SOUTHERN CROSS CBIAUTOMATIC WATER PRESSURE SYSTEMS

304 STAINLESS STEEL PUMPS FOR AUTOMATIC WATER PRESSURE BOOSTING

FEATURES

Easy installation and operation.

Supplied with either an anti-corrosion pressure tank with butyl diaphragm or electronic hydraulic controller.

All 304 grade stainless steel pump construction.

Supplied with sturdy stainless steel mounting foot.

Brass suction line check valve supplied.

Screwed suction and discharge connections:CBI-2 ... 25mm (1” BSPF)CBI-4 ... 32mm (1 1/4” BSPF) x 25mm (1” BSPF)

High quality mechanical shaft seal.

TEFC motor, 2800 rpm, 240V single phase, IP54 enclosure.

Supplied with 1.8m lead and 3 pin plug.

Simple repair, servicing, maintenance and parts replacement.

APPLICATIONS

DomesticAgriculturalLight IndustrialPressure BoostingHeating and Cooling SystemsPotable Water Supply

PUMP CONSTRUCTION MATERIALS OPERATING LIMITS

Capacity Maximum 130 l/minMax. Pressure 550kPa (80psi)Liquid Temp. +4˚C to +40˚CMax. Ambient Temp. +40˚CPumped Liquid Clean Water

Suction Chamber 304SSPump Housing 304SSIntermediate Chamber 304SSImpeller 304SSShaft 304SSShaft Seal SiC/CarbonDrain & Priming Plugs 304SSBase Plate 304SSCheck Valve Brass

CBIP-IF-1212

PENTAIR SOUTHERN CROSS8618 Warrego Highway, Withcott, QLD 4352, Australia. www.southerncross.pentair.com

All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners.Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.Pentair is an equal opportunity employer.A.B.N. 83 000 922 690 © 2012 Pentair, Ltd. All Rights Reserved.

© 2012 Pentair Southern Cross

PERFORMANCE

DIMENSIONS

Model Motor(Watts)Full LoadAmps

PumpStages

Discharge Pressure (kPA/psi)Tank Size

Tank Draw-off

(litres)

Max no. Taps @ 22 psi

150/22 200-29 250/36 300/44 350-51 400/58 450/65

Output (litres/min) Presscontrol UnitsCBI 2-30PC15 480 2.3 3 47 35 22 - - - - - - 4CBI 2-40PC15 570 2.6 4 54 46 39 27 15 - - - - 4.5CBI 2-50PC15 680 3.2 5 58 53 48 40 32 22 - - - 4.5CBI 2-60PC22 810 3.7 6 61 57 52 48 42 36 29 - - 5CBI 4-40PC15 1020 4.3 4 75 60 42 25 - - - - - 6CBI 4-50PC22 1220 5.4 5 94 84 71 57 40 24 - - - 7.5CBI 4-60PC22 1450 6.2 6 102 92 84 72 59 46 32 - - 8.5

Pressure Tank UnitsCBI 2-30PT8 480 2.3 3 52 39 23 - - - - 8 2.5 4CBI 2-40PT18 570 2.6 4 59 53 42 31 14 - - 18 5.5 4.5CBI 2-50PT18 680 3.2 5 60 57 51 43 35 23 - 18 5.5 5CBI 2-60PT18 810 3.7 6 62 60 57 52 45 38 30 18 5.5 5CBI 4-40PT18 1020 4.3 4 105 80 53 29 - - - 18 5.5 9CBI 4-50PT18 1220 5.4 5 126 110 92 72 50 24 - 18 5.5 10.5CBI 4-60PT18 1450 6.2 6 132 120 105 90 73 54 33 18 5.5 11

Model Length(mm) Width (mm) Height (mm) Weight (kg)

Presscontrol UnitsCBI 2-30PC15 325 204 320 13.4CBI 2-40PC15 343 204 320 13.6CBI 2-50PC15 361 204 320 13.9CBI 2-60PC22 419 204 320 14.1CBI 4-40PC15 413 204 320 14.6CBI 4-50PC22 441 204 320 15.7CBI 4-60PC22 469 204 320 16.6

Pressure Tank UnitsCBI 2-30PT8 325 239 530 14.0CBI 2-40PT18 343 275 595 15.6CBI 2-50PT18 361 275 595 15.9CBI 2-60PT18 419 275 595 16.1CBI 4-40PT18 413 275 595 16.6CBI 4-50PT18 441 275 595 17.7CBI 4-60PT18 469 275 595 18.6

SOUTHERN CROSS HBN316 STAINLESS STEEL HORIZONTAL MULTI-STAGE TRANSFER PUMPS

RELIABLE CORROSION RESISTANT TRANSFER PUMP

FEATURES

Compact design.

Available in 4 sizes in up to 6 stages.

Supplied with sturdy steel mounting foot.

Quick release locking band allows back pullout of pump element for servicing without disturbing the suction and discharge plumbing.

All parts in contact with liquid are 316 grade stainless steel.

10mm (3/8”) priming and drain plugs.

Screwed suction and discharge connections:HBN-2 ... 25mm (1” BSPF)HBN-4 ... 32mm (1 1/4” BSPF)HBN-8 & 12 ... 37.5mm (1 1/2” BSPF)

High quality mechanical shaft seal.

TEFC motor, 2800 rpm, 240V single phase or 415V three phase, IP54 enclosure.

240V units supplied with 1.8m lead and 3 pin plug.

Simple repair, servicing, maintenance and parts replacement.

APPLICATIONS

DomesticAgriculturalIndustrial CleaningPressure BoostingHeating and Cooling SystemsMetering SystemsWater Purification

PUMP CONSTRUCTION MATERIALS OPERATING LIMITS

Capacity Maximum 14m3/hourHead Maximum 55 metresLiquid Temp. 0˚C to +90˚CMax. Ambient Temp. +40˚CPumped Liquid Clean Water Light Oils Soft Water Demineralised Water

Suction Chamber 316SSPump Housing 316SSIntermediate Chamber 316SSImpeller 316SSShaft 316SSShaft Seal SiC/SiCO-ring VitonDrain & Priming Plugs 316SSBase Plate Steel

HBN-IF-1112

PENTAIR SOUTHERN CROSS8618 Warrego Highway, Withcott, QLD 4352, Australia. www.southerncross.pentair.com

All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners.Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.Pentair is an equal opportunity employer.A.B.N. 83 000 922 690 © 2012 Pentair, Ltd. All Rights Reserved.

© 2012 Pentair Southern Cross

PERFORMANCE

60

50

40

30

20

10

01 2 4 6 8 10 20

Tota

l Hea

d (m

)

20 40 60 80 100 200 300Q (l/min)

Q (m3/hour)

HBN2 HBN4

HBN8

HBN12

50Hz

ModelMotor (Watts) Full Load Amps

PumpStages

Max.Head(m)

Max.Flow

(L/min)

Length (mm) Height (mm)Width(mm)

Weight (kg)

1x240V 3x415V 1x240V 3x415V SinglePhase3

PhaseSinglePhase

3Phase

SinglePhase

3Phase

HBN 2-20 450 370 1.9 1.1 2 19 58 403 403 255 233 204 9.6 9.6HBN 2-30 540 480 2.4 1.1 3 28 58 403 403 255 233 204 9.9 9.9HBN 2-40 630 620 2.8 1.2 4 37 58 403 403 255 233 204 10.1 10.1HBN 2-50 800 820 3.8 1.6 5 47 58 403 403 255 233 204 10.8 10.8HBN 2-60 940 910 4.2 1.6 6 55 58 403 403 255 233 204 11.0 11.0HBN 4-20 560 560 2.5 1.2 2 20 116 403 403 255 233 204 9.6 9.6HBN 4-30 760 720 3.5 1.4 3 29 116 403 403 255 233 204 9.9 9.9HBN 4-40 1000 980 4.8 1.8 4 39 116 403 403 255 233 204 10.6 10.6HBN 4-50 1220 1210 5.7 2.3 5 48 116 441 441 255 233 204 12.1 12.1HBN 4-60 1410 1410 6.4 2.7 6 58 116 441 441 255 233 204 12.3 12.3HBN 8-10 720 760 3.4 1.7 1 19 165 403 403 255 233 204 10.2 10.0HBN 8-15 1150 1180 5.4 2.5 2 30 165 441 441 255 233 204 12.3 12.1HBN 8-20 1400 1430 6.4 3.2 2 38 165 441 441 255 233 204 13.5 13.3HBN 8-25 1930 1810 8.6 3.5 3 48 165 514 441 267 233 204 23.0 13.9HBN 8-30 2100 2050 9.3 4.0 3 57 165 514 493 267 261 204 23.1 22.2HBN 12-10 1200 1210 5.5 2.5 1 20 230 441 441 255 233 204 11.7 11.5HBN 12-15 1700 1680 7.8 3.4 2 30 230 514 441 255 233 204 13.4 13.2HBN 12-20 2460 2410 11 4.3 2 39 230 514 493 267 261 204 22.5 21.5HBN 12-25 2900 2870 13 5.3 3 50 230 514 493 267 261 204 25.7 24.4HBN 12-30 - 3640 - 6.7 3 58 230 - 539 - 284 204 - 30.2