8
simplicity deployed. Mobile Backhaul Business Services & Cloud Assurance Carrier Exchange Network Fiber Conservation (WDM) Network Management NORTH AMERICA Worldwide Headquarters United States tel: 952.582.6550 toll free: 800.526.9267 fax: 952.941.2322 Canada tel: +1 952.996.1550 fax: +1 952.941.2322 LATIN AMERICA Mexico / Central America / Caribbean tel: +1 952.996.1690 fax: +1 952.941.2322 South America tel: +54 11 4554 8076 fax: +1 952.941.2322 Brazil tel: +55 11 8244 7630 fax: +1 952.941.2322 EUROPE, MIDDLE EAST & AFRICA EMEA / European Headquarters tel: +49 611 974 8460 fax: +49 611 950 4672 Transition Networks Europe tel: +44 1428 752 900 fax: +44 1428 752 901 Central Europe tel: +49 611 974 84 60 fax: +49 611 950 4672 Eastern Europe / Southern Europe / Middle East tel: +420 2 2426 6901 fax: +420 2 2426 6854 Balkans / Caspian Region tel: : +40 724 254 890 fax: +40 314 040 331 South East Europe, Egypt & Lebanon Tel: +359 88 448 4040 France & Afrique Francophone tel: +33 160 423 042 fax: +49 611 950 4672 UK / Ireland tel: +44 7557 22 11 14 Africa tel: +44 1204 65 80 90 fax: +44 1204 60 77 42 ASIA Japan / Korea tel: +81 3 5403 6470 fax: +81 3 5403 6471 Southeast Asia / Hong Kong / India tel: +65 9736 8385 fax: +1 952.941.2322 Part Number 901024 Technical information in this document is subject to change without notice. www.transition.com/telco www.simplicitydeployed.com

Sps Guide

Embed Size (px)

DESCRIPTION

Sps Guide

Citation preview

simplicity deployed.

Mobile BackhaulBusiness Services & Cloud AssuranceCarrier Exchange NetworkFiber Conservation (WDM)Network Management

NORTH AMERICAWorldwide Headquarters

United Statestel: 952.582.6550toll free: 800.526.9267fax: 952.941.2322

Canadatel: +1 952.996.1550fax: +1 952.941.2322

LATIN AMERICAMexico / Central America / Caribbeantel: +1 952.996.1690fax: +1 952.941.2322

South Americatel: +54 11 4554 8076fax: +1 952.941.2322

Braziltel: +55 11 8244 7630fax: +1 952.941.2322

EUROPE, MIDDLE EAST & AFRICA EMEA / European Headquarters tel: +49 611 974 8460 fax: +49 611 950 4672

Transition Networks Europe tel: +44 1428 752 900 fax: +44 1428 752 901

Central Europe tel: +49 611 974 84 60 fax: +49 611 950 4672

Eastern Europe / Southern Europe / Middle East tel: +420 2 2426 6901 fax: +420 2 2426 6854

Balkans / Caspian Region tel: : +40 724 254 890 fax: +40 314 040 331

South East Europe, Egypt & LebanonTel: +359 88 448 4040

France & Afrique Francophonetel: +33 160 423 042 fax: +49 611 950 4672

UK / Ireland tel: +44 7557 22 11 14

Africa tel: +44 1204 65 80 90fax: +44 1204 60 77 42

ASIAJapan / Koreatel: +81 3 5403 6470fax: +81 3 5403 6471

Southeast Asia / Hong Kong / Indiatel: +65 9736 8385fax: +1 952.941.2322

Part Number 901024

Technical information in this document is subject to change without notice.

www.transition.com/telcowww.simplicitydeployed.com

Simplicity DeployedTransition Networks is an industry leader with over 25 years experience designing and manufacturing carrier grade products. With “Simplicity Deployed” we make it simple to grow your revenue, grow your services, satisfy your customers, and stay ahead of the competition.

Our vast product portfolio is designed to support a wide range of expanding market needs including mobile backhaul, business services and cloud assurance, carrier exchange networks, and fiber conservation. Transition Networks products provide true carrier-grade quality, reliability, performance and protection for TDM, Circuit Emulation Services (CES) and Carrier Ethernet services. Transition Networks provides cost-effective products to build your next generation network and ease the migration of legacy services while increasing revenue and reducing operating expenses.

At Transition Networks we strive to help our customers identify products to solve today’s business problems while future proofing for tomorrow. This consultative approach enables us to better understand your unique requirements and to ensure you are able to grow your revenue, grow your services and satisfy your customers.

Transition Networks Advantages• Leader in carrier grade products for mobile backhaul and business services

• Simplicity Deployed » CE 2.0-based EMS for provisioning and performance management » Simplified turnkey solutions for a variety of applications

• Successfully deployed over 100,000 NIDs

• Multiple NID families and complementary access/aggregation switches

• Active member of ITU, IEEE, IETF, and MEF

• ISO 9001 and 14001 certified

• One of the first vendors to achieve MEF CE 2.0 certified products

• Sold MEF CE 1.0 products since 2007

• Unrivaled technical advisory services

• Established relationships and quarterly business reviews

• Experts in fiber integration

• Strong understanding of our customer’s problems and markets

• Outstanding customer and technical support 24 x 7 x 365

• Financially stable company founded in 1987

• Global Customer Base and Sales Force

• U.S. Based Company

• Applications: Mobile Backhaul 3 Business & Cloud Services 5 Fiber Conservation (WDM) 7 Carrier Exchange Network 9 Network Management 11

• Product Families 13

• Product Matrix 14

Mobile Backhaul• 2G, 3G, 4G LTE• Circuit Emulation

Business Services• WAN Connect• Inter-Office Communication

Carrier Exchange Network• Fiber Extension• Cross-Connect

Fiber Conservation (WDM)• Optimize Existing Fiber• Increase Bandwidth

Transition Networks knows that simplicity is at the heart of finding easier ways to manage your network, so that you can concentrate on what matters – satisfying customers and increasing revenues. Our strong service life cycle automation allows you to better compete and control your operating costs, while guaranteeing network performance through service assurance.

Carrier Exchange NetworkWhen meet-me-room and customer connections are beyond the reach of your copper infrastructure, Transition Networks offers high quality, low latency, layer one, copper to fiber extension devices designed for plug-n-play installation.

Mobile BackhaulTo address backhaul requirements for any generation cell service, Transition Networks manufactures a variety of demarcation and aggregation devices. Whether TDM, Circuit Emulation Services (CES) or Carrier Ethernet; Transition Networks simplifies your backhaul network by providing advanced performance statistics with an easy to use management platform.

Fiber ConservationWith increasing reliance on fiber optic infrastructures, Transition Networks offers CWDM to instantly increase capacity. Our plug-n-play CWDM is a cost effective way to reclaim and maximize your existing fiber infrastructure.

Business & Cloud AssuranceFrom simple demarcation to fully protected services, Transition Networks’ portfolio of TDM and Carrier Ethernet products allow you to realize faster return on investment and reduced operating expenses while maximizing customer uptime.

Network ManagementTransition Networks Element and Service Management platform significantly accelerates service turn-up while reducing time-to-revenue and time-to-service. Its open architecture works in a multi-vendor ecosystem and will support next generation service delivery workflows.

Mobile Backhaul

TDM over IP

3G CDMA & HSPA+

PacketBand

n x T1

3G & 3GHS DPA Mobile Switching Center - MTSO

Central Office RNC Aggregation

End-to-End Synchronization

2G/3G GSM & GPRS

ETHERNET / IP / MPLS

Recovered Clock

PacketBand

UNI

LTE

EthernetS3280

Fiber

Fiber

Fiber

Fiber

Fiber

LTE (VoLTE)

S4140 10GB Ethernet

Remote ManagementAuto ProvisioningSLA Validation

End-to-End SLA Monitoring & Diagnostics with 802.3ah, 802.1ag and Y.1731

Timing Synchronization (1588v2 / SyncE)

Service Validation RFC-2544 / Y.1564

ERPS(G.8032)

S3280-TSTLTE

Ethernet

S3280PacketBand-TDM-32, S4224, ION Chassis

Circuit Emulation Services (CES) Next generation Ethernet networks are being deployed on a large scale. However, there are still supplementary 2G & 3G base stations already in service. Transition Networks offers a complete “carrier class” CES platform that helps converge TDM to Ethernet utilizing either SAToP or CESoP technology.

Available in a wide range of Ethernet and T1/E1 interfaces these products offer highly-accurate distributed clocking features that exceed ITU G.823 synchronization standards. CES is optimized for new mobile services, while retaining investments in legacy backhaul equipment.

Transition Networks CES products are designed for ultra-low latency and have advanced clock recovery algorithms for critical timing and synchronization required in mobile backhaul networks. CES provides a means to converge any TDM service (Voice, Video, Data) to any IP, MPLS or Ethernet network transport.

Carrier EthernetTo support new LTE expansions and builds for an all IP/Ethernet fiber backhaul network, Transition Networks offers a series of intelligent Network Interface Devices (NIDs) in both stand-alone and chassis based models.

Built for complete end-to-end connectivity fault and performance management, each multiport NID can be independently provisioned for IEEE 802.3ah, IEEE 802.1ag and ITU Y.1731. These devices support IEEE 1588v2 and SyncE, methods needed to ensure synchronization requirements, while providing stability for base station frequency and handovers.

These cost effective devices reduce your OpEx & CapEx while ensuring superior performance, high availability and SLA assurance all supported by Transition Networks expert technical support team and industry leading warranty.

• ITU G.8031/G.8032

• IEEE 1588v2

• SyncE

• RFC-2544 / Y.1564

• IEEE 802.3ah/802.1ag

• ITU Y.1731

• CE 2.0 & 1.0

• VLAN with Q-in-Q

• IPv4 and IPv6

• SNMP v1, v2c, v3

• Multi-COS

• Jumbo Frame Support

• Extended Operating Tem-perature

• Redundant, hot-swappable power supplies

• SSL/SSH

• RADIUS, TACSAS+ and ACL

• Management VLAN

• Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP

• 10/100/1000Base RJ45 Interfaces; 100/1000Mbps SFP Interfaces

• G.704 grooming

• External clock sources

• Highly accurate and stable clock recovery

• G.823 Synchronization levels

• Redundant, hot-swappable power supplies

• TDM packets can be assigned IP Diffserv (DSCP) or ToS and 802.1p CoS values

• Supports 802.1p CoS prioritization

• 802.1Q VLAN including Q-in-Q

• Rate limiting

PacketBand-TDM-4

PacketBand-TDM-16/32

PacketBand-TDM-1S4212 S4224

S3231 S3280

S4140

3 4

Business & Cloud Services

TDM over IP

Ethernet

TDM over IP

Ethernet

METRO(Ethernet / IP / MPLS)

Headquarters Branch A

ACCESS(Ethernet )

ACCESS(Ethernet)

NNINNI

UNI

S3280EVCUNI

S3280

PacketBand

S4212

PacketBand

Fiber Fiber

Remote ManagementAuto ProvisioningSLA Validation

S4224

ITU-T Y.1731IEEE 802.1agIEEE 802.3ahFiber

ITU-T Y.1731IEEE 802.1agIEEE 802.3ahFiber

While customers world-wide continue to use TDM/ISDN networks for specific applications, including Public Switched Networks (PSN) for voice traffic, most are aggressively looking to reduce operational and management costs by merging all traffic (voice, video, data) to an all IP Ethernet infrastructure.

Transition provides an economical path forward, to cost effectively migrate all TDM/ISDN traffic to IP/ Ethernet using carrier-class technology offered in our PacketBand TDM/ISDN products. Equally important are the performance requirements for the T1/E1 services. These TDM over IP circuits must continue to meet or exceed legacy Sonet/SDH network performance characteristics, including G.823, G.824, and G.8261.

Knowing that all networks are not designed the same; Packetband is tunable to accommodate any IP network including MPLS and Ethernet. Designed and proven for transporting highly-accurate clocked TDM/ISDN circuits over packet switch networks, Packetband offers G.703/4, and X.21/V.35 over IP/Ethernet. These products provide an evolutionary path for bridging the gap between TDM/ISDN and packet based networks.

Circuit Emulation Services (CES)

• Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP

• 10/100/1000Base RJ45 Interfaces; 100/1000Mbps SFP Interfaces

• G.704 grooming

• External clock sources

• Highly accurate and stable clock recovery

• G.823 Synchronization levels

• Redundant, hot-swappable power supplies

• TDM packets can be assigned IP Diffserv (DSCP) or ToS and 802.1p CoS values

• Supports 802.1p CoS prioritization

• 802.1Q VLAN including Q-in-Q

• Rate limiting

PacketBand-TDM-16/32

PacketBand-ISDN-B-4

In today’s fast-paced environment, the ability to provide businesses with applications that run over reliable Ethernet-based services is more critical than ever. Business class Ethernet has become the choice for small, medium, and large businesses as industry standards have evolved to include stringent and high-availability networking requirements.

Commercial enterprises, both private and public, including government agencies and service providers, are quickly migrating to an all packet-based network for transparent WAN/LAN, VPLS, VoIP, Video Conferencing, and other mission critical applications. Most service providers are responding to these changing requirements by offering flexible bandwidth services, multi-point connectivity and flow-level CoS profiling, policing and shaping.

Transition Networks understands that business class Ethernet services require reliable, scalable, and flexible architectures that offer the ability to add additional Ethernet services and applications, while growing the number of users on a network, must be completely transparent while guaranteeing customer satisfaction with increased reliability and uptime. Transition’s extensive portfolio of business class Ethernet products are designed for both critical Enterprise applications and Service Provider networks.

Carrier Ethernet

• ITU G.8031/G.8032

• IEEE 1588v2

• IEEE 802.3ah/802.1ag

• ITU Y.1731

• VLAN with Q-in-Q

• RFC2544 / Y.1564

• IPv4 and IPv6

• SNMP v1, v2c, v3

• Multi-COS

• Jumbo Frame Support

• Extended Operating Tem-perature

• Redundant, hot-swappable power supplies

• SSL/SSH

• RADIUS, TACSAS+ and ACL

• Management VLAN

S3280

S3231 S3220 S2220

S4140

S4212 S4224

5 6

T1/E1SONET OCxFAST ETHERNETGIGABIT ETHERNET10G ETHERNET

Fiber Conservation

Wave Division Multiplexing (WDM)Users of today’s voice, video, and data networks are becoming more complex, requiring more bandwidth and faster data transmission rates over increasing distances. In order to meet these demands, Service Providers and Enterprise Corporations are relying more and more on fiber optic infrastructures.

When all available fiber lines are exhausted; to counteract the expense and time associated with trenching more fiber, many network managers are increasing capacity on existing fiber optic infrastructure by using Coarse Wavelength Division Multiplexing (CWDM) technologies.

This layer-one, plug-n-play solution for increasing fiber capacity eliminates the cost and time constraints associated with deploying more fiber, while allowing for up to 16x the capacity on existing fiber strands with next to no down time.

• Instantly increase bandwidth/capacity on existing fiber

• Attractive cost versus new fiber deployments

• Mix multiple protocols and speeds over the same fiber

• Completely passive solution

• Layer 1 connectivity and plug and play provisioning

• Modular design allows for pay-as-you-grow expansion

X2, XFP, SFP+SFP

CWDM-M847LCR

7 8

Carrier Exchange Network

WAN

Customer Cage

Fiber Extends Beyond 100m

Meet Me Room

ION Chassis100 METER COPPER LIMIT

ION Chassis

• Increase the connection distance for meet-me-room or cross connects

• Scalable with the ability to expand and contract at a moment’s notice

• Modules are hot-swappable and can be added or interchanged as needs grow

• Extend TDM (T1/E1 - DS3/T3/E3) and Ethernet (10Mbps – 10Gbps)

• A single Media Cross Connect used for a wide variety of applications (Voice, Video, & Data)

• Reduces power consumption (average of 3 watts per converter)

ION Management ModuleIONPS-A, IONPS-D

Data Center / ColocationMany Carrier Hotels and large Data Center facilities are often met with the distance limitation of copper cabling. Adding Transition Networks’ Copper to Fiber products to your Data Center allows you to maintain a Physical Layer, Transparent, Pass-through connection between the customer cage and the Meet-Me-Room (MMR).

The use of media conversion gives the customer and carrier the reassurance that the data is NOT passing through a switched network. This guarantees that the customer will have no added latency, no jitter, no packet inspections and no potential traffic sniffing.

Transition Networks has a broad portfolio of plug-n-play, stand alone and slide-in-card media converters. Built to support multiple protocols (TDM and Ethernet) across any interface and physical infrastructure.

ION Chassis

C3110, C2110, C3210C6110 C6210

9 10

Network Management

Transition Networks understands the complexity of your network and the operational expenses associated with its management, which can account for up to 80% of a service provider’s budget.

Interoperability within a multi-vendor ecosystem is assured through our open service provisioning and operations APIs and the implementation of MEF Standard CE 2.0 service definitions.

CONVERGE™ Meets your management needs for today and the futureConverge™ Element and Service Management System features a comprehensive Carrier Ethernet 2.0 service management suite for quick and efficient provisioning of end-to-end Carrier Ethernet services.

Converge™ EMS significantly accelerates service turn-up, reducing a service provider’s time-to-revenue and time-to-service. Converge™ EMS addresses the needs of customers deploying CE 2.0 services, bringing simplicity to the provisioning and monitoring of services.

CONVERGE™ EMS

• Carrier grade, comprehensive CE 2.0 based Element and Service Management System

• Simplified Service centric Provisioning with reusable CE 2.0 templates and the ability design a catalog of services

• Enable OAM automatically, pre-provision services with feasibility checks

• Pro Active Fault Management with faults correlated to services/customers

• Performance Monitoring with Threshold Crossing Alerts (TCAs) to monitor services and meet SLAs.

• Bulk provisioning with Scheduled backup/restore, mass firmware upgrades

• Custom Users and user roles management, user auditing, internal or external authentication

• Standards based APIs allow easy integration with higher level OSS

1: Define Templates

2: Create Catalog of Service Offerings

3: Choose End Points, validate SLA and provision service

12 3Triple Play -1

Triple Play -2

Triple Play -3

Triple PlayEVPL

End to End EPL

GOLD

SILVER

BRONZE

End to End EVPL

10 Mbps

50 Mbps

100 Mbps

UNI

S3280S3280

S3280

EVC

NOC

EVCEVC

SLA Threshold

Jitte

r

S3280 S3280

S3280

Proactive Troubleshooting

TCAs

Alert

=

CONVERGE™ EMS

• Accelerate time-to-revenue

• Increase customer satisfaction

• Improve end-to-end network visibility

• Simplify service delivery and operations

• Interoperable in a multi-vendor environment

One Simple Solution

11 12

• Central chassis for remote management and fault detection

• Configure via dip switches or management module

• Transparently pass customer traffic including VLANs

• Alarms and traps for quick fault detection

• Plug-n-Play installation

• AutoCross™• Automatic Link Restoration

• 10MB, 100MB, 1GB, 10GB

Data Center / Colocation IONMM | x3110 | x2110 | IONPS-D | IONPS-A | ION219

Product OverviewEthernet NIDs

• Ethernet OAM support including IEEE 802.3ah (Link OAM), IEEE 802.1ag (Service OAM), and ITU Y.1731 (Performance Monitoring)

• IEEE 802.1p Quality of Service (QoS)

• IEEE 802.1Q VLANs including C-Tag / S-Tag

• Advanced security features: SSL, SSH, Multi-layer Access Control Lists (ACL), RADIUS, TACACS+ and Management VLANs

• Redundant, hot swappable power supplies (AC and DC options)

• Advanced timing IEEE 1588v2 (also known as Precision Time Protocol, PTP) and SyncE

• Ring Protection: » Sub 50ms Ring Protection: ITU G.8032 » IEEE STP, RSTP, MSTP

• IPv6 and IPv4 support

• Interfaces from 100Mbps to 10Gbps

• MEF CE 2.0 and MEF CE 1.0 (9, 14 and 21) certified

S4140 | S3280 | S3230

Ethernet Access/Aggregation Switches• Ethernet OAM support including IEEE 802.3ah (Link

OAM), IEEE 802.1ag (Service OAM), and ITU Y.1731 (Performance Monitoring)

• Ring Protection:

» Sub 50ms Ring Protection: ITU G.8032 » IEEE STP, RSTP, MSTP

• IEEE 802.1p Quality of Service (QoS)

• IEEE 802.1Q VLANs including C-Tag / S-Tag

• Extended operating temperature range

• Advanced security features: SSL, SSH, Multi-layer Access Control Lists (ACL), RADIUS, TACACS+ and Management VLANs

• Redundant, hot swappable power supplies (AC and DC options)

• Advanced timing IEEE 1588v2 (also known as Precision Time Protocol, PTP) and SyncE

• IPv6 and IPv4 support

• 100/1000Mbps interfaces with 10Gbps uplink interfaces

• MEF CE 2.0 compliant

S4212 | S4224

Circuit Emulation Services• Multi-standard TDM pseudowire support: CESoPSN,

SATOP, TDM over IP

• Highly accurate and stable clock recovery

• G.823 Synchronization levels - Exceed 20ppb

• Remote management

• Extended Operating Temperature

• Redundant, hot-swappable power supplies

• Full / Fractional Service

• G.703 & G.704 support

• Industry Leading Clock Recovery

• LACP - Load Balancing

PacketBand-TDM | PacketBand-ISDN

TDM• Local and Remote Loopback

• Access to complete status information on local and remote device

• Excellent diagnostics and link performance statistics

• Extended Operating Temperature

• SFP port for CWDM, Bi-Di or standard SFPs

• Variety of clocking options

• T1 / E1 / J1 / DS3 / T3 / E3

MediaBand | x6210 | x6120 | x6110

Product Matrix

* For complete product details, please visit www.Transition.com/telco

Features

Carrier Ethernet Description Remote Management Advanced Timing Environmental

S4224Ethernet Access Switch: 24 x 100/1000Mbps SFP ports and 4 x 10Gbps ports.

Transition Networks Converge™ EMS, CLI, Web, SNMP, IEEE 802.3ah (Link OAM), IEEE 802.1ag (Ser-vice OAM) & ITU Y.1731 (Performance Monitoring)

IEEE 1588v2 and SyncE. In-cludes external IEEE1588v2 and SyncE clock inputs/outputs

0 C° - 50 C° Operating Temp Redundant, hot swappable AC and DC power supplies

S4212Ethernet Access Switch: 12 x 100/1000Mbps SFP ports and 2 x 10Gbps ports.

Transition Networks Converge™ EMS, CLI, Web, SNMP, IEEE 802.3ah (Link OAM), IEEE 802.1ag (Ser-vice OAM) & ITU Y.1731 (Performance Monitoring)

IEEE 1588v2 and SyncE. In-cludes external IEEE1588v2 and SyncE clock inputs/outputs

0 C° - 50 C° Operating Temp Redundant, hot swappable AC and DC power supplies

S4140Stand-Alone NID: 4 x 1Gbps/10G SFP+ ports

Transition Networks Converge™ EMS, CLI, Web, SNMP, IEEE 802.3ah (Link OAM), IEEE 802.1ag (Ser-vice OAM) & ITU Y.1731 (Performance Monitoring)

IEEE 1588v2 and SyncE. In-cludes external IEEE1588v2 and SyncE clock inputs/outputs

0 C° - 50 C° Operating Temp Redundant, hot swappable AC and DC power supplies

S3280 (-S & -TST)Stand-Alone NID: 4 x 10/100/1000Mbps copper ports and 4 x 100/1000Mbps SFP ports

Transition Networks Converge™ EMS, CLI, Web, SNMP, IEEE 802.3ah (Link OAM), IEEE 802.1ag (Ser-vice OAM) & ITU Y.1731 (Performance Monitoring)

IEEE 1588v2 and SyncE. Some models include external IEEE1588v2 and SyncE clock inputs/outputs

-25 C° - 65 C° Operating Temp Triple Power: 100-240 VAC with redundant +/- 18-57VDC

S3230 Stand-Alone NID: 1 x 10/100/1000Mbps copper port and up to 2 x 100/1000 SFP ports

CLI, Web, SNMP, IEEE 802.3ah (Link OAM), IEEE 802.1ag (Service OAM) & ITU Y.1731 (Performance Monitoring)

None 0 C° - 50 C° Operating Temp 100-240 VAC (DC power input avail-able with SPS-2460-xx)

S3220Stand-Alone NID: 1 x 10/100/1000Mbps copper port and up to 2 x 100/1000 SFP ports

CLI, Web, SNMP & IEEE 802.3ah (Link OAM) None 0 C° - 50 C° Operating Temp 100-240 VAC (DC power input avail-able with SPS-2460-xx)

S2220Stand-Alone NID: 1 x 10/100/1000Mbps copper port and 1 x 100 SFP ports

CLI, Web, SNMP & IEEE 802.3ah (Link OAM) None 0 C° - 50 C° Operating Temp 100-240 VAC (DC power input avail-able with SPS-2460-xx)

Ethernet Description Remote Management Advanced Timing Environmental

x2110Chassis or Stand-Alone layer 1 media converter: 1 x 100Mbps copper port and 1 x 100 Mbps fiber port

CLI, Web, SNMP and Transition Networks EMS *management available with management module

None0 C° - 50 C° Operating Temp AC and DC power options

x3110Chassis or Stand-Alone layer 1 media converter: 1 x 1000 Mbps copper port and 1 x 1000 Mbps fiber port

CLI, Web, SNMP and Transition Networks EMS *management available with management module

None0 C° - 50 C° Operating Temp AC and DC power options

x3210Chassis or Stand-Alone media converter: 1 x 10/100/1000Mbps copper port and 1 x 1000Mbps SFP

CLI, Web, SNMP and Transition Networks EMS *management available with management module

None0 C° - 50 C° Operating Temp AC and DC power options

TDM Description Remote Management Advanced Timing Environmental

MediaBandTDM Chassis or Stand-Alone NID: 1 – 32 T1/E1’s ports and 2 x 10/100/1000Mbps Ethernet ports + 1 x 100/1000 SFP port

Transition Networks EMSInternal Onboard Oscillator Clock from any TDM port Re-mote or Slave Clock

-20 C° - 55 C° Operating Temp 96 - 240VAC (DC Power Options Available) (Redundant Power Available AC/DC)

x6110TDM Chassis or Stand-Alone NID: 4 x T1/E1/J1 ports and 2 x 100Mbps SFP ports

CLI, Web, SNMP Transition Networks EMS Pass-through TDM: ANSI T1.102, T1.403, T1.408 ITU I.431, G.703, G.775, G.823

-10 C° - 65 C° Operating Temp 100 - 240VAC (DC available with SPS-2460-xx)

x6120TDM Chassis or Stand-Alone NID: 4 x T1/E1/J1 ports + 1 10/100Mbps Ethernet port and 2 x 100Mbps SFP ports

CLI, Web, SNMP Transition Networks EMS Pass-through TDM: ANSI T1.102, T1.403, T1.408 ITU I.431, G.703, G.775, G.823

-10 C° - 65 C° Operating Temp 100 - 240VAC (DC available with SPS-2460-xx)

PacketBand-TDM/ISDN

TDM over IP/Ethernet Chassis or Stand-Alone NID: Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP: 1 – 32 T1/E1’s ports and 2 x 10/100/1000Mbps Ethernet ports + 1 x 100/1000 SFP port

Transition Networks EMS

Internal Onboard Oscillator Clock from any TDM port Re-mote or Slave Clock Multicast Option ITU G.823 Synchroniza-tion levels

-20°C - 65°C Extended Temp Option -20 C° - 55 C° Operating Temp 96 - 240VAC (DC Power Options Available) (Redundant Power Available AC/DC)

WDM Description Remote Management Advanced Timing Environmental

CWDM4 - 16 channels available. CWDM multi-plexes multiple optical signals on a single fiber optic strand.

None None 0 C° - 70 C° Operating Temp

SFP Description Options

100BASE-X/OC-3 SFP Fast Ethernet CWDM 2km to 200km options Cisco and Juniper Compatible and MSA options

1000BASE-X SFP Gigabit Ethernet CWDM 220m to 160km options Cisco, HP and Juniper Compatible and MSA options

10G XFP 10 Gigabit Ethernet CWDM 33m to 100km options Cisco and MSA options

10G SFP+ 10 Gigabit Ethernet CWDM 33m to 80km options Cisco and HP Compatible and MSA options

Carrier EthernetTDM

Ethernet

SFPW

DM13 14