standards and approvals - IPS Flow Systems · Polypropylene (PP) is a thermoplastic from the polyolefin group of materials. It has low density compared to other thermoplastics, and

polypropylene

IPS Flow SystemsSeaham Grange Industrial Estate, Seaham, Co Durham, SR7 0PT, England

Tel: +44+ 191 521 3111 Fax: +44+ 191 521 3222E-mail: [email protected] Website: www.ipsflowsystems.com

Polypropylene (PP) piping systems are widely used in industrial processing. Light in weight yet with high impact strength and reliable heat fusion welding, PP also offers good abrasion resistance and is a good thermal and electrical insulator.

PP is suitable for working use at temperatures up to 90˚C, and will withstand short term use at a maximum 110˚C.

Chemical resistance is excellent: PP is resistant to aqueous solutions of acids, alkalis and salts, and to a large number of organic solvents.

PP systems are assembled using heat fusion welding, either using socket fittings or butt fusion of pipes and/or fittings end to end. Welding equipment is available for sale or hire and is featured in the Installation Tools section.

Pipe-H Homopolymer - mm Size 230Pipe - Copolymer - mm Size 231

Socket Fusion Fittings - mm Size 232Socket Fusion Adaptor Fittings - mm Size 232

Socket Fusion Flanges - mm Size 233Fusion Spigot Fittings - mm Size 234

Fusion Spigot Adaptor Fittings - mm Size 240Fusion Spigot Flanges - mm Size 241

Flexible Couplings 244Flame Retardent Pipe and Fittings 246

Flame Retardent Electrically Conductive Pipe and Fittings 248Basket Strainer 250

Bag Filter 251Ball Valve, Double Union 252

Ball Valve, M1 Modular 253Ball Valve - Safi Compact 254

Diaphragm Valve 256Needle Valve 257

T and L-Port Ball Valve 258 Butterfly Valve 260

Non-Return Valve, Wafer Check 264Air Release Valve 266

Foot Valve 266Non-Return Valve, Check 267

Line Strainer 269Gauge Guard 269

Ball Valve, Electrically Actuated 270Ball Valve, Pneumatically Actuated 272

Diaphragm Valve, Actuated 273Pressure Reducing Valve 274

Pressure Relief Valve 278

Temperature range 0˚C to 90˚C (Short Term 110˚C)High impact strengthAbrasion resistantSuitable for handling foodstuffsIdeal for above and below ground useThreading possibleResistant to acids, alkalis, salts and manyorganic solventsGood insulatorLightweight (density 0.905-0.92)

Welding equiment requiredNot resistant to concentrated oxidising acidsThermal expansion is higher than other plastics

application guide

Pipe : BS 5556: 1978, DIN 8077/8078Fittings : DIN 16962Threaded fittings : BS21/DIN 2199/ISO 727

standards and approvals

section guide

5

226

about: polypropylene

General properties of polypropylene

Polypropylene exhibits thermal stability up to 100°C (short-term 120°C for drainage systems). Polypropylene also shows good impact strength, improving further along with increasing temperature.

Polypropylene is physiologically non-toxic (in accordance with ONORM B5014, Part 1, FDA, BGA, and KTW guidelines) making it ideally suited for a piping material in contact with potable water.

Some important advantages of polypropylene are:

- Low specific weight of 0.91g/cm3

- High long term creep resistance- Excellent chemical resistance- High resistance to thermal ageing- Outstanding welding characteristics- Excellent abrasion resistance- Smooth internal surfaces

CharacteristicsChemical resistance

The chemical resistance of polypropylene is considered excellent. It is resistant to dilute (aqueous) solutions of salts, acids and alkalis and to a large number of organic solvents. Polypropylene is resistant to concentrated hydrochloric acid and hydrofluoric acid, however above certain concentration levels diffusion can occur. This does not damage the material itself but it can cause secondary damage to surrounding steel constructions. In this type of application, double containment piping systems have been found ideally suited.

Note: PP-R and Copper:Direct contact between PP-R and copper, especially at higher temperatures, can lead to deterioration of the physical properties of PP-R. Heat ageing is faster due to the accelerated thermal oxidisation.

Weathering resistance

Piping systems in beige grey polypropylene are not UV stabilised, and therefore they should be suitably protected against degradation when used outdoors - especially where there are high UV levels. Protection against direct solar radiation can be achieved by the application of a UV absorbent coating such as AGRU Coat, or by adding a layer of insulation. It is also possible to compensate for the surface damage that may arise by increasing the wall thickness of the piping system. In such cases, the additional wall thickness should be not less than 2mm. As polypropylene does not contain light stable colour pigments, it may experience a change of colour (fading) because of long-term weathering.

Electrical characteristics

Polypropylene is non-conductive, therefore systems will remain free from electrolytic corrosion. Precautions should be taken to avoid static discharge should any part of a Polypropylene piping system pass through an area where explosive gases may be present.

Physiological characteristics

Polypropylene piping systems from IPS are physiologically non-toxic (in accordance with ONORM B5014, Part 1, FDA, BGA, and KTW guidelines) making them ideally suited as a piping material in contact with potable water.

Polypropylene (PP) is a thermoplastic from the polyolefin group of materials. It has low density compared to other thermoplastics, and a unique combination of properties including mechanical strength, chemical resistance and thermal stability.

There are two different types of polypropylene that are in common use as piping materials:

PP-H (Homopolymer)PP-R (Random copolymer)

The pipes, sheets and semi-finished products supplied by IPS are manufactured from nucleoid PP-H 100 (Beta ß3 -PP), whilst fittings are produced from PP-R (polypropylene random copolymer).

Polypropylene generally exhibits a good resistance against a variety of chemicals, such as salts, acids, and alkalis. Good chemical resistance is also achieved against contact with solvents, such as alcohols, esters and ketones. Consequently, solvent cement welding of polypropylene pipes and fittings is not possible.

There are a number of welding techniques suitable for pressure piping applications. High quality, reliable joints can be achieved using socket fusion jointing, butt fusion welding, non-contact Infra-Red (IR) butt welding, and electrofusion welding. In addition, polypropylene systems can be joined using flanges, threaded connections and mechanical couplings.

Polypropylene piping systems are available from IPS in metric dimensions according to DIN 8077/8078 and DIN 16962.

Properties of Polypropylene (Average values)

Property PP-H PP-R

Density 0.91g/cm3 0.91g/cm3

Tensile Strength 30 MPa 25 MPa

Elongation at Break >300% >300%

Notched Impact Strength at 23°C 50 kJ/ m2 25 kJ/ m2

Notched Impact Strength at -30°C 5 kJ/ m2 2 kJ/ m2

Modulus of Elasticity 1300MPa 900 MPa

Coefficient of Linear Expansion 0.16mm/m°C 0.16mm/m°C

Maximum Operating Temperature 90°C 90°C

Minimum Operating Temperature -10°C -10°C

Crystalline Melting Temperature 160-165°C 150-154°C

Melt Flow Index 0.50 g/10min 0.50g/10min

Surface Resistance >1013 Ω >1013 Ω

Thermal Conductivity 0.22 W/m · K 0.24 W/m · K

Flammability HB UL94 HB UL94

Colour - Beige Grey 7032 RAL 7032 RAL

IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l Co Durham l SR7 0PT l Tel: 0191 521 3111 l www.ipsflowsystems.com

5

227

about: polypropylenePressure ratings for polypropylene systemsMaximum continuous pressure ratings

Pipes, fittings and valves are designed to operate continuously for 50 years at their maximum rated pressure at 20°C as follows, unless otherwise stated.

The pressure ratings for Polypropylene pipes according to DIN 8077 & DIN 8078 and Polypropylene fittings according to DIN 16962 are defined by the ‘nominal pressure’ method, whereby pipes, fittings and valves are grouped together according to a single nominal pressure rating. The PN rating is the maximum permitted operational pressure in bars calculated at 20°C, for example PN6 indicates a maximum working pressure of 6 bars. According to this method the pressure ratings of Polypropylene pipes and fittings according to the nominal pressure system is as follows:-

Jointing Polypropylene SystemsPP pipe to pipe and pipe to fitting joints are easy to make, using socket fusion, butt fusion or electrofusion welds.

Welding equipment is available for sale or hire - see Tools and Installation Equipment.Detailed installation instructions, as well as free training, is available on request.

Pipe Fitting

HeatingSocket

HeatingSpigot

HeatingElement

Individual Parts

Heating

Finished Joint

Socket FusionHeatingElement

HeatingElement

Pipe

Fitting

Pipe

Fitting

Individual Parts

Heating

Finished Joint

Individual Parts

Heating

Finished Joint

Butt Fusion Infra-Red (IR) FusionElectro-fusion

Socket

Pipe Pipe

Individual Parts

Heating

Finished Joint

Electro-Fusion

Size Range Max. Operating Pressure Fittings Socket Fusion PN10 20mm to 110mm 10 Bar Spigot Fusion PN10 20mm to 500mm 10 Bar

PN6 50mm to 1000mm 6 BarPN3.2 110mm to 1000mm 3.2 Bar

Threaded PN10 1/4″ to 4″ 10 Bar

Size Range Max. Operating PressurePipe PN16 10mm to 225mm 16 Bar

PN10 16mm to 500mm 10 BarPN6 20mm to 710mm 6 BarPN4 40mm to 1000mm 4 BarPN3.2 50mm to 1200mm 3.2 BarPN2.5 63mm to 1400mm 2.5 Bar

Standard Dimensional Ratio (SDR)

Standard Dimensional Ratio (SDR) is used to define thermoplastic pipes in a variety of materials including polypropylene, polyethylene, and PVC-U. Taken from ISO 4065, SDR is described as being ‘the ratio of the nominal outside diameter of a pipe to its nominal wall thickness’. To calculate the SDR according to ISO 4065 the following equation can be used:

SDR = de

where:SDR = Value to be calculatede = Thickness of the pipe wall (mm)d = Pipe outside diameter (mm) e

d SDR = d/e


5

228

polypropylene pipe availability - PP-HMetric Sizes DIN 8077/8078

Series Ventilation S-20 S-16 S-12.5 S-8.3 S-5 S-3.2SDR - SDR41 SDR33 SDR26 SDR17.6 SDR11 SDR7.4

Size Working Pressure - PN2.5 PN3.2 PN4 PN6 PN10 PN16 10 O.D. (mm)

Wall (mm)Weight/m (kg)

12 O.D. (mm) 12Wall (mm) 2.0Weight/m (kg) 0.06


20 O.D. (mm) 20 20Wall (mm) 1.9 2.8Weight/m (kg) 0.14 0.15


32 O.D. (mm) 32 32 32Wall (mm) 2.0 2.9 4.4Weight/m (kg) 0.17 0.26 0.37

40 O.D. (mm) 40 40 40 40Wall (mm) 1.8 2.3 3.7 5.5Weight/m (kg) 0.22 0.27 0.41 0.58



75 O.D. (mm) 75 75 75 75 75Wall (mm) 2.3 2.9 4.3 6.8 10.3Weight/m (kg) 0.52 0.65 0.93 1.40 2.00


110 O.D. (mm) 110 110 110 110 110 110Wall (mm) 2.7 3.4 4.2 6.3 10.0 15.1Weight/m (kg) 0.90 1.11 1.36 1.98 3.01 4.29




















1200 O.D. (mm) 1200 1200 1200Wall (mm) 18.0 29.4 36.7Weight/m (kg) 64.10 103.00 128.00



5

229

polypropylene pipe availability - PP-R and special gradesMetric Sizes DIN 8077/8078 PPs: Flame RetardentPP-R PPS-ESD-el

Series S-5 Ventilation S-20 S-16 S-5 Ventilation S-16 S-8.3 S-5SDR SDR11 - SDR41 SDR33 SDR11 - SDR33 SDR17.6 SDR11

Size Working Pressure PN10 - PN2.5 PN3.2 PN10 - PN3.2 PN6 PN10 20 O.D. (mm) 20 20

Wall (mm) 1.9 1.9Weight/m (kg) 0.11 0.12

25 O.D. (mm) 25 25 Wall (mm) 2.3 2.3

Weight/m (kg) 0.16 0.17 32 O.D. (mm) 32 32 32

Wall (mm) 2.9 2.9 2.9Weight/m (kg) 0.26 0.27 0.32

40 O.D. (mm) 40 40 Wall (mm) 3.7 3.7

Weight/m (kg) 0.41 0.42 50 O.D. (mm) 50 50 50


63 O.D. (mm) 63 63 63 63 Wall (mm) 5.8 2.0 5.8 5.8

Weight/m (kg) 1.01 0.39 1.03 1.25 75 O.D. (mm) 75 75 75 75

Wall (mm) 6.8 1.9 6.8 6.8Weight/m (kg) 1.40 0.45 1.44 1.74

90 O.D. (mm) 90 90 90 90 90 Wall (mm) 8.2 2.2 8.2 2.8 8.2

Weight/m (kg) 2.02 0.62 2.08 0.93 2.52 110 O.D. (mm) 110 110 110 110 110 110 110

Wall (mm) 10.0 2.7 10.0 3.0 3.4 6.3 10Weight/m (kg) 3.01 0.92 3.09 1.23 1.40 2.47 3.74

125 O.D. (mm) 125 125 Wall (mm) 11.4 3.1

Weight/m (kg) 3.89 1.20 140 O.D. (mm) 140 140 140

Wall (mm) 12.7 3.0 12.7 Weight/m (kg) 4.87 1.32 4.99


180 O.D. (mm) 180 180 180 Wall (mm) 16.4 3.0 3.0

Weight/m (kg) 8.05 1.71 2.04 200 O.D. (mm) 200 200 200 200 200

Wall (mm) 18.2 3.0 3.0 6.2 11.4Weight/m (kg) 9.92 1.90 2.27 4.57 8.07

225 O.D. (mm) 225 225 225 225 Wall (mm) 20.5 3.5 3.5 6.9

Weight/m (kg) 12.60 2.47 2.98 5.68 250 O.D. (mm) 250 250 250


280 O.D. (mm) 280 280 Wall (mm) 25.4 4.0 Weight/m (kg) 19.40 3.48

315 O.D. (mm) 315 315 315 315 Wall (mm) 28.6 5.0 5.0 9.7

Weight/m (kg) 24.60 4.91 5.88 11.14 355 O.D. (mm) 355 355

Wall (mm) 5.0 5.0Weight/m (kg) 5.54 6.60

400 O.D. (mm) 400 400 400 Wall (mm) 36.3 6.0 6.0

Weight/m (kg) 39.5 7.39 8.94450 O.D. (mm) 450 450

Wall (mm) 40.9 6.0 Weight/m (kg) 50.10 8.33




710 O.D. (mm) 710* 710Wall (mm) 40.2 12.0Weight/m (kg) 80.7 26.0

800 O.D. (mm) 800* 800Wall (mm) 45.3 12.0Weight/m (kg) 103.0 29.30




* SDR 17


5

230

pipe homo-polymer

metric sizesPP-H Homopolymer Pipe

40 - - 50 3.0 12 705 0050 00 63 3.0 12 705 0063 00 75 3.0 12 705 0075 00

90 3.0 12 705 0090 00 110 3.0 12 705 0110 00 125 3.0 12 705 0125 00 140 3.0 12 705 0140 00 160 3.0 12 705 0160 00 180 3.0 12 705 0180 00 200 3.0 12 705 0200 00 24.05 225 3.5 12 705 0225 00 250 3.5 12 705 0250 00 34.95 280 4.0 12 705 0280 00 315 5.0 12 705 0315 00 62.21 355 6.0 12 705 0355 00 75.37 400 6.0 12 705 0400 00 94.53 450 6.0 12 705 0450 00 125.36 500 8.0 12 705 0500 00 183.61 560 10.0 12 705 0560 00 256.60 630 10.0 12 705 0630 00 290.35 710 12.0 12 705 0710 00 390.85 800 12.0 12 705 0800 00 429.51 900 15.0 12 705 0900 00 653.93 1000 15.0 12 705 1000 00 727.21 1200 18.0 12 705 1200 00 1103.001400 20.0 12 705 1400 00 1499.49

- - - - 12 705 0063 41 4.05 12 705 0075 41 5.07 12 705 0090 41 7.06 12 705 0110 41 10.33 12 705 0125 41 13.83 12 705 0140 41 17.29 12 705 0160 41 21.79 12 705 0180 41 27.62 12 705 0200 41 33.44 12 705 0225 41 42.46 12 705 0250 41 59.26 12 705 0280 41 71.05 12 705 0315 41 89.83 12 705 0355 41 119.33 12 705 0400 41 152.20 12 705 0450 41 227.38 12 705 0500 41 278.11 12 705 0560 41 348.55 12 705 0630 41 441.56 12 705 0710 41 561.84 12 705 0800 41 711.24 12 705 0900 41 947.03 12 705 1000 41 1168.79 12 705 1200 41 1175.71 12 705 1400 41 2540.51

Code Price/m

Wall Code Price/mSize- -

12 705 0050 33 3.36 12 705 0063 33 4.65 12 705 0075 33 6.32 12 705 0090 33 9.17 12 705 0110 33 13.43 12 705 0125 33 17.58 12 705 0140 33 21.49 12 705 0160 33 28.05 12 705 0180 33 35.51 12 705 0200 33 44.07 12 705 0225 33 55.06 12 705 0250 33 68.46 12 705 0280 33 92.76 12 705 0315 33 117.38 12 705 0355 33 155.68 12 705 0400 33 198.29 12 705 0450 33 294.99 12 705 0500 33 361.06 12 705 0560 33 455.77 12 705 0630 33 575.15 12 705 0710 33 732.00 12 705 0800 33 926.35 12 705 0900 33 1241.03 12 705 1000 33 1527.12 12 705 1200 33 2310.40 - -

12 705 0040 26 2.56 12 705 0050 26 3.47 12 705 0063 26 5.47 12 705 0075 26 7.41 12 705 0090 26 10.80 12 705 0110 26 15.68 12 705 0125 26 20.28 12 705 0140 26 25.38 12 705 0160 26 33.26 12 705 0180 26 41.72 12 705 0200 26 51.68 12 705 0225 26 64.86 12 705 0250 26 80.25 12 705 0280 26 108.61 12 705 0315 26 138.31 12 705 0355 26 183.61 12 705 0400 26 232.10 12 705 0450 26 345.74 12 705 0500 26 425.64 12 705 0560 26 533.64 12 705 0630 26 677.40 12 705 0710 26 860.61 12 705 0800 26 1091.74 12 705 0900 26 1458.17 12 705 1000 26 1794.50 - - - -

Standard length 5mPlease note that a transportation surcharge may be applied on pipe diameters 250mm or larger - please enquire for details.

Ventilation PN2.5/S-20/SDR41 PN3.2/S-16/SDR33 PN4/S-12.5/SDR26

ElectrofusionCoupling

PN10 (SDR 11)

20 11 173 0020 11 18 14.3125 11 173 0025 11 24 16.2632 11 173 0032 11 26 17.5840 11 173 0040 11 28 18.4550 11 173 0050 11 32 28.6163 11 173 0063 11 30 30.0075 11 173 0075 11 30 42.0590 11 173 0090 11 32 56.25

110 11 173 0110 11 32 68.46125 11 173 0125 11 32 96.88140 11 173 0140 11 34 109.50160 11 173 0160 11 32 125.50

180* 11 173 0180 11 40 184.28200 11 173 0200 11 38 213.08225 11 173 0225 11 34 262.40250 11 173 0250 11 38 691.14

280* 11 173 0280 11 40 936.89315 11 173 0315 11 38 1116.15355 11 173 0355 11 38 1195.48

Size Code Voltage Price

Manufactured fromPP-H (Homopolymer) material

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

Pressure ratings for Polypropylene pipework systems are always quoted at 20˚C. As working temperature increases, the maximum working pressure decreases by the factor indicated.

* For continuous use at these temperatures,consult our Customer Services Department

Temperature De-RatingFactors

20 1.00 30 1.00 40 0.82 50 0.66 60 0.50 70 0.36 80 0.25 90* 0.13100* 0.05

Working Pressure Temperature (˚C) De-Rating Factor

i

This data is provided for guidence only. For specific projects please contact our technical department

Code Price/m Code Price/m

* Special order only


5

231

pipe homo-polymer and co-polymer

PP-R Copolymer Pipe

PN10/S-5/SDR 11

20 11 705 0020 1125 11 705 0025 11 32 11 705 0032 11 40 11 705 0040 1150 11 705 0050 1163 11 705 0063 1175 11 705 0075 1190 11 705 0090 11

110 11 705 0110 11 125 11 705 0125 11 140 11 705 0140 11 160 11 705 0160 11 180 11 705 0180 11 200 11 705 0200 11 225 11 705 0225 11 250 11 705 0250 11 280 11 705 0280 11 315 11 705 0315 11 400 11 705 0400 11 450 11 705 0450 11 500 11 705 0500 11 710* 11 705 0710 17 800* 11 705 0800 17

Size Code Price/m 10 - - 12 - - 16 - -

20 - - 25 - -32 12 705 0032 17 2.7740 12 705 0040 17 3.27

50 12 705 0050 17 5.11 63 12 705 0063 17 7.9875 12 705 0075 17 11.34

90 12 705 0090 17 15.68110 12 705 0110 17 24.29125 12 705 0125 17 31.38140 12 705 0140 17 38.67160 12 705 0160 17 50.70180 12 705 0180 17 62.75200 12 705 0200 17 78.33225 12 705 0225 17 98.86250 12 705 0250 17 121.74280 12 705 0280 17 164.93315 12 705 0315 17 210.14355 12 705 0355 17 280.16400 12 705 0400 17 354.18450 12 705 0450 17 526.82500 12 705 0500 17 649.11 560 12 705 0560 17 814.85 630 12 705 0630 17 1031.88 710 12 705 0710 17 1308.13

Code Price/mSize

- - - - 12 705 0016 11 1.22 12 705 0020 11 2.18 12 705 0025 11 2.87 12 705 0032 11 4.05 12 705 0040 11 5.04 12 705 0050 11 7.83 12 705 0063 11 12.14 12 705 0075 11 16.88 12 705 0090 11 24.29 12 705 0110 11 33.93 12 705 0125 11 47.17 12 705 0140 11 59.19 12 705 0160 11 77.11 12 705 0180 11 97.66 12 705 0200 11 119.39 12 705 0225 11 151.91 12 705 0250 11 186.85 12 705 0280 11 255.52 12 705 0315 11 322.59 12 705 0355 11 430.12

Code Price/m

- - 12 705 0012 07 1.23 12 705 0016 07 1.76 12 705 0020 07 2.29 12 705 0025 07 3.45 12 705 0032 07 5.73 12 705 0040 07 7.02 12 705 0050 07 10.85 12 705 0063 07 17.05 12 705 0075 07 24.29 12 705 0090 07 34.55 12 705 0110 07 51.70 12 705 0125 07 66.51 12 705 0140 07 83.66 12 705 0160 07 108.93 - - - - 12 705 0225 07 260.20

Code Price/m

PN6/S-8.3/SDR17.6 PN10/S-5/SDR11 PN16/S-3.2/SDR7.4


PP-H Homopolymer Pipe

AGRU Polypropylene pipes and fittings are manufactured in accordance with DIN 8077/8078 using the following materials:

Pipes: Nucleoid PP-H 100 (Beta ß-PP) Fittings: PP-R (polypropylene random copolymer)

Nucleoid PP-H is chosen for pipes because of its exceptional impact strength at cold temperatures, good stress fracture and chemical resistance. PP-R (also optionally available as pipe) provides high long term creep strength at continuous high temperatures. Other types of Polypropylene are also available:

PP-H/PP-R industrial piping systems Plastic pipes and fittings made of PP-H and PP-R have proved their value for decades in every area of industry. Above all, excellent temperature and corrosion resistance ensure durability. PP is characterised by its superior strength, stiffness, hardness, and the temperature and chemical resistance these features ensure. PP can be used between -5°C and +95°C.

Electrically conductive: HDPE-ESD-el / PPS / PPS-ESD-el In plastic piping system building, electrically conductive piping must be used in areas with risk of explosion. Electrically conductive plastics modified by the addition of carbon black guarantee that the known benefits of polyolefins, such as chemical resistance and easy processing and installation, are retained. However, the conductive carbon black does reduce the impact strength and creep strength.

High Purity PP Pure PP-R (High purity grade Polypropylene random copolymer) Selected and fully traceable raw materials are manufactured under strictly controlled conditions. This materials is ideal for less critical ultra-pure water applications (see High Purity Systems).

Polypure PP-R: Natural (Polypropylene random copolymer, natural coloured) As natural PP-R contains no colour additives, it is ideally suited for high purity water piping systems. Note that it is not UV stabilised (see High Purity Systems).

Polypropylene Materiali

on

application

*SDR 17


5

Maximum working pressures (socket fusion):All sizes PN10

Pressure Ratings

16 11 050 0016 07 3.6420 11 050 0020 07 4.0525 11 050 0025 07 4.8232 11 050 0032 07 5.5440 11 050 0040 07 7.1250 11 050 0050 07 9.7863 11 050 0063 07 12.5475 11 050 0075 07 27.6290 11 050 0090 07 34.55

110 11 050 0110 07 55.26

232

socket fusion fittings

metric sizesTee 90˚

Reducing Tee 90˚

Elbow 90˚

Elbow 45˚

Socket

16 11 056 0016 07 3.3620 11 056 0020 07 3.6425 11 056 0025 07 4.1732 11 056 0032 07 4.8240 11 056 0040 07 6.0350 11 056 0050 07 10.0763 11 056 0063 07 14.5275 11 056 0075 07 35.91 90 11 056 0090 07 53.49

110 11 056 0110 07 66.51

Size Code PriceReducerSpigot x Socket

Female AdaptorBSP or NPT threaded

25/20 11 055 2520 07 5.61 32/20 11 055 3220 07 6.90 32/25 11 055 3225 07 6.90 40/20 11 055 4020 07 7.83 40/25 11 055 4025 07 7.83 40/32 11 055 4032 07 7.8350/20 11 055 5020 07 12.62 50/25 11 055 5025 07 12.62 50/32 11 055 5032 07 12.62 50/40 11 055 5040 07 12.62 63/25 11 055 6325 07 18.45 63/32 11 055 6332 07 18.45 63/40 11 055 6340 07 18.45 63/50 11 055 6350 07 18.45

16 11 051 0016 07 2.5320 11 051 0020 07 3.1625 11 051 0025 07 3.8532 11 051 0032 07 4.6540 11 051 0040 07 5.8450 11 051 0050 07 10.7763 11 051 0063 07 14.0175 11 051 0075 07 29.60 90 11 051 0090 07 37.30

110 11 051 0110 07 54.06

16 11 054 0016 07 2.9520 11 054 0020 07 3.4525 11 054 0025 07 3.6432 11 054 0032 07 4.0540 11 054 0040 07 5.2450 11 054 0050 07 6.7263 11 054 0063 07 9.2875 11 054 0075 07 14.9990 11 054 0090 07 20.72

110 11 054 0110 07 27.62

Cap

16 11 053 0016 07 2.1820 11 053 0020 07 2.0725 11 053 0025 07 2.1832 11 053 0032 07 2.8740 11 053 0040 07 3.6450 11 053 0050 07 6.1163 11 053 0063 07 10.0075 11 053 0075 07 16.2690 11 053 0090 07 20.51

110 11 053 0110 07 31.97

20/16 11 057 2016 07 2.5025/20 11 057 2520 07 3.3632/20 11 057 3220 07 4.1732/25 11 057 3225 07 4.1740/20 11 057 4020 07 4.9640/25 11 057 4025 07 4.96 40/32 11 057 4032 07 4.96 50/20 11 057 5020 07 5.7350/25 11 057 5025 07 5.7350/32 11 057 5032 07 5.7350/40 11 057 5040 07 5.73 63/25 11 057 6325 07 7.9063/32 11 057 6332 07 7.9063/40 11 057 6340 07 7.90 63/50 11 057 6350 07 7.9075/63 11 057 7563 07 13.8390/63 11 057 9063 07 19.24 90/75 11 057 9075 07 19.24

110/63 11 057 1163 07 26.25110/90 11 057 1190 07 26.25

Size Code Price

20 x 1/2 11 034 2020 07 10.00 25 x 3/4 11 034 2525 07 11.28 32 x 1 11 034 3232 07 14.68 40 x 11/4 11 034 4040 07 16.79 50 x 11/2 11 034 5050 07 26.45 63 x 2 11 034 6363 07 33.15

UnionFPM O-Rings

16 11 024 1116 07 11.7020 11 024 1120 07 13.3225 11 024 1125 07 14.5232 11 024 1132 07 17.3740 11 024 1140 07 24.7050 11 024 1150 07 34.7463 11 024 1163 07 47.36

Male AdaptorBSP or NPT threaded

20 x 3/4 11 035 2025 07 9.3925 x 1 11 035 2532 07 11.74 32 x 11/4 11 035 3240 07 14.12 40 x 11/2 11 035 4050 07 23.29 50 x 2 11 035 5063 07 29.40Code shown is for BSPCode for NPT on request

Code shown is for BSP.Code for NPT on request.

i

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price


5

233

socket fusion fittings

Stub FlangeDIN or ANSI standards

Blind FlangePolypropylene with steelcore drilled toBS4504 NP10/16 -black

Code shown is for DIN.ANSI code on request.

20 11 052 0020 07 2.5825 11 052 0025 07 2.7732 11 052 0032 07 3.0740 11 052 0040 07 3.7850 11 052 0050 07 4.4563 11 052 0063 07 5.84 75 11 052 0075 07 12.82 90 11 052 0090 07 18.07

110 11 052 0110 07 25.47

20 14 045 0020 11 63.1525 14 045 0025 11 64.1332 14 045 0032 11 65.7240 14 045 0040 11 70.4650 14 045 0050 11 79.7363 14 045 0063 11 86.8275 14 045 0075 11 101.6190 14 045 0090 11 111.87

110 14 045 0110 11 152.70

Blind FlangePolypropylene with steelcore drilled to ANSI 150 - grey 20 11 043 0020 11 78.93

25 11 043 0025 11 80.0932 11 043 0032 11 82.0640 11 043 0040 11 88.0150 11 043 0050 11 99.6663 11 043 0063 11 108.5375 11 043 0075 11 123.9390 11 043 0090 11 139.68

110 11 043 0110 11 191.01

Complete code when orderingInsert ‘ISO’ for NP10/16; ‘A’ for ANSI 150; ‘E’ for Table D/E

Backing Ring NP10/16Galvanised mild steel

Backing RingTable D/EGalvanised mild steel

GasketEPDM

20 860-005-11NP 8.57 25 860-007-11NP 9.07 32 860-010-11NP 10.78 40 860-012-11NP 11.45 50 860-015-11NP 12.56 63 860-020-11NP 17.75 75 860-025-11NP 24.29 90 860-030-11NP 28.09 110 860-040-11NP 35.91

Backing RingPN10Polypropylene with steelcore

20 11 014 0020 11 9.0025 11 014 0025 11 9.8832 11 014 0032 11 12.6640 11 014 0040 11 16.0550 11 014 0050 11 18.7363 11 014 0063 11 21.7275 11 014 0075 11 24.1290 11 014 0090 11 28.50

110 11 014 0110 11 33.87

Backing RingASA 150Polypropylene with steelcore

20 11 013 0020 11 9.0025 11 013 0025 11 9.8832 11 013 0032 11 12.6640 11 013 0040 11 16.0550 11 013 0050 11 18.7363 11 013 0063 11 21.7275 11 013 0075 11 24.1290 11 013 0090 11 28.50

110 11 013 0110 11 33.87

Backing RingASA 150Galvanised mild steel 20 860-005-11A 8.57

25 860-007-11A 9.07 32 860-010-11A 10.78 40 860-012-11A 11.45 50 860-015-11A 12.56 63 860-020-11A 17.75 75 860-025-11A 24.29 90 860-030-11A 28.09 110 860-040-11A 35.91

20 860-005-11E 7.58 25 860-007-11E 8.57 32 860-010-11E 9.00 40 860-012-11E 9.28 50 860-015-11E 11.37 63 860-020-11E 16.14 75 860-025-11E 24.12 90 860-030-11E 24.52 110 D 860-040-11D 31.69 110 E 860-040-11E 31.69

20 861-_-005 0.67 25 861-_-007 0.77 32 861-_-010 0.85 40 861-_-012 1.05 50 861-_-015 1.27 63 861-_-020 2.18 75 861-_-025 2.68 90 861-_-030 2.88 110 861-_-040 4.19

GasketFPM

20 862-_-005 3.10 25 862-_-007 4.60 32 862-_-010 6.08 40 862-_-012 9.77 50 862-_-015 10.66 63 862-_-020 14.04 75 862-_-025 20.34 90 862-_-030 26.50 110 862-_-040 45.23Complete code when orderingInsert ‘ISO’ for NP10/16; ‘A’ for ANSI 150; ‘E’ for Table D/E

Size Code Price Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price

Size Code Price


5

234

fusion spigot fittings

metric sizesTee 90˚

Tee 90˚Elongated

20 25 32 40 50 63 75 90

110 11 006 0110 33 37.88125 11 006 0125 33 46.18140 11 006 0140 33 51.49160 11 006 0160 33 86.04180 11 006 0180 33 101.81200 11 006 0200 33 125.69225 11 006 0225 33 235.78250 11 006 0250 33 364.99280 11 006 0280 33 463.65315 11 006 0315 33 585.96355 11 006 0355 33 819.81400 11 006 0400 33 1201.57450 11 006 0450 33 1623.79500 11 006 0500 33 2107.17

11 006 0063 17 11.7411 006 0075 17 24.0711 006 0090 17 34.3211 006 0110 17 56.8211 006 0125 17 78.7311 006 0140 17 92.7611 006 0160 17 174.4211 006 0180 17 215.0511 006 0200 17 293.0011 006 0225 17 343.3211 006 0250 17 455.7711 006 0280 17 514.9511 006 0315 17 685.6311 006 0355 17 1029.9511 006 0400 17 1408.7311 006 0450 17 1840.8211 006 0500 17 2408.97

11 006 0020 11 3.2711 006 0025 11 3.2711 006 0032 11 4.1711 006 0040 11 6.51 11 006 0050 11 8.7511 006 0063 11 13.6211 006 0075 11 27.4211 006 0090 11 40.8611 006 0110 11 60.1711 006 0125 11 82.6811 006 0140 11 101.4411 006 0160 11 176.2011 006 0180 11 255.9311 006 0200 11 323.5711 006 0225 11 384.7511 006 0250 11 543.5611 006 0280 11 734.9811 006 0315 11 1045.7011 006 0355 11 1221.2811 006 0400 11 1823.0711 006 0450 11 2407.0611 006 0500 11 3075.94

Size Code Price Code Price Code PricePN3.2 (SDR 33) PN6 (SDR 17.6) PN10 (SDR 11)

11 066 0020 11 7.1211 066 0025 11 8.1211 066 0032 11 9.6911 066 0040 11 11.9411 066 0050 11 15.8011 066 0063 11 21.7111 066 0075 11 36.1011 066 0090 11 51.2911 066 0110 11 74.9811 066 0125 11 103.0111 066 0140 11 165.3311 066 0160 11 215.0511 066 0180 11 282.1611 066 0200 11 403.4911 066 0225 11 479.4311 066 0250 11 619.5411 066 0280 11 928.2911 066 0315 11 1189.73

PN10 (SDR 11)

20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315

PN3.2 (SDR 33) PN6 (SDR 17.6)

We typically hold over

Pipe Availability

200,000 metres of pipein stock for immediate despatch

Size Code Price Code Price Code Price


5

235


ReducingTee 90˚

11 016 9032 11 42.2111 016 9050 11 43.4211 016 1132 11 62.1611 016 1150 11 63.5511 016 1263 11 88.77

11 016 1463 11 111.2711 016 1475 11 111.2711 016 1490 11 113.0611 016 1411 11 113.0611 016 1612 11 187.6611 016 1863 11 233.8211 016 1875 11 233.82

11 016 1812 11 240.7411 016 2212 11 405.48

PN10 (SDR 11)

11 016 1463 17 86.8311 016 1475 17 86.8211 016 1490 17 88.1811 016 1411 17 89.9611 016 1612 17 167.9211 016 1863 17 191.5911 016 1875 17 199.2711 016 1811 17 178.7611 016 1812 17 206.2111 016 2212 17 326.54

PN6 (SDR 17.6)PN3.2 (SDR 33)

PN3.2 (SDR 33)

90/32 90/50 110/32 110/50 125/63 125/90 140/63 140/75 140/90 140/110 160/125 180/63 180/75 180/110 180/125 225/125

ReducingTee 90˚Elongated 11 065 6332 11 22.68

11 065 6350 11 22.6811 065 7532 11 35.5111 065 7550 11 35.5111 065 7563 11 36.3011 065 9063 11 50.5111 065 9075 11 50.9011 065 1163 11 74.9811 065 1175 11 74.9811 065 1190 11 75.9711 065 1290 11 104.1611 065 1211 11 104.1611 065 1663 11 205.1911 065 1675 11 207.1711 065 1690 11 207.1711 065 1611 11 212.1311 065 1890 11 284.1011 065 1816 11 284.1011 065 2063 11 373.9111 065 2090 11 373.9111 065 2011 11 373.9111 065 2012 11 373.9111 065 2016 11 373.9111 065 2275 11 480.4411 065 2290 11 480.4411 065 2211 11 482.4411 065 2216 11 484.3911 065 2218 11 435.38

11 065 3111 11 1308.1311 065 3116 11 1308.13

11 065 3122 11 1367.2911 065 3125 11 1367.29

PN10 (SDR 11)

11 065 6350 17 21.13

11 065 7550 17 31.7811 065 7563 17 32.3711 065 9063 17 45.1911 065 9075 17 45.5811 065 1163 17 67.0711 065 1175 17 67.0711 065 1190 17 67.07

11 065 1211 17 93.1111 065 1663 17 184.2811 065 1675 17 190.0211 065 1690 17 190.0211 065 1611 17 191.7711 065 1890 17 256.4911 065 1816 17 256.4911 065 2063 17 344.3011 065 2090 17 344.3011 065 2011 17 344.3011 065 2012 17 344.3011 065 2016 17 344.3011 065 2275 17 433.0911 065 2290 17 433.0911 065 2211 17 434.0611 065 2216 17 435.0611 065 2218 17 437.03

11 065 3111 17 1203.5611 065 3116 17 1203.56

11 065 3122 17 1258.8111 065 3125 17 1258.81

PN6 (SDR 17.6)

63/32 63/50 75/32 75/50 75/63 90/63 90/75 110/63 110/75 110/90 125/90 125/110 160/63 160/75 160/90 160/110 180/90 180/160 200/63 200/90 200/110 200/125 200/160 225/75 225/90 225/110 225/160 225/180 315/90 315/110 315/160 315/200 315/225 315/250


We can provide free installer training either on site or at our bespoke training facility.

Free Training

Contact Tony Charlton orTom Tate on:

0800 975 79 71



5

236


Bend 90˚

110 11 001 0110 33 28.82 125 11 001 0125 33 32.57 140 11 001 0140 33 42.05 160 11 001 0160 33 54.85 180 11 001 0180 33 66.89 200 11 001 0200 33 82.87 225 11 001 0225 33 102.01 250 11 001 0250 33 125.28 280 11 001 0280 33 154.91 315 11 001 0315 33 220.00 355 11 001 0355 33 587.97 400 11 001 0400 33 821.76 450 11 001 0450 33 1106.86 500 11 001 0500 33 1542.92

11 001 0250 17 273.2611 001 0280 17 355.1411 001 0315 17 490.3211 001 0355 17 777.3811 001 0400 17 1083.1811 001 0450 17 1414.6411 001 0500 17 1785.59

11 001 0250 11 401.5211 001 0280 11 522.8411 001 0315 11 721.1611 001 0355 11 1055.5911 001 0400 11 1448.2111 001 0450 11 1900.0111 001 0500 11 2450.49

Size Code Price Code PricePN3.2 (SDR 33) PN6 (SDR 17.6) PN10 (SDR 11)

20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315

11 068 0063 17 11.3711 068 0075 17 16.6511 068 0090 17 21.7211 068 0110 17 45.7911 068 0125 17 58.1911 068 0140 17 84.5311 068 0160 17 93.2111 068 0180 17 115.2711 068 0200 17 142.7711 068 0225 17 175.9511 068 0250 17 316.9411 068 0280 17 461.8311 068 0315 17 576.69

PN3.2 (SDR 33) PN6 (SDR 17.6)Multi-Bend 90˚Elongated

11 068 0020 11 4.9411 068 0025 11 5.0811 068 0032 11 5.2911 068 0040 11 6.8711 068 0050 11 8.6311 068 0063 11 12.3311 068 0075 11 17.0211 068 0090 11 24.7111 068 0110 11 47.0011 068 0125 11 66.2211 068 0140 11 88.5311 068 0160 11 107.8611 068 0180 11 127.7211 068 0200 11 190.3211 068 0225 11 226.9811 068 0250 11 376.0211 068 0280 11 543.3411 068 0315 11 674.97

PN10 (SDR 11)

We deliver using our own dedicated vehicles or next day carrier. Using our standard delivery service you can expect to receive your order within 24 hours - to your warehouse, factory or job-site

Fast Delivery

Elbow 90˚Elongated

250 280 315

11 061 0250 11 452.3111 061 0280 11 685.6211 061 0315 11 857.12


Please note: Withdrawn, residual stocks only

Code Price



5

237


PN3.2 (SDR 33)Elbow 45˚Elongated

11 060 0020 11 7.1211 060 0025 11 7.6111 060 0032 11 9.1711 060 0040 11 11.4311 060 0050 11 12.9311 060 0063 11 23.6911 060 0075 11 29.4011 060 0090 11 36.7311 060 0110 11 70.4611 060 0125 11 87.0111 060 0140 11 110.4911 060 0160 11 131.4111 060 0180 11 143.8511 060 0200 11 196.5211 060 0225 11 234.7811 060 0250 11 453.8111 060 0280 11 685.6311 060 0315 11 857.27

PN10 (SDR 11)

11 060 0063 17 21.2911 060 0075 17 26.2511 060 0090 17 33.1511 060 0110 17 63.3611 060 0125 17 78.1311 060 0140 17 99.4511 060 0160 17 118.4011 060 0180 17 129.2611 060 0200 17 176.7611 060 0225 17 211.1111 060 0250 17 407.4511 060 0280 17 616.5911 060 0315 17 767.49

PN6 (SDR 17.6)

20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315

Pipe supports should be free of sharp edges which can damage a pipe wall. Care should also be taken to ensure that supports allow for expansion and contraction of the pipe without restraint.

Polypropylene pipework requires more support than for metallic systems. As working temperature increases, the distance between supports is reduced.

Pipe Supports

16 0.75 0.65 0.40 20 0.80 0.65 0.45 25 0.85 0.75 0.50 32 1.00 0.85 0.55 40 1.10 0.95 0.60 50 1.25 1.05 0.70 63 1.40 1.20 0.80 75 1.55 1.30 0.85 90 1.65 1.45 0.95110 1.85 1.60 1.05125 2.00 1.70 1.10140 2.10 1.80 1.15160 2.25 1.90 1.25180 2.40 2.00 1.30200 2.50 2.15 1.35225 2.65 2.30 1.45250 2.75 2.35 1.50280 2.90 2.45 1.60315 3.05 2.60 1.65355 3.20 2.70 1.75400 3.40 2.90 1.85450 3.70 3.15 2.00500 3.85 3.25 2.05560 4.10 3.50 2.25630 4.35 3.70 2.40

PN10 Support Centres/m Pipe Size 20˚C 60˚C 100˚Ci


* Also available pupped - enquire for details

Large diameter, segmented bends upto 1200mm available on request.For further information please contact our sales team.


5

238


ReducerConcentric

25 x 2032 x 2032 x 2540 x 2040 x 2540 x 3250 x 2550 x 3250 x 4063 x 3263 x 4063 x 5075 x 3275 x 4075 x 5075 x 6390 x 5090 x 6390 x 75

110 x 50110 x 63110 x 75110 x 90125 x 63125 x 75125 x 90

125 x 110140 x 75140 x 90

140 x 110 140 x 125

160 x 90 160 x 110 160 x 125 160 x 140

180 x 90 180 x 110 180 x 125 180 x 140 180 x 160 200 x 140 200 x 160 200 x 180 225 x 140 225 x 160 225 x 180 225 x 200 250 x 160 250 x 180 250 x 200 250 x 225 280 x 200 280 x 225 280 x 250 315 x 200 315 x 225 315 x 250 315 x 280

Size Code PricePN10 (SDR 11)

11 009 7563 17 14.99

11 009 9063 17 16.79 11 009 9075 17 16.79

11 009 1163 17 21.29 11 009 1175 17 21.29 11 009 1190 17 21.29 11 009 1263 17 27.42 11 009 1275 17 27.42 11 009 1290 17 27.42 11 009 1211 17 27.42 11 009 1475 17 33.15 11 009 1490 17 33.15 11 009 1411 17 33.15 11 009 1412 17 33.15 11 009 1690 17 38.67 11 009 1611 17 38.67 11 009 1612 17 38.67 11 009 1614 17 38.67 11 009 1890 17 60.77 11 009 1811 17 57.23 11 009 1812 17 52.68 11 009 1814 17 50.12 11 009 1816 17 47.74 11 009 2014 17 136.94 11 009 2016 17 120.94 11 009 2018 17 108.12 11 009 2214 17 163.38 11 009 2216 17 140.28 11 009 2218 17 133.57 11 009 2220 17 117.60 11 009 2516 17 187.25 11 009 2518 17 173.23 11 009 2521 17 159.24 11 009 2522 17 151.13 11 009 2820 17 209.15 11 009 2822 17 194.34 11 009 2825 17 189.23 11 009 3120 17 266.37 11 009 3122 17 235.78 11 009 3125 17 215.05 11 009 3128 17 201.26

PN6 (SDR 17.6)

11 009 2520 11 8.38 11 009 3220 11 9.69 11 009 3225 11 9.69 11 009 4020 11 11.06 11 009 4025 11 11.06 11 009 4032 11 11.06 11 009 5025 11 11.67 11 009 5032 11 11.67 11 009 5040 11 11.67 11 009 6332 11 14.12 11 009 6340 11 14.12 11 009 6350 11 14.12 11 009 7532 11 18.07 11 009 7540 11 18.07 11 009 7550 11 18.07 11 009 7563 11 18.07 11 009 9050 11 20.14 11 009 9063 11 20.14 11 009 9075 11 20.14 11 009 1150 11 25.66 11 009 1163 11 25.66 11 009 1175 11 25.66 11 009 1190 11 25.66 11 009 1263 11 32.96 11 009 1275 11 32.96 11 009 1290 11 32.96 11 009 1211 11 32.96 11 009 1475 11 39.86 11 009 1490 11 39.86 11 009 1411 11 39.86 11 009 1412 11 38.10 11 009 1690 11 46.78 11 009 1611 11 46.78 11 009 1612 11 46.78 11 009 1614 11 46.78 11 009 1890 11 73.21 11 009 1811 11 69.07 11 009 1812 11 63.55 11 009 1814 11 60.39 11 009 1816 11 57.60 11 009 2014 11 164.93 11 009 2016 11 146.01 11 009 2018 11 130.64 11 009 2214 11 196.89 11 009 2216 11 169.10 11 009 2218 11 161.01 11 009 2220 11 141.90 11 009 2516 11 225.93 11 009 2518 11 209.15 11 009 2521 11 192.18 11 009 2522 11 182.12 11 009 2820 11 251.56 11 009 2822 11 234.78 11 009 2825 11 225.93 11 009 3120 11 321.60 11 009 3122 11 284.10 11 009 3125 11 258.45 11 009 3128 11 242.69

Code PricePN3.2 (SDR 33)

ReducerConcentric

63 x 1675 x 32

110 x 63 11 007 1163 33 16.39125 x 75 11 007 1275 33 18.74

160 x 110 11 007 1611 33 59.39 225 x 160 11 007 2216 33 150.16 315 x 225 11 007 3122 33 173.23 450 x 315 11 007 4531 33 591.91 630 x 450 11 007 6345 33 733.96


11 007 7532 17 12.62 11 007 1163 17 17.27 11 007 1275 17 19.64 11 007 1611 17 63.92 11 007 2216 17 168.72 11 007 3122 17 191.22 11 007 4531 17 656.06 11 007 6345 17 990.47

Code PricePN6 (SDR 17.6)

11 007 6316 11 8.60 11 007 7532 11 13.72 11 007 1163 11 18.23 11 007 1275 11 20.51 11 007 1611 11 68.46 11 007 2216 11 185.68 11 007 3122 11 205.19 11 007 4531 11 729.04


Code Price


5

239


ReducerConcentric - elongated

25 x 2032 x 2032 x 2540 x 2040 x 2540 x 3250 x 2550 x 3250 x 4063 x 3263 x 4063 x 5075 x 5075 x 6390 x 6390 x 75

110 x 63110 x 90125 x 63125 x 90

125 x 110 140 x 125

160 x 90 160 x 110 160 x 125 160 x 140 180 x 125 180 x 160 200 x 160 225 x 160 250 x 160 250 x 200 250 x 225 280 x 250 315 x 200 315 x 250

Size Code PricePN10 (SDR 11)PN6 (SDR 17.6)

11 067 2520 11 4.7511 067 3220 11 5.2411 067 3225 11 5.2411 067 4020 11 7.6111 067 4025 11 7.6111 067 4032 11 7.6111 067 5025 11 9.3911 067 5032 11 9.3911 067 5040 11 9.3911 067 6332 11 12.4411 067 6340 11 12.4411 067 6350 11 12.4411 067 7550 11 19.2411 067 7563 11 19.2411 067 9063 11 27.0611 067 9075 11 27.2211 067 1163 11 42.9911 067 1190 11 42.9911 067 1263 11 43.6311 067 1290 11 43.6311 067 1211 11 43.6311 067 1412 11 62.5511 067 1690 11 83.6611 067 1611 11 83.8711 067 1612 11 83.8711 067 1614 11 84.2611 067 1812 11 108.5311 067 1816 11 108.5311 067 2016 11 119.0011 067 2216 11 191.3811 067 2516 11 259.4711 067 2521 11 271.3011 067 2522 11 271.3011 067 2825 11 361.0611 067 3120 11 464.6511 067 3125 11 464.25

Code Price Code PricePN3.2 (SDR 33)

ReducerEccentric - elongated

25 x 2032 x 2540 x 2540 x 3250 x 3250 x 4063 x 3263 x 4063 x 5075 x 5075 x 6390 x 6390 x 75

110 x 63110 x 90125 x 63125 x 90

125 x 110 140 x 125

160 x 90 160 x 110 160 x 125 160 x 140

180 x 90 180 x 125 180 x 160 200 x 160 200 x 180 225 x 160 225 x 180 225 x 200 250 x 200 250 x 225


Code PricePN6 (SDR 17.6)

11 069 2520 11 5.2411 069 3225 11 6.0311 069 4025 11 8.3011 069 4032 11 8.3011 069 5032 11 10.2711 069 5040 11 10.2711 069 6332 11 14.8111 069 6340 11 14.8111 069 6350 11 14.8111 069 7550 11 22.8911 069 7563 11 22.8911 069 9063 11 31.9711 069 9075 11 31.9711 069 1163 11 42.9911 069 1190 11 42.9911 069 1263 11 51.7011 069 1290 11 51.7011 069 1211 11 51.7011 069 1412 11 74.4011 069 1690 11 99.2411 069 1611 11 99.2411 069 1612 11 99.2411 069 1614 11 99.2411 069 1890 11 129.0311 069 1812 11 129.0311 069 1816 11 129.0311 069 2016 11 141.2911 069 2018 11 141.2911 069 2216 11 227.8911 069 2218 11 227.8911 069 2220 11 227.8911 069 2521 11 323.5711 069 2522 11 298.91



5

240


CapElongated

11 064 0020 11 5.4211 064 0025 11 6.0311 064 0032 11 7.6111 064 0040 11 9.3911 064 0050 11 12.2411 064 0063 11 16.1011 064 0075 11 25.0611 064 0090 11 37.8811 064 0110 11 51.2911 064 0125 11 55.4611 064 0140 11 69.2511 064 0160 11 77.5411 064 0180 11 100.8411 064 0200 11 125.6911 064 0225 11 149.9511 064 0250 11 224.9411 064 0280 11 319.6411 064 0315 11 429.18

PN10 (SDR 11)

20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315

Size Code Price Code PricePN3.2 (SDR 33) PN6 (SDR 17.6)

Code Price

CapShort

11 004 0355 11 455.9211 004 0400 11 610.6711 004 0450 11 847.4211 004 0500 11 1063.46

PN10 (SDR 11)

355 400 450 500

Size Code Price Code PricePN3.2 (SDR 33) PN6 (SDR 17.6)

Code Price

20 25 32 40 50 63 75 90

Size Code PriceUnionFPM seals

PN10 (SDR 11)

11 024 0120 11 22.0911 024 0125 11 24.0711 024 0132 11 28.9911 024 0140 11 40.8611 024 0150 11 57.8111 024 0163 11 78.7311 024 0175 11* 98.5511 024 0190 11* 101.90

Code Price

20 x 1/2 25 x 3/4 32 x 1 40 x 11/4 50 x 11/2 63 x 2

Size Code PriceMale AdaptorBSP or NPT male thread

11 033 2021 11 7.8311 033 2526 11 9.3911 033 3233 11 11.7411 033 4041 11 14.1211 033 5051 11 23.2911 033 6364 11 29.40

PN10-NPT

11 033 2020 11 7.8311 033 2525 11 9.3911 033 3232 11 11.7411 033 4040 11 14.1211 033 5050 11 23.2911 033 6363 11 29.40

PN10-BSPCode Price Code Price

20 x 1/2 25 x 3/4 32 x 1 40 x 11/4 50 x 11/2 63 x 2

Size Code PriceFemale AdaptorBSP or NPT femalethread

11 032 2021 11 10.0011 032 2526 11 11.2811 032 3233 11 14.6811 032 4041 11 16.7911 032 5051 11 26.4511 032 6364 11 33.15

PN10-NPT

11 032 2020 11 10.0011 032 2525 11 11.2811 032 3232 11 14.6811 032 4040 11 16.7911 032 5050 11 26.4511 032 6363 11 33.15

PN10-BSPCode Price Code Price

PTFE TapeBS7786

12x12x0.075mm 767-120 1.10Size Code Price

* Supplied with beige grey PVDF nut


5

241

fusion spigot flanges

20 25 32 40 50 63 75 90

110 11 012 0110 33 17.45125 11 012 0125 33 21.49140 11 012 0140 33 24.89160 11 012 0160 33 30.77180 11 012 0180 33 44.98 200 11 012 0200 33 54.06225 11 012 0225 33 60.56250 11 012 0250 33 85.43280 11 012 0280 33 92.15315 11 012 0315 33 110.49 355 11 012 0355 33 188.82400 11 012 0400 33 392.66450 11 012 0450 33 459.71500 11 012 0500 33 558.37560 11 012 0560 33 660.00630 11 012 0630 33 760.61

11 012 0063 17 7.7211 012 0075 17 9.0811 012 0090 17 13.2111 012 0110 17 17.4511 012 0125 17 21.4911 012 0140 17 24.8911 012 0160 17 30.7711 012 0180 17 44.9811 012 0200 17 56.2511 012 0225 17 62.9511 012 0250 17 89.9611 012 0280 17 98.8611 012 0315 17 120.7311 012 0355 17 207.1711 012 0400 17 418.2911 012 0450 17 493.2811 012 0500 17 607.6911 012 0560 17 727.0611 012 0630 17 842.47

11 012 0020 11 4.1711 012 0025 11 4.1711 012 0032 11 4.8211 012 0040 11 5.8411 012 0050 11 7.1211 012 0063 11 8.9011 012 0075 11 10.5011 012 0090 11 14.9911 012 0110 11 19.3311 012 0125 11 23.2911 012 0140 11 27.2211 012 0160 11 34.3211 012 0180 11 53.0711 012 0200 11 58.6011 012 0225 11 65.1311 012 0250 11 98.8611 012 0280 11 108.1211 012 0315 11 127.2911 012 0355 11 225.9311 012 0400 11 444.9311 012 0450 11 521.8811 012 0500 11 660.00


Also available to JIS standards.Please enquire for details.*Machined.

Also available to ANSI or JIS standards.Please enquire for details.

Stub FlangeElongated

11 062 0020 11 5.7311 062 0025 11 6.0311 062 0032 11 7.0211 062 0040 11 8.3011 062 0050 11 10.1511 062 0063 11 12.7311 062 0075 11 16.4711 062 0090 11 21.4911 062 0110 11 27.4211 062 0125 11 33.3611 062 0140 11 42.9911 062 0160 11 49.1311 062 0180 11 75.7711 062 0200 11 86.4311 062 0225 11 93.1111 062 0250 11 143.0611 062 0280 11 217.0511 062 0315 11 275.26

PN10 (SDR 11)

20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315

PN6 (SDR 17.6)PN3.2 (SDR 33)Size Code Price Code Price Code Price

Stub FlangeDIN 16962Short Spigot

20 25 32 40 50 63 75 90 110 125 160 200 225 250 315 355 400 450

11 012 1020 11 4.4511 012 1025 11 4.4811 012 1032 11 5.3211 012 1040 11 6.3211 012 1050 11 7.7211 012 1063 11 9.6311 012 1075 11 11.4011 012 1090 11 16.2611 012 1110 11 21.0211 012 1125 11 25.3711 012 1160 11 41.0811 012 1200 11 81.8211 012 1225 11 79.9211 012 1250 11 136.1311 012 1315 11 191.1911 012 1355 11 271.5311 012 1400 11 486.2411 012 1450 11 626.56


Also available to JIS standards.Please enquire for details.*Machined.

Stub FlangeANSIShort Spigot


5

242


Also available to ANSI or JIS standards.Please enquire for details.

20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 355 400

14 045 0020 11 63.1514 045 0025 11 64.1314 045 0032 11 65.7214 045 0040 11 70.4614 045 0050 11 79.7314 045 0063 11 86.8214 045 0075 11 101.6114 045 0090 11 111.8714 045 0110 11 152.7014 045 0125 11 152.7014 045 0140 11 187.6614 045 0160 11 236.7414 045 0180 11 236.7414 045 0200 11 263.4114 045 0225 11 263.4114 045 0250 11 344.3014 045 0280 11 344.3014 045 0315 11 502.1314 045 0355 11 980.6114 045 0400 11 1120.69

PN10 (SDR 11)Blind FlangePolypropylene with steelinsert - black


Suitable for use with butterfly valves

Stub FlangeChamfered

11 012 9110 11 24.0711 012 9140 11 33.9511 012 9160 11 42.8511 012 9180 11 66.5111 012 9200 11 73.2111 012 9225 11 81.5011 012 9250 11 123.7211 012 9280 11 135.1711 012 9315 11 159.0111 012 9355 11 197.4711 012 9400 11 353.63

PN10 (SDR 11)

110 140 160 180 200 225 250 280 315 355 400

PN6 (SDR 17.6)PN3.2 (SDR 33)Size Code Price Code Price Code Price

Technoshield® is the most advanced preventative control system able to minimize the risk involved with spray out of chemicals from flange joints. Technoshield® fabric products use multiple layers of high performance fabrics wrapped around flanges. Fix firmly in place by high endurance tightening cords.

The Technoshield® fabric is scientifically researched and technically tested to be thin, resistant, and outstandingly safe. It resists up to 250°C and has the widest range of resistance to chemicals.

Technoshield® is composed of high endurance fabrics that provide a unique strength against mechanical stresses.These systems are designed to be suitable both for internal and external environments.

Available materials are: FG-PTFE, Pure PTFE, PVC, Polyethylene, and Polypropylene.

For more information on the range available, please contact our sales office.

Flange Guards NEW

FG-PTFE

PTFE

PVC

PE

PP


5

243


20 861-_-005 0.67 25 861-_-007 0.77 32 861-_-010 0.85 40 861-_-012 1.05 50 861-_-015 1.27 63 861-_-020 2.18 75 861-_-075 2.68 90 861-_-031 2.88 110 861-_-041 4.19 125 861-_-040 4.19 140 861-_-051 5.38 160 861-_-061 6.17 180 861-_-180 12.25 200 861-_-080 12.25 225 861-_-082 12.25 250 861-_-100 15.04 280 861-_-101 15.04 315 861-_-121 17.04 355 861-_-141 24.02 400 861-_-161 26.47

862-_-005 3.10 862-_-007 4.60 862-_-010 6.08 862-_-012 9.77 862-_-015 10.66 862-_-020 14.04 862-_-075 20.34 862-_-031 26.50 862-_-041 45.23 862-_-040 45.23 862-_-051 75.49 862-_-061 75.49 862-_-180 90.40 862-_-080 90.41 862-_-082 90.40 862-_-100 123.07 862-_-101 123.07 862-_-121 128.48 862-_-141 200.44 862-_-161 230.88

EPDMStub Gasket FPM Size Code Price Code Price

20 14 014 0020 11* 9.0025 14 014 0025 11* 9.8832 14 014 0032 11* 12.6640 14 014 0040 11* 16.0550 14 014 0050 11* 18.7363 14 014 0063 11* 21.7275 14 014 0075 11* 24.1290 14 014 0090 11* 28.50

110 14 014 0110 11* 33.87 125 14 014 0125 11* 33.87 140 14 014 0140 11* 52.17 160 14 014 0160 11* 59.75 180 14 014 0180 11* 59.75 200 14 014 0200 11* 85.06 225 14 014 0225 11* 85.06 250 14 014 0250 11* 135.83 280 14 014 0280 11* 135.83 315 14 014 0315 11* 170.68 355 14 014 0355 11* 359.51 400 14 014 0400 11* 407.30 450 14 014 0450 11* 503.91 500 14 014 0500 11* 503.91 560 14 014 0560 11* 683.13 630 14 014 0630 11* 683.13

11 014 0020 11 9.0011 014 0025 11 9.8811 014 0032 11 12.6611 014 0040 11 16.0511 014 0050 11 18.7311 014 0063 11 21.7211 014 0075 11 24.1211 014 0090 11 28.5011 014 0110 11 33.8711 014 0125 11 33.8711 014 0140 11 52.1711 014 0160 11 59.7511 014 0180 11 59.7511 014 0200 11 85.0611 014 0225 11 85.0611 014 0250 11 135.8311 014 0280 11 135.8311 014 0315 11 170.6811 014 0355 11 359.5111 014 0400 11 407.3011 014 0450 11 503.9111 014 0500 11 503.91

PN10PN10Backing RingPolypropylene with steelcore -

- -

- -

- -

- -

- -

- - 14 014 1200 11 131.46 14 014 1225 11 131.42 14 014 1250 11 195.58 14 014 1280 11 192.60 14 014 1315 11 223.34 14 014 1355 11 444.37 14 014 1400 11 491.10 -

- -

-

PN16 Size Code Price Code Price Code Price

*Black

Backing RingGalvanised Mild Steel

20 860-005-12NP 8.57 25 860-007-12NP 9.07 32 860-010-12NP 11.08 40 860-012-12NP 11.77 50 860-015-12NP 12.56 63 860-020-11NP 17.75 75 860-025-11NP 24.29 90 860-030-11NP 28.09 110 860-040-11NP 35.91 125 860-125-11NP 50.01 140 860-050-12NP 50.01 160 860-060-14NP 55.98 180 860-180-11NP 65.72 200 860-080-11N 80.20 225 860-080-14N 82.45 250 860-100-13N 116.64 280 860-280-11N 111.34 315 860-120-15N 151.36 355 860-140-12N 422.11 400 860-160-12N 518.11

860-005-12A 8.57860-007-12A 9.07860-010-12A 10.78860-012-12A 11.45860-015-12A 12.56860-020-11A 17.75860-025-11A 24.29860-030-11A 28.09860-040-11A 35.91860-125-11A 50.01860-050-12A 50.01860-060-14A 55.98860-180-11A 65.72860-080-11A 80.20860-080-14A 78.69860-100-13A 111.34860-280-11A 111.34860-120-15A 151.36860-140-12A 422.11860-160-12A 518.11

PN10 ANSI 150 Size Code Price

Complete code when orderingInsert ‘ISO’ for NP10/16; ‘A’ for ANSI 150; ‘E’ for Table D/E

Code Price

Also available in ANSI 150, please enquire for details


5

244

couplings

The Chemical Resistant Flexible Sealing SolutionManufactured from FKM synthetic rubber, the new Patent Pending VIPSealChem is the latest addition to the VIPSeal® range for use in low and non-pressurised applications where a high chemical resistance is required and other synthetic rubber materials such as EPDM, SBR and NBR are unsuitable.

VIPSealChem couplings are manufactured to meet the demanding requirements of EN681-1 WB/WD and EN295-4 and provide a flexible and watertight connection on above and below ground drainage systems that require high resistance to a wide range of chemicals. VIPSealChem also operates in a wide range of temperatures.

Reduced Installation Times

As VIPSealChem’s chemical resistant properties lie in the FKM synthetic rubber that is used to manufacture the seal, there is no need for the use of a fluoropolymer (FEP) liner or expanded PTFE seals (which are commonly used on other chemical resistant sealing solutions).

Because of this, they are as simple to install as any other seal within the VIPSeal® range, allowing dramatic time savings to be made on both installation and repairs along with providing a more consistent sealing performance.

Increased Range of Applications

By not using a fluoropolymer (FEP) liner or expanded PTFE seals, VIPSealChem is able to be manufactured as an adaptor coupling. This application allows pipes with significantly different outside diameters to be joined, ensuring VIPSealChem can be used without the need to make further alterations to existing pipes or prefabricated structures.

Standard couplings

a. If repairing an existing section of pipe - Cut section from the pipeline using pipe cutter ordisc saw and remove. This should be about 20mm longer than the junction or new section

of pipe to be installed.

1. Mark off half a coupling width from each joint on each pipe section.

2. Loosen the tension and shear bands on the coupling and then slide the coupling onto eachend of the existing pipe line (lubricant not required).

3. Position the new junction or pipe length and centre a coupling over one joint at a time usingthe marks previously made then begin to tighten up the worm drives, starting with thetension bands followed by the shear band.

4. Check each tension and shear band with a torque wrench to the recommended torqueshown on each coupling. Once completed, carefully tamp bedding under the pipeline ifapplicable.

Drain couplings

1. Mark off half a coupling width from each joint on each pipe section.

2. Loosen the tension bands on the coupling and then slide the coupling onto each end of theexisting pipe line (lubricant not required).

3. Position the new junction or pipe length and centre a coupling over one joint at a time usingthe marks previously made then begin to tighten the tension bands.

4. Check each tension band with torque wrench to the recommended torque shown on eachcoupling. Once completed, carefully tamp bedding under the pipeline if applicable.

Adaptor couplings

1. Slide the coupling fully onto the larger pipe.

2. Measure the depth of the smaller end of the coupling and mark the length on the smallerpipe.

3. Insert the smaller pipe up to the mark and begin to tighten the tension bands.

4. Check each tension band with a torque wrench to the recommended torque shown on eachcoupling. Once completed, carefully tamp bedding under the pipeline if applicable.


5

245

couplings

Size Width mm to mm mm Code Price

100 - 115 100 VSC115FKM 57.22120 - 137 120 VSC137FKM 65.19140 - 165 120 VSC165FKM 78.11175 - 200 150 VSC200FKM 113.76240 - 265 150 VSC265FKM 139.00265 - 290 150 VSC290FKM 179.30295 - 320 190 VSC320FKM 255.92355 - 385 190 VSC385FKM 258.10

Standard Coupling

Size Width mm to mm mm Code Price

32 - 40 68 VDC40FKM 19.0340 - 50 68 VDC50FKM 19.9950 - 65 90 VDC65FKM 26.6465 - 75 108 VDC75FKM 35.4080 - 95 100 VDC95FKM 45.46

100 - 115 100 VDC115FKM 54.58140 - 165 120 VDC165FKM 71.83190 - 215 150 VDC215FKM 132.53

Drain Coupling

Size Width mm to mm mm Code Price 48-56 - 110-122 100 VAC1225FKM 63.58 80-95 - 110-122 100 VAC1221FKM 63.58 110-115 - 110-125 100 VAC5144FKM 56.04 110-121 - 121-136 100 VAC4000FKM 41.74 100-115 - 121-136 100 VAC1362FKM 65.76 110-122 - 144-160 120 VAC1602FKM 74.98 121-136 - 144-160 120 VAC1603FKM 81.72 110-122 - 170-192 120 VAC1922FKM 87.58 121-136 - 170-192 120 VAC1923FKM 102.10 144-160 - 170-192 120 VAC1924FKM 102.10 130-145 - 180-200 150 VAC2000FKM 121.92

Adaptor Coupling

Tub Size Code Price 0.5kg VIN-0.5 5.96 1kg VIN-1.0 7.76 2.5kg VIN-2.5 15.78

Lubricant (VIN)Universal Pipe Lubricant from VIPSeal® is a pipe-jointing compound that has been specially formulated for use with water pipes and mains. Based on a vegetable soap lubricant it enables quick and easy repair of sealing joints on nearly all pipe materials including rubber, plastic, clay, cast iron and concrete.

As per the VIPSeal® range, for general applications, VIPSealChem shear and tension bands are manufactured from 1.4301 (304) austenitic stainless steel.

For higher corrosion or contaminated ground areas and marine environments, grade 1.4401 (316) should be specified to eliminate the needfor protective tape.

Shear & Tension Bandsi

Industry Applications

Due to its high resistance to a wide range of chemicals and temperatures, VIPSealChem is suitable for the following applications:

Chemical and Process Industries

Pharmaceutical, Medical and Research Laboratories

Food Processing Plants Breweries


5

246

pp flame retardent

Pipe PPs

pipe and fittings

20 - - - 25 - - -

32 - - - 40 - - - 50 3.0 17 705 0050 00 63 3.0 17 705 0063 00 75 3.0 17 705 0075 00 90 3.0 17 705 0090 00

110 3.0 17 705 0110 00 125 3.0 17 705 0125 00 140 3.0 17 705 0140 00 24.05 160 3.0 17 705 0160 00 27.89 180 3.0 17 705 0180 00 31.19 200 3.0 17 705 0200 00 34.62 225 3.5 17 705 0225 00 44.99 250 3.5 17 705 0250 00 50.12 280 4.0 17 705 0280 00 63.42 315 5.0 17 705 0315 00 89.49 355 5.0 17 705 0355 00 100.95 400 6.0 17 705 0400 00 134.66 450 6.0 17 705 0450 00 158.36 500 8.0 17 705 0500 00 233.84 560 8.0 17 705 0560 00 262.35 630 10.0 17 705 0630 00 366.90 710 12.0 17 705 0710 00 494.28 800 12.0 17 705 0800 00 557.00 900 15.0 17 705 0900 00 850.42 1000 15.0 17 705 1000 00 947.45 1200 18.0 17 705 1200 00 1572.87

Wall Code Price/mSize - - - -

- -- -- -

17 705 0063 33 6.22- -- -

- -- -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Code Price/m 17 705 0020 11 2.44 17 705 0025 11 3.30 17 705 0032 11 4.70 17 705 0040 11 6.67 17 705 0050 11 10.35 17 705 0063 11 16.41 17 705 0075 11 22.96 17 705 0090 11 33.16 17 705 0110 11 49.27 - - 17 705 0140 11 79.56 17 705 0160 11 104.45 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Code Price/m


Ventilation PN3.2/S-16/SDR33 PN10/S-5/SDR11

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

20 - - 25 - -

32 - - 40 - - 50 - -63 - -75 - -90 - -

110 - - 140 - - 160 - - 180 - - 200 - - 225 - - 250 - - 280 - - 315 - -

Code PriceSize - - - - - - - - - - - - - - - - 17 006 0110 33 45.56 - - 17 006 0160 33 103.78 17 006 0180 33 138.97 17 006 0200 33 151.84 17 006 0225 33 284.52 17 006 0250 33 440.01 17 006 0280 33 560.22 17 006 0315 33 708.74

Code Price 17 006 0020 11 4.40 17 006 0025 11 4.40 17 006 0032 11 5.49 17 006 0040 11 8.68 17 006 0050 11 11.72 17 006 0063 11 18.20 17 006 0075 11 36.73 17 006 0090 11 54.80 17 006 0110 11 80.51 17 006 0140 11 140.44 17 006 0160 11 236.27 - - - - - - - - - - - -

Code Price

Tee 90º PN2.5 (SDR 41) PN3.2 (SDR 33) PN10 (SDR 11)

Flame

retardent

grade


5

247

pp flame retardent

20 - - 25 - -32 - -40 - -50 - -63 - -75 - -90 - -

110 - - 140 - - 160 - -

180 - - 200 - - 225 - - 250 - - 280 - - 315 - - 355 - - 400 - -

Code PriceSize - - - - - - - - - - - - - - - - 17 001 0110 33 34.81 - - 17 001 0160 33 66.15 17 001 0180 33 80.59 17 001 0200 33 99.96 17 001 0225 33 123.05 17 001 0250 33 151.81 17 001 0280 33 187.02 17 001 0315 33 265.19 17 001 0355 33 708.96 17 001 0400 33 944.23

Code Price 17 001 0020 11 5.46 - - 17 001 0032 11 5.87 17 001 0040 11 7.62 17 001 0050 11 9.56 17 001 0063 11 13.70 17 001 0075 11 18.87 17 001 0090 11 27.38 17 001 0110 11 52.14 17 001 0140 11 98.23 17 001 0160 11 119.66 - - - - - - - - - - - - - - - -

Code Price

Bend 90º PN2.5 (SDR 41) PN3.2 (SDR 33) PN10 (SDR 11)

63x16 - - 75x32 - -

110x63 - - 125x75 - - 160x110 - - 225x160 - - 315x225 - -

Size - - - - 17 007 1163 33 19.78 17 007 1275 33 22.61 17 007 1611 33 71.64 17 007 2216 33 181.69 17 007 3122 33 209.06

17 007 6316 11 10.35 17 007 7532 11 16.61 17 007 1163 11 22.00 17 007 1275 11 24.82 17 007 1611 11 82.68 - - - -

Code Price

ReducerConcentric

PN2.5 (SDR 41) PN3.2 (SDR 33) PN10 (SDR 11)

20 - - 25 - -32 - -40 - -50 - -63 - -75 - -90 - -

110 - - 125 - - 140 - -

160 - - 180 - - 200 - - 225 - - 250 - - 280 - - 315 - - 355 - - 400 - - 500 - -

Code PriceSize - - - - - - - - - - - - - - - - 17 012 0110 33 21.12 - - - - 17 012 0160 33 37.15 17 012 0180 33 54.29 17 012 0200 33 63.93 17 012 0225 33 73.11 17 012 0250 33 93.80 17 012 0280 33 111.24 17 012 0315 33 133.26 17 012 0355 33 227.98 17 012 0400 33 474.76 17 012 0500 33 675.21

Code Price 17 012 0020 11 4.98 17 012 0025 11 4.98 17 012 0032 11 5.84 17 012 0040 11 7.00 17 012 0050 11 8.49 17 012 0063 11 10.68 17 012 0075 11 12.54 17 012 0090 11 18.08 17 012 0110 11 23.25 - - 17 012 0140 11 32.76 17 012 0160 11 41.30 - - - - - - - - - - - - - - - - - -

Code Price

Stub Flange PN2.5 (SDR 41) PN3.2 (SDR 33) PN10 (SDR 11)

Refer to page 243 for backing rings and gaskets

Code PriceCode Price


5

248

pp flame retardent - electrically conductive

Pipe PPs-el

pipe and fittings

32 - - 50 - - 63 - - 75 - - 90 - - 110 3.0 19 705 0110 00 93.98 160 3.0 19 705 0160 00 137.88 180 3.0 19 705 0180 00 155.35 200 3.0 19 705 0200 00 172.77 225 3.5 19 705 0225 00 219.03 250 3.5 19 705 0250 00 262.22 315 5.0 19 705 0315 00 440.41 355 5.0 19 705 0355 00 497.10 400 6.0 19 705 0400 00 561.40

- - - - - - - - 19 705 0090 33 61.66 19 705 0110 33 93.84 19 705 0160 33 192.35 - - 19 705 0200 33 298.81 19 705 0225 33 370.21 - - 19 705 0315 33 726.61 - - - -

Code Price/mWall Code Price/mSize - - - - - - - - - - 19 705 0110 17 161.35 19 705 0160 17 339.15 - - 19 705 0200 17 526.75 - - - - - - - - - -

Code Price/m 19 705 0032 11 20.13 19 705 0050 11 51.84 19 705 0063 11 81.98 19 705 0075 11 114.36 19 705 0090 11 165.30 19 705 0110 11 222.56 - - - - - - - - - - - - - - - -

Code Price/m

Standard length 5mPlease note that a transportation surcharge may be applied on pipe diameters 250mm or larger - please enquire for details

Ventilation PN3.2/S-16/SDR33 PN6/S-8.3/SDR17 PN10/S-5/SDR11

32 - - 50 - -

63 - - 75 - - 90 - -

110 19 006 0110 33 72.14 160 19 006 0160 33 164.30 200 19 006 0200 33 240.60 225 19 006 0225 33 450.64 250 19 006 0250 33 697.20 315 19 006 0315 33 1119.72

Code PriceSize - - - - - - - - - - 19 006 0110 17 108.43 19 006 0160 17 333.55 19 006 0200 17 559.52 - - - - - -

Code Price 19 006 0032 11 8.66 19 006 0050 11 18.56 19 006 0063 11 28.83 19 006 0075 11 58.22 19 006 0090 11 86.22 19 006 0110 11 128.55 - - - - - - - - - -

Code Price

Tee 90º PN3.2 (SDR 33) PN6 (SDR 17.6) PN10 (SDR 11)

Electrically

conductive

grade


5

249

pp flame retardent - electrically conductive

32 - - 50 - -63 - -75 - -90 - -

110 19 001 0110 33 55.11160 19 001 0160 33 104.75200 19 001 0200 33 158.42225 19 001 0225 33 194.90

250 19 001 0250 33 239.54 315 19 001 0315 33 420.46

Code PriceSize - - - - - - - - - - 19 001 0110 17 80.49 19 001 0160 17 163.83 19 001 0200 17 248.66 - - - - - -

Code Price 19 001 0032 11 9.36 19 001 0050 11 15.14 19 001 0063 11 21.70 19 001 0075 11 29.96 19 001 0090 11 43.33 19 001 0110 11 83.29 - - - - - - - - - -

Code Price

Bend 90º PN3.2 (SDR 33) PN6 (SDR 17.6) PN10 (SDR 11)

63x16 - - 75x32 - - 110x63 - - 160x110 19 007 1611 33 113.45 225x160 19 007 2216 33 287.18 315x225 19 007 3122 33 331.13

Code PriceSize - - - - - - 19 007 1611 17 115.44 19 007 2216 17 322.42 - -

Code Price 19 007 6316 11 16.44 19 007 7532 11 26.24 19 007 1163 11 34.79 - - - - - -

Code Price

ReducerConcentric

PN3.2 (SDR 33) PN6 (SDR 17.6) PN10 (SDR 11)

32 - - 50 - -63 - -75 - -90 - -

110 19 012 0110 33 33.41 160 19 012 0160 33 58.86200 19 012 0200 33 103.31225 19 012 0225 33 115.88

250 19 012 0250 33 163.39 315 19 012 0315 33 211.07

Code PriceSize - - - - - - - - - - 19 012 0110 17 33.41 19 012 0160 17 58.86 19 012 0200 17 107.46 - - - - - -

Code Price 19 012 0032 11 9.18 19 012 0050 11 13.50 19 012 0063 11 16.86 19 012 0075 11 19.97 19 012 0090 11 28.62 19 012 0110 11 37.11 - - - - - - - - - -

Code Price

Stub Flange PN3.2 (SDR 33) PN6 (SDR 17.6) PN10 (SDR 11)

32 19 014 0032 11 26.50 50 19 014 0050 11 39.1563 19 014 0063 11 45.1875 19 014 0075 11 50.1290 19 014 0090 11 59.63

110 19 014 0110 11 95.15 140 - -

160 19 014 0160 11 138.60200 - -225 - -

250 - - 315 - -

Code PriceSize

Backing RingBS 4504 EN1072 NP10

PPs-el

Refer to page 243 for backing rings and gaskets

Gasketsi


5

250

filters and strainers

Hayward Simplex Basket StrainerDescription: In-line strainer with serviceable basket filterMounting: VerticalMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneStrainer Basket: Glass Filled Polypropylene or 316 Stainless SteelStrainer Mesh Sizes: GFPP: 1/32″, 1/16″, 1/8″, 3/16″Stainless Steel: 20, 40, 60, 80, 100, 150, 200, 325 meshSeals: FPMEnd Connections: NPT Threaded or FlangedGauge: Optional

GFPP BodyGFPP Basket 1″ SB4100T

11/2″ SB4150T 2″ SB4200T

21/2″ SB4250T

NPT Female Threaded

GFPP BodyGFPP Basket 1″ SB401 00F

11/2″ SB401 50F 2″ SB402 00F

Flanged ANSI 150

1″ SB401001/_ 11/2, 2″ SB402001/_

Spare GFPP Basket

1″ BS710(XX) 11/2, 2″ BS720(XX)

Spare Stainless Steel Basket

on

application

on

application

on

application

on

application

Size Code Price

Size Code Price

Size Code Price

Size Code Price

To specify the mesh size, add to part number e.g. 3″ basket c/w 1/32″ mesh = SB103001/32

To specify the mesh size, add to part number e.g. 2″ basket c/w 60 mesh = BS72060

Hayward Simplex Platinum Basket StrainerDescription: In-line strainer with serviceable basket filterMounting: VerticalMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneStrainer Basket: Glass Filled Polypropylene or 316 Stainless SteelStrainer Mesh Sizes: GFPP: 1/32″, 1/16″, 1/8″, 3/16″Stainless Steel: 20, 40, 60, 80, 100, 150, 200, 325 meshSeals: FPMEnd Connections: NPT Threaded or FlangedGauge: Optional

GFPP BodyGFPP Basket 1/2″ SB4P050T

3/4″ SB4P075T1″ SB4P100T

11/4″ SB4P125T 11/2″ SB4P150T

2″ SB4P200T 21/2″ SB4P250T

3″ SB4P300T4″ SB4P400T

NPT Female Threaded

on

application

Size Code Price GFPP BodyGFPP Basket 1″ SB4P100F

11/4″ SB4P125F 11/2″ SB4P150F

2″ SB4P200F 21/2″ SB4P250F

3″ SB4P300F4″ SB4P400F

Flanged ASA 150

on

application

Size Code Price

GFPP BodyGFPP Basket 1/2″ SB4P050S

3/4″ SB4P075S1″ SB4P100S

11/4″ SB4P125S 11/2″ SB4P150S

2″ SB4P200S 21/2″ SB4P250S

3″ SB4P300S 4″ SB4P400S

Socket Fusion

on

application

Size Code Price

NEW!

Ideal for controlled draining on basket strainers. Includes ball vale with locking lever, drilled ball and nipple piece. Please enquire for details.

Drain Kits

i


5

251

filters and strainers

Length Connection Simplex DuplexCode Price Code Price

Single 2″ FPT FLV4P1520T4VS -Single 2″ ASA 150 FLV4P1520F4VS -Double 2″ FPT FLV4P2520T4VS -Double 2″ ASA 150 FLV4P2520F4VS FLT2DUP

Length Gauge Code PriceSingle* 1 micron F31R36590 Single* 5 micron F31R36817 Single* 10 micron F31R36552 Single* 25 micron F31R36596 Single* 50 micron F31R36589 Single* 100 micron F31R36551

Single* 200 micron F3AB00319 Double** 1 micron F31R36502 Double** 5 micron F31R36501 Double** 10 micron F31R36503 Double** 25 micron F31R36412 Double** 50 micron F31R36500 Double** 100 micron F31R36505 Double** 200 micron F3AB00222

Description: In-line strainer with replaceable bag filterMounting: In a horizontal positionMaximum Fluid Pressure at 20˚C: 15.5 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Glass filled PolypropyleneStrainer Basket: ClothStrainer Mesh Sizes: 5, 10, 25, 50, 100 micronSeals: FPMEnd Connections: 2″ NPT Female Threaded, flanged ASA 150Gauge: Optional

Hayward Bag Filter

Polypropylene Filter Bags - Welded Construction

Single or Double Bag Filter

Length Gauge Code PriceSingle* 1 micron F3AB00013 Single* 5 micron F3AB00157 Single* 10 micron F3AB00019 Single* 25 micron F3AB00020 Single* 50 micron F3AB00014 Single* 100 micron F31A37288

Single* 200 micron F3AB00103 Double** 1 micron F31B36372 Double* 5 micron F31B37455 Double* 10 micron F3AA01434 Double* 25 micron F3AB00002 Double* 50 micron F3AA00160 Double* 100 micron F3AA01128 Double** 200 micron F3AB00057

Polypropylene Filter Bags - Sewn Construction

Length Gauge Code PriceSingle* 150 micron F3AB00170

Single* 400 micron F3AB00173 Single* 600 micron F3AB00174 Single* 800 micron F3AB00175

Double* 150 micron F3AB00177 Double* 400 micron F3AB00180 Double* 600 micron F3AB00181 Double* 800 micron F3AB00182

Polypropylene Monofilament Filter Bags -Sewn Construction

Note: Filter bags are sold in box quantities only*Box quantity 50** Box quantity 30

on

applicationon

application

on

application

on

application

on

application


5

252

manual valves

EPDM SealsPTFE Seats 16 12 1377 73.79

20 12 1412 76.5625 12 1380 92.7632 12 1382 105.7540 12 1384 133.5750 12 1386 165.9363 12 1388 211.1175 12 1390 477.5090 12 1392 728.06

110 12 2115 850.37

16 12 1431 73.7920 12 1433 76.5625 12 1435 92.7632 12 1437 105.7540 12 1439 133.5750 12 1441 165.9363 12 1443 211.1175 12 1445 477.5090 12 1447 728.06

110 12 2509 850.37

FPM SealsPTFE Seats

16 12 1430 63.3620 12 1432 65.8925 12 1434 79.1532 12 1436 89.7940 12 1438 114.8450 12 1440 144.8063 12 1442 186.2775 12 1444 429.1890 12 1446 656.06

110 12 2508 758.64

EPDM SealsPTFE Seats

FPM SealsPTFE Seats

Praher Type S4 Ball Valve

16 12 1378 63.3620 12 1379 65.8925 12 1381 79.1532 12 1383 89.7940 12 1385 114.8450 12 1387 144.8063 12 1389 186.2775 12 1391 429.1890 12 1393 656.06

110 12 2094 758.64

Description: In-line double union ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene (PP-H)Seals: EPDM or FPMSeats: PTFEEnd Connections: Fusion sockets, fusion spigots,BSP Female Threaded, Flanged BS4504 EN1092 PN10Option: Silicon-free

MM Fusion Sockets

MM Fusion Spigots MM Fusion Spigots

MM Fusion Sockets

Tagging PointLockable Handle Valve Bracket Actuation

Praher S4 Ball Valve

Materials

Body - PolypropyleneBall Seat - PTFESeals - EPDM or FPM

Sizes

3/8″ - 4″/16mm - 110mm

Pressure Rating

3/8″/16mm to 2.1/2″/75mm - 10 bar3″ - 4″/90mm - 110mm - 6 bar

Connections

Fusion SocketsFusion SpigotsBSP Female ThreadedFlanged PN10

Features

• Lockable Handle (Lock not supplied)• True Union design for easy maintenance• Full bore design• Tagging point included• Matched Valve bracket for panel mounting and retrofit actuation.• Pneumatically and Electrically actuated versions available• Silicone free on request

Size Code Price


Size Code Price


5

253

manual valves

Praher M1 Modular Ball Valve

Limit Switch BoxLockable Handle

Intergrated Bracket

Simple Actuation

Materials

Body - PPBall Seat - PTFESeals - EPDM or FPM

Sizes

16mm - 63mm

Pressure Rating

16 bar

Connections

Fusion SocketsFusion Spigots

Features

• Lockable Handle (Lock not supplied)• True Union design for easy maintenance• Buttress thread on union• Full bore design• Integrated fixing points• Limit switch box for position feedback available• Modular adaptor set available for actuators or limit switches

16 12.4084 63.3620 12.4085 65.89

25 12.4086 79.15 32 12.4087 89.79 40 12.4088 114.84 50 12.4089 144.80 63 12.4090 186.27

16 12.4140 73.7920 12.4141 76.56

25 12.4142 92.76 32 12.4143 105.75 40 12.4144 133.57 50 12.4145 165.93 63 12.4146 211.11

MM Fusion SocketsEPDM Seals - PTFE Seats

MM Fusion SocketsFPM Seals - PTFE Seats


16 12.4098 63.3620 12.4099 65.89

25 12.4100 79.15 32 12.4101 89.79 40 12.4102 114.84 50 12.4103 144.80 63 12.4104 186.27

16 12.4147 73.7920 12.4148 76.56

25 12.4149 92.76 32 12.4150 105.75 40 12.4151 133.57 50 12.4152 165.93 63 12.4153 211.11

MM Fusion SpigotsEPDM Seals - PTFE Seats

MM Fusion SpigotsFPM Seals - PTFE Seats


M1 Ball Valve Manual M1 Ball Valve Manual

M1 Ball Valve Manual M1 Ball Valve Manual

NEW!


5

254

manual valves

Materials

Body - GRP, PVDF, ASPPSeals - EPDM, FPM, FFKM, NBR

Sizes1/2″/20mm - 6″/160mm

Pressure Rating

PN10 / PN16

Connections

Between flanges, universaly drilled

Options

Lockable handleHandle extensionsActuation: Electric / PneumaticSpecial regulations (V Ball)

Features

• Unique designed plastic valve• Reinforced flanges with encapsulated metal inserts• A locking key ensures correct flange alignment• The handle may be removed for safety purposes and can be relocated in one

position only• Built in 1/4 turn handle stops

Standard:Conforms to the pressure equipment directive 97/23/CE for gas and liquidsgroup 1 and 2

Face to Face: DIN:EN558, ISO 5752 PN10

PTFE thrust bearing washer reduces torque and provides a smoother operation and increases service life.

Fully encapsulated steel reinforced flanges removes the need for an exposed metal backing ring.

Compression moulded seat with spherical sealing surfaces and perfect contact with the ball. Good resistance to crystallization.

O-rings give energised seat/floating ball,ensuring sealing at low pressures, low operationtorque. Piston mounted body o-rings. Sealingavoids tension stress from the piping.

2-piece body with buttress thread. This thread isextremely robust and suited to plastics.

Body locking device:Prevents the loosening of valve body under the effects of pipe stresses.

Moulded sealing rings on flanges to improve gasket sealing and eliminate gasket extrusion.

Safi Manual 2-Way Ball Valve


5

255

manual valves

We have access to a huge range of products that are not featured in our Handbook.

If you don’t see what you want, give our team a call.

Don’t see what you want?

Description: In-line flanged compact ball valveMounting: In any position, between flanges to PN10/16Sizes: 1/2″ to 6″Construction:Body: GRPP, PVDF, ASPP (Anti-Static Polypropylene)Seals: EPDM, FPM, FFKM, NBRShaft: GRRPEnd Connections: Between flanges, universaly drilled

Safi GRPP 2-Way Ball Valve

1/2/20 2014-00FFE 81.213/4/25 2014-01FFE 85.241/32 2014-02FFE 122.62

11/4/40 2014-03FFE 140.43 11/2/50 2014-04FFE 190.72 2/63 2014-05FFE 216.45 3/90 1003-27FFE 520.35 4/110 1003-28FFE 613.73 6/160 2008-09FFE 1230.63

EPDM Seals

Lever Operated

1/2/20 2014-00FFV 121.663/4/25 2014-01FFV 127.891/32 2014-02FFV 145.76

11/4/40 2014-03FFV 165.20 11/2/50 2014-04FFV 218.35 2/63 2014-05FFV 247.28 3/90 1003-27FFV 619.28 4/110 1003-28FFV 705.55 6/160 2008-09FFV 1394.45

FPM Seals

Gear Operated


GRRP version shown


5

256

manual valves

Praher T4 Diaphragm Valve

Visual Position Indicator

Lockable Handle Optional Valve Support Plates

Valve Dimensions

General

Sealing material: EPDM / EPDM-PTFE /FPM

Body material: Polypropylene (PP-H)Dimensions: DN 15/d 20 - DN125/d140

Operating Pressure

DN 15 / 1/2″ - DN 125 / 5″ 10 bar

Connections

PP union sockets 20mm-63mmPP fusion spigots 20mm-110mmFlanged PN10 20mm-140mm

Technical Specification

For example:TYPE PRAHER, DIN 2403PP Diaphragm valve T4 DN 15 d20PP mm fusion spigotSealing material EPDM-PTFESafety gear wheelMax. Operating pressure 10 bar

Dimensions in mm

Features

• Safety gear wheel• Corrosion Resistant• Maintenance free operation over a long working life• Suitable for aggressive and dirty media• Radial installation or removal• Easy replacement of the diaphragms

d 20 25 32 40 50 63 75 90 110 140DN 15 20 25 32 40 50 65 80 100 125G 1/2″ 3/4″ 1″ 11/4″ 11/2″ 2″ 21/2″ 3″ 4″ 5″M 16.5 16.5 20.1 31.5 31.5 38.6 25.0 25.0 25.0 25.0H 100.0 100.0 107.0 144.0 144.0 170.0 260.0 260.0 330.0 330.0B 86.0 86.0 86.0 136.0 136.0 136.0 234.0 234.0 234.0 234.0F 24.5 24.5 24.5 43.5 43.5 43.5 - - - -Lift 9.0 9.0 11.0 22.0 22.0 28.0 35.0 35.0 45.0 45.0K M6 M6 M6 M8 M8 M8 - - - -L 124.0 144.0 154.0 174.0 194.0 224.0 284.0 300.0 340.0 -L1 130.0 150.0 160.0 180.0 200.0 230.0 - 310.0 350.0 400.0T 12.0 12.0 12.0 15.0 15.0 15.0 - - - -t 28.5 36.0 36.0 38.5 46.0 46.0 37.0 37.0 50.0 -PN 10 10 10 10 10 10 10 10 10 10

DN 15 - DN 50 DN 65 - DN 80


5

257

manual valves

EPDM Diaphragm

20 12 0229 128.2625 12 0230 138.5232 12 0231 164.1740 12 0232 209.1550 12 0233 250.5963 12 0235 318.6575 12 0237 621.5290 12 0238 692.53

110 12 0909 1231.19140 12 0910 2300.56

20 12 0250 207.1725 12 0251 218.0332 12 0252 247.6340 12 0253 326.5450 12 0255 367.0063 12 0257 494.2175 12 0258 739.8790 12 0260 1020.04

110 12 0912 1489.66140 12 0913 2632.01

EPDM Diaphragm

20 12 0173 175.4025 12 0175 186.6732 12 0177 217.0540 12 0178 274.2650 12 0179 329.5163 12 0180 418.2975 12 0181 708.3390 12 0182 827.69

110 12 0905 1272.60

PTFE Diaphragm

PTFE Diaphragm

20 12 5038 106.7625 12 5039 111.8732 12 5040 136.5340 12 5041 163.7850 12 5042 213.0863 12 5043 259.47

EPDM Diaphragm

Praher Type T4 Diaphragm Valve

20 12 0150 86.2325 12 0154 96.4732 12 0155 123.1340 12 0156 143.6250 12 0157 188.6263 12 0158 235.7875 12 0159 552.4690 12 0160 599.82

110 12 0902 1014.15

Description: In-line diaphragm valve with position indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene (PP-H)Diaphragm: EPDM, FPM or PTFE (EPDM backed)End Connections: Fusion spigots, flanged BS4504 EN1092Option: Silicon-free


MM Union Sockets

20 12 5050 193.3825 12 5051 202.2332 12 5052 294.9940 12 5053 331.4550 12 5054 429.1863 12 5055 457.75

PTFE Diaphragm

MM Union Sockets

Flanged PN10 Flanged PN10

20 12 0161 175.4025 12 0163 186.6732 12 0164 217.0540 12 0165 274.2650 12 0166 329.5163 12 0170 418.2975 12 0171 874.74 90 12 0172 920.76

20 12 0239 207.1725 12 0240 218.0332 12 0241 247.6340 12 0242 326.5450 12 0243 367.0063 12 0246 494.2175 12 0248 846.26 90 12 0249 1016.95

FPM Diaphragm FPM Diaphragm

MM Fusion Spigots Flanged PN10

Description: Globe or Angle pattern flow control valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeal: PTFEEnd Connections: Female NPT ThreadedFeature: Built-in panel or bracket mounting nut

Spears Needle Valve

1/4 5591- 002P 87.223/8 5591- 003P 87.22

Globe Pattern Valve

1/4 5691- 002P 87.223/8 5691- 003P 87.22

Angle Pattern Valve

Size Code Price

Size Code Price


Size Code Price

Size Code Price

Size Code Price


Size Code Price


5

258

manual valves

EPDM SealsPTFE Seats 16 124898 189.81

20 124902 190.60 25 125022 193.98 32 124906 195.91 40 125024 236.95 50 124910 308.79 63 124914 387.70

16 124899 189.81 20 124903 190.60 25 125023 193.98 32 124907 195.91 40 125025 296.95 50 124911 308.79 63 124915 387.70

FPM SealsPTFE Seats

16 124768 162.41 20 124772 163.38 25 125015 164.57 32 124776 165.73 40 125017 245.65 50 124891 248.60 63 124895 301.88

EPDM SealsPTFE Seats

FPM SealsPTFE Seats

Praher Type S4 T & L-Port Ball Valve

16 124767 162.41 20 124771 162.41 25 125014 164.57 32 124775 165.73 40 125016 245.65 50 124890 248.60 63 124894 301.88

Description: In-line horizontal T-port or L-port ball valve with lockable handle and union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene (PP-H)Seals: EPDM or FPMSeats: PTFEEnd Connections: Fusion sockets or fusion spigots

T-Port Ball Valve

L-Port Ball Valve

MM Fusion Sockets

MM Fusion Sockets MM Fusion Sockets

MM Fusion Sockets

EPDM SealsPTFE Seats 20 145 650 141.04

25 145 651 165.9532 145 652 198.68

FPM SealsPTFE Seats

ASV Stubbe C200 Dos Dosing Ball Valve

20 145 645 125.0925 145 646 148.3132 145 647 177.25

Description: In-line double union ball valve with flow indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion sockets Features: Accurate flow control with 180° visible indicator


Also available with fusion spigot connections. Prices are the same as above.

Valve bracket shown in PVC-U

Praher Valve Bracket for Type S4 T & L-Port Valve

16 17.0511 39.86 20 17.0511 39.86 25 17.0512 44.98 32 17.0512 44.98 40 17.0513 50.90 50 17.0513 50.90 63 17.0514 50.90

Size Code Price

Size Code Price


Size Code Price



5

Praher Type S4 Ball Valve with Actuator Adaptor Kit

Praher Valve Bracket for Type S4 Ball Valve

16 122 511 148.3820 122 512 151.1025 122 513 166.0432 122 514 178.6640 122 515 241.5750 122 516 273.2163 122 517 315.3875 122 518 581.8890 122 519 805.21

110 122 520 923.13

EPDM Seals

Size Code Price 16 126.518 171.77 20 on application 25 on application 32 120.416 202.07 40 on application 50 122.700 302.93 63 120.417 349.93 75 on application 90 120.418 895.34 110 on application

FPM Seals

Size Code Price

Includes:Polypropylene Ball Valve, Polypropylene Valve Bracket, Console, Actuator Adaptor, Screw Set

16 17.0279 39.07 20 17.0279 39.07 25 17.0280 41.84 32 17.0281 44.40 40 17.0228 47.36 50 17.0230 49.71 63 17.0232 52.68 75 17.0275 73.61 90 17.0282 82.28 110 17.0282 82.28

Size Code Price

Valve shown with bracket

Prices on request for BSP threaded sockets or PN10 flanged connections

259

manual valve accessories

Diaphragm Valve Mounting PlateEnsures clearance of union nut from mounting surfaceComplete with two fixing screws.

20 16.0 14 0103 7.3025 23.0 14 0102 7.3032 23.0 14 0102 7.3040 18.5 14 0123 11.8750 23.5 14 0109 11.8763 23.5 14 0109 11.87

Valve PlateSize Thickness Code Price

(mm)

Mounting plate shown fitted to valve

20/1/2 05.0457 28.82 25/3/4 05.0457 28.8232/1 05.0458 30.5840/11/4 05.0459 36.3050/11/2 05.0459 36.3063/2 05.0460 36.3075/21/2 12.0933 75.3890/3 12.0933 75.38110/4 12.0934 170.885 12.0934 170.88

EPDM Diaphragm

20/1/2 05.0465 135.17 25/3/4 05.0465 135.1732/1 05.0466 140.5040/11/4 05.0467 155.4850/11/2 05.0467 155.4863/2 05.0468 329.5175/21/2 12.0935 378.7090/3 12.0935 378.70 110/4 12.0936 634.205 12.0936 634.20

FPM Diaphragm

20/1/2 05.0473 58.37 25/3/4 05.0473 58.3732/1 05.0474 65.5040/11/4 05.0475 81.2850/11/2 05.0475 81.2863/2 05.0476 91.9675/21/2 12.0918 447.8990/3 12.0918 447.89 110/4 12.0919 512.995 12.0919 512.99

EPDM/PTFE Diaphragm

Replacement T4 Diaphragm

Size Code Price Size Code Price Size Code Price


5

260

manual valves

Universal DrillingLocking Handle

PP-GF BodyPP disc

Support Lugs in Base

Size 21/2″/75 3″/90 4″/110 6″/160 8″/225A 230 230 300 386 386D 65 80 100 150 200C 133 176 206 261 314W 90º 45º 45º 45º 45ºJ 19 19 19 23 23K 127-145 146-160 175-190.5 234.5-241.3 290-298.5H 285 292 322 396 458h 100 100 115 147.5 175E 98 116 146 196 251M 114 114 114 150 150Z 46 49 56 70 71PN 10 bar 10 bar 10 bar 10 bar 10 bar

Valve Dimensions

Praher K4 Butterfly Valve

MaterialsBody - PP-GFDisc - PolypropyleneSeals - EPDM or FPM

Sizes 21/2″/75mm - 8″/225mm

Pressure RatingPN10

ConnectionsBetween flanges, universaly drilled

Dimensions in mm

Features

• Only Body Seal and Disc in contact with media• Double sealed shaft• Valve support lugs in base• Direct actuator mounting• Low torque operation• Multi-position Lockable Handle• Manual or Gear operation• All sizes PN10 rated• Universal drilling - can be used withDIN, ANSI, BS and JIS flanges• Available as lugged version

Lugged Type


5

261

manual valves

EPDM Seals 21/2″/75 12.5870 274.20

3″/90 12.5871 321.774″/110 12.5872 344.005″/140 12.8458 690.996″/160 12.5873 573.438″/225 12.5874 803.80

EPDM Seals 21/2″/75 12.6020 553.64

3″/90 12.6021 601.224″/110 12.6022 617.465″/140 12.8762 711.816″/160 12.6023 846.128″/225 12.6024 1076.63

Description: Lug style butterfly valve with universal drilling for mounting between flanges. (DIN, ANSI & BS)Construction:Body: PP-GFDisc: PolypropyleneSeals: EPDM or FPMPressure rating: PN10Size: 21/2″/75mm - 8″/225mmOptions: - Lug type, gear operated

- Position feedback

Praher Type K4 Butterfly Valve

Lever Operated

Gear Operated

FPM Seals 21/2″/75 12.5875 381.52

3″/90 12.5876 459.504″/110 12.5877 440.845″/140 12.8459 655.176″/160 12.5878 741.218″/225 12.5879 1004.28

FPM Seals 21/2″/75 12.6025 653.81

3″/90 12.6026 738.964″/110 12.6027 772.925″/140 12.8764 864.966″/160 12.6028 1013.898″/225 12.6029 1279.32

Lever Operated

Gear Operated

Size Code Price


Size Code Price

EPDM Seals 21/2″/75 12.5870 LD 427.03

3″/90 12.5871 LD 577.934″/110 12.5872 LD 608.915″/140 12.8458 LD 907.596″/160 12.5873 LD 1143.038″/225 12.5874 LD 1380.48

Lugged DIN

EPDM Seals 21/2″/75 12.5870 LA 427.03

3″/90 12.5871 LA 577.934″/110 12.5872 LA 608.915″/140 12.8458 LA 907.596″/160 12.5873 LA 1143.038″/225 12.5874 LA 1380.48

Lugged ANSI


* Installation in PE100 SDR17 - stub flanges need to be chamfered, please see page 297.

FPM seals available on requestFPM seals available on request


5

262

manual valves

Description: Wafer style butterfly valveMounting: In any position, between flanges to ANSI 150Maximum Fluid Pressure at 20˚C: Sizes 11/2″ to 10″ : 10 bar Sizes 12″ to 14″ : 6.9 bar; 16″ : 5.8 bar; 18″ : 5.1 bar; 20″ to 24″ : 3.4 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PolypropyleneDisc: Polypropylene or PVDFSeals: EPDM, FPM or NitrileShaft: Stainless Steel 316End Connections: Flange mounted (flanges not included)

Asahi Type 57 Butterfly Valve

Lever OperatedEPDM Seals 11/2 3752-015 961.85

2 3752-020 1008.29 21/2 3752-025 1279.26 3 3752-030 1430.19 4 3752-040 1530.83 6 3752-060 2426.89 8 3752-080 3617.09

Polypropylene Disc

Lever OperatedFPM Seals 11/2 3753-015 1093.47

2 3753-020 1136.03 21/2 3753-025 1530.83 3 3753-030 1585.02 4 3753-040 1687.60 6 3753-060 3557.10 8 3753-080 4110.61

Lever OperatedEPDM Seals

11/2 3740-015 1093.47 2 3740-020 1139.91 21/2 3740-025 1437.94 3 3740-030 1621.79 4 3740-040 1745.66 6 3740-060 2937.80 8 3740-080 4439.62

Lever OperatedFPM Seals 11/2 3741-015 1225.04

2 3741-020 1269.58 21/2 3741-025 1689.52 3 3741-030 1776.63 4 3741-040 1904.34 6 3741-060 4068.04 8 3741-080 4931.18

PVDF Disc

EPDM Seals3″/90 12 1931 556.40

4″/110 12 1932 559.00 5″/140 12 2310 826.72 6″/160 12 1933 929.31 8″/225 12 1934 1189.73

3″/90 12 2550 1254.84 4″/110 12 2551 1314.03 5″/140 12 2552 1456.10 6″/160 12 2553 1493.57 8″/225 12 2554 1688.89

FPM Seals

3″/90 12 2545 1179.87 4″/110 12 2546 1233.13 5″/140 12 2547 1343.61 6″/160 12 2548 1396.90 8″/225 12 2549 1562.63

EPDM Seals FPM Seals

3″/90 12 1927 481.43 4″/110 12 1928 578.09 5″/140 12 2544 714.24 6″/160 12 1929 831.60 8″/225 12 1930 1062.46

Praher Type S4 Butterfly ValveDescription: Wafer style butterfly valveMounting: In any position, between flanges to BS 4504 EN1072 PN10Maximum Fluid Pressure at 20˚C: Sizes 90mm to 140mm - 10 bar;Sizes 160mm to 225mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body and Disc: PolypropyleneSeals: EPDM or FPMShaft: Stainless steel 304End Connections: Flange mounted (flanges not included)

Lever operated Lever operated

Gear operated Gear operated

Size Code Price

Size Code Price

Size Code Price


Size Code Price

Size Code Price

Size Code Price


5

263

manual valves

Plasgear OperatedEPDM Seals 11/2 3726-015 1466.99

2 3726-020 1513.42 21/2 3726-025 1786.28 3 3726-030 1935.32 4 3726-040 2037.88 6 3726-060 2930.07 8 3726-080 4058.36

10 3726-100 4642.7912 3726-120 6471.69

14 3726-140 16 3726-160

Polypropylene Disc

Metal Gear OperatedEPDM Seals 12 3801-120

14 3801-140 16 3801-160 18 3801-180 20 3801-200 24 3801-240

Plasgear OperatedFPM Seals 11/2 3727-015 1598.57

2 3727-020 1641.16 21/2 3727-025 2037.88 3 3727-030 2090.13 4 3727-040 2194.64 6 3727-060 4062.22 8 3727-080 4520.89

10 3727-100 6235.5712 3727-120 8710.83

14 3727-140 16 3727-160

Metal Gear OperatedFPM Seals 12 3803-120

14 3803-140 16 3803-160 18 3803-180 20 3803-200 24 3803-240

Plasgear OperatedNitrile Seals 11/2 3735-015 1466.99

2 3735-020 1513.42 21/2 3735-025 1786.28 3 3735-030 1935.32 4 3735-040 2037.88 6 3735-060 2930.07 8 3735-080 4058.36

10 3735-100 4642.7912 3735-120 6471.69

14 3735-140 16 3735-160

Metal Gear OperatedNitrile Seals 12 3802-120

14 3802-140 16 3802-160 18 3802-180 20 3802-200 24 3802-240

Plasgear OperatedEPDM Seals 11/2 3736-015 1598.57

2 3736-020 1646.94 21/2 3736-025 1944.98 3 3736-030 2128.84 4 3736-040 2252.70 6 3736-060 3442.92 8 3736-080 4880.87

10 3736-100 6092.3512 3736-120 8468.94

14 3736-140 16 3736-160

PVDF Disc

Metal Gear OperatedEPDM Seals

12 3804-120 14 3804-140 16 3804-160 18 3804-180 20 3804-200 24 3804-240

Plasgear OperatedFPM Seals 11/2 3737-015 1732.12

2 3737-020 1772.75 21/2 3737-025 2196.57 3 3737-030 2281.74 4 3737-040 2409.46 6 3737-060 4575.09 8 3737-080 5343.40

10 3737-100 7685.1212 3737-120 10706.15

14 3737-140 16 3737-160

Metal Gear OperatedFPM Seals

12 3805-120 14 3805-140 16 3805-160 18 3805-180 20 3805-200 24 3805-240

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication on

application

Size Code Price

Size Code Price


Size Code Price

Size Code Price

Size Code Price


Size Code Price


5

264

manual valves

Universal DrillingVisual Position Indicator

Valve Dimensions

Praher K4 Check Valve

85º Max Opening

Materials

Body - PP-GFDisc - PP-GFSeals - EPDM or FPM

Sizes

21/2″/75mm - 10″/250mm

Pressure Rating

PN10

Connections

Between flanges, universaly drilled

Dimensions in mm

Features

• Excellent Flow Rates• Wide opening (85%)• Low pressure drop• Visual open-closed indicator• Spring return• All sizes PN10 rated• Universal drilling - can be used withDIN, ANSI, BS and JIS flanges

DN A B C K W65 115 63 20 139-145 90º80 128 71 20 150-160 45º100 155 80 20 175-191 45º150 212 106 24 234-242 45º200 264 140 24 290-299 45º250 325 140 27 350-362 30º

DN 65 80 100 150 200 250 300

Nm 15 18 20 40 55 60 65

Tightening torque for flange connections


5

265

manual valves

EPDM Seals 21/2″/75 12.5832 408.66

3″/90 12.5833A 450.784″/110 12.5834A 541.156″/160 12.5835A 743.188″/225 12.5836 1326.18

10″/250 12.5837 2224.81

FPM Seals 21/2″/75 12.5839 462.00

3″/90 12.5840A 524.634″/110 12.5841A 624.766″/160 12.5842A 843.198″/225 12.5843 1442.80

10″/250 12.5844 2359.25

Description: Lug style check valve with universal drilling for mounting between flanges. (DIN, ANSI & BS)Construction:Body: PolypropyleneSeals: EPDM or FPMPressure rating: PN10Size: 21/2″/75mm - 10″/250mm

Praher Type K4 Check Valve

Pressure loss based on maximum opening of 85%

Kv Value Table

Pressure Lost 1 bar 0.001 bar

DN 80 2958 l/min 94 l/min

DN 100 5633 l/min 178 l/min

DN 150 12466 l/min 394 l/min

DN 200 21166 l/min 699 l/min



5

266

manual valves

EPDM Seals16 12 1551 56.2520 12 1553 58.6025 12 1555 67.4932 12 1557 78.5440 12 1559 89.3950 12 1561 118.6063 12 1563 169.2875 12 1565 410.3990 12 1567 547.53

110 12 2542 652.09

16 12 1569 56.2520 12 1571 58.6025 12 1573 67.4932 12 1575 78.5440 12 1577 89.3950 12 1579 118.6063 12 1581 169.2875 12 1583 410.3990 12 1585 547.53

110 12 2543 652.09

FPM Seals

16 12 1568 47.1720 12 1570 49.5425 12 1572 56.2532 12 1574 65.3140 12 1576 73.7950 12 1578 100.6463 12 1580 149.1575 12 1582 369.6590 12 1584 486.34

110 12 2540 590.93


Praher Type S4 Air Release Valve

16 12 1550 47.1720 12 1552 49.5425 12 1554 56.2532 12 1556 65.3140 12 1558 73.7950 12 1560 100.6463 12 1562 149.1575 12 1564 369.9590 12 1566 486.34

110 12 2539 590.93

Description: In-line air release valveMounting: In a vertical positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene Seals: EPDM or FPM Cone: PolypropyleneEnd Connections: Fusion sockets, fusion spigots or female BSP threaded

EPDM Seals16 12 1605 62.9520 12 1607 65.5025 12 1609 74.4032 12 1611 84.6440 12 1613 104.1650 12 1615 133.3963 12 1617 178.9675 12 1619 425.1990 12 1621 557.39

110 12 2537 661.95

16 12 1623 62.9520 12 1625 65.0525 12 1627 74.4032 12 1629 84.6440 12 1631 104.1650 12 1633 133.3963 12 1635 178.9675 12 1637 425.1990 12 1639 557.39

110 12 2538 661.95

FPM Seals

16 12 1622 54.0620 12 1624 56.2525 12 1626 62.9532 12 1628 71.0540 12 1630 88.6250 12 1632 115.4463 12 1634 159.0175 12 1636 385.7590 12 1638 497.21

110 12 2536 601.77


Praher Type S4 Foot Valve

16 12 1604 54.0620 12 1606 56.2525 12 1608 62.9532 12 1610 71.0540 12 1612 88.6250 12 1614 115.4463 12 1616 159.0175 12 1618 385.7590 12 1620 497.21

110 12 2535 601.77

Description: In-line foot valve with screenMounting: In a vertical positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene Seals: EPDM or FPM Cone: Polypropylene (weighted)End Connections: Fusion sockets, fusion spigots or female BSP threaded

MM Fusion Sockets

MM Fusion Spigots



MM Fusion Spigots

MM Fusion Sockets

Size Code Price

Size Code Price

Size Code Price


Size Code Price

Size Code Price

Size Code Price


5

267

manual valves

EPDM Seals16 12 1838 65.0020 12 1839 67.4925 12 1840 78.5432 12 1841 92.1540 12 1842 111.1150 12 1843 136.9463 12 1844 181.7275 12 1845 428.1590 12 1846 563.30

110 12 2533 667.86

16 12 1514 65.5020 12 1516 67.4925 12 1518 78.5432 12 1521 92.1540 12 1523 111.1150 12 1525 136.9463 12 1527 181.7275 12 1529 428.1590 12 1531 563.30

110 12 2534 667.86

3/8 12 1533 74.771/2 12 1535 76.953/4 12 1537 90.951 12 1539 105.75

11/4 12 1541 127.07 11/2 12 1543 158.45

2 12 1545 212.13 21/2 12 1547 477.50 3 12 1549 643.21

FPM Seals

3/8 12 1532 65.891/2 12 1534 67.883/4 12 1536 79.521 12 1538 92.15

11/4 12 1540 111.51 11/2 12 1542 140.50

2 12 1544 191.38 21/2 12 1546 437.03 3 12 1548 583.03


16 12 1513 56.2520 12 1515 58.6025 12 1517 67.4932 12 1519 78.5440 12 1522 95.3350 12 1524 119.0063 12 1526 161.6175 12 1528 388.6790 12 1530 502.13

110 12 2532 589.94


Praher Type S4 Check (Non Return) Valve

16 12 1502 56.2520 12 1503 58.6025 12 1504 67.4932 12 1505 78.5440 12 1506 95.3350 12 1507 119.0063 12 1508 161.6175 12 1509 388.6790 12 1510 502.13

110 12 2531 589.94

Description: In-line spring weighted cone check valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene Seals: EPDM or FPMSpring: Stainless Steel sleeved in PTFEEnd Connections: Fusion sockets, fusion spigots or female BSP threaded

MM Fusion Sockets

BSP Female Threaded BSP Female Threaded


MM Fusion Sockets

Description: Liquid level control valveMounting: In a horizontal positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PolypropyleneArm: PolypropyleneFloat: PolypropyleneEnd Connections: BSP male threaded

Ball Float Valve

1/2 HA/BVADJ/1PE/EP 50.62 1 HA/BVADJ/5PE/EP 178.63 11/2 HA/BVADJ/7PE/EP 215.84

Adjustable Cam Adjustable Cam Design5 Different Positions

Size Code Price

Size Code Price


Size Code Price

Size Code Price

Size Code Price


5

268

manual valves

EPDM Seals 11/4″/40 07 0191 148.20 11/2″/50 07 0201 153.33

2″/63 07 0042 182.12 21/2″/75 07 0052 184.51

3″/90 07 0062 212.134″/110 07 0072 266.375″/140 07 0082 314.716″/160 07 0092 396.578″/225 07 0102 729.04

10″/280 07 0112 1016.11 12″/315 07 0122 1298.24 14″/355 07 0623 3028.58 16″/450 07 0624 3614.56 20″/560 07 0625 6041.37

11/4″/40 07 0193 255.52 11/2″/50 07 0203 260.44

2″/63 07 0043 276.21 21/2″/75 07 0053 278.19

3″/90 07 0063 332.464″/110 07 0073 391.665″/140 07 0083 460.736″/160 07 0093 551.448″/225 07 0103 815.83

10″/280 07 0113 1205.52 12″/315 07 0123 1588.29

FPM Seals

11/4″/40 07 0192 213.08 11/2″/50 07 0205 219.03

2″/63 07 0041 256.49 21/2″/75 07 0051 266.37

3″/90 07 0061 284.104″/110 07 0071 329.515″/140 07 0081 375.866″/160 07 0091 414.358″/225 07 0101 811.90

10″/280 07 0111 1156.21 12″/315 07 0121 1499.49


Praher Type S4 Wafer Check Valve

11/4″/40 07 0190 114.45 11/2″/50 07 0200 119.79

2″/63 07 0040 160.22 21/2″/75 07 0050 165.93

3″/90 07 0060 177.394″/110 07 0070 206.215″/140 07 0080 234.786″/160 07 0090 294.008″/225 07 0100 653.09

10″/280 07 0110 942.14 12″/315 07 0120 1209.46 14″/355 07 0620 2627.43 16″/450 07 0621 2665.53 20″/560 07 0622 4360.40

Description: Wafer style flap check valveMounting: In any position, between flanges to BS 4504 EN1072, PN10.Optional spring return for mounting in horizontal position or for pulsating flow.Maximum Fluid Pressure at 20˚C: Sizes 40mm to 160mm - 10 bar; sizes 225mm to 500mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSpring: Stainless SteelEnd Connections: Flange mounted (flanges not included)

No Spring Return

Stainless Steel Spring Return Stainless Steel Spring Return

No Spring Return

11/4″/40 07 0467 28.99 11/2″/50 07 0468 37.67

2″/63 07 0469 50.51 21/2″/75 07 0470 60.39

3″/90 07 0471 102.224″/110 07 0472 152.705″/140 07 0473 230.836″/160 07 0474 414.358″/225 07 0475 1016.11

10″/280 07 0476 1341.65 12″/315 07 0477 1821.10

Installation Adaptor for Wafer Check ValveFlange mountingAllows the valve to open fullyWill accommodate use with heavy wall pipes

Occasionally the flange mounted wafer check valve will have restricted opening if it is mounted in a heavy wall pipe. For all installations in heavy wall pipes we recommend the use of the additional installation adaptor to ensure that the valve will open fully.

Flange Mounted WaferCheck Valves

Note: backing ring not included. i

Size Code Price


Size Code Price

Size Code Price


5

269

manual valves

Praher Type S4 Line StrainerDescription: In-line strainer with union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDMStrainer: Polypropylene with 1.8mm mesh; Stainless Steel with 0.5mm, 0.75mm or 1mm meshEnd Connections: Fusion sockets, fusion spigots

16 12 1711 56.0320 12 1712 56.0325 12 1713 67.4932 12 1714 78.5440 12 1715 95.3350 12 1716 119.0063 12 1717 161.6175 12 1718 426.1790 12 1719 528.77

110 12 1720 655.81

16 12 1725 56.0320 12 1726 56.0325 12 1727 67.4932 12 1728 78.5440 12 1729 95.3350 12 1730 119.0063 12 1731 161.6175 12 1732 426.1790 12 1733 528.77

110 12 1734 655.81

EPDM SealsPolypropylene Screen

EPDM SealsPolypropylene Screen

MM Fusion Sockets

16 12 5000 51.2920 12 5001 51.2925 12 5002 62.7532 12 5003 73.7940 12 5004 89.5750 12 5005 112.8463 12 5006 154.9175 12 5007 417.3190 12 5008 515.96

110 12 5009 638.88

EPDM Sealsno screen included

MM Fusion Sockets

16/3/8 50606 16.34 20/1/2 50606 16.34 25/3/4 50608 20.51 32/1 50608 20.51 40/11/4 50609 23.15 50/11/2 50610 28.25 63/2 50611 32.69 75/21/2 50612 49.52 90/3 50613 60.29 110/4 50613 60.29

0.5mm mesh

16/3/8 50614 16.34 20/1/2 50614 16.34 25/3/4 50616 20.51 32/1 50616 20.51 40/11/4 50617 21.24 50/11/2 50618 28.25 63/2 50619 32.69 75/21/2 50620 49.52 90/3 50621 60.29 110/4 50621 60.29

0.75mm mesh

16/3/8 50622 16.34 20/1/2 50622 16.34 25/3/4 50624 20.51 32/1 50624 20.51 40/11/4 50625 21.24 50/11/2 50626 28.25 63/2 50627 32.69 75/21/2 50628 49.52 90/3 50629 60.29 110/4 50629 60.29

1mm mesh

Stainless Steel Screens*

MM Fusion Spigots

* Note: A filtersupport is required

for the stainless steel screen

Filter Support for Stainless Steel Screen

16/3/8 14.1474 34.08 20/1/2 14.1474 34.0825/3/4 14.1475 35.72 32/1 14.1476 35.72 40/11/4 14.1477 43.69 50/11/2 14.1478 48.54 63/2 14.1479 52.15 75/21/2 14.1480 67.18 90/3 14.1481 60.29 110/4 14.1481 88.29

ASV Stubbe Gauge Guard MDM 902Description: Pressure gauge connector with isolating diaphragmMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneDiaphragm: PTFE (EPDM backed)End Connections: Fusion Spigots, NPT Female Threaded

25x1/4x1/4″ 212974 117.53 32x1/2x1/2″ 212987 117.53

Note: gauge not included.



Size Code Price

Size Code Price

Size Code Price

Size Code Price


5

270

actuated valves

Actuated Valves

Valve ActuationAlmost all the valves we supply can be automated.

From simple air actuation, to complex configurations, we can build a unit to your exact specifications.

Our in house experts can advise you on the options available and suggest the most suitable unit for your application. The valves are normally assembled by our dedicated valve actuation team, who can provide comprehensive after sales service.

Standard valves are shown on the following pages, but please contact Tony Welsh for any special requirements you may have.

Note: Valve for illustration purposes only


5

Body Material Options PriceTechnopolymer standardHard anodised aluminium free optionStainless steel on applicationDouble pack epoxy coated on applicationSwitchbox Options (with beacon)IP65 Technopolymer 2 x mechanical switches 115.88IP65 Technopolymer 2 x proximity switches EEXIA 453.55IP67 Polycarbonate 2 x V3 gold plated switches 156.79IP67 Polycarbonate 2 x V3 gold plated switches EEXIA 371.37IP67 Polycarbonate 2 x proximity switches EEXIA 340.70IP67 Aluminium 2 x V3 gold plated switches EEXD 409.02Solenoid Valve Options240v AC Solenoid 119.28110v AC Solenoid 119.2824v DC Solenoid 119.2824v AC Solenoid 119.28

Switch Options PriceOpen/Closed includedOpen/Closed plus 2 x extra volt free 123.92Actuator OptionsReversible actuator with manual override standardUni-directional actuator without manual override on applicationCustomer specification actuator on applicationEEXD version actuator on applicationPower Options110v AC standard240v AC free option24v DC on application24v AC on applicationExtra OptionsHeater and thermostat on application4 - 20Ma positioner on applicationFail-Safe operation on application

271

actuated valves

Praher Type S4 Electrically Actuated Ball Valve

110v acEPDM SealsPTFE Seats

16 12 1378 E2AG 743.9620 12 1379 E2AG 753.0825 12 1381 E2AG 768.4232 12 1383 E2AG 780.9740 12 1385 E2AG 807.7750 12 1387 E2AG 838.9163 12 1389 E2AG 880.7075 12 1391 E2AG 1403.5790 12 1393 E2AG 1628.62

110 12 2094 E2AG 1727.39

Description: In-line ball valve with electric actuatorMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 63mm - 10 bar;75mm - 6 bar; 90mm - 5 bar; 110mm - 4 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion Sockets, Fusion Spigots, BSP Threaded, Flanged BS4504 EN1072 PN10Actuation:Housing Material: Plastic with epoxy coated aluminium baseVoltages: 240v AC; 110v AC; 24v AC; 110v DC; 24v DC; 12v DCFrequency Range: 50/60 HzProtection: IP65Manual Override: OptionalPosition Indicator: IncludedContacts: Open, closed. Additional contacts optional.

MM Fusion Sockets

110v acFPM Seals

PTFE Seats16 12 1377 E2AG 760.4620 12 1412 E2AG 763.7125 12 1380 E2AG 781.3532 12 1382 E2AG 796.5440 12 1384 E2AG 825.6450 12 1386 E2AG 858.8463 12 1388 E2AG 904.4375 12 1390 E2AG 1450.0890 12 1392 E2AG 1697.74

110 12 2115 E2AG 1816.66

MM Fusion Sockets

Pneumatic Actuated Valve OptionsElectric Actuated Valve Options


Register online for our technical catalogueTechnical Resources

www.ipsflowsystems.comScan the QR code or call our technical team on:0800 975 79 71


5

272

actuated valves

Praher Type S4 Pneumatically Actuated Ball Valve

Fail-safe CloseEPDM SealsPTFE Seats

16 12 1377 P1A 406.07 20 12 1412 P1A 408.74 25 12 1380 P1A 426.23 32 12 1382 P1A 440.55 40 12 1384 P1A 509.79 50 12 1386 P1A 542.97 63 12 1388 P1A 672.95 75 12 1390 P1A 1006.90 90 12 1392 P1A 1347.96 110 12 2115 P1A 1589.56

Fail-safe CloseFPM Seals

PTFE Seats 16 12 1378 P1A 395.91 20 12 1379 P1A 398.39 25 12 1381 P1A 412.93 32 12 1383 P1A 425.06 40 12 1385 P1A 491.55 50 12 1387 P1A 522.45 63 12 1389 P1A 648.78 75 12 1391 P1A 959.94 90 12 1393 P1A 1278.01 110 12 2094 P1A 1500.41

Fail-safe CloseEPDM SealsPTFE Seats


Fail-safe CloseFPM Seals


Double ActingEPDM SealsPTFE Seats


Double ActingFPM Seals


Double ActingEPDM SealsPTFE Seats


Double ActingFPM Seals


Requires pilot valve - enquire for details.Also available with BSP female threaded connections, and with fail-safe open actuators. Please enquire for details.

Description: In-line ball valve with pneumatic operationMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 75mm - 10 bar;Sizes 90mm and 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion Sockets, Fusion Spigots, BSP Threaded,Flanged BS4504 EN1072 PN10Actuation:Housing Material: Plastic (optional aluminium)Air Actuators: Fail-safe close, Fail-safe open, double actingProtection: IP65Manual Override: OptionalPosition Indicator: IncludedContacts: Optional limit switch box with two mechanical switchesPilot Valve: Solenoid, not included





Size Code Price

Size Code Price

Size Code Price


Size Code Price

Size Code Price

Size Code Price


5

273

actuated valves

Description: In-line pneumatically operated diaphragm valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM, FPM or PTFE (EPDM backed)End Connections: Fusion Spigots, Flanged BS4504 EN1072 PN10, Fusion Socket UnionsActuation:Housing Material: Glass reinforced polypropyleneAir Actuators: Fail-safe close, fail-safe openProtection: IP65Manual Override: IncludedPosition Indicator: IncludedContacts: OptionalPilot Valve: Solenoid, not included

Requires pilot valve - enquire for details.

Praher Type T4 Pneumatically Actuated Diaphragm Valve

Fail-safe CloseEPDM Diaphragm 20 12 5680 255.95

25 12 5682 261.7132 12 5684 370.0040 12 5686 481.2050 12 5688 496.5763 12 5690 611.58

Fail-safe ClosePTFE Diaphragm20 12 5679 243.48

25 12 5681 249.2532 12 5683 353.7540 12 5685 438.1050 12 5687 438.1063 12 5689 545.43

Fail-safe OpenEPDM Diaphragm 20 12 5680 FSO 255.94

25 12 5682 FSO 261.7132 12 5684 FSO 370.0040 12 5686 FSO 481.2150 12 5688 FSO 496.5663 12 5690 FSO 611.59

Fail-safe OpenPTFE Diaphragm20 12 5679 FSO 243.48


Fail-safe CloseEPDM Diaphragm 20 12 5723 297.16

25 12 5725 302.9132 12 5727 394.9640 12 5729 502.3050 12 5731 552.1563 12 5733 671.97

Fail-safe ClosePTFE Diaphragm20 12 5722 284.73

25 12 5724 290.4432 12 5726 370.0040 12 5728 481.2050 12 5730 496.5763 12 5732 580.63

Fail-safe OpenEPDM Diaphragm 20 12 5723 FSO 297.15


Fail-safe OpenPTFE Diaphragm20 12 5722 FSO 284.39


MM Fusion Spigots


Flanged PN10

Flanged PN10 Flanged PN10

Flanged PN10

MM Fusion Spigots

Size Code Price

Size Code Price

Size Code Price


Size Code Price

Size Code Price

Size Code Price


5

274

pressure reducing valves

The function of a pressure reducing valve

Applications for Pressure Reducing Valves

A pressure reducing valve is installed in-line. It is responsible for maintaining the downstream line pressure to the pressure set at the valve.

The valve works by responding to changes in the downstream pressure. For example, assume that there are normally two open valves downstream from the pressure regulator. When one is closed, the back pressure will increase. As this happens, the pressure reducing valve would close down to maintain the downstream pressure. When the valve is re-opened the pressure reducing valve would also open up again until the set pressure was reached.

Under operating conditions the pressure reducing valve is always open which means that it is balanced between the inlet pressure (primary side) and the lower outlet/working pressure. At any rise of working pressure at the valve outlet a pressure compensation via the control bore takes place at the area below the diaphragm. The higher working pressure activates the large diaphragm and lifts the piston against the spring force. The flow reduces and the working pressure drops until the balanced condition is reached again. When the working pressure drops this procedure is reversed. The spring force opens the valve seat against the lower pressure force below the diaphragm. The flow rises until the balanced condition is reached again.

Pre-setting or re-adjustment of the valve set pressure is made by removing the protective cap and by setting the control screw. The counter nut is tightened after final adjustment. When used with neutral fluids, many of the pressure relief valves can be fitted with a pressure gauge if required.


5

275


16 149001 495.60 20 149002 519.56 25 149003 655.66 32 149004 659.49 40 149005 787.97 50 149006 807.11 63 149007 836.86

16 148987 485.03 20 148988 487.91 25 148989 639.39 32 148990 645.14 40 148991 760.18 50 148992 776.46 63 148993 804.26


Description: In-line adjustable valve used to reduce system pressures and to keep the working pressure constantMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 1 to 9 barHysteresis: Approx. 0.1 to 0.4 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Adjustable at any time, even during use. Constant pressure control to± 0.2 bar. Vibration free during operation. Installation is independent of flow direction.Options: Factory fitted pressure gauge available on request.

ASV Stubbe DMV 755 Pressure Reducing Valve

MM Union Fusion SocketsMM Union Fusion Sockets

16 148742 460.59 20 148743 460.59 25 148744 608.54 32 148745 608.54 40 148746 716.76 50 148747 716.76 63 148748 716.76

16 148735 453.45 20 148736 453.45 25 148737 600.35 32 148738 600.35 40 148739 704.03 50 148740 704.03 63 148741 704.03


MM Fusion SpigotsMM Fusion Spigots

Setting Range - 1 to 9 bar

Our expert team are here to help.Call our freephone:

Need advice?

0800 975 79 71Or from outside of the UK:+44 191 521 3111

Size Code Price


Size Code Price


5

276


16 149440 513.8020 149441 519.56

25 149442 672.95 32 149443 677.74 40 149444 800.44 50 149445 819.60 63 149446 850.27

16 149426 505.2120 149427 507.10

25 149428 657.60 32 149429 662.40 40 149430 773.59 50 149431 790.87 63 149432 818.62


Description: In-line adjustable valve used to reduce system pressures and to keep the working pressure constantMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.5 to 9 barHysteresis: Approx. 0.1 to 0.4 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Adjustable at any time, even during use. Constant pressure control to± 0.2 bar. Vibration free during operation. Installation is independent of flow direction.Options: Factory fitted pressure gauge available on request.


MM Union Fusion SocketsMM Union Fusion Sockets

16 149192 478.7720 149193 478.77

25 149194 625.61 32 149195 625.61 40 149196 729.31 50 149197 729.31 63 149198 729.31

16 149185 472.4320 149186 472.43

25 149187 617.55 32 149188 617.55 40 149189 717.53 50 149190 717.53 63 149191 717.53



Setting Range - 0.5 to 9 bar

Size Code Price


Size Code Price


5

277


EPDM Seals 75 148472 2210.19 90 148473 5245.86

Description: In-line adjustable valve used to reduce system pressures and to keep the working pressure constantMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 1 to 6 barHysteresis: Approx. 0.1 to 0.4 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Fusion spigotsFeatures: Adjustable at any time, even during use. Constant pressure control to± 0.2 bar. Installation is independent of flow direction.


MM Fusion Spigots

Setting Range - 1 to 6 bar

Size Code Price

Give our expert team a call:

Don’t know how to use a product?


If you would like to book a visit from the IPS Demo Van, please call:

Let IPS come to you



5

278

pressure relief valves

The function of a pressure relief valve

A pressure relief valve is most often used to protect a system from over-pressurisation, but it can also be used to maintain a constant upstream pressure or even as a non-return valve in certain installations.

Not normally installed as an in-line valve, it only opens when the system pressure exceeds the pressure set against the diaphragm of the valve. When this happens, the excess pressure forces the valve piston off its seat, compressing the spring and allowing fluid to flow through the valve body to discharge. Damping at the valve piston suppresses vibration and fluttering.

The pre-formed diaphragm allows full opening of the valve whilst separating the fluid in the lower body from the bonnet and therefore the atmosphere. The seal is additionally secured by crimped seal O-rings at the diaphragm.

When the system pressure falls back to below the set pressure, the spring forces the piston back into the seat, closing the valve.

Pre-setting or re-adjustment of the valve set pressure is made by removing the protective cap and by setting the control screw. The counter nut is tightened after final adjustment. When used with neutral fluids, many of the pressure reducing valves can be fitted with a pressure gauge if required.

EPDM Seals16 146590 262.6520 146591 268.41

25 146592 372.90 32 146593 378.65 40 146594 489.85 50 146595 509.03 63 146596 543.52

16 146634 235.8020 146635 235.80

25 146636 336.45 32 146637 336.45 40 146638 434.26 50 146639 434.26 63 146640 434.26

FPM Seals

16 146626 232.9520 146627 232.95

25 146628 331.66 32 146629 331.66 40 146630 421.80 50 146631 421.80 63 146632 421.80


16 146582 257.8720 146583 261.71

25 146584 362.34 32 146585 368.13 40 146586 465.86 50 146587 494.81 63 146588 511.93

Description: Adjustable pressure relief and overflow valve, back-pressure safeMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.3 to 10 barOpening Pressure: Approx. 0.5 barHysteresis: Approx. 0.3 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Unique design: valve acts as a non-return valve if there is no pressure on the inlet side. Adjustable at any time, even during use. Vibration free during operation. Maintenance free. High reproducability, low hysteresis.Options: Factory fitted pressure gauge available on request.

ASV Stubbe DHV 712-R Pressure Relief and Non-Return Valve

MM Union Fusion Sockets MM Union Fusion Sockets



For Pressure Relief Valve Applications See Page 136

Size Code Price


Size Code Price


5

279

pressure relief valves

Setting Range0.3 to 4 bar



75 10 148303 1590.73 90 10 148304 2516.98 110 6 148305 3814.66

75 10 148300 1445.32 90 10 148301 2288.77 110 6 148302 3467.88

Description: Adjustable pressure relief valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 75mm & 90mm: 10 bar; 110mm: 6 barPressure Setting Range: Choice of 0.3 to 4 bar, 0.5 to 6 bar or 0.5 to 10 barOpening Pressure: Approx. 0.3 to 0.5 barHysteresis: Maximum approx. 1 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Fusion spigotsFeatures: Adjustable at any time, even during use. Vibration and flutter free during operation. Maintenance free.

ASV Stubbe DHV 712 Pressure Relief Valve


110 6 148326 3814.66 110 6 148325 3467.88


75 10 148317 1590.73 90 10 148318 2516.98

75 10 148315 1445.32 90 10 148316 2288.77


16 146899 194.4720 146900 194.47

25 146901 277.52 32 146902 277.52 40 146903 368.85 50 146904 368.85 63 146905 368.85

MM Fusion Spigots

Sizes 16-63mm


EPDM Seals12 1471 68 172.35

FPM Seals12 1471 60 167.96

Description: Adjustable pressure relief valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.5 to 10 barOpening Pressure: Approx. 0.5 barFluid Temperature Range: 0˚C-70˚CFlow Rate: Up to 500 l/hrConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion socketsFeatures: Ideal for oscillating pumps. Adjustable at any time, even during use. Vibration and flutter free during operation. Diaphragm controlled, insensitive to back-pressure. Installation is independent of flow direction.

ASV Stubbe DHV 718 Pressure Relief Valve

MM Union Fusion Sockets MM Union Fusion Sockets

Size 12mm

Ideal for

Oscillating

Pumps

Size PN Code Price

Size PN Code Price Size PN Code Price

Size PN Code Price Size PN Code Price

Size PN Code Price


Size Code Price


Documents

standards and approvals - IPS Flow Systems · Polypropylene (PP) is a thermoplastic from the polyolefin group of materials. It has low density compared to other thermoplastics, and