SPLIT FRAMES CLAMSHELLS

SPLIT FRAMES

CLAMSHELLS

ORORORORBITAL TUBE AND PIPE CUTTING AND BITAL TUBE AND PIPE CUTTING AND BITAL TUBE AND PIPE CUTTING AND BITAL TUBE AND PIPE CUTTING AND

BEVELLING MACHINESBEVELLING MACHINESBEVELLING MACHINESBEVELLING MACHINES TTTTTTTT----NGNGNGNG

ORBITAL TUBE AND PIPE ORBITAL TUBE AND PIPE ORBITAL TUBE AND PIPE ORBITAL TUBE AND PIPE

CUTTING AND BEVELLING CUTTING AND BEVELLING CUTTING AND BEVELLING CUTTING AND BEVELLING

MACHINESMACHINESMACHINESMACHINES

LIGHT WEIGHT LIGHT WEIGHT LIGHT WEIGHT LIGHT WEIGHT –––– VERSATILE VERSATILE VERSATILE VERSATILE –––– RELIABILITY RELIABILITY RELIABILITY RELIABILITY –––– SAFE USE UNDER ALL SAFE USE UNDER ALL SAFE USE UNDER ALL SAFE USE UNDER ALL

CCCCONDITIONS ONDITIONS ONDITIONS ONDITIONS ---- TO SEVER AND TO BEV TO SEVER AND TO BEV TO SEVER AND TO BEV TO SEVER AND TO BEVELELELEL

The Protem TTThe Protem TTThe Protem TTThe Protem TT----NG series feature a very robust design, eNG series feature a very robust design, eNG series feature a very robust design, eNG series feature a very robust design, easy to asy to asy to asy to handle, the most reliable, the most powerful machine in the world! handle, the most reliable, the most powerful machine in the world! handle, the most reliable, the most powerful machine in the world! handle, the most reliable, the most powerful machine in the world!

PORTABLE PIPE

SEVERING!

The tube cutting machines of the TT-NG-

series are accurate in cutting and/or

bevelling tubes and pipes of all schedules

individually or in one simultaneous

operation. These machines are especially

designed to machine heavy wall tubes and

pipes. They are very robust and can be

used in various positions.

Counter boring jobs and cutting with

wheels is also possible. The wide range of

diameters covered by each model TT-NG

features an additional advantage.

Their split frame configuration allows their

opening in 2 half-shells. For the manual

clamping, 4 independent adjustable jaws

are used. The machines have a rear

centring feature and completely enclosed

drive gears for the operators’ safety.

SSPPLLIITT FFRRAAMMEESS CCLLAAMMSSHHEELLLLSS TTTT--NNGG

BEVELBEVELBEVELBEVELLLLLING AND WELD END ING AND WELD END ING AND WELD END ING AND WELD END

PREP EQUIPMENTPREP EQUIPMENTPREP EQUIPMENTPREP EQUIPMENT

WE DELIVER

UNMATCHED

SOLUTIONS!


The TT-NG can be equipped with ovality

copying carriages enabling to correct the

defaults of ovality of tubes and pipes. They

can also be remotely controlled for operations

in areas under ionizing radiations or under

water/subsea operations.

Several configurations of tool holders are

available including wheel holders enabling for

example the replacement of steam generators

36”, 90 mm wall thickness with severing tools

and to cut the remaining 10 mm with wheels

in order to reduce the production of chips and

thus contamination.)

Machining and clamping capacity:Machining and clamping capacity:Machining and clamping capacity:Machining and clamping capacity:

60. 3 mm OD – 2235.2 mm OD

2” – 88” OD

> 2235.2 mm (88”) on request

Clamping:Clamping:Clamping:Clamping:

Manual with key

BeBeBeBevel forms:vel forms:vel forms:vel forms:

Facing, 30 and 37°30 bevel, J-bevel,

compound bevel, others on request

Feed:Feed:Feed:Feed:

Automatic with clutch

Motorisation:Motorisation:Motorisation:Motorisation:

Pneumatic or hydraulic

Electric drives on request

Machine is delivered with: Machine is delivered with: Machine is delivered with: Machine is delivered with:

�� 2 tool holder

�� 1 pointed cutting tool bit

�� 1 severing cutting tool bit

�� Key, screws

�� Operating manual

NO HEAT

AFFECTED ZONE!

ORBITAL TUBE AND PIPE ORBITAL TUBE AND PIPE ORBITAL TUBE AND PIPE ORBITAL TUBE AND PIPE

CUTTING AND BEVELLING CUTTING AND BEVELLING CUTTING AND BEVELLING CUTTING AND BEVELLING

MACHINES MACHINES MACHINES MACHINES


* * * * The weights as indicated incluThe weights as indicated incluThe weights as indicated incluThe weights as indicated include the machine completely equipped with its tool holders and drive (s)de the machine completely equipped with its tool holders and drive (s)de the machine completely equipped with its tool holders and drive (s)de the machine completely equipped with its tool holders and drive (s). . . .

Orbital tube cutting machiOrbital tube cutting machiOrbital tube cutting machiOrbital tube cutting machines for diameters larger than 88nes for diameters larger than 88nes for diameters larger than 88nes for diameters larger than 88" on request." on request." on request." on request.

Model TTNGModel TTNGModel TTNGModel TTNG MachiningMachiningMachiningMachining capacitycapacitycapacitycapacity

in mmin mmin mmin mm

MachiningMachiningMachiningMachining capacitycapacitycapacitycapacity

in inchin inchin inchin inch

ØAØAØAØA

mmmmmmmm

ØBØBØBØB

mmmmmmmm

CCCC

mmmmmmmm

ØDØDØDØD

mmmmmmmm

EEEE

mmmmmmmm

FFFF

mmmmmmmm

GGGG

mmmmmmmm

HHHH

mmmmmmmm

JJJJ

mmmmmmmm WeigWeigWeigWeighthththt

114114114114 Ø 26.7 – Ø 114.3 ¾'' – 4'' 121 271 190 400 108.6 202.6 66 189 377 38

168168168168 Ø 60.3 – Ø 168.3 2'' - 6'' 175 325 217 460 108,6 202.6 66 216 407 44

219219219219 Ø 114.3 – Ø 219.1 4'' - 8'' 223 373 241 508 108,6 202.6 66 240 431 51

273273273273 Ø 168.3 – Ø 273.1 6'' - 10'' 283 433 271 570 108,6 202.6 66 270 462 56

323323323323 Ø 219.1 – Ø 323.9 8'' - 12'' 331 481 295 619 108.6 202.6 66 294 486 60

406406406406 Ø 273.1 – Ø 406.4 10'' - 16'' 415 565 337 688 108,6 202.6 66 336 521 74

508508508508 Ø 323.9 – Ø 508.0 12'' - 20'' 517 667 388 790 108,6 202.6 66 387 572 86

610610610610 Ø 406.4 – Ø 610.0 16'' - 24'' 619 788 449 895 108,6 202.6 66 473,5 624 96

762762762762 Ø 558.8 – Ø 762.0 22'' - 30'' 775 944 526 1200 108.6 202.6 66 551,5 776 123

900900900900 Ø 660.4 – Ø 914.4 26" - 36" 926 1146 622 1354 108,6 202.6 66 652,5 854 196

1016101610161016 Ø 812.8 – Ø 1016.0 32" - 42" 1040 1260 684 1458 108,6 202.6 66 709,5 906 240

1200120012001200 Ø 914.4 – Ø 1219.2 36'' - 48'' 1262 1540 826 1676 120.6 228 128 857 1015 350

1400140014001400 Ø 1120.0 - Ø 1420.0 44'' - 56'' 1460 1730 910 1874 118.1 213 170 945 1114 410

1111600600600600 Ø 1320.8 - Ø 1625.6 52'' - 64'' - - - - - - - - - -

1800180018001800 Ø 1524 – Ø 1828.8 60'' - 72'' - - - - - - - - - -

2000200020002000 Ø 1727.2 - Ø 2032 68“ - 80“ - - - - - - - - - -

2200220022002200 Ø 1930.4 - Ø 2235.2 76“ - 88“ - - - - - - - - - -

TECHNICAL DATA

Developed in collaboration with the users, tested and approved by 100 % of themDeveloped in collaboration with the users, tested and approved by 100 % of themDeveloped in collaboration with the users, tested and approved by 100 % of themDeveloped in collaboration with the users, tested and approved by 100 % of them


PROTEM SASPROTEM SASPROTEM SASPROTEM SAS | Phone: +33 (0) 4 75 57 41 41 | Fax: +33 (0) 4 75 57 41 49 | [email protected] | www.protem.fr

PROTEM GmbHPROTEM GmbHPROTEM GmbHPROTEM GmbH | Phone: +49 (0) 7247 9393 – 0 | Fax: +49 (0) 7247 9393 - 33 | [email protected]

TTTTTTTT----KSKSKSKS

Copying carriage

Stroke 50 (1,9“), 100 (3,9“), above 100 mm (3,9“) mm on

request

TTTTTTTT----DELDELDELDEL

Counter boring carriage

Stroke 50 (1,9“), 100 (3,9“), above 100 mm (3,9“) on

request

TTTTTTTT----ODTODTODTODT

OD Tracker for TT219-610

OD Tracker for TT762

OD Tracker for TT900-1000

TTTTTTTT----SRHSRHSRHSRH Cutting roll holder for TT-Machines

FFFF----LubLubLubLub----0,50,50,50,5----LLLL Oil for lubricating filters bottle 0,5 liter

FFFF----LubLubLubLub----1111----LLLL Oil for lubricating filters bottle 1 liter

FFFF----LubLubLubLub----5555----LLLL Oil for lubricating filters bottle 5 liter

HYHYHYHY----HPP 050HPP 050HPP 050HPP 050 Hydraulic Power Pack ( 5,5 kW)

FRL300FRL300FRL300FRL300

Maintenance unit for pneumatically operated machines

with dual motor pack

KIT02KIT02KIT02KIT02

Flexible tubing set for pneumatically operated machines

OPTOPTOPTOPT----RPRPRPRP Regulation Valve

OPTOPTOPTOPT----SPHSPHSPHSPH Chip Hook

Other options on requestOther options on requestOther options on requestOther options on request

TECHNICAL DATA





Order no.Order no.Order no.Order no. Article Article Article Article

OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----PLPLPLPL OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----PL sevePL sevePL sevePL severing tool bit, max. wall thickness 35 mmring tool bit, max. wall thickness 35 mmring tool bit, max. wall thickness 35 mmring tool bit, max. wall thickness 35 mm

OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----FFFF----PLPLPLPL OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----FFFF----PL severing tool bit, max. wall thickness 35 mmPL severing tool bit, max. wall thickness 35 mmPL severing tool bit, max. wall thickness 35 mmPL severing tool bit, max. wall thickness 35 mm

OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----PTPTPTPT OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----PT pointed tool bit, max. wall thickness 35 mmPT pointed tool bit, max. wall thickness 35 mmPT pointed tool bit, max. wall thickness 35 mmPT pointed tool bit, max. wall thickness 35 mm

OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----FFFF----PTPTPTPT OOOO----TTNTTNTTNTTN----TT1TT1TT1TT1----5555----HHHH----FFFF----PT pointed tool PT pointed tool PT pointed tool PT pointed tool bit, max. wall thickness 35 mmbit, max. wall thickness 35 mmbit, max. wall thickness 35 mmbit, max. wall thickness 35 mm

OOOO----TTNTTNTTNTTN----TT2TT2TT2TT2----12121212----HHHH----2222 OOOO----TTNTTNTTNTTN----TT2TT2TT2TT2----12121212----HHHH----2 bevelling tool bit 30°, wall thickness 27 mm2 bevelling tool bit 30°, wall thickness 27 mm2 bevelling tool bit 30°, wall thickness 27 mm2 bevelling tool bit 30°, wall thickness 27 mm

OOOO----TTNTTNTTNTTN----TT2TT2TT2TT2----12121212----HHHH----FFFF----2222 OOOO----TTNTTNTTNTTN----TT2TT2TT2TT2----12121212----HHHH----FFFF----2 bevelling tool bit 30°2 bevelling tool bit 30°2 bevelling tool bit 30°2 bevelling tool bit 30°

OOOO----TTNTTNTTNTTN----TT3TT3TT3TT3----12121212----HHHH----3333 OOOO----TTNTTNTTNTTN----TT3TT3TT3TT3----12121212----HHHH----3 bevelling tool bit 37°30, wall thickness 20 mm3 bevelling tool bit 37°30, wall thickness 20 mm3 bevelling tool bit 37°30, wall thickness 20 mm3 bevelling tool bit 37°30, wall thickness 20 mm

OOOO----TTNTTNTTNTTN----TT3TT3TT3TT3----12121212----HHHH----FFFF----3333 OOOO----TTNTTNTTNTTN----TT3TT3TT3TT3----12121212----HHHH----FFFF----3 bevelling tool bit 37°30, wall thickness 20 mm3 bevelling tool bit 37°30, wall thickness 20 mm3 bevelling tool bit 37°30, wall thickness 20 mm3 bevelling tool bit 37°30, wall thickness 20 mm

OOOO----TTNTTNTTNTTN----TT4TT4TT4TT4----12121212----HHHH----4444 OOOO----TTNTTNTTNTTN----TT4TT4TT4TT4----12121212----HHHH----4 bevelling tool bit 45°4 bevelling tool bit 45°4 bevelling tool bit 45°4 bevelling tool bit 45°

OOOO----TTNTTNTTNTTN----TT5TT5TT5TT5----12121212----HHHH----5555 OOOO----TTNTTNTTNTTN----TT5TT5TT5TT5----12121212----HHHH----5 bevelling tool bit 30°, reversed5 bevelling tool bit 30°, reversed5 bevelling tool bit 30°, reversed5 bevelling tool bit 30°, reversed

OOOO----TTNTTNTTNTTN----TT6TT6TT6TT6----12121212----HHHH----6666 OOOO----TTNTTNTTNTTN----TT6TT6TT6TT6----12121212----HHHH----6 bevelling 6 bevelling 6 bevelling 6 bevelling tool bit 37°30, reversedtool bit 37°30, reversedtool bit 37°30, reversedtool bit 37°30, reversed

OOOO----TTNTTNTTNTTN----TT7TT7TT7TT7----25252525----HHHH----7777 OOOO----TTNTTNTTNTTN----TT7TT7TT7TT7----25252525----HHHH----7 bevelling tool bit 30°, wall thickness 35 mm7 bevelling tool bit 30°, wall thickness 35 mm7 bevelling tool bit 30°, wall thickness 35 mm7 bevelling tool bit 30°, wall thickness 35 mm


OOOO----TTNTTNTTNTTN----TT9TT9TT9TT9----25252525----HHHH----9999 OOOO----TTNTTNTTNTTN----TT9TT9TT9TT9----25252525----HHHH----9 bevelling tool bit for double beve9 bevelling tool bit for double beve9 bevelling tool bit for double beve9 bevelling tool bit for double bevellll

OOOO----TTNTTNTTNTTN----TT9ITT9ITT9ITT9I----25252525----HHHH----9999 OOOO----TTNTTNTTNTTN----TT9ITT9ITT9ITT9I----25252525----HHHH----9 30° reversed bevelling tool bit for double bevel9 30° reversed bevelling tool bit for double bevel9 30° reversed bevelling tool bit for double bevel9 30° reversed bevelling tool bit for double bevel

OOOO----TTNTTNTTNTTN----TT10TT10TT10TT10----12121212----HHHH----10101010 OOOO----TTNTTNTTNTTN----TT10TT10TT10TT10----12121212----HHHH----10 bevelling tool bit 37°30, double bevel, wall thickness 18 mm10 bevelling tool bit 37°30, double bevel, wall thickness 18 mm10 bevelling tool bit 37°30, double bevel, wall thickness 18 mm10 bevelling tool bit 37°30, double bevel, wall thickness 18 mm

OOOO----TTNTTNTTNTTN----TT10ITT10ITT10ITT10I----12121212----HHHH----10101010 OOOO----TTNTTNTTNTTN----TT10ITT10ITT10ITT10I----12121212----HHHH----10 bevelling tool bit 37°30, d10 bevelling tool bit 37°30, d10 bevelling tool bit 37°30, d10 bevelling tool bit 37°30, double bevel, wall thickness 18 mm, reversedouble bevel, wall thickness 18 mm, reversedouble bevel, wall thickness 18 mm, reversedouble bevel, wall thickness 18 mm, reversed

OOOO----TTNTTNTTNTTN----TT11TT11TT11TT11----5555----HHHH----PLPLPLPL OOOO----TTNTTNTTNTTN----TT11TT11TT11TT11----5555----HHHH----PL severing tool bit, max. wall thickness 90 mmPL severing tool bit, max. wall thickness 90 mmPL severing tool bit, max. wall thickness 90 mmPL severing tool bit, max. wall thickness 90 mm

OOOO----TTNTTNTTNTTN----TT11TT11TT11TT11----5555----HHHH----PTPTPTPT OOOO----TTNTTNTTNTTN----TT11TT11TT11TT11----5555----HHHH----PT pointed tool bit, max. wall thickness 90 mmPT pointed tool bit, max. wall thickness 90 mmPT pointed tool bit, max. wall thickness 90 mmPT pointed tool bit, max. wall thickness 90 mm

OOOO----TTNTTNTTNTTN----TT12TT12TT12TT12----25252525----HHHH----12121212 OOOO----TTNTTNTTNTTN----TT12TT12TT12TT12----25252525----HHHH----12 30° bevell12 30° bevell12 30° bevell12 30° bevelling tool bit for double bevel, wall thickness 46 mming tool bit for double bevel, wall thickness 46 mming tool bit for double bevel, wall thickness 46 mming tool bit for double bevel, wall thickness 46 mm

OOOO----TTNTTNTTNTTN----TT12ITT12ITT12ITT12I----25252525----HHHH----12121212 OOOO----TTNTTNTTNTTN----TT12ITT12ITT12ITT12I----25252525----HHHH----12 30° bevelling tool bit for double bevel, wall thickness 46 mm, reversed12 30° bevelling tool bit for double bevel, wall thickness 46 mm, reversed12 30° bevelling tool bit for double bevel, wall thickness 46 mm, reversed12 30° bevelling tool bit for double bevel, wall thickness 46 mm, reversed

OOOO----TTNTTNTTNTTN----TT13TT13TT13TT13----25252525----HHHH----13131313 OOOO----TTNTTNTTNTTN----TT13TT13TT13TT13----25252525----HHHH----13 30° bevelling tool bit for double bevel, wall thickn13 30° bevelling tool bit for double bevel, wall thickn13 30° bevelling tool bit for double bevel, wall thickn13 30° bevelling tool bit for double bevel, wall thickness 39 mmess 39 mmess 39 mmess 39 mm



OOOO----TTNTTNTTNTTN----TT14ITT14ITT14ITT14I----25252525----HHHH----14141414 OOOO----TTNTTNTTNTTN----TT14ITT14ITT14ITT14I----25252525----HHHH----14 bevell14 bevell14 bevell14 bevelling tool bit 37°30, wall thickness 50 mm, reverseding tool bit 37°30, wall thickness 50 mm, reverseding tool bit 37°30, wall thickness 50 mm, reverseding tool bit 37°30, wall thickness 50 mm, reversed

OOOO----TTNTT15TTNTT15TTNTT15TTNTT15----8888----HHHH----PLPLPLPL OOOO----TTNTT15TTNTT15TTNTT15TTNTT15----8888----HHHH----PL severing tool bit, max. wall thickness 90 mm, width 30 mmPL severing tool bit, max. wall thickness 90 mm, width 30 mmPL severing tool bit, max. wall thickness 90 mm, width 30 mmPL severing tool bit, max. wall thickness 90 mm, width 30 mm

OOOO----TTNTTNTTNTTN----TT15TT15TT15TT15----8888----HHHH----PTPTPTPT OOOO----TTNTTNTTNTTN----TT15TT15TT15TT15----8888----HHHH----PT pointed tool bit, max. wall thickness 90 mm, width 30 mmPT pointed tool bit, max. wall thickness 90 mm, width 30 mmPT pointed tool bit, max. wall thickness 90 mm, width 30 mmPT pointed tool bit, max. wall thickness 90 mm, width 30 mm

OOOO----TTNTTNTTNTTN----TT16TT16TT16TT16----8888----HHHH----PLPLPLPL OOOO----TTNTTNTTNTTN----TT16TT16TT16TT16----8888----HHHH----PL severing tool bit, max. wall thickness 90 mm, height 8 mmPL severing tool bit, max. wall thickness 90 mm, height 8 mmPL severing tool bit, max. wall thickness 90 mm, height 8 mmPL severing tool bit, max. wall thickness 90 mm, height 8 mm

OOOO----TTNTTNTTNTTN----TT16TT16TT16TT16----8888----HHHH----PTPTPTPT OOOO----TTNTTNTTNTTN----TT16TT16TT16TT16----8888----HHHH----PT pointed tool bit, max. wall thickness 90 mm, width 8 mmPT pointed tool bit, max. wall thickness 90 mm, width 8 mmPT pointed tool bit, max. wall thickness 90 mm, width 8 mmPT pointed tool bit, max. wall thickness 90 mm, width 8 mm

OOOO----TTNTTNTTNTTN----TT17TT17TT17TT17----25252525----HHHH----17171717 OOOO----TTNTTNTTNTTN----TT17TT17TT17TT17----25252525----HHHH----17 37°30 / 10° bevelling tool bit for compound bev17 37°30 / 10° bevelling tool bit for compound bev17 37°30 / 10° bevelling tool bit for compound bev17 37°30 / 10° bevelling tool bit for compound bevelelelel

OOOO----TTNTTNTTNTTN----TT17ITT17ITT17ITT17I----25252525----HHHH----17171717 OOOO----TTNTTNTTNTTN----TT17ITT17ITT17ITT17I----25252525----HHHH----17 37°30 / 10° bevelling tool bit for compound bevel, reversed17 37°30 / 10° bevelling tool bit for compound bevel, reversed17 37°30 / 10° bevelling tool bit for compound bevel, reversed17 37°30 / 10° bevelling tool bit for compound bevel, reversed

TECHNICAL DATA


PROTEMPROTEMPROTEMPROTEM GmbH GmbH GmbH GmbH | Phone: +49 (0) 7247 9393 – 0 | Fax: +49 (0) 7247 9393 - 33 | [email protected]



OOOO----TTNTTNTTNTTN----TT18TT18TT18TT18----25252525----HHHH----18181818 OOOO----TTNTTNTTNTTN----TT18TT18TT18TT18----25252525----HHHH----18 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 45 mm18 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 45 mm18 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 45 mm18 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 45 mm

OOOO----TTNTTNTTNTTN----TT18ITT18ITT18ITT18I----25252525----HHHH----18181818 OOOO----TTNTTNTTNTTN----TT18ITT18ITT18ITT18I----25252525----HHHH----18 37°30 / 10° bevelling tool bit for compound bevel, reversed18 37°30 / 10° bevelling tool bit for compound bevel, reversed18 37°30 / 10° bevelling tool bit for compound bevel, reversed18 37°30 / 10° bevelling tool bit for compound bevel, reversed

OOOO----TTNTTNTTNTTN----TT19TT19TT19TT19----25252525----HHHH----19191919 OOOO----TTNTTNTTNTTN----TT19TT19TT19TT19----25252525----HHHH----19 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 50 mm19 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 50 mm19 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 50 mm19 37°30 / 10° bevelling tool bit for compound bevel, wall thickness 50 mm

OOOO----TTNTTNTTNTTN----TT19ITT19ITT19ITT19I----25252525----HHHH----19191919 OOOO----TTNTTNTTNTTN----TT19ITT19ITT19ITT19I----25252525----HHHH----19 37°30 / 10° bevelli19 37°30 / 10° bevelli19 37°30 / 10° bevelli19 37°30 / 10° bevelling tool bit for compound bevel, reversedng tool bit for compound bevel, reversedng tool bit for compound bevel, reversedng tool bit for compound bevel, reversed

OOOO----TTNTTNTTNTTN----TT20TT20TT20TT20----25252525----HHHH----20202020 OOOO----TTNTTNTTNTTN----TT20TT20TT20TT20----25252525----HHHH----20 30° / 10° bevelling tool bit for compound bevel, wall thickness 35 mm20 30° / 10° bevelling tool bit for compound bevel, wall thickness 35 mm20 30° / 10° bevelling tool bit for compound bevel, wall thickness 35 mm20 30° / 10° bevelling tool bit for compound bevel, wall thickness 35 mm

OOOO----TTNTTNTTNTTN----TT20ITT20ITT20ITT20I----25252525----HHHH----20202020 OOOO----TTNTTNTTNTTN----TT20ITT20ITT20ITT20I----25252525----HHHH----20 30° / 10° bevelling tool bit for compound bevel, reversed20 30° / 10° bevelling tool bit for compound bevel, reversed20 30° / 10° bevelling tool bit for compound bevel, reversed20 30° / 10° bevelling tool bit for compound bevel, reversed

OOOO----TTNTTNTTNTTN----TT21TT21TT21TT21----25252525----HHHH----21212121 OOOO----TTNTTNTTNTTN----TT21TT21TT21TT21----25252525----HHHH----21 30° / 10° bevelling tool bit for compound bevel, wall thickness 45 mm21 30° / 10° bevelling tool bit for compound bevel, wall thickness 45 mm21 30° / 10° bevelling tool bit for compound bevel, wall thickness 45 mm21 30° / 10° bevelling tool bit for compound bevel, wall thickness 45 mm


OOOO----TTNTTNTTNTTN----TT22TT22TT22TT22----25252525----HHHH----22222222 OOOO----TTNTTNTTNTTN----TT22TT22TT22TT22----25252525----HHHH----22 30° / 10° bevell22 30° / 10° bevell22 30° / 10° bevell22 30° / 10° bevelling tool bit for compound bevel, wall thickness 50 mming tool bit for compound bevel, wall thickness 50 mming tool bit for compound bevel, wall thickness 50 mming tool bit for compound bevel, wall thickness 50 mm


OOOO----TTNTTNTTNTTN----TT23TT23TT23TT23----25252525----HHHH----23232323 OOOO----TTNTTNTTNTTN----TT23TT23TT23TT23----25252525----HHHH----23 30° bevelling tool bit for double bevel, wall thickness 50 mm23 30° bevelling tool bit for double bevel, wall thickness 50 mm23 30° bevelling tool bit for double bevel, wall thickness 50 mm23 30° bevelling tool bit for double bevel, wall thickness 50 mm


OOOO----TTNTTNTTNTTN----TT24TT24TT24TT24----12121212----HHHH----24242424 OOOO----TTNTTNTTNTTN----TT24TT24TT24TT24----12121212----HHHH----24 30° bevelling tool bit for double bevel, wall thickness 22 mm24 30° bevelling tool bit for double bevel, wall thickness 22 mm24 30° bevelling tool bit for double bevel, wall thickness 22 mm24 30° bevelling tool bit for double bevel, wall thickness 22 mm

OOOO----TTNTTNTTNTTN----TT24ITT24ITT24ITT24I----12121212----HHHH----24242424 OOOO----TTNTTNTTNTTN----TT24ITT24ITT24ITT24I----12121212----HHHH----24 30°24 30°24 30°24 30° bevelling tool bit for double bevel, wall thickness 22 mm, reversed bevelling tool bit for double bevel, wall thickness 22 mm, reversed bevelling tool bit for double bevel, wall thickness 22 mm, reversed bevelling tool bit for double bevel, wall thickness 22 mm, reversed

TECHNICAL DATA





CONTACT & COMMENTS

Our commitment! Your satisfaction!

Serving our customers around the world with competence, efficiency and a reliable service is our

main target. Whatever your questions, do not hesitate to consult us. Our staff will be always advise

you in a professional manner the right equipment that will meet your technical requirements

Call or email us for more informationCall or email us for more informationCall or email us for more informationCall or email us for more information

PROTEM GmbHPROTEM GmbHPROTEM GmbHPROTEM GmbH

Am Hambiegel 27

76706 Dettenheim

Phone: +49 (0) 7247 9393 – 0

Fax: +49 (0) 7247 9393 - 33

[email protected]

www.protem-gmbh.de

PROTEM SASPROTEM SASPROTEM SASPROTEM SAS

Z.I. Les Bosses

26800 Etoile-sur-Rhone

Phone: +33 (0) 4 75 57 41 41

Fax: +33 (0) 4 75 57 41 49

[email protected]

www.protem.fr

Comments:


Documents

SPLIT FRAMES CLAMSHELLS