Embed Size (px)
Citation preview
2015 DEF CatalogTable of Contents
4SPATCO DEF Solutions: Who We Are
Mini-Bulk SystemsRetail Island-Ready Mini-Bulk with Attached DispenserRemote Retail Mini-Bulk SystemsCommercial Island-Ready Mini-Bulk with Non-Weights & Measures Internal DispensingCommercial Island-Ready Mini-Bulk with Weights & Measures Internal DispenserCommercial Island-Ready or Remote Mini-Bulk with External DispenserTote Storage Enclosure: Single or Double Tote Capacity
2spatco.com
56789
10
3
11 TanksVertical Above-Ground Tanks with Heated Transfer BoxVertical Above-Ground Tanks with Dispensing SystemHorizontal Above-Ground Tanks with Dispensing SystemStand Alone Tanks
12131415
16 DispensersCommercial Dispenser: Enclosed PedestalPedestal Dispensing System for Tanks, Totes, & DrumsElectrical Medium Duty Tote & Drum Mounted SystemAir-Operated Medium Duty Tote & Drum Mounted SystemHeavy Duty Stand Alone Drum or Tote Dispensing SystemRetail Dispensers
171819202122
23 Portable SystemsPortable Tank SystemDrum Cart SystemBattery-Operated Medium Duty Tote & Drum Mounted SystemTransfer Skid System
24252627
28 Level Control SystemsVeeder Root ProbeOcio Level IndicatorPneumercatorGem Sensors
29303132
33 PumpsSubmersible PumpsMag-Drive PumpsSelf-Priming Diaphragm Pumps
343536
37 AccessoriesMeters & Hose ReelsNozzles, Breakaways, & SwivelsEPDM HosesStainless Steel HosesTote PartsHeaters & Connections
383940414243
We specialize in creating custom designed systems to meet your needs. Our engineering department allows us to do just that. SPATCO engineers will communicate with you directly to determine what system best suits your site’s needs. We can then customize that system and provide detailed drawings to show you what the system will look like and how it will function before we build it. Once your system is finished, we’ll provide 3D installation manuals to help you begin operation. Give us a call today for a quote. We’ll make a concerted effort to understand your needs and provide you a solution that meets them.
3spatco.com
We specialize in creating custom designed systems to meet your needs. Our engineering department allows us to do just that. SPATCO engineers will communicate with you directly to determine what system best suits your site’s needs. We can then customize that system and provide detailed drawings to show you what the system will look like and how it will function before we build it. Once your system is finished, we’ll provide 3D installation manuals to help you begin operation. Give us a call today for a quote. We’ll make a concerted effort to understand your needs and provide you a solution that meets them.
In late 2009, SPATCO Energy Solutions began engineering and producing a line of Diesel Exhaust Fluid dispensing and storage systems that addressed the EPA’s mandates to reduce NOx emissions. Today, SPATCO DEF Solutions is recognized as the leading manufacturer of DEF dispensing equipment, and we have partnered with leading DEF fluid suppliers across the country. We have applications for every market, including retail truck stops, commercial and private fleets, agriculture, and construction. We are industry experts in DEF solutions that promise to meet every need, and our dedication to excellent customer service is what makes us the most reliable and trusted solutions provider in the business.
Service & Installation
Dispensing & Storage Equipment
Engineering
We manufacture a diverse line of high quality products for dispensing and storing DEF that meets all EPA mandates for reducing harmful emissions. We offer a complete range of pumps, from small tote systems to 6,500 gallon heavy duty systems, and every system can be customized to your site’s specific needs. Each SPATCO DEF system is pre-piped, wired, and fluid-tested before delivery, and all of our systems are UL-508A and CSA C22.2.14 certified. As one of the leading manufacturers of DEF dispensing equipment and storage solutions, you can trust us to design a quality solution that will maintain the purity of your product.
Not only can we provide DEF equipment, we can also supply the support needed to use and maintain it. SPATCO DEF has a nationwide network of trained service and installation technicians available 24/7 for immediate assistance when you need it. Once your custom system is built, we’ll ensure your equipment is safely installed by our DEF equipment experts so you can begin pumping immediately. We have all parts in stock to ensure that your business stays up and running, day in and day out.
We specialize in creating custom designed systems, and that starts with understanding your needs and requirements. Our engineering department will communicate with you directly to determine what system best suits your site’s needs. We can then customize that system and provide detailed drawings and 3D system layouts so you know everything that’s going into your system and how it will work. We can then provide detailed operating manuals to help you begin operation. Call us today for a quote. We’ll make a concerted effort to understand your needs and provide you with a solution that meets them.
SPATCO DEF SolutionsWho We Are
Mini-Bulk
4spatco.com
Systems
Service & Installation
Dispensing & Storage Equipment
Engineering
500 G
1,000 G
Mini-Bulk
94”
162.5”
50”
47.25”
101.375”
101.375”
3,000 lbs
4,000 lbs
Length Width Height Weight
*Customized platforms add an additional 28-42” to length
SDE 1
SDE 2
Model
5spatco.com
A customized solution to fit on your island with numerous options that allow you to design the perfect system for your business.
FeaturesCompatible with Retail DEF Dispensers by Dresser Wayne, Gilbarco and BennettInsulated enclosure for DEF tank with FRP bodyHigh density polyethylene tankChoice of fill connection: OPW or Parker HannifinIntegral plastic liner containment included (1,000 gallon tank to meet 110% capacity)Roof hatch opening for servicing pumps, electrical, heater & plumbingCarbon steel powder coated fill port cabinetSubmersible pumpMotor starter for motor starting and protectionAutomatic shut off valve is provided to prevent overfilling of tank (optional)Heater with thermostat for maintaining temperature of 30° F in colder months (optional)Tank monitoring system installed per customer specification (optional)
Plumbing/Electrical
* Both units shown with cold weather DEF dispenser
System is pre-piped with stainless steel pipingFlanged fill & threaded discharge connections for ease in maintenance and repairRetail dispenser, pump motor, TLS probe & auto shut off valve are pre-wired to main electrical panelElectrical: 220V, 1 Phase, 4 wire, 30 A (warm weather) / 220V, 1 Phase, 4 wire, 60 A (cold weather)Provide 2D & 3D custom drawings and instruction manualsAll units tested
500 G Island-Ready Mini-Bulk
1,000 G Island-Ready Mini-Bulk
See page 22 for retail dispensers.
6-8GPM
flow rate
Notes
Mini-Bulk SystemsRetail Island-Ready Mini-Bulk with Attached Dispenser
500 G
1,000 G
Mini-Bulk
94”
162.5”
50”
47.25”
101.375”
101.375”
3,000 lbs
3,500 lbs
Length Width Height Weight
SDE 1
SDE 2
Model
2,000 G
2,500 G
183”
184”
72”
94”
99”
99”
4,500 lbs
5,000 lbs
SDE 3
SDE 4
3,000 G
5,000 G
183”
216”
101.5”
108”
101.375”
122.75”
5,500 lbs
6,500 lbs
SDE 4.5
SDE 5
System is pre-piped with stainless steel piping Flanged fill & threaded discharge connections for ease in maintenance and repairRetail dispenser, pump motor, TLS probe & auto shut off valve are pre-wired to main electrical panelElectrical: 220V, 1 Phase, 4 wire, 30 A (warm weather) / 220V, 1 Phase, 4 wire, 60 A (cold weather)Provide 2D & 3D custom drawings and instruction manualsAll units tested
Features
6spatco.com
A customized solution for your remote dispensing needs that can be installed anywhere on your lot and pipe to your retail dispenser.
Compatible with retail DEF dispensers by Dresser Wayne, Gilbarco and BennettInsulated enclosure for DEF tank with FRP bodyHigh density polyethylene tankChoice of fill connection: OPW or Parker HannifinIntegral plastic liner containment included (1,000 gallon tank to meet 110% capacity)Roof hatch opening for servicing pumps, electrical, heater & plumbingCarbon steel powder coated fill port cabinetSubmersible pumpMotor starter for motor starting and protectionAutomatic shut off valve is provided to prevent overfilling of tank (optional)Heater with thermostat for maintaining temperature of 30° F in colder months (optional)Tank monitoring system installed per customer specification (optional)
Plumbing/Electrical
Customized solution for pumping to multiple dispensers and long distances.
See page 22 for retail dispensers.
Notes
Mini Bulk SystemsRemote Retail Mini-Bulk Systems
6-8GPM
flow rate
500 Standard
1,000 Standard
Building
94”
162.5”
50”
47.25”
101.375”
101.375”
3,000 lbs
4,000 lbs
Length Width Height Weight
SDB 1
SDB 2
Model
*Optional dispensing on both sides
Features
Plumbing/Electrical
Features
7spatco.com
Internal dispensing by SPATCOInsulated enclosure for DEF tank with FRP body Spill containment liner made of EPDM material Large door opening for easy access in servicing components Integral door for accessing dispensing nozzle and flow meter Submersible pump Stainless steel automatic nozzle Full nozzle boot for nozzle storage Flow meter has 0.5 % accuracy Mounted inline filter housing with 1 micron filter Up to 25 ft. dispensing hose Spring retractable hose reel with stainless steel internals for dispensing hose Tank monitoring system installed per customer specification (optional) Positive displacement gear flow meter with electronic resettable totalizer and output pulse for connecting to existing fleet management system (optional) Heater with thermostat for maintaining temperature above 30° F (optional)Automatic overflow shut-off valve attached to DEF fill port (optional) Fuel Level Control options available (see pg. 29-32)
Unit pre-piped with stainless steel piping and DEF compatible hose-clamp flange connections for ease in maintenance and repair Commercial dispenser, pump motor, TLS probe & auto shut off valve are pre-wired to main electrical panelElectrical: 220V, 1 Phase, 4 wire, 30 AProvide 2D & 3D custom drawings and instruction manualsAll units tested
Plumbing/Electrical
500 G Island-Ready Mini-Bulk with Internal Dispensing
1,000 G Island-Ready Mini-Bulk with Internal Dispensing
A customized solution to fit on your island with numerous options that allow you to design the perfect system for your business.
Mini-Bulk SystemsCommercial Island-Ready Mini-Bulk with Non-Weights & Measures Internal Dispensing
6-8GPM
flow rate
500 G
1,000 G
Mini-Bulk
94”
162.5”
50”
47.25”
101.375”
101.375”
3,000 lbs
4,000 lbs
Length Width Height Weight
SDB1-WM
SDB2-WM
Model
8spatco.com
Compatible with commercial DEF dispenser by GasboyInsulated enclosure for DEF tank with FRP body Spill containment liner made of EPDM material Large door opening for easy access in servicing components Integral door for accessing dispensing nozzle and flow meter Submersible pump Stainless steel automatic nozzle Full nozzle boot for nozzle storage Flow meter has 0.5 % accuracy Mounted inline filter housing with 1 micron filter Up to 25 ft. dispensing hose Spring retractable hose reel with stainless steel internals for dispensing hose Positive displacement gear flow meter with electronic resettable totalizer and output pulse for connecting to existing fleet management system (optional) Heater with thermostat for maintaining temperature above 30° F (optional)Automatic overflow shut-off valve attached to DEF fill port (optional) Tank monitoring system installed per customer specification (optional)
Unit pre-piped with stainless steel piping and DEF compatible hose-clamp flange connections for ease in maintenance and repair Commercial dispenser, pump motor, TLS probe & auto shut off valve are pre-wired to main electrical panelElectrical: 220V, 1 Phase, 4 wire, 30 AProvide 2D & 3D custom drawings and instruction manualsAll units tested
Plumbing/Electrical
FeaturesFeatures
A customized solution to fit on your island with an internal dispenser. Numerous options allow you to design the perfect system for your business.
Plumbing/Electrical
Island-Ready Mini-Bulk with Internal Dispenser
Mini-Bulk SystemsCommercial Island-Ready Mini-Bulk with Weights & Measures Internal Dispenser
6-8GPM
flow rate
2,000 G
2,500 G
Remote Mini-Bulk
183”
184”
72”
94”
101.375”
99”
4,500 lbs
5,000 lbs
Length Width Height Weight
3,000 G 183” 101.5” 101.375” 5,500 lbs
5,000 G 216” 108” 122.75” 6,500 lbs
500 G
1,000 G
Island-Ready Mini-Bulk
94”
162.5”
50”
47.25”
101.375”
101.375”
3,000 lbs
4,000 lbs
Length Width Height Weight
Mini-Bulk SystemsCommercial Island-Ready or Remote Mini-Bulk with
Plumbing/Electrical
Features
9spatco.com
A customized solution to fit on your island or on your lot and pipe to the dispenser(s) with numerous options that allow you to design the perfect system for your business.
Shown with SPATCO Commercial dispenserCompatible with any commercial dispenserInsulated enclosure for DEF tank with FRP bodyHigh density polyethylene tankChoice of fill connection: OPW or Parker HannifinIntegral plastic liner containment includedRoof hatch opening for servicing pumps, electrical, heater & plumbingCarbon steel powder coated fill port cabinetSubmersible pumpMotor starter for motor starting and protectionAutomatic shut off valve to prevent overfilling of tank (optional)Heater with thermostat for maintaining temperature of 30° F in colder months (optional)Tank monitoring system installed per customer specification (optional)
Plumbing/ElectricalSystem is pre-piped with stainless steel pipingFlanged fill & threaded discharge connections for ease in maintenance and repairRetail dispenser, pump motor, TLS probe & auto shut off valve are pre-wired to main electrical panelElectrical: 220V, 1 Phase, 4 wire, 30 AProvide 2D & 3D custom drawings and instruction manualsAll units tested
Island-Ready Mini-Bulk with Dispenser
Mini-Bulk with Remote Dispenser
Features
See page 17 for commercial dispensers.
Notes
External Dispenser
6-8GPM
flow rate
Single Tote
Single Tote w/ Containment
Double Tote
Building
83”
83”
141”
50”
50”
50”
98.875”
99.5”
98.975”
1,950 lbs
2,500 lbs
2,300 lbs
Length Width Height Weight
Double Tote w/ Containment 141” 50” 105.125” 3,000 lbs
SDT 1
SDT 1-3
SDT 2
Model
SDT 2-3
10spatco.com
Insulated 330 gallon FRP skinned tote enclosure Large door opening for tote removal and replacementIntegral door for accessing dispensing nozzle and flow meterMag-drive self-priming pump Stainless steel automatic nozzleFull nozzle boot for nozzle storageFlow meter has 0.5 % accuracyMounted inline filter housing with 1 micron filterUp to 25 ft. dispensing hose5 ft. suction hose with micro-matic coupler for connection to toteSpring retractable hose reel with stainless steel internals for dispensing hoseMotor starter for motor starting and protectionHeater with thermostat for maintaining temperature above 30° FPositive displacement gear flow meter with electronic resettable totalizer and output pulse for connecting to existing fleet management system (optional)
Unit pre-piped with stainless steel piping and DEF compatible hoseHose-clamp connections ease in maintenance and repair.Pump wired with 120 V, ½ hp, AC TEFC C-Faced motorIf used with heater, electrical: 220V, 1 Phase, 4 wire, 30 APump motor & heater are pre-wired to main electrical panelAll units tested
Single Tote
Double Tote
Features
Plumbing/ElectricalPlumbing/Electrical
Features
*330 G Tote
A customized solution for your low volume dispensing needs with numerous options that allow you to design the perfect system for your business.
* Two 330 G Totes
Mini-Bulk SystemsTote Storage Enclosure: Single or Double Tote Capacity
6-8GPM
flow rate
Tanks
11spatco.com
6-8GPM
flow rate
12spatco.com
*3D design shown with heat traced and insulated tank, heated transfer box, and SPATCO dispenser
FeaturesChoice of tank: vertical or horizontalCompatible with retail and commercial DEF dispensersHeat traced and insulated high density polyethylene tankChoice of fill connection: OPW or Parker HannifinStainless steel piping and DEF compatible hoseMag-drive pumpOptional ladderAutomatic shut off valve is provided to prevent overfilling of tank (optional)Tank monitoring system installed per customer specification (optional)
Plumbing/ElectricalSystem is pre-piped Three clamp fill & threaded discharge connections for ease in maintenance and repairDispenser, pump motor, TLS probe, & auto shut off valve are pre-wired to main electrical panelElectrical: 120/240V, 1 Phase, 4 wire, 60 A 2D/3D custom drawings and instruction manuals providedAll units tested
Customized systems for cold weather application.
* Ask us about immersion tank heaters
Heated Transfer BoxCompatible with vertical/horizontal tanks and totesInsulated heavy duty powder coated carbon steel transfer boxDual function filling & dispensing systemEquipped with Mag-drive pumpInternal electrical panelThermostat controlled heated tape external connections and 400 W internal heater
See page 15 for tank options.See page 17 for commercial dispensers.See page 22 for retail dispensers.
Notes
TanksVertical Above-Ground Tanks with Heated Transfer Box
6-8GPM
flow rate
13spatco.com
Customized tanks for warm weather or indoor application.
FeaturesCompatible with retail and commercial DEF dispensersHigh density polyethylene tankChoice of fill connection: OPW or Parker HannifinStainless steel piping and DEF compatible hoseSubmersible pumpOptional ladderAutomatic shut off valve is provided to prevent overfilling of tank (optional)Tank monitoring system installed per customer specification (optional)
Plumbing/ElectricalSystem is pre-piped with stainless steel piping DEF compatible hoseFlanged fill & threaded discharge connections for ease in maintenance and repairRetail dispenser, pump motor, TLS probe, & auto shut off valve are pre-wired to main electrical panelElectrical: 220V, 1 Phase, 4 wire, 30 A (warm weather)2D/3D custom drawings and instruction manuals providedAll units tested
* Customized solution for pumping to multiple dispensers and long distances.
Features
Plumbing/Electrical
Heated Transfer Box
See page 15 for tank options.See page 17 for commercial dispensers.See page 22 for retail dispensers.
Notes* This system can be designed with a submersible pump (shown above with SPATCO dispenser) or with a mag-drive pump stand (page 14). This set-up can be applied to both vertical and horizontal tanks.
TanksVertical Above-Ground Tanks with Dispensing System
6-8GPM
flow rate
Features
14spatco.com
Plumbing/Electrical
FeaturesCompatible with retail and commercial DEF dispensersHeavy duty powder coated carbon steel standHigh density polyethylene tankChoice of fill connection: OPW or Parker HannifinStainless steel piping and DEF compatible hoseMag-drive pumpOptional ladderAutomatic shut off valve is provided to prevent overfilling of tank (optional)Tank monitoring system installed per customer specification (optional)
Plumbing/ElectricalSystem is pre-piped with stainless steel piping DEF compatible hoseFlanged fill & threaded discharge connections for ease in maintenance and repairRetail dispenser, pump motor, TLS probe, & auto shut off valve are pre-wired to main electrical panelElectrical: 220V, 1 Phase, 4 wire, 30 A (warm weather)2D/3D custom drawings and instruction manuals providedAll units tested
Customized tanks for warm weather or indoor application.
* Customized solution for pumping to multiple dispensers and long distances.
See page 15 for tank options.See page 17 for commercial dispensers.See page 22 for retail dispensers.
Notes* This system can be designed with a mag-drive pump stand (shown above with SPATCO dispenser) or with a submersible pump (page 13). This set-up can be applied to both horizontal and vertical tanks.
TanksHorizontal Above-Ground Tanks with Dispensing System
11spatco.com
*3D design tank shown with submersible pump and SPATCO Commercial dispenser
500 G
1,000 G
Tank
46”
60”
76”
89”
Diameter Height
1,500 G 86” 72”
2,000 G 90” 88”
2,500 G 90” 107”
3,000 G 90” 127”
4,000 G
4,500 G
120”
102”
104”
142”
5,000 G 102” 154”
5,500 G 120” 132”
6,000 G 120” 145”
6,500 G 120” 153”
11spatco.com8,000 G 120” 186”
*Tank dimensions may vary +/- 3% (standard molding tolerance).
335 G 44” 46” 56”
Diameter Height Length
525 G 48” 51” 72”
Tank
1,025 G 48” 50” 139”
2,000 G 62” 70” 160”
3,000 G 92” 76” 142”
5,000 G 92” 94” 190”
Features
Material options for a diverse range of application requirementsHigh-density linear polyethylene (HDLPE)*- black and natural white color complies with FDA regulation 177.1520 and NSF/ANSI 61 standardsCross-linked, high density polyethylene (XLPE) - black and natural white colorOpaque white sodium hypochlorite resin #880059 (up to 525 G)Sulfuric acid resin #880046 (up to 525 G)Low profile designs increase safety factors.Available in a wide variety of styles, 25-3400 gallonsHorizontal products are available in specific gravities up to 1.9All materials are UV stabilized for long-term outdoor service
FeaturesIndustrial (ASTM D1998-13) and Commercial design standards availableMaterial options for a diverse range of applicationsHigh-density linear polyethylene (HDLPE)*- black and natural white color - complies with FDA regulation 177.1520 and NSF/ANSI 61 standardsCross-linked, high density polyethylene (XLPE) - black and natural white colorOpaque white sodium hypochlorite resin #880059 (up to 12,500 G)Sulfuric acid resin #880046 (up to 15,000 G)Available with IBC 2009/CBC 2010 seismic and 150 mph wind restraint tie-down systemsSpecific gravity ratings are based on the industry's most severe calculationStandard specific gravity choices are 1.5 and 1.9, other ratings are available upon requestAll materials are UV stabilized for long-term outdoor serviceTanks available in 1.1, 1.35, 1.5, and 1.9 Specific Gravity in HDLPE and XLPE materials
Features
Plumbing/Electrical
Horizontal Above-Ground Tanks
Vertical Above-Ground Tanks
15spatco.com
Vertical tanks are available with heat trace and insulation.
Notes
TanksStand-Alone Tanks
Dispensers
16spatco.com
6-8GPM
flow rate
Pedestal 31” 20.25” 61.5”
Length Width HeightDispenser
SDP
Model
We also offer Wayne, Gasboy, Bennett, and Gilbarco commercial dispensers.
Notes
17spatco.com
FeaturesHeavy duty powder coated carbon steel cabinet Solenoid valve for dispenser isolationStandard SS construction automatic shut-off nozzle (option: SS construction automatic shut-off nozzle with magnetic miss-fill prevention device)Full nozzle boot for nozzle storageMounted inline filter housing with 1 micron filterHeavy duty hose reel (spring retractable hose reel with stainless steel internals for dispensing hose)Up to 24 ft. EPDM dispensing hose Heater with thermostat for maintaining temperature above 30° FResettable positive displacement gear flow meter with electronic resettable totalizer, 0.5 % accuracy and output pulse for connecting to existing fleet management system (optional)Weights & Measures approved meter (optional)
Plumbing/ElectricalFluid lines are DEF compatible hose, all pre-assembledHose-clamp connections for ease in maintenance and repairSystem pre-wired for 120 volt single phase (Amps is variable depending on pump option) All units tested
Ideal for bus garages and commercial fueling islands. Used with bulk and mini-bulk storage systems and stand-alone tanks with submersible pump, expanding with your fluid needs.
DispensersCommercial Dispenser: Enclosed Pedestal
5-7GPM
flow rate
Pedestal 31” 20.25” 61.5”
Length Width HeightSystem
SDP
Model
Pump Stand 31.5” 14” 50”SDHDPS
Features
Plumbing/Electrical
18spatco.com
Dispenser FeaturesHeavy duty powder coated carbon steel cabinet and pedestal standStandard heavy duty pump stand allows a single pump to feed multiple dispensersMag-drive self-priming pumpStandard stainless steel automatic shut-off nozzle or your choice of nozzleFull nozzle boot for nozzle storageResettable positive displacement gear flow meter with electronic resettable totalizer, 0.5 % accuracy and output pulse for connecting to existing fleet management systemMounted inline filter housing with 1 micron filterHeavy duty hose reel Up to 24 ft. EPDM dispensing hoseSpring retractable hose reel with stainless steel internals for dispensing hoseCoupler fitting (provision for connection of supply hose)Weights & Measures approved meter (optional)
Plumbing/Electrical
Ideal for bus garages and commercial fueling islands. Used with tanks, totes, and drums with mag-drive pump, expanding with your fluid needs.
Fluid lines are DEF compatible hose, all pre-assembledHose-clamp connections for ease in maintenance and repairSystem pre-wired for 120 volt single phase (Amps vary depending on pump option) All units tested
* Systems do not include drums, totes, or tanks
Customized solution for pumping to multiple dispensers and long distances.
Notes
DispensersPedestal Dispensing System for Tanks, Totes, & Drums
Heavy Duty Pump Stand Features
For use with individual pedestal dispensersHeavy duty Mag-drive pump feeds multiple dispensersMicro-matic connector for closed system dispensing to drum, tote, or tankIncludes circuits and electronic controls* Field piping and wiring is required between pump stand/tote and dispensers
8GPM
flow rate
Dispenser Features
19spatco.com
Plumbing/Electrical
FeaturesElectric diaphragm pump, preassembledinlet port, male micromatic valve fittingOutlet port, 1” female NPTStainless steel pump mount bracket with nozzle rest (holder)Fuel dispensing nozzleSuction hose 3/4” EPDM DEF suction hose with quick disconnectDischarge hose, 3/4” EPDM DEF dispensing hoseTurbine flowmeter (optional) Flow range: 10 to 90 lpm (2.65 to 23.8 US gpm) Accuracy: ±1.0% of readingLightweight & portableChemical resistant construction
Plumbing/ElectricalUnit is pre-wired and plumbed, ready to use out of the boxElectrical: 120V, single phaseAll units tested
Designated for small application totes and drums.
Ask us about dispensing other chemicals.
Notes
DispensersElectrical Medium Duty Tote & Drum Mounted System
Heavy Duty Pump Stand Features
Electrical Medium Duty
Dispenser
SDPM
Model
6-8GPM
flow rate
20spatco.com
Features
Plumbing/Electrical
FeaturesAir-operated pump, preassembledInlet port 1” female NPTOutlet port, 1” male NPTStainless steel pump mount bracket with nozzle rest (holder)Fuel dispensing nozzleSuction hose 3/4” EPDM DEF suction hose with quick disconnectDischarge hose, 3/4” EPDM DEF dispensing hoseTurbine flowmeter (optional) Flow range: 10 to 90 lpm (2.65 to 23.8 US gpm) Accuracy: ±1.0% of readingLightweight & portableChemical resistant construction
Plumbing/ElectricalUnit is pre-wired and plumbed, ready to use out of the boxElectrical: 120V, single phaseAll units tested
Designated for small application totes and drums.
Ask us about dispensing other chemicals.
Notes
DispensersAir-Operated Medium Duty Tote & Drum Mounted System
6-8GPM
flow rate
Stand with Hose Reel 36.5” 18.2” 63”
Length Width Height
Stand with High Hose Retrieval 36.5” 18.2” 79”
Dispenser
SDH-X3
Model
SDH-X2
21spatco.com
FeaturesHeavy duty powder coated carbon steel standMag-drive self-priming pump Stainless steel automatic nozzleFull nozzle boot for nozzle storageFlow meter has 0.5 % accuracyMounted inline filter housing with 1 micron filterUp to 25 ft. dispensing hose5 ft. suction hose with micro-matic coupler for connection to toteSpring retractable hose reel with stainless steel internals for dispensing hose or high hose retrieverMotor starter for motor starting and protectionPositive displacement gear flow meter with electronic resettable totalizer, and output pulse for connecting to existing fleet management system(optional)
Unit is pre-wired for 120V, 30 A, single phase serviceAll units tested
Plumbing/Electrical
Ideal for bus garages and commercial fueling islands. Used with tanks, totes, and drums with mag-drive pump, expanding with your fluid needs.
DispensersHeavy Duty Stand Alone Drum or Tote Dispensing System
22spatco.com
Numerous dispenser options are available to create a customized system suited for your needs.
Features
Plumbing/Electrical
FeaturesFilterInlet side, stainless steel housing with five micron, replaceable filter elementHose handling cabinetAutomatic hose retraction system returns hose to cabinet after dispensing; standard configuration is RH side hose module; optional left-hand versionSliding nozzle access door with adjustable counter weight balance to access nozzle; electric activated doors to insulate and retain hose17.4’ DEF compatible hose with 1” BSPP fittings (12 ft. usable reach) OPW swivel/breakaway providedNozzle boot designed for OPW 21GU series nozzle has sensor to detect hose hang-up and complete transactionPositive displacement, two-piston meter with integral hall-effect pulser featuring no moving parts to wear outProportional solenoid valve, programmable through electronic register to set maximum flow rate at recommended 10 GPMProduct inlets1.5” NPT female inlet with 1” BSPP male adapter Electrical boxesJunction box in hydraulic cabinet to make all dispenser power and control wiring terminationsPulse output interface, left-hand hose cabinet, less heater, all stainless steel cabinet or stainless steel doors only, volume preset keypad, stop button, and bezel lockElectrical: 120VAC 60 HZ, 120/240VAC 50/60 HZStandards/Approvals: ADA compliant user controls per ANSI A117.1; FCC, W&M approvals
Wayne Cold Weather Dispenser
Wayne Warm Weather Dispenser
We also offer Bennett and Gilbarco retail dispensers. Call for more information.
Notes
DispensersRetail Dispensers
Portable
23spatco.com
SystemsFeatures
6-8GPM
flow rate
Portable Tank 40” 34” 40”
Length Width HeightSystem
SPS
Model
24spatco.com
FeaturesHeavy duty powder coated carbon steel skid with forklift slotsNon-metallic seal-less, ½ hp mag-drive self-priming pump(serves dual purpose; same pump fills tank & dispenses product) Standard SS construction automatic shut-off nozzle Nozzle storage box for nozzle protection Resettable turbine style flow meter with 1% accuracy Mounted inline filter housing with 1 micron filter20 ft. EPDM dispensing hoseRotary on/off switch with contactor for pump motor10 ft. EPDM suction hose with micro-matic coupler; dual purpose for connection to tote for filling tank and connection to tank for dispensing DEF (optional)Positive displacement gear flow meter with electronic resettable totalizer, 0.5 % accuracy and output pulse (optional)
Plumbing/ElectricalUnit pre-piped with stainless steel piping and DEF compatible hoseSystem pre-wiredElectrical: 120V, single phase (optional: AC/DC inverter for 12V connection to battery)All units tested
Perfect for your agriculture and construction equipment. System offered with 60 or 100 gallon polyethylene tank.
Portable SystemsPortable Tank System
6-8GPM
flow rate
Drum Cart 31” 28” 41”
Length Width HeightSystem
SDC
Model
Features
Plumbing/Electrical
25spatco.com
FeaturesSelf contained positive displacement diaphragm pump system for filling and dispensing DEF product into and out of the drumOne suction hose, ¾” ID, fitted with micro-matic coupler with dual functions; connected to tote when filling 55 gallon drum or connected to drum when dispensing DEF product Fill line hose, 3/4” ID, fitted with micro-matic fill head coupler; connected to drum during filling process12 ft. long discharge hose connected to a stainless steel nozzleStandard SS construction automatic shut-off nozzle Nozzle holderMounted inline filter housing with 1 micron filter12 V batteryFlowmeter (optional) with resettable totalizer up to 0.5% accuracy
Plumbing/ElectricalSS ball valves Fluid lines are DEF compatible hose, all pre-assembledUnit is pre-wired and plumbed, ready to use out of the boxUnit requires 110-120 Volt power supply or 12 V batteryAll units tested
Perfect for your agriculture and construction equipment. Portable carrier for 55 gallon drum.
*Drum is not provided
Portable SystemsDrum Cart System
8GPM
flow rate
26spatco.com
FeaturesElectric diaphragm pump, pre-assembledinlet port, male micromatic valve fittingoutlet port, 1” female NPTStainless steel pump mount bracket with nozzle rest (holder)Fuel dispensing nozzleSuction hose 3/4” EPDM DEF suction hose with quick disconnectDischarge hose, 3/4” EPDM DEF dispensing hoseTurbine Flowmeter (optional) Flow range: 10 to 90 lpm (2.65 to 23.8 US gpm) Accuracy: ±1.0% of readingLightweight & portableChemical resistant construction
Plumbing/ElectricalUnit is pre-wired and plumbed, ready to use out of the box12V battery-operatedAll units tested
Designated for small application totes and drums. Perfect for agriculture and construction equipment.
Ask us about dispensing other chemicals.
Notes
Portable SystemsBattery-Operated Medium Duty Tote & Drum Mounted System
40GPM
flow rate
27spatco.com
Perfect for loading and unloading tanks, trucks, totes, and drums.
FeaturesAvailable with gas or diesel engine operationWeights and Measures approved for US and CanadaManual resettable totalizer50’ / 1.25” hoseAuto start engineDispensing flow rate = 40 GPM120 V generator system50’ / 1.25” heavy duty hoseTicket/receipt printer2” stainless steel dry disconnect12V powered stainless steel hose reel
Plumbing/ElectricalUnit is pre-wired and plumbed, ready to use out of the box
Features
Plumbing/Electrical
Transfer Skid 48.5” 40” 55”
Length Width Height
Portable SystemsTransfer Skid System
System
Features Level Control
28spatco.com
Plumbing/Electrical
Systems
29spatco.com
Veeder-Root's Mag Plus Probe is designed for both aboveground (AST) and underground (UST) storage tank applications that require extremely accurate and reliable inventory readings for SIR and business management needs. This probe solution meets even the most challenging alternative fluid and non-retail applications, delivering trouble-free performance in gasoline, diesel, and a wide variety of approved fluids. Available in standard and custom lengths up to 12“, accommodates all small rectangular and cylindrical ASTs and USTs under 30,000 gallons, and is compatible with all TLS consoles.
FeaturesTemperature performance: -40°F to 140°F (-40°C to 60°C)Reduced probe canister head and adjustable spacers for quick and easy installationStainless-steel guide tube for use in both retail and non-retail alternative fluid applicationsNew 2" and 3" float kits, which enable lower product-level reading capabilitiesChemical resistant constructionWireless probes available
Probe Part #s:6 ft. - SDLC-6048 ft. - SDLC-407
Probe Kit Part #s:10 ft. Cable, 4” Float Kit - SDLC-014 5 ft. Cable, 4” Float Kit - SDLC-004
Parts
Systems
Level Control SystemsVeeder-Root Probe
Features
30spatco.com
Features
OCIO detects the static pressure generated by the fluid height by means of a tube inserted into the tank and displays the fluid level or volume.
A tube for detecting static pressure: The tube end is inserted from the top of the tank and lowered down into the liquid until it touches the bottomA control unit for displaying the level and managing the system. The unit is equipped with an intuitive, complete software and permits the connection of two alarm or lock devicesThe software is used to: Set tank type and dimensions Define alarm levels Define indication level Define measurement unit Calibrate the instrument
When your fuel is running low, the system will notify you via text or email.
Notes
Ocio Level Indicator - SDP-200-050
Parts
Level Control SystemsOcio Level Indicator
31spatco.com
Fault detection capable IS sensor inputs using Pneumercator "F" series discrete sensorsRS-232 serial port standard; optional secured, internal modem, FAX/modem, or Network Interface Card; RS-485 peripheral bus standardFully programmable plug-in relay output/contact closure input cards; each card provides four 10 amp at 120 VAC relay contacts, and four dry contact inputs, OR eight 5 amp at120 VAC relay contacts, and eight dry contact inputs, OR sixteen 5 amp at 120 VAC relay contactsFully programmable plug-in Analog Output card; each card provides 6 or 12 output channelsReal-time clock and log memory with battery back-up; configuration data maintained in EEPROMSuperbright, sunlight-readable LED display with discrete LED annunciators for 5 alarm conditions: Leak, Setpoint 1, Setpoint 2, Setpoint 3 and WaterAutomatic logging of shift inventory, unsupervised deliveries, bulk sales, alarms, leak test, water removal, product ordering, and theftsAccess live, log and configuration data via RS-232, modem port, or TCP/IP using TMSCOMM softwareAutomatic and manual hardcopy reports via optional internal printerVolumetric computations for steel and fiberglass tanks, including manifolded tanks and irregular geometriesSystem configuration can be performed at the site, or remotely via the serial, modem communications, or ethernet port"Black box" configuration available for ultra low-cost applications where serial or modem communications are used for collecting acquisition and log data, remote sites or SIRLocking NEMA 12 enclosure standard, optional NEMA 4 or 4X availableBack-up generator applications supportedUL approved, file #E139464; CSA approval pending110/220 VAC operation; DC Input options available
EPA compliance for 0.1 or 0.2 gph in-tank leak detection in tanks up to 75,000 gallons.Magnetostrictive level probe and IS discrete sensor capacities; 12 probes with 24 sensors, 8 probes with 32 sensors, 4 probes with 40 sensors.
Pneumercator Console - TMS1000D-23-00-0Pneumercator Probe - MP5500S-076-11Pneumercator Probe Kit - PK2-DM5Pneumercator Float - S2XC
Parts
Features
Level Control SystemsPneumercator
32spatco.com
XM800 with 316 SS stem and 316 SS floatComplies with ISO-22241 standard+/- 1/4” accuracyJ-box with 4-20 mA output2” NPTM mountingLLCO and HLCO protection via Red Lion control2” space at bottom to account for tank squattingLo = 8 ft for 5,000 gal tankLo = 6 ft for 1,000 gal tankPAXP Display with multi channel 5A SPDT logic + power supply (sourced via RL Matus)
Model: XT-800Specific Gravity: 1.1Max. Pressure: 20Stem Length: 72.5 - 120Stem Construction: PipeOperating Temp.: 120Stem Material: 316 Stainless SteelMounting Type: 2” NPTTermination: Junction BoxOutput: 4 - 20mA with Junction BoxFloat Material: 316 Stainless SteelFloat Type: 316 Stainless Steel (52084)Media Type: DEFFloat Stops: Collars
PAXP Display
Your low cost alarm system/fluid level display.
Features
DEF Gem Sensor
Features
Gem Sensor - 235203
Parts
Can be connected to a buzzer, automatic shut-off valve, or level monitoring display.
Notes
Level Control SystemsGem Sensors
Pumps
33spatco.com
Features
DEF Gem Sensor
Parts
34spatco.com
1/2 HP Standard Flow Submersible Pump
Multi-stage 1/2 HP Standard Flow Submersible Pump is available with 2 impellers and is ideal for use in supplying DEF from storage tanks. Up to 50 ft. cable available.
Ideal for 1-2 dispensers (Part #: SDA-001-087B)
1 HP Standard Flow Submersible Pump
Multi-stage Standard Flow Submersible Pump is available with 4 impellers and is ideal for use in supplying DEF from storage tanks.
Ideal for 3-4 dispensers (Part #: SDA-001-087B1)
RX series pumps are available in 1 and 2 HP, in single phase and three-phase. Class F insulation and overload protection ensures a long life. Up to 50 ft. cable available.
1 HP - Ideal for long distances and 1-2 dispensers (Part #: RX750SS-230)
2 HP - Ideal for long distances and 3-4 dispensers (Part #: RX15SS-208T)
Stainless Steel Submersible Pump
Other sizes available upon request.
Notes
PumpsSubmersible Pumps
35spatco.com
FeaturesSealless, self-priming, plastic, horizontal mag-drive pumpBoth electrical and air-operated pumps availableClose-coupled designPolypropylene constructionReplaceable shaftMounts to NEMA and IEC motor framesMounts to motor without disassemblyPump retains fluid for re-priming when shut off without a check valvePump lifts up to 25 feetPump primes up to 18 feet in 90 seconds
1/2 HP Mag-Drive Self-Priming PumpIdeal for 1-2 dispensers (Part #: SDP1-35)
1 HP Mag-Drive Self-Priming PumpIdeal for 3-4 dispensers (Part #: SPP1-418)
We can provide other pump sizes depending on customer application.
Notes
PumpsMag-Drive Pumps
36spatco.com
The Piusi self-priming diaphragm pump requires no dynamic seals and is specifically designed for DEF transfer applications. This pump also ensures the fastest refilling without ever exceeding the maximum flow rates recommended by the main vehicle manufacturers. The pump is available in 120V and 12V battery.
* The pump is available in 120V and 12V battery.
120V - SDMDP-112V - SDMDP-2
Parts
AC PumpVoltage 230/50VHose tail connection 3/4”Absence of dinamic sealsON/OFF switch6.5 ft. cable with socketDuty cycle 20 min
DC PumpVoltage 12 / 24 VHose tail connection 3/4”Absence of dinamic sealsON/OFF switch6.5 ft. cable with clamps Duty cycle 20 min
Great for use with totes and drums.
Notes
PumpsSelf-Priming Diaphragm Pumps
AC PumpVoltage 230/50VHose tail connection 3/4”Absence of dinamic sealsON/OFF switch6.5 ft. cable with socketDuty cycle 20 min
DC PumpVoltage 12 / 24 VHose tail connection 3/4”Absence of dinamic sealsON/OFF switch6.5 ft. cable with clamps Duty cycle 20 min
Accessories
37spatco.com
SDR-N816Spring Rewind Hose Reel for DEF available up to 25 ft. hose
S7RRDR-2SPATCO DEF Gear Flow Meter pulse output
IT400Weights & Measures approved Turbine Flow Meter with pulse output
SDM-T-BSPSPATCO DEF Turbine Meter
38spatco.com
AccessoriesMeters & Hose Reels
39spatco.com
SDN-A-1Stainless steel automatic nozzle for DEF
21GU-0400Stainless steel automatic nozzle for DEF without mis-filling prevention for Wayne
21GU-0500Stainless steel automatic nozzle for DEF with mis-filling prevention for Wayne
21GU-050GStainless steel automatic nozzle for DEF without mis-filling prevention for Gilbarco
21GU-040GStainless steel automatic nozzle for DEF without mis-filling prevention for Gilbarco
21GU-SSBSwivel breakaway combo 1” BSPP Outlet
21GU-SSSSwivel 1” BSPP Outlet
21GU-SFHSST 1” BSPP Fixed Inlet
MFPDMis-Filling Prevention Device Opener
AccessoriesNozzles, Breakaways, & Swivels
SDH-D-123/4” x 12’ DEF Discharge Hose with one 3/4” NPT swivel X 3/4” NPT fixed end
SDH-D-153/4” x 15’ DEF Discharge Hose with one 3/4” NPT swivel X 3/4” NPT fixed end
SDH-D-203/4” x 20’ DEF Discharge Hose with one 3/4” NPT swivel X 3/4” NPT fixed end
SDH-D-243/4” x 24’ DEF Discharge Hose with one 3/4” NPT swivel X 3/4” NPT fixed end
SDR-200-0063/4” DEF hose per ft.
SDH-BSP-1212’ discharge hose with 1” FBSP Female Thread
SDHP-D-303/4” x 30’ DEF Discharge Hose with one 3/4” NPT swivel X 3/4” NPT fixed end
SDHP-D-123/4” X 12’ discharge hose with 3/4” NPT swivel X 3/4” open end
SDHP-S-43/4” X 4’ DEF suction hose with 3/4” NPT swivel X 3/4” open end
SDHP-S-53/4” X 5’ DEF suction hose with 3/4” NPT swivel X 3/4” open end
SDT-200-0013/4” DEF hose per ft.
Custom fittings and sizes available upon request.
40spatco.com
AccessoriesEPDM Hoses
MH100SS0404-241” x 24” 304 SS flex hose MNPT x MNPT
SDH-100-0141” x 14’ SS braided hose with 1” SS ends
SDH-100-0101-1/2” x 10’ SS braided hose with 1-1/2” flanges
SDH-100-0161-1/2” x 16’ SS braided hose with 1-1/2” flanges
FSMS1501501.5” X 15” Braided Stainless Steel Flex Hose
FSMS2401501.5” X 24” Male/Male Braided Stainless Steel Swivel Flex Hose
FSMS3001501-1/2” X 30” Male X Male Braided Stainless Steel Swivel Hose
FSMS1801501-1/2” X 18” Male X Male Braided Stainless Steel Swivel Flex Hose
FSMS4801501-1/2” X 48” Male X Male Braided Stainless Steel Swivel Flex Hose
FSMS3002002” X 30” Male X Male Braided Stainless Steel Swivel Hose
FSMS2402002” X 24” Male/Male Braided Stainless Steel Swivel Flex Hose
FSMS3602002” X 36” Male/Male Braided Stainless Steel Swivel Flex Hose
FSMF3001501-1/2” X 30” Male X Female Braided Stainless Steel Hose
FSMF1801501-1/2” X 18” Flexible Male X Female Braided Stainless Steel Hose
FSMF2401501-1/2” X 24” Male/Female Braided Stainless Steel Flex Hose
FSMF2402002” X 24” Male X Female Braided Stainless Steel Flex Hose
Custom fittings and sizes available upon request.
41spatco.com
AccessoriesStainless Steel Hoses
SDA 743-097Tote RSV Valve
SDA 744-048RSV Dispense Coupler 3/4” barbed outlet
SDA 744-026Fill Head Coupler 1” NPT Liquid Inlet
SDA 755-003Tote Valve
SDA 756-008BEPV Dispense Coupler 3/4” barbed outlet
SDA 749-3266” Center Mount Cap (Used for both connections shown above)
SDA 743-236/1065275 G 1” Tote Down Tube
SDA 743-236/1245330 G 1” Tote Down Tube
SDA 755-641/1065275 G 1/2” Tote Down Tube
SDA 755-641/1245330 G 1/2” Tote Down Tube
42spatco.com
AccessoriesTote Parts
SDHTR/SDMT-KIT1,000 Watt Force Fan Heater
SDHTR-1000CSA CSA-Approved 1,000 Watt Force Fan Heater
178-BROAN/SDMT-KIT2,000 Watt Force Fan Heater
SDHTR-CSACSA-Approved 2,000 Watt Force Fan Heater
FGC3001400 Watt Force Fan Heater
1672AN-SS202” Stainless Steel Adaptor
1772-D-SS202” Stainless Steel Coupler
PHC-2SSNIP-NPT2” Stainless Steel Adaptor
SD-4162” Screw-In Coupling (for PHC-2SSNIP-NPT)
PHC-2SS-COUPLER2” Stainless Steel Coupler
43spatco.com
AccessoriesHeaters & Connections
SPATCO Energy Solutions4800 North Graham StreetCharlotte, NC [email protected]
:List[T]={...} def listInt() : List[Int] = {...} def listBool() : List[Bool] = {...} def baz(a, b) = CONS(a(b),](https://img.pdfslide.us/doc/110x75/56649e6a5503460f94b68938/type-inference-def-constxt-lstlisttlistt-def-listint-.jpg)
