SPECIFICATIONS:Weight: Frame: 3.96g, total weight with FPV Camera mount: 4.7gMaterials: Plastic.Size: 65mm.Maximum propeller: 31 mm.Motor mount: 6x15 mm.Flight controller mount: 29mm x 29mm.

SPIDER 65 FPV RACER - USER MANUAL

REV. 01-Date:12/16/2016 1/6HELI INNOVATIONS

Fly Direction REF

Spider 65-Main Frame Pre-Assembly with Shourd and FC Mount

SPIDER 65 FPV RACER - USER MANUAL

2/6REV. 01-DATE:12/16/2016

4 x Motor Mount

PACKAGE LIST PART

4 x M1x3 PANS Head Screw Silver

4 x Washer ∅4x∅1x0.5

15 FPV Camera Mount PTU-Black

2 x O-Ring ID 12 - W 1

HELI INNOVATIONS

4 x Motor 6x15 mm(18500/19000 KV suggest)

Motor Wire

Note: Rotate Motor in order Electric Wire will follow the arrow, as showen

Fly Direction REF Bottom View

Note 1: Pay attention Motor Wire position to avoid short circuit or pinching

SPIDER 65 FPV RACER - USER MANUAL

3/6REV. 01-DATE:12/16/2016

Step 01: Motor Assembly Step 02: Motor Mount Assembly

Note 2: Carefully press fit all 16 Motor Mount pins into Frame sockets

HELI INNOVATIONS

4 x M1x3 PANS Head Screw Self Tapping

Camera Mount

4 x Washer ∅4x∅1x0.5

Flight Control (Furious FPV Acrowhoop V2 suggest)(Assembly FC following Fly direction REF)

FLY DIRECTION REF

FRONT

(Extra information for FPV Camera Mount PTU, see page number 6)

SPIDER 65 FPV RACER - USER MANUAL

4/6REV. 01-DATE:12/16/2016

Step 03: Flight Control Assembly

BACK After assembly FC with Frame, connect Motor with FC. Note: Assembly Motor Wire following below picture

Motor Wire

HELI INNOVATIONS

BOTTOM VIEW

2 x Oring 12x12 x Oring 12x1

Battery

2 x CW propeller

2 x CCW propeller2 x CCW propeller

2 x CW propeller

Fly Direction

Step 05: Propeller AssemblyStep 04: O-Ring Battery Support Assembly

REV. 01-DATE:12/16/2016 5/6

SPIDER 65 FPV RACER - USER MANUAL

Note rotation direction of the Propeller

FRONT

BACKBACKFRONT

Fly Direction

HELI INNOVATIONS

HELI INNOVATIONS

Roll Bar into Camera Mount socket (as showen)

REV. 01-DATE:12/16/2016

Step 01: Insert Camera into Camera Mount Step 02: Insert Roll Bar into Step 01, press fit

6/6

SPIDER 65 - FPV Camera Mount PTU - Manual

Roll bar

Note: Slot face lens

Camera Mount

Camera

Insert the Roll Bar Pins into Camera Mount sockets and press fit carefully