Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Storage SolutionsStorage Solutions
WINTER 2010
14421 Bonelli StreetCity of Industry, CA 91746
wwwwww.. RRaappiiddRRaacckk..ccoomm880000--773366--77222255
(( RR AA CC KK ))
FFaaxx:: 662266--333333--55226655
Space Saver
Bulk Racks
‘Z’-Beam
Record Stora
ge
RapidGrate Ste
el Decking
Catwalks
Stairways
Tire & Batte
ry Racks
Custom Appli
cations
Slotted Angle
Mobile Aisle
MADE IN THE U.S.A
Contact Customer Service Direct
1-888-503-8218
REV: 2.19.10
Additional information PageOrdering Information 24
Slotted Angles 25
Rapid Rack Components 26-28
Capacity Chart 29
Key Rack Components 30-32
Key Rack Design Information 33
Rapid Rack Design Information 34-35
General Information/Seismic zone map 35
Product Pages
Standard Components 4
Loadmaster 5-6
Space Saver 7-8
Bulk Storage 9-10
Record Archive 11-12
‘Z’ Beam 13-14
Steel Shelving 15
Profile Series: ‘Z’ Beam / Single-rivet / Double-rivet 16-17
Automotive Storage 18-19
Mobile Aisle Systems 20-21
Stairways 22
RapidGrate Decking 22
Catwalks 23
Rapid Rack features:
Distributors:� Call 800-736-7225
� www.RapidRack.com
Our MissionStatement
Through unity, trust andintegrity, wemanufacture reliableand economicalindustrial stock shelvessystems. We arecommitted toengineering expertise,quality workmanshipand on time delivery.
We always service ourcustomers’ needs in apositive, courteous andefficient manner.
Our dedication setsRapid Rack apart fromthe competition at acost that provides profitfor everyone.
2
DuPont Powder Coatings
Our storyFor over 50 years, Rapid Rack Industries has manufactured material handlingstorage products for industrial, commercial and consumer markets. Ourcapabilities include heavy-duty boltless shelving, two- and three-level catwalksystems, mobile aisle systems and Gorilla Rack consumer products. We offerwork benches, carts, drawers and other accessories to enhance the use of ourshelving products.
Rapid Rack introduced boltless shelving over 35 years ago andrevolutionized the shelving industry. The sturdiness and ease ofassembly of the boltless product rendered the bolted style ofshelving all but obsolete.
In April 2005 we expanded to the eastern United States with adistriubtion center in Nashville, Tennessee to provide the samehigh-quality product and exemplary customer service that hasallowed us to capture the largest market share in the west.
3
Standard ComponentsRapid Rack shelving products are the
most versatile boltless storage systemsavailable today. Components lock into
place with the tap of a mallet.
Angle post(AP)
Tee post (TP)
Angle post,heavy duty(APH)
Double rivetbeam (DRB)
Double rivetchannelbeam (DRC)
Double rivet‘Z’ Beam(DRBZ)
Double rivetlow profilebeam(DRBLP)
Single rivetbeam (SRB)
Tie support(TS)
Shelfmaterial
Used for standard shelvingapplications.
Used with standard shelvingunits to create economicalstarter and add-on units.
Used where maximum unitstability and integrity areindicated, as in, double deckcatwalk systems, flat topshelving, mezzanines orwhere seismic requirementsmust be met. The strongestin the industry.
Establishes basic unitstructure as well as formingfour-sided shelf support.
Provides greater capacitythan double rivet beams.
Reduced profile maximizesvertical clearance. Protects allshelf edges.
Lowest profile double rivetbeam provides basic structurewhile maximizing verticalspace.
May be used for intermediateshelves on models up to 4’wide where maximum use ofvertical space is important.
Stabilizes beams and addssupport for increased loadson double rivet type beams.
5/8” thick particle board standard. We also supply20 gauge flange metal shelves. Custom finishesavailable.
Model Definition
4 800-736-7225 � 626-333-7225
Height of unit in feetShelving typeShelf width in inchesShelf depth in inchesNumber of shelf levelsSupport tiesParticle board shelf includedAdd-on units
R, RZ and AS - (Bulk Rack Units) have four-sided double rivet shelf support. Suffix indicates various shelf configuratioins which increase shelf capacity.
RZ - Bulk rack unit utilizing Z beams.
H - Includes TS center support.
HC - Includes DRC beams across width and TS support.
HDC - Includes DRCHD beams across width and TS support.
T - Indicates use of an SSHD - center support.
Note: Utilize angled, heavy duty posts (APH) for seismic requirements. Consult your Rapid Rack representative.
7 S 3 6 12 - 6 H W / A
Introducing
Bridging the gap between standardshelving and pallet racks Rapid Rack’s Loadmaster Series is designed forthe hand loading of intermediate weightitems. This versatile rack system can be used forhundreds of storage applications. In additionto storing cartoned merchandise in shippingand receiving departments, it can be used todisplay furniture and department storeproducts, as well as for storage of medical anddietary supplies in hospitals. The LoadmasterSeries bridges the storage gap betweenstandard shelving and pallet rack, and is idealfor a wide range of manually loadedapplications.
by
5
Loadmaster racks by Rapid Rack are
stronger and have greater load capacity
than bolt-together units. Loadmaster racks are available in a number
of upright and load beam sizes, perfect for
supply or mail rooms, garages and other
small storage areas.Excellent for storing moderate weight
packages, boxes and bulky parts,Loadmaster racks are made of sturdy, high
quality materials which have made the
name Loadmaster synonymous with
excellence in the material handling industry.Loadmaster offers greater load capacities
than conventional shelving because of their
fully welded one-piece construction of all
uprights and load beams.
The wider loading areas, greater load
visibility and load accessibility from either
the front or back of the racks provides
optimum shelving utility for available
storage space.Easy installation puts the Loadmaster just
minutes away from use upon delivery. Wire,
plywood and particle board shelving panels
are available for varying load requirements. For special purpose types of storage, the
Rapid Rack engineering department will
evaluate your usage and spacerequirements and recommend an optimum
storage system to meet your needs.
Loadmaster
For ordering information, see page 24 � www. RapidRack.com
Loadmaster
Item Item type Weight
PBS-48L 48" Beam 6.93PBS-72L 72" Beam 9.99PBS-97L 97" Beam 13.18
PB47.522.19L 24" x 48" x 5/8" Particle Board 16.1PB47.534.19L 36" x 48" x 5/8" Particle Board 24.81PB47.540.19L 42" x 48" x 5/8" Particle Board 29.17 PB47.546.19L 48 x 48 x 5/8 Particle Board 33.52 PB71.522.19L 24 x 72 x 5/8 Particle Board 24.24 PB71.534.19L 36 x 72 x 5/8 Particle Board 24.24 PB71.540.19L 42 x 72 x 5/8 Particle Board 43.9 PB71.546.19L 48 x 72 x 5/8 Particle Board 50.46 PB9622.19L 24 x 96 x 5/8 Particle Board 32.55 PB9634.19L 36 x 96 x 5/8 Particle Board 50.15 PB9640.19L 42 x 96 x 5/8 Particle Board 58.95 PB9646.19L 48 x 96 x 5/8 Particle Board 67.75
TSFB24L 24" Tie Support 1.97 TSFB36L 36" Tie Support 2.91 TSFB42L 42" Tie Support 3.38 TSFB48L 48" Tie Support 3.85
Item Item type WeightP-2472L 24 x 72 Upright 25.09 P-3672L 36 x 72 Upright 27.54 P-4272L 42 x 72 Upright 28.82 P-4872L 48 x 72 Upright 30.17P-2496L 24 x 96 Upright 33.72P-3696L 36 x 96 Upright 36.52 P-4296L 42 x 96 Upright 38.04 P-4896L 48 x 96 Upright 39.68 P-24120L 24 x120 Upright 41.16 P-36120L 36 x120 Upright 44.84 P-42120L 42 x120 Upright 46.53 P-48120L 48 x120 Upright 48.52
WD-2436L Wire Decking 12 WD-3636L Wire Decking 18 WD-4236L Wire Decking 21 WD-4836L Wire Decking 24 WD-2448L Wire Decking 16 WD-3648L Wire Decking 28 WD-4248L Wire Decking 28 WD-4848L Wire Decking 32
Capacity ChartBeam size Particle Board or Wire deck97" 1500 lb using 4 tie supports72" 1500 lb using 3 tie supports48" 1500 lb using 2 tie supportsAbove criteria is based on an allowable beam deflection criteria of L / 180
Post CL to CL = Beam Length + 2 1/2”
6 800-736-7225 � 626-333-7225800-736-7225 � 626-333-7225
7
Space Saver
• Uses single rivet beams for maximum vertical space
• Shelf sizes up to 48" x 36"
• Shelves adjustable on 1 1/2" centers
• Various sizes and shelf capacities available
• No diagonal brace allows double entry access
• Boltless construction
• Assembles in minutes
• See Capacity Chart, page 29
Versatile and efficient — Provides multiple shelfstorage to maximize storage
6 shelves
STARTER UNITS
7 shelves
8 shelves
9 shelves
Colors available
— Gray
— Tan
— Putty
— Black
Add-onunits
available
For ordering information, see page 24 � www. RapidRack.com
6’ width
With the use of Rapid Rack Tee posts you can combine add-on units with individualSpace Saver units to arrange economical rows of shelving. Start each row with a SpaceSaver unit and join the desired number of add-on units to complete the row.
EXAMPLE: 1 Starter unit and 2 Add-Ons
Angle posts from starter unit are usedat each end of the row. DRBs arerequired on top and bottom levels forrigidity.
NOTES:1) When shelving
structure must conformto seismicrequirements, consultyour Rapid Rackrepresentative forassistance.
2) Intermediate shelveswhich exceed 24" deepmust include SRBbeams across depth.
3) Particle board deckingavailable, cut to size.
4) For Add-on units, addsuffix "A".
Space Saver
See Capacity Chart, page 29
8 800-736-7225 � 626-333-7225
Starter unit Model no. W x D x H Add-on unit Model 7S 3612-6 36" x 12" x 84" 7S 3612-6A7S 3618-6 36" x 18" x 84" 7S 3618-6A7S 3624-6 36" x 24" x 84" 7S 3624-6A
6 7S 3636-6 36" x 36" x 84" 7S 3636-6Ashelves 7S 4812-6 48" x 12" x 84" 7S 4812-6A
7S 4818-6 48" x 18" x 84" 7S 4818-6A7S 4824-6 48" x 24" x 84" 7S 4824-6A7S 4836-6 48" x 36" x 84" 7S 4836-6A
7S 3612-7 36" x 12" x 84" 7S 3612-7A7S 3618-7 36" x 18" x 84" 7S 3618-7A7S 3624-7 36" x 24" x 84" 7S 3624-7A
7 7S 3636-7 36" x 36" x 84" 7S 3636-7Ashelves 7S 4812-7 48" x 12" x 84" 7S 4812-7A
7S 4818-7 48" x 18" x 84" 7S 4818-7A7S 4824-7 48" x 24" x 84" 7S 4824-7A7S 4836-7 48" x 36" x 84" 7S 4836-7A
7S 3612-8 36" x 12" x 84" 7S 3612-8A7S 3618-8 36" x 18" x 84" 7S 3618-8A7S 3624-8 36" x 24" x 84" 7S 3624-8A
8 7S 3636-8 36" x 36" x 84" 7S 3636-8Ashelves 7S 4812-8 48" x 12" x 84" 7S 4812-8A
7S 4818-8 48" x 18" x 84" 7S 4818-8A7S 4824-8 48" x 24" x 84" 7S 4824-8A7S 4836-8 48" x 36" x 84" 7S 4836-8A
7S 3612-9 36" x 12" x 84" 7S 3612-9A7S 3618-9 36" x 18" x 84" 7S 3618-9A7S 3624-9 36" x 24" x 84" 7S 3624-9A
9 7S 3636-9 36" x 36" x 84" 7S 3636-9Ashelves 7S 4812-9 48" x 12" x 84" 7S 4812-9A
7S 4818-9 48" x 18" x 84" 7S 4818-9A7S 4824-9 48" x 24" x 84" 7S 4824-9A7S 4836-9 48" x 36" x 84" 7S 4836-9A
9
• Shelf sizes up to 96" x 48".
• Shelves adjustable on 1 1/2" centers.
• Heights to 15' available.
• Various sizes and shelf capacities available.
• May be expanded into a catwalk system when usedwith APH heavy duty posts. Consult your Rapid Rackrepresentative for assistance.
• See Capacity Chart, page 29.
Bulk Storage
48' width
Starter units
60” width
72” width
96” width
Add-onunits
available
Uses double rivet beamsfor high capacity
Colors available
— Gray
— Tan
— Putty
— Black
For ordering information, see page 24 � www. RapidRack.com
10 800-736-7225 � 626-333-7225
Bulk Storage
With the use of RapidRack Tee posts you cancombine add-on unitswith individual BulkStorage units to arrangeeconomical rows ofshelving. Start each rowwith a Bulk Storage unitand join the desirednumber of add-on unitsto complete the row.
EXAMPLE: 1 Starter unitand 2 Add-ons.
Angle posts from starterunit are used at eachend of the row. DRB'sare required on top andbottom levels forrigidity.
NOTES:1) When shelving structure must
conform to seismic requirements,consult your Rapid Rackrepresentative for assistance.
2) Particle board decking available,cut to size.
Starter unit Model no. W x D x H Add-on unit Model no. 7R 4818-4 7R 4818-4A7R 4818-4H 48" x 18" x 84" 7R 4818-4HA7R 4824-4 7R 4824-4A7R 4824-4H 48" x 24" x 84" 7R 4824-4HA7R 4836-4 7R 4836-4A7R 4836-4H 48" x 36" x 84" 7R 4836-4HA7R 4848-4 7R 4848-4A7R 4848-4H 48" x 48" x 84" 7R 4848-4HA
7R 6018-4 7R 6018-4A7R 6018-4H 60" x 18" x 84" 7R 6018-4HA7R 6024-4 7R 6024-4A7R 6024-4H 60" x 24" x 84" 7R 6024-4HA7R 6036-4 7R 6036-4A7R 6036-4H 60" x 36" x 84" 7R 6036-4HA7R 6048-4 7R 6048-4A7R 6048-4H 60" x 48" x 84” 7R 6048-4HA
7R 7218-4 7R 7218-4A7R 7218-4H 7R 7218-4HA7R 7218-4HC 72" x 18" x 84" 7R 7218-4HCA 7R 7224-4 7R 7224-4A7R 7224-4H 7R 7224-4HA7R 7224-4HC 72" x 24" x 84" 7R 7224-4HCA7R 7236-4 7R 7236-4A7R 7236-4H 7R 7236-4HA7R 7236-4HC 72" x 36" x 84" 7R 7236-4HCA7R 7248-4 7R 7248-4A7R 7248-4H 7R 7248-4HA7R 7248-4HC 72" x 48" x 84" 7R 7248-4HCA
7R 9618-4 7R 9618-4A7R 9618-4H 7R 9618-4HA7R 9618-4HC 96" x 18" x 84" 7R 9618-4HCA7R 9624-4 7R 9624-4A7R 9624-4H 7R 9624-4HA7R 9624-4HC 96" x 24" x 84" 7R 9624-4HCA7R 9636-4 7R 9636-4A7R 9636-4H 7R 9636-4HA7R 9636-4HC 96" x 36" x 84" 7R 9636-4HCA7R 9648-4 7R 9648-4A7R 9648-4H 7R 9648-4HA7R 9648-HC 96" x 48" x 84" 7R 9648-4HCA
48”width
60”width
72”width
96”width
See Capacity Chart on page 29
800-736-7225 � 626-333-7225
• Record archive bulk storage specially designed for record retention.
• Various sizes utilize shelf openings completely.
• Uses double rivet beams for high capacity.
• Wide span capability.
• Shelves adjustable on 1 1/2" centers.
• Shelf sizes up to 69" x 30” are standard.
• Heights to 15' 1 1/2" available.
• Single or double entry units allow complete accessibility.
• Boltless construction, easy assembled.
• May be expanded into a catwalk system when usedwith APH heavy-duty posts. Consult your Rapid Rack
representative for assistance.
Single or double entryunits allows quick document retrieval
Record Archive
4 shelves
Starterunits
5 shelves
7 shelves
8 shelves
11
Bulk Storage
Colors available
— Gray
— Tan
— Putty
— Black
Add-onunits
available
For ordering information, see page 24 � www. RapidRack.com
SUFFIX BEAM TYPE None DRB (Double Rivet Beam)H DRB w/ TS SupportS APH Heavy-Duty Post (seismic applications)
NOTES:1) Box size used: 13" width, 16 3/4" depth, 10 1/2" height. Capacity based on approximate box weight of 35 lbs. per box.2) When shelving structure must conform to seismic requirements, consult your Rapid Rack representative for assistance. 3) Ask your Rapid Rack representative for assistance in designing a specific system to fit your needs. 4) Particle board decking available, cut to size.
Starter Unit Model no. W x D x H Openings # Boxes
7AS 4215-4 42" x 15" x 84" 3 24
4 7AS 4230-4 42" x 30" x 84" 3 48
shelves 7AS 6915-4 69" x 15" x 84" 3 40
7AS 6930-4H 69" x 30" x 84" 3 80
9AS 4215-5 42" x 15" x 105" 4 30
5 9AS 4230-5 42" x 30" x 105" 4 60
shelves 9AS 6915-5 69" x 15" x 105" 4 50
9AS 6930-5 69" x 30" x 105" 4 100
13AS 4215-7 42" x 15" x 156" 6 42
7 13AS 4230-7 42" x 30" x 156" 6 84
shelves 13AS 6915-7 69" x 15" x 156" 6 70
13AS 6930-7H 69" x 30" x 156" 6 140
15AS 4215-8 42" x 15" x 181 1/2" 7 48
8 15AS 4230-8 42" x 30" x 181 1/2" 7 96
shelves 15AS 6915-8 69" x 15" x 181 1/2" 7 80
15AS 6930-8H 69" x 30" x 181 1/2" 7 160
Record Archive
800-736-7225 � 626-333-722512
13
• Shelf sizes up to 72" x 48".
• Shelves adjustable on 1 1/2" centers.
• Standard heights to 15' available.
• 'Z' Beam construction provides protection for all shelf edges.
• Increases vertical storage.
• May be expanded into a catwalk system when used with APHheavy duty posts. Consult your Rapid Rack representative forassistance.
Uses Double Rivet ‘Z’ Beams for highcapacity and reducedprofile
‘Z’-Beam
Colors available
— Gray
— Tan
— Putty
— Black
For ordering information, see page 24 � www. RapidRack.com
800-736-7225 � 626-333-722514
48"width 7RZ 4818-4 48" x 18" x 84" 48” width 7RZ 4818-4A
7RZ 4824-4 48" x 24" x 84" 7RZ 4824-4A7RZ 4824-4T 7RZ 4824-4TA
7RZ 4836-4 48” x 36” x 84” 7RZ 4836-4A7RZ 4836-4T 7RZ 4836-4TA
7RZ 4848-4 48” x 48” x 84” 7RZ 4848-4A7RZ 4848-4T 7RZ 4848-4TA
60"width 7RZ 6018-4 60" x 18" x 84" 60” width 7RZ 6018-4A
7RZ 6024-4 60" x 24" x 84" 7RZ 6024-4A7RZ 6024-4T 7RZ 60244TA
7RZ 6036-4 60” x 36” x 84” 7RZ 6036-4A7RZ 6036-4T 7RZ 6036-4TA
7RZ 6048-4 60” x 48” x 84” 7RZ 6048-4A7RZ 6048-4T 7RZ 6048-4TA
72"width 7RZ 7218-4 72" x 18" x 84" 72” width 7RZ 7218-4A
7RZ 7224-4 72" x 24" x 84" 7RZ 7224-4A7RZ 7224-4T 7RZ 7224-4TA
7RZ 7236-4 72” x 36” x 84” 7RZ 7236-4A7RZ 7236-4T 7RZ 7236-4TA
7RZ 7248-4 72” x 48” x 84” 7RZ 7248-4A7RZ 7248-4H 7RZ 7248-4TA
Starter unit Model no. W x D x H Add-on unit Model no.
With the use of Rapid Rack Tee posts you can combine add-on unitswith individual 'Z' Beam units to arrange economical rows of shelving.Start each row with a 'Z' Beam unit and join the desired number ofAdd-On units to complete the row.
EXAMPLE: One starter unit and twoadd-ons. Angle postsfrom Starter unit areused at each end of therow.
SUFFIX BEAM TYPENone DRBZ (Double rivet ‘Z’ Beam)T DRBZ with SSHD supportA Add-on unit
NOTES:1) When shelving structure must conform to seismic requirements, consult your Rapid Rack representative for
assistance. 2) Particle board decking available, cut to size.
‘Z’ Beam Profile — 12" to 72" lengths
‘Z’-BeamAdd-on units available
See Capacity Chart, page 29
1515
Steel Shelving
• 20 ga. US. steel
• 1.5 mil premier DuPont®
powder coating
• 15/16" face front
• Manufactured in USA
A premier line ofSteel ShelvingProducts —available in
numerous sizesand shapes
MS20-3612MS20-3618MS20-3624
MS20-4212MS20-4218MS20-4224
MS20-4812MS20-4818MS20-4824
36 x 12 175 lbs36 x 18 175 lbs36 x 24 175 lbs
42 x 12 150 lbs42 x 18 150 lbs42 x 24 150 lbs
48 x 12 150 lbs48 x 18 150 lbs48 x 24 150 lbs
36" x 12" 275 lbs 400 lbs 500 lbs36" x 18" 250 lbs 400 lbs 500 lbs36" x 24" 225 lbs 400 lbs 500 lbs
42" x 12" 250 lbs 400 lbs 500 lbs42" x 18" 225 lbs 400 lbs 500 lbs42" x 24" 200 lbs 400 lbs 500 lbs
48" x 12" 225 lbs 400 lbs 500 lbs48" x 18" 200 lbs 400 lbs 500 lbs48" x 24" 175 lbs 400 lbs 500 lbs
36" x 12" 200 lbs 300 lbs (TSFB12MS)36" x 18" 200 lbs 300 lbs (TSFB18MS)36" x 24" 200 lbs 300 lbs (TSFB24MS)
42" x 12" 175 lbs 250 lbs (TSFB12MS)42" x 18" 175 lbs 250 lbs (TSFB18MS)42" x 24" 175 lbs 250 lbs.(TSFB24MS)
48" x 12" 150 lbs 200 lbs (TSFB12MS)48" x 18" 150 lbs 200 lbs (TSFB18MS)48" x 24" 150 lbs 200 lbs (TSFB24MS)
• Shelf 20 ga. cold-rolled USsteel 15/16" face
• Center support 14 ga.,U-channel shape1.5" x 3/4"
TSFB12MSTSFB18MSTSFB24MS
TSFBXXMS Center Support
Shelf size Metal clip
Shelf Size DRBZ/DRBZR/ Plus 1 Tie Plus 2 TiesDRB/DRBTLL
Shelf Size SRB Plus 1 Tie
Part numbers
Colors available
— Gray
— Tan
— Putty
— Black
For ordering information, see page 24 � www. RapidRack.comREV: 2.19.10
16 800-736-7225 � 626-333-7225
Profile Series
Unique beam design for highcapacity and added clear space
• Uses 16 ga. SRBTLL/DRBTLL/DRBZ16R for high capacity / reduced profile
• Shelf sizes up to 48" x 48"
• Shelves adjustable on 1 1/2" centers
• Standard heights to 8' available
• Heavy duty construction provides protection for DRBZ16R and SRBTLLshelf edges
Corner cutawayshowing the newreduced ‘Z’ Beam.
16
DRBZ16R
SRBTLL
DRBTLL
DRBZ16R
Colors available
— Gray
— Tan
— Putty
— Black
For ordering information, see page 24 � www. RapidRack.com 1717
Profile Series
Profile Series Upright Post14 gauge — width 1-1/4" x 1-1/4"
APTL3 36" 1.84 lbsAPTL4 48" 2.46 lbsAPTL5 60" 3.07 lbsAPTL6 72" 3.69 lbsAPTL7 84" 4.30 lbsAPTL8 96" 4.92 lbs
Profile Series Tee Post14 gauge — 1-1/4" x 2-3/4"
TPTL3 36" 3.81 lbsTPTL4 48" 5.08 lbsTPTL5 60" 6.35 lbsTPTL6 72" 7.63 lbsTPTL7 84" 8.90 lbsTPTL8 96" 10.17 lbs
Profile Series Single Rivet Beam16 gauge — 1” height
Use as left to right or front to back
SRBTLL24 24" 0.78 lbsSRBTLL30 30" 0.98 lbsSRBTLL36 36" 1.17 lbsSRBTLL42 42" 1.37 lbsSRBTLL48 48" 1.56 lbs
Profile Series Double Rivet Beam16 gauge — 2-3/4" height , 3/4" flangeUse as left to right or front to back
DRBTLL12 12" 0.69DRBTLL15 15" 0.85DRBTLL18 18" 1.02DRBTLL24 24" 1.35DRBTLL30 30" 1.69DRBTLL36 36" 2.03DRBTLL42 42" 2.37DRBTLL48 48" 2.71
Profile Series ‘Z’ Beam16 gauge — 2-1/8" height, 1/2" flangeUse as left to right or front to back
DRBZ16R12 12" 0.58DRBZ16R15 15" 0.72DRBZ16R18 18" 0.87DRBZ16R24 24" 1.16DRBZ16R30 30" 1.45DRBZ16R36 36" 1.74DRBZ16R42 42" 2.04DRBZ16R48 48" 2.33
Profile Series Tie Support16 gauge — 2-1/2" height, 1/2" flange
Use to stabilize DRBTLL Beam & add support
TSL24 24" 1.50 lbsTSL30 30" 1.83 lbsTSL36 36" 2.17 lbsTSL48 48" 2.85 lbs
Part No. Height Weight
Part No. Height Weight
Part No. Height WeightPart No. Height Weight
Part No. Height Weight
Part No. Height Weight
18 800-736-7225 � 626-333-722518
Automotive Storage
Battery Racks
• Provides automatic first-in/first-out storage.
• Versatile — Easily adjusted to various battery sizes.
• Efficient — Improved inventory control. Provides easy access for thecustomer.
• Easy to assemble — Unit assembles in minutes. Contains roller strips toprovide a strong long life unit.
Available in avariety of sizes tohold from 80-120batteries.
Available in 2-tier to 6-tier unitsthat hold up to 48 standard
unmounted passenger car tires.With add-on units, racks
hold up to 96 tires.
Tire Storage Racks
• Uses double rivet tire support beams for high capacity.
• Single entry or double entry racks allow complete accessibility.
• Storage width of 5', standard heights to 15' available.
• Up to 6 adjustable levels of tire storage.
• Racks for specialty tire and complete catwalk systems available.
• APH heavy-duty posts available for seismic requirements. Consultyour Rapid Rack representative for assistance.
For ordering information, see page 24 � www. RapidRack.com 19
NOTES:1) When shelving structure must
conform to seismic requirements,consult your Rapid Rackrepresentative for assistance.
2) Particle board decking available,cut to size.
Automotive Storage
*Based on averagepassenger car batteries
**Capacity is based on standard unmounted passenger car tires
Unit Depth Model no. W x D x H # Batteries*44 4 wide 36" depth RBR-34 48" x 36" x 72" 80
6 wide 36" depth RB-36 48" x 36" x 72" 96
4 wide 48” depth RBR-44 48" x 48" x 72" 112
6 wide 48" depth RBR-46 48" x 48" x 72" 120
Battery Racks
Tire Storage RacksNon-seismic requirements — Utilizing AP posts
Single entry Double entry
TR2S Starter 2 60” x 21” x 60” 16 DTR2S Starter 2 60” x 42” x 60” 32TR2A Add-on DTR2A Add-on
TR3S Starter 3 60” x 21” x 84” 24 DTR3S Starter 3 60” x 42” x 84” 48TR3A Add-on DTR3A Add-on
TR4S Starter 4 60” x 21” x 120” 32 DTR4S Starter 4 60” x 42” x 120” 64TR4A Add-on DTR4A Add-on
TR5S Starter 5 60” x 21” x 144” 40 DTR5S Starter 5 60” x 42” x 144” 80TR5A Add-on DTR5A Add-on
TR6S Starter 6 60” x 21” x 180” 48 DTR6S Starter 6 60” x 42” x 180” 96TR6A Add-on DTR6A Add-on
Seismic zones — Utilizing APH postsSingle entry Double entry
TR2S/S Starter 2 60” x 21” x 60” 16 DTR2S/S Starter 2 60” x 42” x 60” 32TR2A/S Add-on DTR2A/S Add-on
TR3S/S Starter 3 60” x 21” x 84” 24 DTR3S/S Starter 3 60” x 42” x 84” 48TR3A/S Add-on DTR3A/S Add-on
TR4S/S Starter 4 60” x 21” x 120” 32 DTR4S/S Starter 4 60” x 42” x 120” 64TR4A/S Add-on DTR4A/S Add-on
TR5S/S Starter 5 60” x 21” x 144” 40 DTR5S/S Starter 5 60” x 42” x 144” 80TR5A/S Add-on DTR5A/S Add-on
TR6S/S Starter 6 60” x 21” x 180” 48 DTR6S/S Starter 6 60” x 42” x180” 96TR6A/S Add-on DTR6A/S Add-on
Model no. Type Tiers W x D x H Cap** Model no. Type Tiers W x D x H Cap**
Model no. Type Tiers W x D x H Cap** Model no. Type Tiers W x D x H Cap**
20 800-736-7225 � 626-333-722520
Mobile Aisle Systems
• Expandable
• Maximize cubic storagespace
• Pick and replenish stockwith ease
• Sections slide with minimaleffort
Reliable,low-maintenance
track system
For ordering information, see page 24 � www. RapidRack.com 21
Properly leveled tracks provide greatestease in carriage movement. Best resultsare achieved when “out of level” floorconditions do not exceed 3/16" in 10 feet.
Recommended carriage capacity 2,500 lbs.combined shelving and product load.
Floor track and accessories
MT Mobile track (Ln ft) 1.50
AT-TRACK Anti-tip track (Ln ft) 1.00
RMC-STOP End stops 0.06
RMC-BUMPER Bumper 0.40
T-ANCHOR-1 Anchors - 1/4” x 1 3/4” 0.03
T-ANCHOR-2 Anchors - 1/4” x 2” 0.04
RMC-SB-36 Safety bar 1.40
RMC-SB-42 Safety bar 1.60
MC-BRAKE Brake 1.70
RMC-HDL-24 Handle 3.00
RMC-HDL-30 Handle 3.50
RMC-HDL-36 Handle 4.00
RMC-HDL-42 Handle 4.50
RMC-HDL-48 Handle 5.00
Standard carriage sizes
RMC-3624 36 x 24 18.4RMC-3630 36 x 30 20.8RMC-3636 36 x 36 23.2
RMC-4824 48 x 24 20.8RMC-4830 48 x 30 23.2RMC-4836 48 x 36 25.6
RMC-6024 60 x 24 23.2RMC-6030 60 x 30 25.6RMC-6036 60 x 36 28.0
RMC-7224 72 x 24 31.2RMC-7230 72 x 30 34.5RMC-7236 72 x 36 38.4
RMC-8424 84 x 24 33.6RMC-8430 84 x 30 37.2RMC-8436 84 x 36 40.7
RMC-9624 96 x 24 36.0RMC-9630 96 x 30 39.6RMC-9636 96 x 36 43.2
RMC-10824 108 x 24 38.4RMC-10830 108 x 30 42.0RMC-10836 108 x 36 45.6
RMC-12024 120 x 24 40.8RMC-12030 120 x 30 44.4RMC-12036 120 x 36 48.0
Stock no. Description Weight (lbs.)
Model no. Size Weight (lbs.)
Mobile Aisle Systems
22 800-736-7225 � 626-333-722522
• Handrails of welded construction
• Easy to install
• Non-skid treads
• Available in various sizes
• Includes mounting bracket and hardware
• Seismic and non-seismic available uponrequest.
Contact your local RapidRack representative forbuilding code application
Easy accessto upper levels — sturdy
and easy to install
Traction anddurability
• Maintenance-free
• Non-Skid Surface
• ApplicationsMezzanine DecksCatwalksStair TreadsPlatforms
Notes:1) In all cases aminimum safetyfactor of 2 hasbeen used.2) Deflections atrated load donot exceedL/240 ofunsupportedspan.
SpecificationsMaterial: 16 gauge galvanized steel
Weight: 2.6 pounds per running foot
Mounting: Holes for 5/16" bolts at 6"increments in both vertical andhorizontal flanges allows for avariety of fastening methods
Dimensions: Width: 9"Height: 1 1/2"Lengths: 30", 36", 42", 48",
60", 120", 144"Special lengths available on request.Consult your Rapid Rack Factoryrepresentative.
CapacitiesUnsupported span
Description 36” 48” 60”
Concentrated 380 lbs. 300 lbs. 240 lbs.point load*
Distributed 800 lbs. 530 lbs. 330 lbs.Load
Equivalent 350 lbs. 180 lbs. 90 lbs.unit load per sq. ft. per sq. ft. per sq. ft.
* Concentrated point load means a loadconcentrated on an area no less than 6" square
RapidGrateSteel Decking
Stairways
23
CatwalkdesignconsiderationsFor preliminary design of a catwalk system the following must beconsidered:
• Adequate height • Catwalk loads• Shelf sizes and capacity • Stairway access• Number of shelves per unit • Obstructions (columns)aisles
Bulk Rack Design provides wider spansof uninterrupted storage with greatershelf weight capabilities.
Space Saver Design providesmultiple shelf levels ideal forsmall parts storage.
23
Catwalks
A multi-level catwalkallows you to expandupward, not outward
• One-piece upright posts.
• Boltless construction.
• Shelves adjustable on 1 1/2" centers.
• Access to all storage levels.
• Rigid connections provide solid support fordecking.
• Unit widths up to 72".
• APH posts — "The Strongest in the Industry".
• Designed to meet individual requirements.
• Specially designed and engineered to complywith seismic zones and local building codes.Consult your Rapid Rack representative forassistance.
For ordering information, see page 24 � www. RapidRack.com
24 800-736-7225 � 626-333-722524
Rapid Rack warrants its products tobe free from defects in material
and workmanship for:
• Ten years — LoadmasterTM
brand products
• Five years — Rapid RackTM brandproducts
• One year — TrimlineTM brand products
Warranty void if product is subject to misuse, abuse, alteration or accident, if used for other thandesignated purpose, or if maximum load capabilities are exceeded.
The warranty is non-transferable, it does not cover chipping, flaking, scratches, rust , dents, orother damage to finish or surface of products.
Responsibility of Rapid Rack Industries, Inc., is limited to repair or replacement of the product.Rapid Rack Industries, Inc. is not responsible for any consequential, incidental or other damagesor losses resulting from product failure.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDINGTHE WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOMESTATES DO NOT ALLOW EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, INCIDENTALOR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THISWARRANTY GIVES YOU SPECIFIC LEGAL RIGHTSWHICH VARY FROM STATE TO STATE.
Damage in transit
For your protection,examine each shipment carefully. If there is any evidence of damage orshortage in transit, insist that the delivering carrier make appropriate notation on the freight billbefore you sign it. If concealed damage is discovered after receipt of shipment, immediately notifythe carrier, requesting an inspection report to support your claim.Any claim for damage in transitmust be filed with the delivering carrier. Rapid Rack Industries, Inc. will not acceptreturn of merchandise damaged in transit. Your recourse is with the delivering carrier.
Memberships and standards
Terms & Conditions:Prices: All prices are per unit shipped K.D. (unless otherwise specified) F.O.B.factory; City of Industry, CA. Prices subject to change without notice, and do notinclude federal, state or local taxes.
Shipments: Unless a prefered routing is specified on your order, shipments willbe made the best way, with transporation charges collect.
Terms: Net 30 days — subject to credit approval. Past due accounts are subjectto a finance charge of 1.5% per month (18% per annum).
Specifications:Weights capacities and other specifications are for informationonly and are subject to change without notice.
Finish: Standard powder coat colors are tan or gray and must be specified onyour order. Other colors are available subject to extended shipment dates andadditional paint charges. Anything over 97” will be finished in water-basedbaked-on enamel.
Orders: By definition, an entered order indicates a single purchase order to beshipped at one time to one destination.Additions or revisions are considered neworders and may be subject to extended ship dates.
Special orders: Not subject to cancellation or return.
Engineering: Engineering data and drawings are available — contact yourRapid Rack representative for details.
Returned merchandise: No goods are to be returned without factoryauthorization. A handling charge of 25% will be made for all returnedmerchandise.
10 � 5 � 1Limited
WarrantyIndustryLeader
Colors to choose from
Call our factory to inquire aboutcustom colors
Gray No upchargeStandard stocked color
Tan No upchargeStandard stocked color
Putty No upchargeStandard non-stockedcolor
Black No upchargeStandard non-stockedcolor
Call 800-736-722
5
Fax 626-333-5265
Online:
www.RapidRack.com
Contact Customer Service Direct1-888-503-8218
For ordering information, see page 24 � www. RapidRack.com 2525
Slotted AnglesSeries 225 Slotted Angle
Series 300 Slotted Angle
REV: 2.19.10
26 800-736-7225 � 626-333-7225
Rapid Rack ComponentsAngle post
Heavy-duty angle post
Tee post
Single rivet beam
Heavy duty single rivet beam
Fixed ‘Z’ beam shelf support
Double rivet channel beam
Double rivet beam
Heavy duty double rivetchannel beam
Double rivet ‘Z’ beam
Heavy-duty low profiledouble rivet beam
1” height, 14 gauge. Used on 48” or longer ‘Z’beams to provide fixed position shelf support.
Part No. Length HeightZTS 24 24" 1.4 lbs.ZTS 30 30" 1.8 lbs.ZTS 36 36" 2.3 lbs.
Part No. Length WeightZTS 42 42" 3.1 lbs.ZTS 48 48" 3.6 lbs.
For ordering information, see page 24 � www. RapidRack.com 2727
Rapid Rack ComponentsDecking support channel
Heavy duty deck channel
Tire support beam
Rivet tab hang bar
Reel cradle, welded
Wall tie
Tie pins
Double tie
Tie plate
Low profile shelf support
‘Z’ beam shelf support
Support tie
Deck filler panel
Rapidgrate steel decking
Stock No: TP Weight: 0.3 Stock No: TT Weight: 0.15
28 800-736-7225 � 626-333-722528
Rapid Rack ComponentsAisle spacer
Double rivet cleat
Shelf panel supports
Divider beam
File divider
Sliding divider*
Round hang bar
Tire rack cleat
Slotted angle cleatUsed in various places where slotted anglepieces must be joined, as in aisles for decksupport.
Splice kits, single
Splice kits, double
Riveted swing foot plates
Double rivetslotted angle cleat
Used to secure AP or APH angle posts to the floor.No hardware required to attach to angle posts.
Stock No. WeightRS-FPSR Single right 0.3RS-FPSL Single left 0.3
Foot platesStock No. WeightFPSR Single Right .3FPSL Single Left .3FPD Double .6
For ordering information, see page 24 � www. RapidRack.com 2929
Capacity Chart
Note: These shelf capacities are based on Uniformly Distributed Loads (UDL)
DRBTLLSRBTLLDRBTLLSRBTLLDRBTLLSRBTLL
DRBTLL-TSLSRBTLL
DRBTLL-TSLSRBTLLDRBTLLSRBTLL120
1000
Profile Series
30 800-736-7225 � 626-333-722530
Key Rack Components
Part No. Length3UR 36"6UR 72"7UR 84"8UR 96"10UR 120"12UR 144"15UR 180"
Part No. Length4CLR 48"5CLR 60"6CLR 72"7CLR 84"8CLR 96"
Part No. Length3LRSR 36"3.5LRSR 42"4LRSR 48"
Part No. Length4CLR 48"5CLR 60"6CLR 72"7CLR 84"8CLR 96"
Part No.FPSR Single RightFPSL Single Left
Part No. LengthFB12 12"FB15 15"FB18 18"FB24 24"FB30 30"FB32 32"FB36 36"FB42 42"FB48 48"FB60 60"
Part No. LengthFBSR12 12"FBSR18 18"FBSR24 24"FBSR30 30"FBSR36 36"FBSR42 42"FBSR48 48"
Part No. LengthSTS12 12"STS18 18"STS24 24"STS30 30"STS32 32"STS36 36"STS42 42"STS48 48"
Part No. Length Weight6CLRHD 72" 11.5 lbs.7CLRHD 84" 13.1 lbs.8CLRHD 96" 15.0 lbs.
Part No. RIV-TP
1 11/16” x 2 1/4”, 14 gauge,punched on 1 1/2” centers forshelf adjustments.
2 11/16” height, 14 gauge.Use as front to back shelfsupports and for structuralintegrity.
15/16” height, 14 gauge. Use asfront to back shelf supports withleft to right single rivet shelfsupports.
2 1/2” height, 14 gauge.Shelf deck support,connects between LRs tostabilize beams andsupport decking.
3” height, 11 gauge. Use as left toright shelf supports. Provides greatercapacity than 14 gauge CLR beams.
2 11/16”, 14 gauge. Use as left toright shelf supports and forstructural integrity
15/16”, 14 gauge. Use as left toright shelf supports.
2 7/8”, 14 gauge. Use as left to right shelfsupports. Provides greater capacity thanLR beams.
Used to connect side by side units ensuringrow alignment and structural integrity.
Used to secure uprights to floor.Requires hardware.
Upright angle
Left to right beam*
Front to back beam
Frontto backsingle rivet beam
Left to rightchannel beams*heavy duty
Shelf tiesupport
Left to rightsingle rivet beam
Left to rightchannel beam*
Tie plate
Foot plates
*Note: LR, CLR, and CLRHD beams 48" and longer are riveted for boltlessSTS connection. Beams 48" - 60", allow for one support. Beams 69" -96", allow for up to three supports.
Key Rack Components
For ordering information, see page 24 � www. RapidRack.com 31
Part No. Length3TLR 36"4TLR 48"5TLR 60"
Part No. LengthWT9 9"
Part No. LengthAS30 30 1/2"AS36 36 1/2"AS42 42 1/2"AS48 48 1/2"
Part No. LengthG3 36"G4 48"G5 60"G10 120"G12 144"Rapidgrate Splice BarG-SPL 12"
Part No. LengthHB36R 36"HB42R 42"HB48R 48"HB60R 60" Part No. Length
225-120 120"225-144 144"
Part No. LengthGSC36 36"GSC48 48"GSC60 60"GSC69 69"GSC72 72"
Part No. LengthDT15 15"DT18 18"
Part No.DRSACR Right HandDRSACL Left Hand
Part No. SSAC
Part No. Length300-144 144"
Part No. L x WDF236 36" x 2"DF248 48" x 2"DF336 36" x 3"DF348 48" x 3"DF3120 120" x 3"DF3144 144" x 3"
Part No.TRR Right HandTRL Left Hand
Used in various places where slotted anglepieces must be joined, as in aisle for decksupports.
2 11/16” height, 14 gauge. Use as left toright support. Helps cradle tires orwheels.
Economical method of utilizing a singleupright to adjoin an additional section.
2 1/2” height, 14 gauge. Use to space backto back shelving units & double entry tireracks.
3” height, 11 gauge. Supports steel decking inmezzanine and catwalk systems.
3 1/8” height, 1 5/8” width, 12 gauge.
2 1/4” height, 1 5/8” width, 14 gauge.
1 1/2” height, 16 gaugegalvanized steel, 2” and 3”wide. Use to fill spaces indecking and catwalk systems.
2 1/2” height, 14 gauge. Used to spaceshelving units off wall & single entry tireracks.
2 1/2” height, 14 gauge. Use betweenrows of shelving to space aisle to aconstant dimension.
1 1/2” height, 9” width, 16 gauge.Galvanized steel decking for catwalksand mezzanines.
1 1/8” x 1” O.D. x 14 gauge. Providesinterior hanging storage for various parts.One or more per level supported by DRBbeams.
Enables rivet connection between postswhen bolted to lengths of slotted angle.Creates nonstandard size of aisle andcross aisle supports.
LEFT
Splice kit singlePart No.UR-SPLUsed to extendheight ofsingle uprights.Complete withhardware.
Splice kit double
Part No.UR-DPLUsed to extendheight of doubleuprights. Completewith hardware.
Tire supportbeam
Tire rack cleat
Doubletie
Grating supportchannel
Deck fillerpanel
Slotted angle cleat
Walltie
Aisle spacer
Rapidgratesteel decking
Hang bar
Double rivet slotted angle cleat
Slottedangle
RIGHT
32 800-736-7225 � 626-333-7225
For floor plan growth, clear width, beam profiles and clear vertical openings
When designing aRapid Rack shelvinglayout, unit growthmust be considered.Units have 1/2”growth: whenconnecting adjoiningunits add 1/4”*
* RIV-TP (tie plates)recommended for bulkrack for row alignmentand structural integrity.
Unit clear width
Clear opening across widthcan be determined by takingthe single width includinggrowth and subtracting theface of the posts.
Example:
Key RackDesign Information
3333For ordering information, see page 24 � www. RapidRack.com
Rapid RackDesign Information
For floor plan growth, clear width, beam profiles and clear vertical openings
When designing a Rapid Rack shelving layout, unit growth must be considered. Units have 1/2” growth:when connecting adjoining units add 1/4”*
* TT (tie plates) recommended for bulk rack for row alignment and structural integrity.
Unit clear width
Clear opening across widthcan be determined by takingthe single width includinggrowth and subtracting theface of the posts.
Example:
Using AP posts Using APH posts
Vertical Clear Opening
34 800-736-7225 � 626-333-722534
Rapid RackDesign Information
This chart representstypical vertical shelfclearance (not includingdeflection) for commonshelf models. Shelfspacing is adjustable on1 1/2” centersNOTES:1. While SRB’s may be used to sharethe total load, they are not apart of the units structuralintegrity.
2. Tie plates are an integral part ofthe units structural integrity.They should be spaced no morethan 48” apart or between everyother shelf.
3. For ‘Z’ Beam Bulk Rack ShelvingUnits; each clear opening isincreased by 1” over standarddouble rivet beams using 5/8”particle board.
4. Where ‘Z’ Beams are used as thebase shelf on Space SaverShelving the bottom opening isincreased by 1”.
*If seismic loads are required referto page 35. Use as a general guidewhen conforming to standardRapid Rack structural procedures.
Catwalks and mezzaninesdesign guide
Vertical shelf clearance
Unit capacities with AP and APH posts*Vertical and seismic loads for zones 3 and 4
This chart may be used as a preliminary guide in determiningunit capactities for structures requiring seismic consideration.The mezzanine deck load or catwalk load must be includedwhen computing the total capability of the unit.NOTE: Use APH posts, tie plates and footplates in all mezzanine and catwalk
applications.
Use Chart with caution! Seismic loads vary withlocation and installation geometry.
Seismic zone map1994 Uniform Building Code zone map. Zones are identified by thenumbers from 0 to 4. Seismic zone factors are assigned to each zone:
Zone 0 = 0 Zone 1 = 0.75
Zone 2A = 0.15 Zone 2B = 0.20
Zone 3 = 0.03 Zone 4 = 0.04
Each zone also has specific structural detailing requirements.
General Information
Rapid RackDesign Information
Seismic chart indicates approximately 5920 lb. capacity, utilizing APHposts with shelves 21” O.C.
Floor area shared by unit multiplied by floor rating must be deductedfrom total unit capacity.
1.5 ft. + 3 ft. + 1.5 ft. x 3 ft. = 18 sq. ft.18 sq. ft x 125 lbs./sq. ft.** = 2250 lbs.
5290 lbs. - 2250 lbs. - 3670 lbs. to be shared by four interior shelves(base shelf needs not be considered).3670 lbs. 4 shelves = Approximately 917 lbs/shelf.
** Typical floor rating required.
Example: Typical shelving mezzanine
35
Example: Typicalcatwalk
Seismic chart indicates unitsutilizing APH posts withshelves 24” O.C. to have anapproximate 5260 lb.capacity.
Additional units share halfthe adjacent aisle(s) loadrating which must bededucted from unit capacity.
(1/2 area of aisle) x (no. of aisles) = (total area)
(Total area) x load rating = catwalk load
Example:4 ft. x 3 ft. x (1/2 x 2) = 12 sq. ft.12 sq. ft. x 50 lbs./sq. ft.* = 600 lbs.5260 lbs. - 600 lbs = 4660 lbs. to be shared by all shelves (except base shelf)4660 lbs. 7 shelves = approximately 660 lbs./shelf.
*Typical for catwalk aisle.
Distributor information
14421 Bonelli Street | City of Industry, CA 91746
wwwwww.. RRaappiiddRRaacckk..ccoomm800-736-7225 | Fax: 800-333-5265
(RACK)
Contact Customer Service Direct 1-888-503-8218