Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
- optionalencoder (optional)
backup (optional)Standard or analog GPIO (optional)
AMI - Advanced Metering Interface (optional)SNMP (optional)
At the heart of all FM transmitters in the ELTI range is digital synthesizer-based modulator. From program inputs right through to the final conversion to RF, signal generation and control are performed entirely by digital means. This ensures an exceptionally pure, crystal-clear audio signal with the highest audio fidelity.
The new line of ELTI FM Transmitters provides the highest overall efficiency available on the market, up to 74%! Such tremendous performance can only be achieved by using the latest available technologies combined with an innovative design.
Available in several redundancy concepts (optional)
4
Frequency range
Output impedance
Frequency stability
Spurious and harmonic suppression
FM S/N ratio
Typical AM noise
Bandwidth
Stereophonic crosstalk
Preemphasis
SFN
Processing
87,5 to 108 MHz in 10 kHz steps
50 Ω
≤ 10 per year
≥ 75 dBc Meets or exceeds all ETSI requirements
≥ 80 dB @ 75 kHz deviation
< 0,1% (50 dB) RMS (20-20.000 Hz)
> 20 Hz to 15 kHz @ 0,1 dB
< -50 dB
Optional, 10 MHz input and configurable delay on all program inputs
AGC average gain control, FM Limiter, MPX Power Limiter: conforming to ITU-R 412
Analog stereo audio input
AES
2 x MPX / RDS / SCA inputs
Ports
Power range
VSWR
10 MHz input range
Standards
Marking
Transmitter control via
Front panel
Continuously adjustable from 10% maximum power up to maximum power
< 1:1,1 typical, hardware protection and automatic lowering FWD power if RFL exceeded
-10 dBm to +10 dBm
1999/5/CE (R&TTE), ETS 302 018 (EMC), ETS 300 384 (Radio), NF EN 60215 (Safety)
CE
Front panel, Web GUI, SNMP (v1 and v2c), GPIO, Telnet, RS232
LCD display, LED indicators for CPU, Fault, Warning, RF -3dB, VSWR, Interlock
Efficiency & Efficiency Loss
Power supply
Frequency range
Operating temperature
Humidity
Type and nominal power
Maximum power
Efficiency
Size
Depth
Weight
RF out
FMT 100W
110 W
up to 55%
FMT 300W
320 W
up to 70%
2U
432 mm
6,5 kg
Nf
475 mm
13 kg 14 kg 20 kg
670 mm
3U
DIN 7/16
FMT 750W
750 W
up to 74%
FMT 1000W
1.050 W
up to 72%
FMT 1500W
1.550 W
up to 72%
FMT 2000W
2.050 W
up to 72%
Efficiency up to 74% & efficiency loss @ -3dB < 5%
Single phase: 230V ± 15%
Three phase: 3/N/PE ~ 400/230V ±15%
47 to 63 Hz
0°C to 50°C
5-95% non-condensing
balanced XLR, impedance 110 Ω, bandwidth SW adjustable, level: SW adjustable -20 dBfs and 0 dBfs, sampling frequency auto adjusted up to 192 kHz, word length SW adjustable
between 16, 24, 32 bit
BNC connector, impedance > 5 kΩ unbalanced, level SW adjustable between -18 dBµ and +18 dBµ
RS232, TCP/IP (RJ45), CAN port
INPUTS
RF
STANDARDS AND MARKING
CONTROL AND MONITORING
ENVIRONMENTAL CONDITIONS
Standalone low and medium power FM transmitters
-6
balanced XLR, impedance 600Ω - 10kΩ, level: SW adjustable
FMT 3500W
1 x 3.500W
19” Rack 23U
higher power available on request
135 kg 143 kg 181 kg 270 kg
19” Rack 30U 19” Rack 42U 19” Rack 42U
EIA 7/8” EIA 1 5/8”EIA 1 5/8”EIA 3 1/8 EIA 3 1/8
2 x 3.500W 3 x 3.500W 4 x 3.500WAmplifier
RF output
External dimensions
Weight
FMT 7000W FMT 10000W FMT 14000W
High power FM transmitters – scalable solutions
N