A panel the same size asthe screen fills the opening.

Screen is then advancedto fill the opening.

Just mechanism as supplied.Four separate mechanismsmake up the kit.

Screen AdvanceSA Included

Panel Mechanism SPS800 Included

Panel DriveW1400 Included

Panel Mechanism SPS800 Included

Panel drops back and lifts.

FUNCTION

This mechanism takes apanel inwards and out of site behind surrounding

panel work before advancing the screen to sit flush with

the wall.

SUITABILITY

This technical sheet is forthe smaller version of the mechanism. It is typically

suitable for screens up to 55". See chart below for other

restrictions. Please note the panel weight restriction is

15Kg [33.1lb]on all models.

SPECIFYINGThe mechanism requires

the screen to be recessed into the wall or purpose designed cabinet work.

CONTROL

Supplied with basic infraredremote. Can be learnt by

many learning remotes.

Also has switch control andRS232 so can be operated by

relays, switches, Crestron /AMX or Lutron systems.

DESIGN HIGHLIGHTS

Quiet smooth three motor•system.

Space efficient design.•

Unique functionality.•

Wide range of cabinetry •and wall design options.

OPTIONS

Marine suitable. •

Horizontal versions.•

Horizontal two panel •systems.

Vertical two panel systems.•

Larger screen options.•

Combination with the QA•articulated arm.

WARNINGIt is the responsibility ofthe installer to warn allpotential end users of

the dangers of interferingwith mechanisms during

operation

IMPORTANT

Mechanisms which liftor move weights need

to be checked on ayearly basis for anydamage which mayresult in an accident

The Panel Mechanisms andthe Panel Drive are all telescopicto efficiently accommodate differentscreen sizes.

MODEL SCREEN ADVANCE (MAX SCREEN WEIGHT) PANEL DRIVE (SCREEN WIDTH) PANEL MECHANISM

(MAX SCREEN HEIGHT)THIS TECHNICAL

SHEET

SPS800V + SA SA (50Kg , 110lb) W1400 (880mm TO 1400mm) (34.6" TO 55.1") SPS800 (785mm, 30.9") X

SPS1200V + SA SA (50Kg, 110lb) W1700 (1200mm TO 1700mm) (47.2" TO 66") SPS1200 (1185mm, 46.6")

SPS1200V + SAH SAH (120Kg, 265lb) W2100 (1600mm TO 2100mm) (63" TO 82.5") SPS1200 (1185mm, 46.6")

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

SPS800V+SA- SLIDING PANEL MECHANISM Technical SheetISSUE 003

SHEET 1 of 4

A

A

10.2260

SCREENHEIGHT

+50MM [2.0]

OPENING HEIGHT IS SCREEN HEIGHT +10mm [0.4]

SECTION A-A SCALE 1 : 8

Screen - IN

B

B

1.640

0.820

0.25

0.820

SECTION B-B SCALE 1 : 8

Screen - OUT

Screen

The moving panelis 20mm thick.A thicker panel willadd to the cabinet depth.

ScreenAdvanceMechanismSA

SCREEN WIDTH + 270mm

5.3135

5.3135 SPS800V +SA

This page and the next show•the dimensions for the SPS800V + SA. This model is made of the following three parts:

The SPS800V Panel Mechanism •allows a maximum screen height of 785mm [30.9] as the panel can lift or drop by 795mm [31.3]. Maximum panel weight is 15Kg [33.1lb].

The W1400 Panel Drive •Mechanism allows a width of screen from 880mm [34.6] to 1400mm [55.1]. (Other Panel Drive mechanisms are available)

•The Screen Advance SA bracket •can support a screen of up to 50Kg [110lbs] in weight.

MOVING PANEL ISTHE SAME SIZE AS

THE SCREEN

IMPORTANT NOTES

The front panel must be removable to make •installation possible. See the next page of this document for a suggested system.

Maximum panel weight of 15 Kg [33.1lb] must •be observed.

The 260mm [10.2] depth can be increased to •accommodate thicker screens. For example a 130mm [5.1] deep screen would require a cabinet depth of 290mm[11.4].

The 260mm [10.2] depth can be decreased to •accommodate thinner screens. For example a 60mm [2.4] deep screen would require a cabinet depth of 220mm[8.7]. This is theMINIMUM DEPTH possible. Thinner screenswould require this depth and some packingspacers.

The moving panel moves back by exactly 40mm [1.6] before lifting. For this reasonit is advised the front panelis only 20mm [0.8] thick to give 20mm[0.8] clearance.

This depth of 260mm willallow a maximum screendepth of 100mm [3.9].

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

SPS800V+SA- SLIDING PANEL MECHANISM Technical SheetISSUE 003

SHEET 2 of 4

C C

5.1130

5.1130

0.25

0.25

SECTION C-C SCALE 1 : 10

OPENING WIDTH IS SCREEN WIDTH

+ 10MM [0.4]

26.8680

15

.740

0

0 - CL OPENING

263

10.4264

6.4163

0 -

C L

14

.937

8

16

.241

1

14

.937

8

16

.241

1

16.2412

AdjustableUprights

20mm +[0.8]

SCREENHEIGHT+50mm

[2.0]

Panel dropsinstead of lifting.

SPS800V +SA

The Screen Advance bracket can accommodate a screen bolt pattern up to: 680mm [26.8] wide by 400mm [15.7] high. Up to M8 diameter fixings.

The bracket sits centrally in the panel opening.

Panel Down OptionThe section to the right and the image below show the Panel Mechanism and the Panel Drive upside down. This will enable the panel to go in and then to drop instead of lifting.

The Screen Advance bracket is left the standard way up. The standard mechanism can be configured like this with no modification.

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

SPS800V+SA- SLIDING PANEL MECHANISM Technical SheetISSUE 003

SHEET 3 of 4

Upper Panel

Side AccessDoors.

Side AccessDoors.

4.

Moving PanelMounting Plates

Moving Panel

Moving Panel

SurroundingFront Panel

Screen Advance Mechanism

Panel Drive Mechanism

Panel Mechanism

Panel Mechanism

Lower Panelcan be fixed.

Good accessfor Panel Drive

8.3210

2.052

5.9150

SPS Essential Access1. 2.

3.

The SPS mechanism requires some •thought to the cabinet design to make sure the mechanism elements are all easily accessible for fixing in place and for making adjustments. Poorly designed cabinets will result in a lot of wasted time during installation and setting up.

Poor access can result in compromises •being made on panel alignment and effect the quality of the installation.

There are many styles of panel work that •lend themselves to this mechanism, but ultimately all surrounding front panel work should be removable to aid in fitting of the different mechanism elements. (1)

Image 2 shows the best system, where •different panels are removable to get access at different stages of the installation and set up.

In image 3 the upper panel is removed to •get access to install the Panel Drive part of this mechanism.

(4) With the upper panel in place, good •access is still possible to the Moving panel mounting plates with the side doors. These access doors enable the main moving panel to be finely adjusted.

A control box is supplied on a 3m [10'] •flying lead. This must be fitted in an easily accessible location. This will be the first item to be checked if the mechanism stops working. Infrared, contact closure and power connections are all made here.

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

SPS800V+SA- SLIDING PANEL MECHANISM Technical SheetISSUE 003

SHEET 4 of 4