light cure and self cure modes. With the added benefits of low film thickness and

high filler content, DUO-LINK ensures maximum performance for any clinical situation.

• High degree of conversion in both light cure and self cure modes

• High filler content increases strength and resistance to wear

• Low film thickness ensures the restoration is completely seated

• A universal cement with a proven clinical track record