STX STANDARD MODELS5085 Corporate Exchange Blvd SE Grand Rapids MI 49512 (616) 656-2900

TEC-B-018901212-16

Skytronrsquos Stellar XL series Light Emitting Diode (LED) surgical lights are capable of focusing a 4-316rdquo [107mm] illumination spot within in a 27rdquo [686mm] column of light Light output is 160000 lux with a color temperature of 3696K offering excellent color correction (95) and optimum shadow control at the surgical site Housed within a lightweight polymer frame Stellar XL delivers an ideal balance of weight maneuverability and illuminating performance Suitable for all surgical procedures types Stellar XL lights are intended to provide local surgical site illumination to any part of the patientrsquos body The clinical settings include but are not limited to The Operating Room Labor and Delivery Emergency Department Trauma Intensive Care Unit Minor Procedure Room etc This is inclusive of all patients

The light is operated via a wall control which houses the main power five levels of light intensity control (from 0 to 100) for each lighthead and safety fuses The wall control is required and priced separately

Sterile Handles are available as well as various handle adapters and sterile disposable covers

Architectural SpecificationsA Stellar XL series LED surgical light installation consists of a ceiling mounted radial arm system with up to three 610mm (24˝) diameter lighthead(s) and continuous 360deg rotation at all fixture rotation points Configurations range from a single arm light combination to up to three arms and lights

A standard lighthead is 610mm (24rdquo) with five focusable LED pods Each pod contains seven individual LEDs with Vertical Segmented Reflector Design (VSRD) technology Output is 160000 lux per light at a color temperature of 3696K Each lighthead is equipped with a sterilizable center handle for sterile positioning and focus The side of the light includes a focus knob and positioning handles for non-sterile control

The LEDs will operate approximately 40000 hours before illuminance degrades to a level determined unsuitable by the user and will require replacement

Stellar XL Surgical Lights - Standard Model

2 DEDICATED CONDUIT RUNS REQUIRED ATWALL CONTROL TO SEPARATE 100-240VAC INPUTLINES FROM DC OUTPUT LINES TO LIGHT FIXTURE TO PREVENT THE MIGRATION OF ELECTRICAL MAGNETIC INTERFERENCE WHICHWILL DISRUPT THE OPERATION OF THE LIGHT

34rdquo METAL CONDUIT 100-240VAC INPUT DEDICATED

34rdquo METAL CONDUIT12AWG 3 WIRESPER LIGHTHEADPLUS FIXTURE GROUNDRED GREENYELLOW BLUE30VDC OUTPUT

WALL CONTROL(SKYTRON SUPPLIED)

FIXTUREJUNCTION BOX

LIGHTINGFIXTURE

NOTICE

0 1 2 3 4 5

0 1 2 3 4 5

Electrical Requirements

Control Box Installation Requirements

100-200 VAC INPUT

16-23 VDC34rdquo CONDUIT

CONDUITCONNECTOR

FINISHED WALL

RECESS MOUNT FLANGE COVERAGESINGLEDUAL 11-34rdquoW x 14rdquoH [mm 298W x 356H]TRIPLE 13-34rdquoW x 17-14rdquoH [mm 249W x 438H]

SCREW (AR)

STUDSTUD

CONTROL BOX WITH RECESSMOUNT FLANGE INSTALLED

CONDUIT AND MOUNTING HARDWAREPROVIDED BY OTHERS BASED ON APPLICATION

SCREW (4)

SINGLEDUAL BACK BOX8-12rdquoW x 11-58rdquoH x 4rdquoD

[mm 215W x 295H x 103D]TRIPLE BACK BOX

10-12rdquoW x 14-12rdquoH x 4rdquoD[mm 267W x 369H x 103D)

NOTE FRONT EDGE OF BACKBOX MUST BE FLUSH WITHFINISHED WALL SURFACE

STX STANDARD MODELS5085 Corporate Exchange Blvd SE Grand Rapids MI 49512 (616) 656-2900

JUNCTION BOX

FRONTPANEL

(4) ANCHOR

(4) SCREW(4) SCREW

(4) SCREW

RECESS MOUNT FLANGE

FRONTPANEL

SIDE VIEW FRONT VIEW

SURFACE MOUNT RECESSED MOUNT

1-78rdquo [48mm]

1rdquo[25mm]

B

A

C

D

E

F

K G

HI

J

L

Wall Control Dimensions

DIMENSIONSSINGLEDUAL TRIPLE

A 8-58rdquo [220mm] 10-58rdquo [270mm]B 4rdquo [100mm] 4rdquo [100mm]C 10-58rdquo [270mm] 14rdquo [355mm]D 6-78rdquo [175mm] 8-58rdquo [220mm]E 7-58rdquo [195mm] 11rdquo [280mm]F 6rdquo [153mm] 6-38rdquo [162mm]G 10rdquo [255mm] 13-12rdquo [343mm]H 7-78rdquo [200mm] 10rdquo [253mm]I 11-34rdquo [298mm] 13-34rdquo [348mm]J 13-78rdquo [353mm] 17-14rdquo [438mm]K 12-38rdquo [315mm] 15-34rdquo [400mm]L 10-14rdquo [260mm] 12-14rdquo [310mm]

BC

55-12rdquo [1415mm]

39-12rdquo [1000mm]

VARIESSINGLE 10rdquo [251mm]

DUAL 15-12rdquo [397mm]TRIPLE 20-12rdquo [521mm]

1-12rdquo [43mm]

2-12rdquo [69mm]

110ordm

80rdquo [2032mm]

A

CEILING HEIGHT

DUAL

MAX 122-38rdquo [3108mm]

SINGLEMIN 99-38rdquo [2524mm]

MAX 122-38rdquo [3108mm]

TRIPLEMIN 110rdquo [2794mm]

MAX 122-38rdquo [3108mm]MIN 105-18rdquo [2670mm]

Product Specs

Standard Models AArm Length

BArm Length

CArm Length Rotation Weight Moment Load

STX5-895 35-14rdquo[895mm] NA NA 360deg 115 lbs

[522kg]425 ft lbs[576 Nm]

STX5-1090 42-1516[1090mm] NA NA 360deg 118 lbs

[534kg] 446 ft lbs[604 Nm]

STX5-1285 50-916rdquo[1285mm] NA NA 360deg 120 lbs

[546kg] 505 ft lbs[684 Nm]

STX55-895700 35-14rdquo[895mm]

27-916rdquo[700mm] NA 360deg 225 lbs

[1019kg]716 ft lbs[970 Nm]

STX55-1090895 42-1516rdquo[1090mm]

35-14rdquo[895mm] NA 360deg 232 lbs

[1053kg]830 ft lbs

[1125 Nm]

STX55-12851090 50-916rdquo[1285mm]

42-1516[1090mm] NA 360deg 237 lbs

[1077kg]1107 ft lbs[1500 Nm]

STX555 50-916rdquo[1285mm]

42-1516rdquo[1090mm]

35-14[895mm] 360deg 353 lbs

[1599kg]1320 ft lbs[1789 Nm]

Product Dimensions

STX STANDARD MODELS5085 Corporate Exchange Blvd SE Grand Rapids MI 49512 (616) 656-2900

TOP VIEWSTIFFENER PLATE DETAIL

5-1516rdquo[150mm]

5-1516rdquo[150mm]

STIFFENER PLATE(PROVIDED BY OTHERS)

11-1316rdquo[300mm]

9-12rdquo[240mm]

HOLE FORACCESS TOJUNCTION

BOX

2rdquox2rdquo [51mm x 51mm]ANGLE SWAY BRACING

90˚ APART - 4 EACH(SEE NOTE 2)9-12rdquo

[240mm]11-1316rdquo[300mm]

45˚ 45˚

11-1316rdquox11-1316rdquox3-1316rdquo[300mm x 300mm x 9mm]

STIFFENER PLATE

(4) 2rdquox 2rdquo [51mm x 51mm]ANGLE SWAY BRACING

(SEE NOTE 2)

STRUCTURAL CEILING

FINISHED CEILING

34rdquo [19mm]ALL THRED ROD

(SEE NOTE 1)

34rdquo [19mm]METAL FLEX

CONDUITSEE NOTE 3

5-1516rdquo MAX 3-1516rdquo MIN[150mm MAX 100mm MIN]

2-18rdquo[55mm]

1-116rdquo[27mm]

14-1516rdquo [380mm] DIAMOUNTING PLATE

(SKYTRON SUPPLIED)

16-12rdquo [420mm] DIAACCESS HOLE

20-12rdquo [5207mm] DIACEILING COVER (SKYTRON SUPPLIED)

FIXTUREJUNCTION

BOX

1 34rdquo [19mm] support rods located for total support of light all labor and materials for fabrication are supplied by General Contractor 34rdquo [19mm] nuts and washers for support of SKYTRON mounting plate supplied by contractor (8 each required)2 The mounting structure must be attached to structural ceiling and BRACED TO ALLOW NO TWISTING OR LATERAL MOTION and shall be designed not to provide a degree of deflection greater than two-thirds of a degree at the mouting plate3 34rdquo [19mm] metal conduit and minimum 12AWG wire size (3 wires per lighthead plus fixture ground) required between fixture and SKYTRON supplied wall control All metal conduit wiring and other electrical materials as well as installation labor for such materials associated with the installation of the SKYTRO surgical light to be provided by Electrical Contractor All installations of SKYTRON surgical lights should be under the direct supervision of a SKYTRON representative All wiring to be in accordance with local codes and by a certified electrician

This is a GENERAL GUIDELINE ONLY

Certifications

CEAAMI ES60601-1CSA-C222 60601-1IEC 60601-2-41CSA-C222-2-41IEC-60601-1-6

Useful Links

Bid SpecInstallation ManualBrochureSeismic OPMSkytron Booms Tables and SkyVisionSkytron Lights

Standard Mounting Structure Guideline Standard Mounting Structure Notes

STX STANDARD MODELS5085 Corporate Exchange Blvd SE Grand Rapids MI 49512 (616) 656-2900

JUNCTION BOX

FRONTPANEL

(4) ANCHOR

(4) SCREW(4) SCREW

(4) SCREW

RECESS MOUNT FLANGE

FRONTPANEL

SIDE VIEW FRONT VIEW

SURFACE MOUNT RECESSED MOUNT

1-78rdquo [48mm]

1rdquo[25mm]

B

A

C

D

E

F

K G

HI

J

L

Wall Control Dimensions

DIMENSIONSSINGLEDUAL TRIPLE

A 8-58rdquo [220mm] 10-58rdquo [270mm]B 4rdquo [100mm] 4rdquo [100mm]C 10-58rdquo [270mm] 14rdquo [355mm]D 6-78rdquo [175mm] 8-58rdquo [220mm]E 7-58rdquo [195mm] 11rdquo [280mm]F 6rdquo [153mm] 6-38rdquo [162mm]G 10rdquo [255mm] 13-12rdquo [343mm]H 7-78rdquo [200mm] 10rdquo [253mm]I 11-34rdquo [298mm] 13-34rdquo [348mm]J 13-78rdquo [353mm] 17-14rdquo [438mm]K 12-38rdquo [315mm] 15-34rdquo [400mm]L 10-14rdquo [260mm] 12-14rdquo [310mm]

BC

55-12rdquo [1415mm]

39-12rdquo [1000mm]

VARIESSINGLE 10rdquo [251mm]

DUAL 15-12rdquo [397mm]TRIPLE 20-12rdquo [521mm]

1-12rdquo [43mm]

2-12rdquo [69mm]

110ordm

80rdquo [2032mm]

A

CEILING HEIGHT

DUAL

MAX 122-38rdquo [3108mm]

SINGLEMIN 99-38rdquo [2524mm]

MAX 122-38rdquo [3108mm]

TRIPLEMIN 110rdquo [2794mm]

MAX 122-38rdquo [3108mm]MIN 105-18rdquo [2670mm]

Product Specs

Standard Models AArm Length

BArm Length

CArm Length Rotation Weight Moment Load

STX5-895 35-14rdquo[895mm] NA NA 360deg 115 lbs

[522kg]425 ft lbs[576 Nm]

STX5-1090 42-1516[1090mm] NA NA 360deg 118 lbs

[534kg] 446 ft lbs[604 Nm]

STX5-1285 50-916rdquo[1285mm] NA NA 360deg 120 lbs

[546kg] 505 ft lbs[684 Nm]

STX55-895700 35-14rdquo[895mm]

27-916rdquo[700mm] NA 360deg 225 lbs

[1019kg]716 ft lbs[970 Nm]

STX55-1090895 42-1516rdquo[1090mm]

35-14rdquo[895mm] NA 360deg 232 lbs

[1053kg]830 ft lbs

[1125 Nm]

STX55-12851090 50-916rdquo[1285mm]

42-1516[1090mm] NA 360deg 237 lbs

[1077kg]1107 ft lbs[1500 Nm]

STX555 50-916rdquo[1285mm]

42-1516rdquo[1090mm]

35-14[895mm] 360deg 353 lbs

[1599kg]1320 ft lbs[1789 Nm]

Product Dimensions

STX STANDARD MODELS5085 Corporate Exchange Blvd SE Grand Rapids MI 49512 (616) 656-2900

TOP VIEWSTIFFENER PLATE DETAIL

5-1516rdquo[150mm]

5-1516rdquo[150mm]

STIFFENER PLATE(PROVIDED BY OTHERS)

11-1316rdquo[300mm]

9-12rdquo[240mm]

HOLE FORACCESS TOJUNCTION

BOX

2rdquox2rdquo [51mm x 51mm]ANGLE SWAY BRACING

90˚ APART - 4 EACH(SEE NOTE 2)9-12rdquo

[240mm]11-1316rdquo[300mm]

45˚ 45˚

11-1316rdquox11-1316rdquox3-1316rdquo[300mm x 300mm x 9mm]

STIFFENER PLATE

(4) 2rdquox 2rdquo [51mm x 51mm]ANGLE SWAY BRACING

(SEE NOTE 2)

STRUCTURAL CEILING

FINISHED CEILING

34rdquo [19mm]ALL THRED ROD

(SEE NOTE 1)

34rdquo [19mm]METAL FLEX

CONDUITSEE NOTE 3

5-1516rdquo MAX 3-1516rdquo MIN[150mm MAX 100mm MIN]

2-18rdquo[55mm]

1-116rdquo[27mm]

14-1516rdquo [380mm] DIAMOUNTING PLATE

(SKYTRON SUPPLIED)

16-12rdquo [420mm] DIAACCESS HOLE

20-12rdquo [5207mm] DIACEILING COVER (SKYTRON SUPPLIED)

FIXTUREJUNCTION

BOX

1 34rdquo [19mm] support rods located for total support of light all labor and materials for fabrication are supplied by General Contractor 34rdquo [19mm] nuts and washers for support of SKYTRON mounting plate supplied by contractor (8 each required)2 The mounting structure must be attached to structural ceiling and BRACED TO ALLOW NO TWISTING OR LATERAL MOTION and shall be designed not to provide a degree of deflection greater than two-thirds of a degree at the mouting plate3 34rdquo [19mm] metal conduit and minimum 12AWG wire size (3 wires per lighthead plus fixture ground) required between fixture and SKYTRON supplied wall control All metal conduit wiring and other electrical materials as well as installation labor for such materials associated with the installation of the SKYTRO surgical light to be provided by Electrical Contractor All installations of SKYTRON surgical lights should be under the direct supervision of a SKYTRON representative All wiring to be in accordance with local codes and by a certified electrician

This is a GENERAL GUIDELINE ONLY

Certifications

CEAAMI ES60601-1CSA-C222 60601-1IEC 60601-2-41CSA-C222-2-41IEC-60601-1-6

Useful Links

Bid SpecInstallation ManualBrochureSeismic OPMSkytron Booms Tables and SkyVisionSkytron Lights

Standard Mounting Structure Guideline Standard Mounting Structure Notes

STX STANDARD MODELS5085 Corporate Exchange Blvd SE Grand Rapids MI 49512 (616) 656-2900

TOP VIEWSTIFFENER PLATE DETAIL

5-1516rdquo[150mm]

5-1516rdquo[150mm]

STIFFENER PLATE(PROVIDED BY OTHERS)

11-1316rdquo[300mm]

9-12rdquo[240mm]

HOLE FORACCESS TOJUNCTION

BOX

2rdquox2rdquo [51mm x 51mm]ANGLE SWAY BRACING

90˚ APART - 4 EACH(SEE NOTE 2)9-12rdquo

[240mm]11-1316rdquo[300mm]

45˚ 45˚

11-1316rdquox11-1316rdquox3-1316rdquo[300mm x 300mm x 9mm]

STIFFENER PLATE

(4) 2rdquox 2rdquo [51mm x 51mm]ANGLE SWAY BRACING

(SEE NOTE 2)

STRUCTURAL CEILING

FINISHED CEILING

34rdquo [19mm]ALL THRED ROD

(SEE NOTE 1)

34rdquo [19mm]METAL FLEX

CONDUITSEE NOTE 3

5-1516rdquo MAX 3-1516rdquo MIN[150mm MAX 100mm MIN]

2-18rdquo[55mm]

1-116rdquo[27mm]

14-1516rdquo [380mm] DIAMOUNTING PLATE

(SKYTRON SUPPLIED)

16-12rdquo [420mm] DIAACCESS HOLE

20-12rdquo [5207mm] DIACEILING COVER (SKYTRON SUPPLIED)

FIXTUREJUNCTION

BOX

1 34rdquo [19mm] support rods located for total support of light all labor and materials for fabrication are supplied by General Contractor 34rdquo [19mm] nuts and washers for support of SKYTRON mounting plate supplied by contractor (8 each required)2 The mounting structure must be attached to structural ceiling and BRACED TO ALLOW NO TWISTING OR LATERAL MOTION and shall be designed not to provide a degree of deflection greater than two-thirds of a degree at the mouting plate3 34rdquo [19mm] metal conduit and minimum 12AWG wire size (3 wires per lighthead plus fixture ground) required between fixture and SKYTRON supplied wall control All metal conduit wiring and other electrical materials as well as installation labor for such materials associated with the installation of the SKYTRO surgical light to be provided by Electrical Contractor All installations of SKYTRON surgical lights should be under the direct supervision of a SKYTRON representative All wiring to be in accordance with local codes and by a certified electrician

This is a GENERAL GUIDELINE ONLY

Certifications

CEAAMI ES60601-1CSA-C222 60601-1IEC 60601-2-41CSA-C222-2-41IEC-60601-1-6

Useful Links

Bid SpecInstallation ManualBrochureSeismic OPMSkytron Booms Tables and SkyVisionSkytron Lights

Standard Mounting Structure Guideline Standard Mounting Structure Notes

STX STANDARD MODELS5085 Corporate Exchange Blvd SE Grand Rapids MI 49512 (616) 656-2900

Date Revision Revision History01212015 0 Initial release

Revision History