SUBMERSIBLE - arenagroup.co.zaarenagroup.co.za/wp-content/uploads/2018/03/submersible.pdf · Sand and Slurry agitator Group The Water Specialist • Liqud temperature: up to 40°C

GroupThe�Wate r�Spec ia l i s t��

SUBMERSIBLE


WWW.ARENAGROUP.CO.ZA

http://WWW.ARENAGROUP.CO.ZA

VTS range 1.5-1 1 k W 2VHM range 22-4 5 kW 3VSS rang e 4VTC rang e 6C & B series range 8VX range 9WQSD ra n g e 9

INDEX



VTS - RANGE 1.5-11kWGeneral Dewatering Pump Features:

• Completely water-�ght cable entry sealed with epoxy resin.• Durable Stainless steel outer construc�on case achieves

superior heat dissipa�on.• Oil-free herme�cally sealed, with built-in thermal • overload protector.• 3 phase, 2 pole, 50Hz 2850rpm, Insula�on Class F.• Protec�on Type IP68.• Inlet Plate and pump casing are made of wear-resistant duc�le

iron to withstand very abrasive liquids.• Max. liquid temperature: 40°C.• Depth submersion: 10m

• General construc�on and civil engineering applica�ons.• Tunnel and subway construc�on, mining and

reclama�on opera�ons.• Deep well pre-dewatering.

• Dirty water non slurry applica�ons.

Applications:

OUTPUT KW

MODELDISCHARGE

DIA.MMBEP HEAD

MBEP FLOW

M³/MINMAX SOLIDS

MMWEIGHT

KG

1.5 VTS 215 50 15 0.25 8.5 35

2.2 VTS 222 50 19 0.29 8.5 37

3.7 VTS 237 50 27 0.25 8.5 58

5.5 VTS 355 80 24 0.63 8.5 65

7.5 VTS 475 100 33 0.75 11.6 108

11 VTS 4110 100 35 0.88 11.6 123


VHM - RANGE 22-45kWGeneral Dewatering Pump Features:

• Complete water-�ght cable entry sealed with epoxy resin.• Durable cast iron outer construc�on case achieves superior

heat dissipa�on.• Oil-free herme�cally sealed, with built-in thermal overload

protector.• 3 phase, 2 pole, 50Hz 2850rpm, Insula�on Class F.• Protec�on Type IP68.• Inlet plate and pump casing are made of wear-resistant duc�le

iron to withstand very abrasive liquids.• Replaceable and adjustable high chrome wear rings provide

increased wear resistance.• Thermal and amperage protectors can help to prevent motor

failure in run-dry or surge condi�ons.• High pressure, dual sillicon carbide mechanical seals, able to

operate in a seperate oil chamber.• An�-wicking cable entrance.• Max. liquid temperature: 40°C.• Depth submersion: 10m.

• Used in abrasive and corrosive applica�ons.• General construc�on and civil engineering

applica�ons.• Tunnel and subway construc�on, mining and



Applications:

OUTPUT KW

MODELDISCHARGE

DIA.MMBEP HEAD

MBEP FLOW

M³/MINMAX SOLIDS

MMWEIGHT

KG

22 VHM422 100 60 1.1 6 365

22 VHM622 150 37 2 6 365

30 VHM430 100 70 1.2 6 370

30 VHM630 150 45 2.3 6 370

37 VHM637 150 80 1 6 555

37 VHM837 200 35 3.6 6 555

45 VHM645 150 80 1.4 6 555

45 VHM845 200 35 4.5 6 555

• General construc�on and civil engineering applica�ons.• Tunnel and subway construc�on, mining and




VSS - RANGE

• Capacity: up to 372m³/h.

• Head: up to 32 meters.

• Discharge: 80mm (3’’) to 200mm (8’’).

• Power: 4kW (5.5 HP) to 22kW (30HP).

• Power supply: three phase 380V ± 10%, 50Hz

• Insula�on class: F.

• Protec�on class: IP68.

• Cable length: 8m.

• Water temeprature: up to 40°C.

• Maximum water depth: 15m.

OUTPUT KW

MODELDISCHARGE

DIA.MMMAX FLOW

M³/HMAX HEAD

4 80VSS44 80 100 14.8

6 100VSS46 100 140 16.5

9 150VSS49 150 174 23

15 200VSS415 200 372 22

22 200VSS422 200 360 32

Sand and Slurry agitator


VSS - RANGE

ITEM NO.

PART NAME MATERIALITEM NO.

PART NAME MATERIAL

01 Hose coupling Cast iron 25 Strainer Steel

02 Handle Steel 27 Stator

05 Upper cover Cast iron 28 Rotor Shaft: AISI420SS

07 Bearing house Cast iron 31a Bearing Ball bearing

11 Motor body Cast iron 31b Bearing Ball bearing

13 Pump body Cast iron34 Mechanical seal

Sic-Sic/Sic-SicTc-Sic/Sic-Sic(>15kW)14a Impeller High chrome alloy

14b Agitator High chrome alloy 35 Oil seal

16a Inlet plate High chrome alloy 47 Cable

16b Inlet plate Cast iron

MATERIAL OF CONSTRUCTION:

DIMENSIONS & WEIGHTS:

mm mm mm mm mm mm mm mm Kg Kg mm

80VSS44 80 350 260 816 678 326 730 250 108.5 119 885x385x395

100VSS46 100 416 305 844 682 373 730 250 141 151 470x410x985

150VSS49 150 434 324 889 727 407 776 250 171 183 470x470x1045

200VSS415 200 484 352 1121 889 457 980 295 260 278 540x500x1220

200VSS422 200 578 442 1245 1015 528 1200 330 408 434 740x570x1460

Sand and Slurry agitator


• Liqud temperature: up to 40°C.• pH Values: 4-10, Cats Iron.• Solids handling: up to Ø80mm.• Protec�on class: IP68, Class B.• Pump constructed out of Cast Iron.• Impeller construc�on out of Cast Iron, open type single

channel.• Separate cu�er mechanism located on pump inlet.

• Double mechanical sha� seal (silicon carbide-silicon

carbide/carbon graphite-ceramic).

• Maximum opera�ng depth: 10m below water level.

OUTPUT KW

MODELDISCHARGE

DIA.MMMAX FLOW

M³/HMAX HEAD

1.5 VTC21.5 50 27 22

2.2 VTC22.2 50 27 26

3.7 VTC23.7 50 29 34

5.5 VTC35.5 80 70 32

7.5 VTC47.5 100 84 40

11 VTC411 100 86.4 48.5

15 VTC415 100 78 55

VTC - RANGEGeneral dewatering


VTC - RANGE

ITEM NO.

PART NAME MATERIALITEM NO.

PART NAME MATERIAL

01 Hose coupling Cast iron 28 Rotor Shaft: AISI420SS

02 Handle Rubber & Steel 31a Bearing Ball bearing

05 Upper cover Cast iron 31b Bearing Ball bearing

11 Motor body Cast iron 33 Motor protector Ball bearing

13 Pump body Cast iron34 Mechanical seal

Sic-Sic/Sic-SicTc-Sic/Sic-Sic(>15kW)14 Impeller High chrome alloy

16 Inlet plate Ductile iron 35 Oil seal

25 Strainer Steel 47 Cable

27 Stator

MATERIAL OF CONSTRUCTION:

DIMENSIONS & WEIGHTS:

mm mm mm mm mm mm mm Kg Kg mm

VTC21.5 50 235 173 535 216 505 120 36 40 610x265x265

VTC22.2 50 235 173 535 216 505 120 39 43 610x265x265

VTC23.7 50 283 208 628 252 629 150 63 68 710x320x295

VTC35.5 80 283 208 671 252 590 150 77 84 750x350x360

VTC47.5 100 330 240 764 314 676 190 106 116 835x365x385

VTC411 100 373 255 807 350 695 190 136 148 885x415x435

VTC415 100 373 255 842 350 755 190 144 158 935x415x435

General dewatering


C SERIES - RANGERaw sewage with cutter

• Liqud temperature: up to 40°C.• pH Values: 6-10.• Protec�on class: IP68, Class B.• Pump constructed out of Cast Iron.• Impeller construc�on out of Cast Iron, open type single

channel.• Integrated cu�er mechanism located on pump inlet.




OUTPUT KW

MODELDISCHARGE

DIA.MMMAX FLOW

M³/HMAX HEAD

M

1.1 50C21.1S 50 27 15

1.1 50C21.1 50 27 15

1.5 50C21.5 50 31 13

2.2 50C22.2 50 35 17

3.0 80C23.0 80 67 21

4.0 80C24.0 80 79 24

5.5 100C25.5 100 107 27

7.5 100C27.5 100 120 30

B SERIES - RANGERaw sewage with cutter

• Liqud temperature: up to 40°C.• pH Values: 6-10.• Protec�on class: IP68, Class B.• Pump constructed out of Cast Iron.• Impeller construc�on out of Cast Iron, open type single

channel.• Integrated cu�er mechanism located on pump inlet.




OUTPUT KW

MODELDISCHARGE

DIA.MMMAX FLOW

M³/HMAX HEAD

M

11 150B411 150 260 24

15 200B415 200 490 21

18.5 200B4185 200 550 27

2.2 200B422 200 550 27


OUTPUT KW

MODELDISCHARGE

DIA.MMMAX HEAD

MMAX FLOW

M³/hWEIGHT

0.55 VX10-1 50 8 13 8.4

0.75 VX12-1 50 10 16 12.1

WQSD - RANGE

• WQSD Range pumps are fi�ed with open vane impellers.• The units are designed for screened sewage pumping applica�ons but are supplied with

a removable suc�on screen for dual purpose use in dewatering applica�ons.• Liquid temperature: up to 40°C.• Max opera�ng depth: 10m below water level.

• Cast Iron pump body

VX - RANGE

• It is fi�ed with a stainless steel vortex impeller and is suitable for pumping liquids containing suspended solids (including short fibres).

• Liquid temperature: up to 40°C.

• Max. opera�ng depth: 10m below water level.

Screened sewage/dirty water

Screened sewage/dirty water

OUTPUT KW

MODELDISCHARGE

DIA.MMMAX FLOW

M³/HMAX HEAD

MWEIGHT

KG

0.18 WQSD 4-5 40 6 6 12

0.25 WQSD 4-7 40 9 8 12.8

0.55 WQSD 10-7 50 15 9 14.5

0.75 WQSD 10-9 50 18 10 15.7

1.1 WQSD 15-10 50 24 12 17.3

1.5 WQSD 25-10 50 27 14 20

2.2 WQSD 25-14 50 36 20 27

3.0 WQSD 30-15 75 60 22 31

3.7 WQSD 30-18 75 66 23 35.5


Documents

SUBMERSIBLE - arenagroup.co.zaarenagroup.co.za/wp-content/uploads/2018/03/submersible.pdf · Sand and Slurry agitator Group The Water Specialist • Liqud temperature: up to 40°C