SP2006 CSE598A/EE597G CAD Tool Tutorial Spring 2006 CSE598A / EE597G Analog-Digital Mixed-Signal CMOS Chip Design

SP2006 CSE598A/EE597G

CAD Tool Tutorial

Spring 2006 CSE598A / EE597G

Analog-Digital Mixed-Signal CMOS Chip Design


NCSU CDK Environment Setup

Make your own Cadence project directory

> mkdir ~userid/AMIS05

Copy setup files

• copy ‘copy’ file from ‘~chip/cadence/local/cdssetup’ to your project directory

> cp ~chip/cadence/local/cdssetup/copy .

• run ‘copy’The setup files of NCXU CDK will be automatically copied to your project directory

> copy


Running NCSU CDK

Source ‘cadence_env’ and execute ‘icfb’

> source cadence_env

> icfb & This will bring up a ‘CIW’ (Command Interpreter Windo

w) and a ‘Library Manager’

Library Manager

CIW


Creating a New Design

Create a new library in the Library Manager

• File → New → Library…



In a ‘Create Library’ window

• give a library name and a path where you want to create your library directory

ex) Name: CSE598A Path: ~userid/AMIS05

• choose ‘Attach to existing tech library’ for ‘Technology Library’and select‘AMI 0.60u C5N(3M, 2P, high-res)’

• click ‘OK’



Now you have ‘CSE598A’ in a Library list Create a ‘Cell View’ in your library

• left click on your library ‘CSE598A’ in ‘Library Manager’

• File → New → Cell View…

• in ‘Create New File’ windowput your ‘Cell Name’and select‘Composer - Schematic’for ‘Tool’

• click ‘OK’



Differential amplifier design

• this is the schematic of the differential amplifier we’ll design

.

Vdd

M0

M3

M1

M2

M4

IN0 IN1

Vb

OUT

tr size [W/L μm]

M0,1 19.2/0.9

M2,3 29.4/0.9

M4 18.45/0.9


Schematic Design

Virtuoso Schematic Editor

• design a schematic in this window

• these are menu buttons on the left side

Check and Save

Save

Zoom in by 2

Zoom out by 2

Stretch

Copy

Delete

Undo

Property

Instance

Wire (narrow)

Wire (wide)

Wire Name

Pin

Cmd Options

Repeat


Schematic Design

Placing parts in the schematic

• click ‘Instance’ button or type ‘i’

• in the ‘Component Browser’, select ‘NCSU_Analog_Parts’ and browse for the parts you need

• you can changethe properties of the parts in‘Add Instance’


Schematic Design

Move

• Edit → Move

• Rotate / Sideways / Upside Down in ‘Move’ window Wire

• click ‘wire’ button or type ‘w’ Changing property

• select a part

• click ‘property’ button or type ‘q’ Zoom

• click ‘Zoom’ button or select the area to zoom in with right mouse button


Schematic Design

Adding in/out pins

• add a wire

• click ‘Pin’ button or type ‘p’

• give a pin name andselect input/output

• place a pin on a wire


Schematic Design

Check for any error

• click ‘Check and Save’ button

• make sure you don’tget warning or errormessage in CIW

Your design is nowready for a simulation


HSpice Simulation

Creating a netlist (1/4)

• run ‘Analog Environment’ from ‘Schematic Editor’: Tools → Analog Environment


HSpice Simulation


• in the ‘Analog Environment’ window, setup a directory for simulation: Setup → Simulator/Directory/Host…

• type in a directory name you want to create

ex) ~userid/AMIS05/CSE598A/sim

• click ‘OK’


HSpice Simulation


• in the ‘Analog Environment’ window, create a netlist: Simulation → Netlist → Create Final

• the netlist will appear in a new window


HSpice Simulation


• save the netlist: File → Save as…

• give a file name andclick ‘OK’


HSpice Simulation

Creating a Spice file (1/4)

• running simulation (Spectre or Hspice) in Cadence is not set up yet

• we need to create Spice file (.sp) manually for now

• open the netlist at your terminal

> nedit amp.net &

• remove everything belowthe circuit netlist

• modify the circuit netlist

- AMI06N to nch

- AMI06P to pch

circuit netlist


HSpice Simulation


• type in following Spice options

.option post

.option post_version=9007

.option ACCT=1 BRIEF=1

.option NUMDGT=8 MEASDGT=8

.option ACCURATE

Spice options


HSpice Simulation


• type in input sources

VVDD! VDD! 0 3.3

VIN0 IN0 0 SIN 1.65V 0.5V 10x

VIN1 IN1 0 1.65V

VVB VB 0 1.15V

input source


HSpice Simulation


• type in the model library.LIB ‘/home/users2/kyusun/tool/model/libcmos050t22a.sp’ CMOS1

• type in an analysis type and .END.TRANS 0.01NS 500NS

.END

• save as amp.sp

• refer to HSpice manuals for more information


HSpice Simulation

Running HSpice

• source ~chip/.cad and execute HSpice

> source ~chip/.cad

> hsp amp

• ‘AvanWaves’ will pop up when the simulation is done


HSpice Simulation

Simulation result

• select an analysis type (Transient in this example) and double click the nodes to check the results

• you’ll see display menus when right click on the display panel


Circuit Layout

Loading Virtuoso XL (1/2)

• you are ready for a layout if your schematic meets a design specification

• load ‘Virtuoso XL’ from the schematic editor

Tools → Design Synthesis → Layout XL

• select ‘Create New’and click ‘OK’


Circuit Layout

Loading Virtuoso XL (2/2)

• select options in ‘Create New File’

- Library Name : CSE598A

- Cell Name : amp

- View Name : layout

- Tool : Virtuoso

• click ‘OK’


Circuit Layout

Virtuoso XL Layout Editor

• layout your design in this window

• these are menu buttons on the left side

Save

Fit Edit

Zoom in

Zoom out

Stretch

Copy

Move

Delete

Undo

Property

Instance

Path

Polygon

Label

Rectangle

Ruler


Circuit Layout

Generating transistors (1/2)

• generate transistors and in/out pins from your schematic

: Design → Gen From Source…


Circuit Layout

Generating transistors (2/2)

• Layout Generation: I/O Pins, Instances

• I/O Pins: select metal1/dg, set the size to 0.9x0.9, and click ‘Apply’

• click ‘OK’


Circuit Layout

Layout Editor (1/12)

• tool generatedI/O pins andtransistors

• we need to doplacing androuting

• to see thetransistors,type ‘Shift+f’and to hide,type ‘Ctrl+f’

I/O pins

transistors


Circuit Layout


• click on a transistor in the layout editor

• the corresponding transistor in the schematic editor will be highlighted


Circuit Layout


• pins and instance names appear in the CIW when you click them in the layout editor


Circuit Layout


• when you move an instance or an I/O pin, yellow lines will appear

• these lines show where the ports or nodes need to be routed


Circuit Layout


• LSW (Layer Selection Window)

• user can select different layers ofthe mask layout

• select a layer you want to editby clicking on the layer in LSWfor editing


Circuit Layout

Layout Editor (6/12)• there is a glitch in current layout editor setup• transistors are placed off-grid after generating

layers in some case (this causes DRC errors)• to fix, go to ‘Display Options’

- Options → Display… or type ‘e’

• change ‘Grid Controls’- Type : Lines- Minor Spacing : 0.15- Snap Spacing : 0

• click ‘OK’


Circuit Layout


• move transistors and I/O pins to be placed on-grid

• open ‘Display Options’ and go back to previous ‘Grid Controls’ (dots 1 5 0.15 0.15)

off-grid on-grid


Circuit Layout


• now place transistors as you want to layout

• Rotate / Sideways / Upside Down are available in ‘Move’ window


Circuit Layout


• perform DRC check often during layout design to prevent design rule violation

• in layout editor : Verify → DRC…

• click ‘OK’

• white markers indicateDRC errors


Circuit Layout


• using ‘Ruler’ is helpful for resolving DRC errors, aligning cells, etc.

• to create ruler : Window → Create Ruler or type ‘k’

• left click at a starting point and another left click at a final point

• to clear all rulers : Window → Clear All Ruler or type ‘Shift+k’


Circuit Layout


• routing

- select a layer in LSW

- click ‘Rectangle’ or type ‘r’

- draw a wire

• contact

- type ‘o’

- select contact type

- number of contactsin row/column

contact

rectangle


Circuit Layout


• run a final DRC checkwhen done with layoutand save your design


Netlist and Simulation

Netlist extraction (1/3)

• run ‘Extractor’

- Verify → Extract…- click ‘Set Switches’- select ‘Extract_Parasitic_Caps’- click ‘OK’- check for any error message




• you may close layout editor and schematic editor windows now

• double click ‘extracted’ view in your ‘Library Manager’

• a layout editor with the extracted view will pop up




• run ‘Analog Environment’ from ‘extracted view’: Tools → Analog Environment

• following steps are same as simulating schematic design

: refer to ‘Creating a netlist’, ‘Creating a Spice file’,and ‘Running HSpice’ [slides 13~21]


Product Documentation

Help

• ‘HELP’ button in each window brings up product documentation

• this is very useful for learning basic features

ex)

• or email [email protected]

documentation for ‘Stretch’ in layout editor

Documents

SP2006 CSE598A/EE597G CAD Tool Tutorial Spring 2006 CSE598A / EE597G Analog-Digital Mixed-Signal CMOS Chip Design