SR intelligent controller

1.General description of SR

2.Features of SR

3.Installation and use of SR software

4.Consultation and service

SR intelligent controller

1.General description of SR

1.1 Appearance introduction

1.2 Specifications and type of SR Series

1.3 All accessory of SR

1.4 Wiring of SR

1. The structure of SR-12MRAC

size ： L*H*D 71*99*55 （ mm)

1. Input of power supply

2. Input Wiring terminal

3. SR-HMI or SR-WRT

4. LCD display panel

5. Output Wiring terminal

1.1 Appearance introduction

SR 12 point main machine SR 22 point main machine

SR 20 point extension module

SR has voice alarm function ,telephone control function and dialing automatically

function .to realize these function ,SR should be matched with the SR-VP voice module.

1. connection port between voice

module and SR

2. connection port between voice

module and communication cable

3. audio output port

4. SPK

5. on-line recording audio input port

6. socket of telephone crystal plug

7. indicator of the power and recording

8. power input (AC or DC)

2. structure of voice module (SR-VPA/VPD)

5

68

12

3

4

7

Use a wireless transmitter and a receiver to control the ON/OFF status of output of SR.The remote distance can reach 70m.

3. structure of receiver and transmitter

4

1

5

2

3

6

1. the interface to SR or

voice module

2. the communication port

to connect receiver to

computer

3. the antenna of receiver

4. the power

5. power indicator

6. SR-TC transmitter

Type Power Input Output RemarksSR-12MRAC AC110-220V 8 point AC input 4 point relay output With real-time clock

SR-12MRDC DC12-24V8 point DC input

( 6 point analog)4 point relay output With real-time clock

SR-12MTDC DC12-24V8 point DC input

( 6 point analog)

4 points NPN type

Transistor outputWith real-time clock

SR-12MGDC DC12-24V8 point DC input

( 6 point analog)

4 points PNP type

Transistor outputWith real-time clock

SR-22MRAC AC110-220V 14 point AC input 8 point relay output With real-time clock

SR-22MRDC DC12-24V14 point DC input

( 8 point analog)

8 point relay outputWith real-time clock

SR-22MTDC DC12-24V14 point DC input

( 8 point analog)

8 points NPN type

Transistor outputWith real-time clock

SR-22MGDC DC12-24V14 point DC input

( 8 point analog)

8 points PNP type

Transistor outputWith real-time clock

SR-20ERA AC110-220V 12 point AC input 8 point relay output

20 point extension module

SR-20ERD DC12-24V 12 point DC input 8 point relay output

SR-20ETD DC12-24V12 point DC input 8 points NPN type

Transistor output

SR-20EGD DC12-24V12 point DC input 8 points PNP type

Transistor output

Specifications and type of SR Series

SR-HMI

SR-WRT

Human machine interface

Programming panel

All accessory

SR-CP

Communication interface wire between SR and PC

SR-AUD

The recording microphone and the wires between the sound card of the PC and the SR-VPA/VPD

SR-ECB

Lengthened connecting bridge ,to remotely connect the machine and other module

All accessory

SR-EHC

Remotely connect SR machine and SR-HMI

SR-PC

The decorating cover on the SR

SR-CB

Connecting bridge. To connect the machine and other module

All accessory

SR-EANT

Remote receiving module

SR-RCA/RCD

SR-TC

Remote transmitter

All accessory

Lengthened connecting antenna between SR-RCA

and SR-RCD

1. The wiring of SR 8 point input and 4 point output

The maximum output current that can be supplied by SR, is 10A for resistance load and 2A for inductive load

Wiring

power

Input wiring terminal

output wiring terminal

power

Input wiring terminal

output wiring terminal

2. The wiring of SR 14 point input and 8 point output

Wiring

3.The D （ NPN) transistor output wiring

Note

1. The “-” terminal of the load power must be connected with the “M” terminal of

SR power .a load must be connected with the “+” terminal of the load power

2. The load connecting voltage must be ≤ 80VDC and must be DC

Wiring

M

output

Note

1. The “+” terminal of the load power must be connected with the “L+” terminal of SR power. a load must be connected with the “-” terminal of the load power

2. The load connecting voltage must be ≤ 80VDC and must be DC

Wiring

4.The GD （ PNP) transistor output wiring

L

output

5.the connecting diagram of SR and SR-VPA and CP

Wiring

1. Removable programming panel ( SR-WRT)

2. Flexible human-machine interface (SR-HMI)

3. With the function blocks used for programming ,the program storage capacity of SR is large

Features

4. External extendable input/output

5. Real time clock function

6. Analog input and transmission

7. Security cipher code function

8. Telephone function

9. Wireless control

10. Free programming software (Super CAD)

1. Comparison with conditional PLC, The superiority of SR

1. Don’t need additional program implement

2. it is simple and easy for the learner to use and master it

1.Save system connection and debugging time

3.The timer can be used to setup one year time

2.modify circuit easily maintenance convenience

SR Key Point

2. Comparison with conditional circuit, The superiority of SR

Super CAD （ SR software ）

8 basic function module

AND Series connection of NO contacts

AND +RLO

NOT phase inverter

OR Parallel connection of NO contacts

NAND Parallel connection of NC contacts with RLO borderline test

NOR Series connection of NC contacts

OR Parallel connection of NC contacts (normal close)

XOR Dual communicator contact

14 special function module

Put through postponed

Cut postponed

Single impulse relay

Impulse relay

Clock impulse relay

Keep through and postponed Relay

RS Relay

Omnipotence counter

Clock switch

Simulated compare machine

Timer Order

Step Order

Add/Minus Clock

Time Data compare

Super CAD （ SR software ）

8 input and output blocks

Control in

Control out

Remote control input dot

Telephone module to dial the set telephone andplay the set message

Voice play module to play the set message

Node Connects the two points of the same code and different directions

LCD edit Module

Double audio frequency pulse

Super CAD （ SR software ）