SPT International Ltd. Portable Hydraulic Punching Units

www.steelexnetwork.com

Phone : +442081233824 Fax : +442071171993 E-mail : sales@steelexinternational.net Web : www.steelexinternational.net

The SPT International Ltd Portable Hydraulic Punching Units give rapid production of holes and slots on I Beam, Channel, angle and flat bar. With Single and Double Effect Models for punching in both the web and flanges of I beam these units give great flexibility and cost effective hole production. The smaller units are hand held and the larger units are suspended and balanced and both types can be used to produce round, oblong, square and special shaped holes as required. The range of Portable Punching Units has

Copyright Steelex International Ltd All rights reserved

Double Effect Units

AL 40 x 110 AL 83 x 160 AL 120 x 250 AL 170 x 160

Tonnage Capacity 40 83 120 170

Dimension “G” mm 110 160 250 160

Dimension “T” mm 24 28 40 40

Dimension “M” mm 112 165 270 265

Dimension “E” mm 30 100 130 130

Punching Stroke (mm) 25 35 40 50

Maximum Diameter for Punching (mm)

24 through 14 35 through 17 50 through 16 50 through 27

Maximum Punching Thickness (mm)

17 25 30 36

Working Pressure (bar) 315 315 315 315

Power Pack C10 C10 C10/C15 C15

Hose Length (m) 6 6 6 6

Double Effect - Flange Type ( Punching Capacity based on Material with 42 Kg/mm2 Resistance )

C3 Power Pack

Three Phase, 3HP Height : 550mm Width : 400mm Depth : 600mm

Mounted on Wheels 8L Oil Tank

C10 Power Pack Three Phase, 10HP

Height : 800mm Width : 600mm Depth : 950mm

Mounted on Wheels 80L Oil Tank

C15 Power Pack Three Phase, 15HP

Height : 800mm Width : 600mm Depth : 1200mm

Mounted on Wheels 120L Oil Tank Two Handed Start Control

These units can be suspended on a balancing spring to make the movement very easy while maintaining the correct orientation to the beam. They can also be fixed to a bench by using the two drill and tapped holes in the lower part of the main body.

Steelex International Ltd. Portable Hydraulic Punching Units

www.steelexnetwork.com

Phone : +442081233824 Fax : +442071171993 E-mail : sales@steelexinternational.net Web : www.steelexinternational.net

Copyright Steelex International Ltd All rights reserved

AN 40 x 200 AN 66 x 300 AN 100 x 500

Tonnage Capacity 40 66 100

Dimension “G” mm 200 300 500

Dimension “T” mm 17.5 28 28

Dimension “M” mm 310 380 600

Dimension “E” mm 160 260 400

Punching Stroke (mm) 24 35 40

Maximum Diameter for Punching (mm)

24 through 14 24 through 14 35 through 21

Maximum Punching Thickness (mm)

17 22 28

Working Pressure (bar)

315 315 315

Power Pack C10 C10 C15

Hose Length (m) 6 6 6

Double Effect - Web Type ( Punching Capacity based on Material with 42 Kg/mm2 Resistance )

Single Effect Units ( Punching Capacity based on Material with 42 Kg/mm2 Resistance )

AL-30 Flange AL-44 Flange AN-44 Web

Tonnage Capacity 30 44 44

Dimension “G” mm 70 120 210

Dimension “T” mm 17.5 21 17.5

Dimension “M” mm 110 112 305

Dimension “E” mm 25 25 155

Punching Stroke (mm) 25 25 25

Maximum Diameter for Punching (mm)

24 through 10 24 through 14 24 through 14

Maximum Punching Thickness (mm)

18 18 18

Working Pressure (bar)

700 700 700

Power Pack Giuliana Giuliana Giuliana

Hose Length (m) 5 5 5

These units can be hand held or suspended on a balancing spring. All machines come with quick change tooling

and can be fitted with a length stop if required.

All units are CE Marked.