STRIP STEEL - Bandstahl Schulte · DIN EN 10048 / 10051 / 10140 or more restrictive All dimensions depend on the quality grade of the coils to be delivered: up to 700 mm width: 400

WIDE STRIP SLITTING LINEHot-rolled steel strips slit from hot-rolled wide coil

Cold-rolled strips

Cold-rolled steel strips

Quality steel strips

Oscillated steel strips

Roller-chain steel strips for plates / coils / cases

Contract manufacturing of cold- and hot-rolled strips

STRIP STEELQUALITY IN EVERY VARIATION

COLD ROLLING MILL

STRIP STEELQUALITY IN EVERY VARIATION

We can all say a lot, but when it comes to doing, we should stick to what we are good at.

In our case, this is the high-quality manufacturing and refinement of strip steel – in any variation that the custo-mer requires.

As a family-run company with an avowed commitment to its location and its home region, we can look back on more than 50 years of history that have been shaped by growth and modernisa-tion. We are taking on the challenges of the future with confidence and with

the full commitment of our entire work-force. Our actions are determined by the wishes of our customers – today as in the past. And we assert with confidence that we are exactly the right size to deal with demanding and sophisticated tasks – but also flexible enough to fulfil indivi-dual requirements.

With this brochure we are providing you with a brief insight into our company and hope that we can arouse your interest in us and our products.

Welcome! Sincerely yours,

O V E R

50 YEARS

Carl-Michael Schulte Wolfram Schulte

OUR PRODUCT RANGE AT A GLANCE

HOT-ROLLED STEEL STRIPS AS PER DIN EN 10111 / 10025 / 10083 /10084 / 10149

hot slit strips

hot strips with mill edges

in coils or in cut length

in all regular quality grades and variations

COLD-ROLLED STRIP AS PER DIN EN 10130 / 10268

in coils

as slit strips


also surface-finished

also specially-treated

COLD-ROLLED STEEL STRIPS AS PER DIN EN 10139 / 10132 / 10268

in all variations and quality grades


surface-finished on request

QUALITY STEEL STRIPS AS PER DIN EN 10132

in all variations and quality grades


speciality: roller-chain strip steel and

strip steel in fine blanking quality

STRIP STEEL – QUALITY IN EVERY VARIATION

2 3

QUALITY:MANAGEMENT BY KNOW-HOW

We produce high-quality strip steel. And we do this exactly the way we say and believe it should be done.

The foundation of excellent products is the permanent monitoring of quality at each individual stage of production, together with the meticulous checking of all products by trained employees with state-of-the-art equipment in our own laboratory.

Increasingly demanding market require-ments in respect of quality and flexibi-lity are necessitating ever greater efforts in the fields of quality assurance and organisation.

Quality is capable of being produced.

We guarantee the precision that custo-mers desire, as well as all the other cha-racteristics attributed to the products we deliver. We do this by means of...

selective use of primary material

permanent quality assurance at the individual production stages and

mandatory final checking of our products with state-of-the-art equipment in our own laboratory.

Our IT-supported order handling and production control safeguard the flexi-bility of production that our customers desire, as well as ensuring a high speed of reaction in our communication with our business partners.

We help to solve specific problems in close cooperation with our customers and suppliers.

QUALIFLEX.


HOT-ROLLED STEEL STRIPSSLIT FROM HOT-ROLLED WIDE COIL

AS PER DIN EN 10111/10025/10083/10084/10149

Quality grades: see page 12

All intermediate dimensions deliverable

Variations: pickled/non-pickled

Tolerances: DIN EN 10048 or more restrictive as per 10051

Coil inner diameter: 400 mm / 500 mm 600 mm by arrangement

Coil weights: up to 20 kg/mm strip width

In cut length: by arrangement

Thickness from (mm)1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 8.00 10.00 12.00

Wid

th (m

m)

10203050

125300

600 -1850

= deliverable = deliverable by arrangement

Hot-rolled steel strips slit from hot-rolled wide coil

Cold-rolled strips



Oscillated narrow strip steel in coils

Roller-chain strip steel


4 5

COLD-ROLLED STRIPS AS PER DIN EN 10130 / 10268


All intermediate dimensions deliverable additional dimensions on request

Tolerances: DIN EN 10131 or more restrictive

Variations: blank surface-finished specially-finished

Surfaces: DIN EN 10130 A / B r/m/g/b

Coil inner diameter: 400 mm / 500 mm 600 mm by arrangement

Coil weights: up to 20 kg / mm strip width

In cut length: of max. 6000 mm length

Thickness from (mm)max. 700 mm Inital width: max. 1880 mm

0.50 0.60 0.70 0.80 0.90 1.00 1.25 1.50 1.75 2.00 2.50 3.01

Wid

th fr

om (m

m)

1050

200400750

10001850



COLD-ROLLED STEEL STRIPS AS PER DIN EN 10139 / 10132 / 10268



Edge finishes: slitted edge (GK) sharp-edged (SK) round-edged (RK) special edges (SoK)

Tolerances: DIN EN 10140 (A, B, C)

Coil inner diameter: 400 mm or 500 mm, additional diameters by arrangement

Coil weights: up to 20 kg / mm strip width

Oscillated coils: 150 – 500 mm width

In cut length: of max. 6000 mm length

Speciality: fine blanking quality

Surfaces: DIN EN 10139 MA / MB / RM / RL

Thickness from (mm)0.40 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00 4.00 5.00 8.00 10.00

Wid

th fr

om (m

m)

10152030

100200300

430 ≤ 530



Cold-rolled strips






6 7



Variations: soft-annealed and light skin-passed (+LC) annealed and rolled to the desired hardness (+CR) hardened grey-blue (+QT) hardened, polished white / blue / yellow, blank

Edge finishes: slitted edge (GK) sharp-edged (SK) round-edged (RK) special edges (SoK)

Tolerances: DIN EN 10140 (A, B, C)

Coil inner diameter: 400 mm or 500 mm


QUALITY STEEL STRIPS AS PER DIN EN 10132 / 10087


OSCILLATED NARROW STRIP STEEL IN COILSCUT / ROUND / SHARP / SPECIAL EDGES (GK / RK / SK / SOK)



Edge finishes: slitted edge (GK) up to 3.00 mm sharp-edged (SK) round-edged (RK) special edges (SoK)

Coil inner diameter: 400 mm or 500 mm

Coil weights: max. 5000 kg

Coil width: 150 – 500 mm

Thickness from (mm)0.60 0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 - 10.00

Wid

th fr

om (m

m) 10

152030

40 - 50


Thickness from (mm)0.40 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00 4.00 5.00 8.00 10.00

Wid

th fr

om (m

m)

10152030

100200300

430 ≤ 530



Cold-rolled strips






8 9

ROLLER-CHAIN STRIP STEELFOR PLATES / COILS / CASES

All intermediate dimensions deliverable additional dimensions by arrangement

In all regular quality grades: hot-rolled cold-rolled specially-treated hardened Tolerances:

DIN EN 10048 / 10051 / 10140

Coil inner diameter: 400 – 500 mm, additional inner diameters by arrangement

Coil weights: up to 20 kg /mm strip width

Thickness from (mm)0.40 0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.50 3.00 4.00 5.00 6.00 8.00 - 10.00

Wid

th fr

om (m

m)

1015203050

100200

430 ≤ 530


GüTENKATALOG.


CONTRACT MANUFACTURING OF COLD- AND HOT-ROLLED STRIPS All intermediate dimensions

deliverable additional dimensions by arrangement

Width tolerance: DIN EN or more restrictive

Tolerances: DIN EN 10048 / 10051 / 10140 or more restrictive

All dimensions depend on the quality grade

Inner diameter of the coils to be delivered: up to 700 mm width: 400 – 600 mm from 701 mm width: 500 – 750 mm

Inner diameter of the finished material: 400 mm / 500 mm / 600 mm


Thickness from (mm)max. 700 mm Initial width: max. 1880 mm

0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.25 1.50 1.75 2.00 2.50 3.00 4.00 5.00 8.00 10.00 12.00

Wid

th fr

om (m

m)

1050100200750

1000-1850



Cold-rolled strips






10 11

COLD-ROLLED STEEL STRIPS PAGE 7+9

COLD-ROLLED STRIPS PAGE 6

QUALITY STEEL STRIPS PAGE 8 - 10

DIN EN 10111: DD 11 DD 12 DD 13 DD 14

DIN EN 10025: S 235 JR S 275 JR S 355 JR

DIN EN 10083: C 22 E C 35 E C 45 E C 50 E C 55 E C 60 E 25 Cr Mo 4 42 Cr Mo 4 51 Cr V 4

DIN EN 10084: C 10 E C 15 E 16 Mn Cr 5

DIN EN 10149: S 315 MC S 355 MC S 420 MC S 460 MC S 500 MC S 550 MC S 600 MC S 700 MC

HOT-ROLLED STEEL STRIPS PAGE 5

DIN EN 10268: HC 260 LA HC 300 LA HC 340 LA HC 380 LA HC 420 LA HC 460 LA * HC 500 LA * HC 600 LA * HC 700 LA *

DIN EN 10268: HC 260 LA HC 300 LA HC 340 LA HC 380 LA HC 420 LA

DIN EN 10130: DC 01 DC 03 DC 04 DC 05

DIN EN 10139: DC 01 DC 03 DC 04

PART 3: C 22 E C 35 E C 45 E C 50 E C 55 E C 60 E 25 Cr Mo 4 42 Cr Mo 4

PART 4: C 55 S C 60 S C 67 S C 75 S 51 Cr V 4

DIN EN 10132: DIN EN 10087: 9 S Mn Pb 28 11 S Mn Pb 30

* by arrangement

PART 2: C 10 E C 15 E 16 Mn Cr 5

Against a backdrop of intensifying demands, we act instead of merely reacting.

We do this with reflection and expertise in the interests of our customers.

For only those who remain nimble and flexible, keep their eye on the markets and

deliver high quality in efficient production processes will be successful in the future.

We‘re investing in the knowledge of our employees and in technologically optimised

production methods - with due regard to all the requirements of sustainable

environmental management.


WE‘RE CHANGING.AND WE‘RE DOING IT FOR YOU.

12 13

MORE THAN JUST A GOOD STORYThe past 50-plus years have been shaped by the personal commitment and entrepreneurial impact of founder Karl Schulte, the entire family and all of our employees. This commitment is our motivation – for the current and future generations.

15.02.1955 Gesellschaftsvertrag d.h. Gründung der Firma Bandstahl Handelsgesellschaft Schulte

& Co. durch Karl Schulte und Eva-Maria Kuhlmann

02.02.1961 Gründung der Firma Ebbers & Co. durch Heinrich Ebbers und Karl Schulte

02.02.1961 Gründung der Firma Technika GmbH, Hagen durch Karl Schulte und Eva-Maria

Schulte05.08.1961 Austritt von Heinrich Ebbers aus der Firma Ebbers & Co.

1961 Aufbau Werk Letmathe01.10.1966 Übernahme Firma Gebr. Bongardt & Co., Hagen-Kabel

01.07.1971 Zusammenlegung der Werke unter dem Namen Gebr. Bongardt & Co. in Hagen-Kabel

1975 Aufbau einer Breitband-Spaltanlage zur Erweiterung der Produktpalette

um den Spaltbandbereich (Stahl-Service-Center)

1976-1980 Geschäftsführung der Firma Robert Zinn, Engels & Co., Kaltwalzwerk, Wuppertal

1987 Übernahme der Maschinen des Kaltwalzwerkes Mannesmann-Röhrenwerke AG,

Werk Kronprinz, Solingen15.12.1989 Übernahme des Kaltwalzwerkes Osterseifen GmbH, Olpe,

wieder unter dem Namen Ebbers & Co.1992 Ernennung von Carl-Michael und Wolfram Schulte zu zusätzlichen Geschäftsführern

1994 Übernahme der Maschinen des Kaltwalzwerkes Andernach & Bleck, Hagen

01.01.1995 Übertragung von Geschäftsanteilen auf

Carl-Michael, Wolfram und Anno Schulte und auf Anna-Katharina Bühner geb. Schulte

1995 Übernahme der Maschinen des Kaltwalzwerkes Rummenoll & Co., Hagen

2004 Übernahme von Grundstück und Gebäuden des heutigen Werkes Nord

2005 Übernahme der Maschinen des Kaltwalzwerkes Becker, Cramer & Römer,

Hagen-Hohenlimburg

FROM THE SOUTH(FRANKFURT)

Take the autobahn A45 as far as Autobahnkreuz (interchange) Hagen

then at the first exit, take the A46 in direction of Hagen (Hagen-Boele / Hagen-Emst)

bear right in the direction of Hagen-Boele and after around 1 km turn right at the Aral filling station

turn left into Pappelstraße after around 800 m (crossroads with Feldmühlenstraße)

after 100 m to your right you will find Bandstahl Schulte & Co.

FROM THE NORTH (BREMEN/HAMBURG)FROM THE WEST(COLOGNE/DüSSELDORF)

Take the autobahn A1 as far as the exit Hagen-Nord, then

left (from the north) or right (from the west) in the direction of Hagen-Hohenlimburg / Iserlohn

after around 80 m turn right at the first crossroads, after 400 m proceed straight ahead through the crossroadss

then immediately take the first right turn into Feldmühlenstraße

after 100 m to your left you will find Bandstahl Schulte & Co.

HOW TO FIND US.


14 15

Feldmühlenstr. 3 · 58099 Hagen P.O. Box 60 01 22 · 58137 Hagen

Germany

Tel. +49 2331 365-0 Fax +49 2331 365-150

[email protected] www.bandstahl-schulte.de 0

6/2

016

/10

0 –

Sub

ject

to

tech

nica

l cha

nges

.

Documents

STRIP STEEL - Bandstahl Schulte · DIN EN 10048 / 10051 / 10140 or more restrictive All dimensions depend on the quality grade of the coils to be delivered: up to 700 mm width: 400