11/16/2017

SPEC.# REV. PROCESS SPECIFICATION DEPARTURES

BAEMM-001 A BOMBARDIER AEROSPACE ENGINEERING MATERIAL MANUAL

BAEPM-001 G BOMBARDIER AEROSPACE ENGINEERING PROCESS MANUAL

BAPS 138-043 F APPLICATION OF FLUID RESISTANT (FR) PRIMER

BAPS138-044 D APPLICATION OF FLUID RESISTANT (FR) ENAMELS

BAPS138-049 A APPLICATION OF BMS565-013 HEAT RESISTANT COATING

BAPS 138-054 C APPLICATION OF FLUID RESISTANT (FR) POLYURETHANE TOUCH-UP COATING

BAPS144-005 D IDENTIFICATION OF AIRCRFT PARTS AND ASSEMBLIES

BAPS149-001 A REPAIR OF SURFACE SCRATCHES ON ALUMINUM SKINS

BAPS150-000 B INSTALLATION OF NUTS, BOLTS, SCREWS AND STUDS

BAPS150-002 B TORQUING OF NUTS, BOLTS, SCREWS AND STUDS

BAPS150-003 B INSTALLATION OF SAFETYING DEVICES

BAPS151-001 B INSTALLATION OF CONVENTIONAL RIVETS

BAPS151-010 NC INSTALLATION OF MECHANICALLY EXPANDING BLIND RIVETS

BAPS151-029 F INSTALLATION OF LIGHTWEIGHT THREADED HEX-DRIVE FASTENERS, HI-LITE & AERO-LITE TYPES

BAPS152-003 NC PROTECTIVE PACKAGING OF MACHINED PARTS

BAPS152-009 NC TEMPORARY PROTECTION OF ALUMINUM ALLOY RAW MATERIAL, PARTS AND ASSEMBLIES

BAPS155-067 A CEMENTING WITH POLYSULFIDE SEALANT

BAPS155-117 NC CEMENTING BONDED HARDWARE

BAPS157-028 H PRESSURE AND ENVIRONMENTAL SEALING

BAPS157-040 NC APPLICATION OF CORROSION INHIBITING JOINTING COMPOUND

BAPS160-010 D CHROMIC ACID ANODIZING

BAPS160-020 C CHEMICAL CONVERSION TREATMENT FOR ALUMINUM ALLOYSNOTE: ITEMS IN RED INDICATE A CHANGE SINCE THE PREVIOUS REVISION OF THIS LIST

Page 1 of 3

11/16/2017

SPEC.# REV. PROCESS SPECIFICATION DEPARTURES

BAPS160-032 C SULFURIC ACID ANODIZING

BAPS168-007 H HEAT TREATMENT OF ALUMINUM ALLOYS

BAPS168-013 D HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS

BAPS168-015 B STRESS RELIEF OF METALS

BAPS168-019 B CARBURIZING OF STEEL

BAPS168-30 B HEAT TREATMENT OF CORROSION RESISTANT STEEL

BAPS175-004 A INSTALLATION AND RETENTION OF SELF ALIGNING GROOVE BEARING BY ROLLER OR ANVIL SWAGING

BAPS175-005 NC INSTALLATION OF INTERFERENCE FIT BUSHINGS

BAPS176-002 D FLUORESCENT PENETRANT INSPECTION

BAPS176-004 A MAGNETIC PARTICLE INSPECTION

BAPS180-008 B DRY ABRASIVE BLASTING

BAPS180-009 C MANUAL SOLVENT CLEANING

BAPS180-015 B PASSIVATION OF CORROSION RESISTANT STEEL

BAPS180-030 A ALKALINE ETCHING OF ALUMINUM ALLOYS

BAPS180-031 NC CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS

BAPS180-032 A ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS

BAPS188-000 E STANDARD FABRICATION DETAILS

BAPS188-001 B STANDARD MACHINING PRACTICES FOR METALLIC PARTS

BA670/690-001 B FINISH REQUIREMENTS FOR CRJ700/900 AIRCRAFT

BAMS514-001 A 7050-T74 ALUNINUM ALLOY HAND FORGINGS

BAMS514-003 NC 6AL-6V-2SN TITANIUM ALLOY DIE FORGINGS

BAMS516-007 C MARKING INKSNOTE: ITEMS IN RED INDICATE A CHANGE SINCE THE PREVIOUS REVISION OF THIS LIST

Page 2 of 3

11/16/2017

SPEC.# REV. PROCESS SPECIFICATION DEPARTURES

BAMS552-010 NC NON-CHROMATED CORROSION INHIBITING JOINTING COMPOUND

BAMS565-001 D FLUID RESISTANT (FR) EPOXY PRIMER FOR AIRCRAFT INTERIOR AND EXTERIOR SKIN SURFACES

BAMS565-002 B FLUID RESISTANT (FR) ENAMEL COATING FOR AIRCRAFT INTERIOR

BAMS565-006 A ORGANIC CORROSION-INHIBITING COMPOUNDS

BAMS569-001 B LUBRICANTS AND COOLANTS

BATS5745 A EVALUATION OF LUBRICANTS AND COOLANTS

GEN-004 J PROTECTIVE FINISH CODES

GEN-008 B FORGINGS FOR AIRCRAFT APPLICATIONS

GEN-031 C BOMBARDIER AEROSPACE LIST OF BANNED AND RESTRICTED SUBSTANCES

NOTE: ITEMS IN RED INDICATE A CHANGE SINCE THE PREVIOUS REVISION OF THIS LIST

Page 3 of 3