© Stay Online Corp. 1996 - 2016 All Rights Reserved. All other trademarks cited here are the property of their respective owners.

V-Lock Cords:Power Source: Use with any APCAP8000 series rack PDU to secure theC14 or C20 end to the powersource.Equipment: To lock the C13 or C19connectors the inlets must have thecorresponding proprietaryV-Lock mating inlet, which isuncommon.

W-Lock Cords:Power Source: Use with any APCAP8000 series rack PDU to secure theC14 or C20 end to the powersource.Equipment: W-Lock cord secures theC13 or C19 female ends via anintegrated spring loaded grip thatgrabs the ground pin of any matinginlet.

Dual-Lock Cords:Power Source: Use with any ServerTech Lockable CDU, Raritan SecureLock PDU, or Emerson Knurr PDU to secure the C14 or C20 end to the power source.Equipment: Dual-Lock secures C13 or C19 female ends via an integrated grip that grabs the ground pin of any mating inlet.

P-Lock Cords:Power Source: Use with any ServerTechLockable CDU, Raritan SecureLock PDU, orEmerson Knurr PDU to secure the C14 orC20 end to the power source.

Equipment: No locking option. Use a Secure Sleeve to tighten the C13 or C19 ends.

IEC-Lock Cords:Power Source: Use with Geist PDU Strips that have been configured with IEC Lock proprietary outlets to secure the C14 or C20 end.

Equipment: IEC-Lock cord will secure the C13 or C19 female ends via an integrated spring loaded grip that grabs the ground pin on the mating inlet.

S-Lock Cords:Power Source: No locking option unless aTwist Lock or Pin & Sleeve plug is used.

Equipment: S-Lock cord will secure the C13 or C19 female ends via an integrated grip that grabs the ground pin on anymating inlet.

Secure Sleeve Female:Augment existing cord retention strength with Secure Sleeve C14 / C20 plug or C13 / C19 connector covers. Retrofit existing cords inexpensively.

Locking Cables

The Power Cord Manufacturer

®

USA: (888) 346-4688Europe: + 420 211 151 362

International: 00+1+919 529 3133www.stayonline.com http://eu.stayonline.com