R-312/200HYDRAULIC ROTARY RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t

R-312/200HYDRAULIC ROTARY RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t

HYDRAULIC ROTARY RIG

A new model

R-312/200

1 - Undercarriage with expandable tracks from 2.5 to 3.7 m by means of hydraulic cylinders

2 - Turret c/w CUMMINS 6BTA55.9-C200diesel engine and sound proofed canopy,mounted on a 360° slew ring

3 - Winch assembly

4 - Parallelogram system allowingworking radius adjustment alwaysmaintaining the mast in vertical position.C/w electronic device for automatic stop

5 - Self-erecting mast composed by an intermediate element 11.9 m long and

a top element 3.5 m long. The max torquecan be applied all over the mast length

6 - Sheave cathead

7 - Crowd system by means of 3.5 mhydraulic cylinder

8 - Rotary head with 3 drilling speeds and one high spin off speed. The max torque is obtained for each drilling speed

9 - Telescopic kelly bar with guide to mast available with friction or mechanical locking type

3 12

5

7

9

8

6 R-312/200 R-312/200

CFA 360° versionCFA standard version

Transport Condition Transport Condition

Working Condition Working Condition

1050

0

5250

1932

2550

1267

2553

3500(3000+3500)

4500

2256

3198

3500

PU

LL D

OW

N S

TR

OK

E

395 750

890

1778

4 1049

0 8646

830

3500 (MIN. 3000) 3621

885

6000

ø 750

750

2490

0

1660

0

1350

0M

AX

DE

PT

H: 1

3000

(19

000)

EXTENDED TRACK WIDTH 3700 mmSHOE WIDTH 600 mm

3500(3000÷3500)

45103500

520 94

0

6000

2174

2

1622

8

1300

0M

AX

DE

PT

H: 1

2500

+60

0045

0 500

3950MIN. 2750 MAX. 3950

344

3710

3666

795

2540

3277

1652

952

3269

1199

4510

1360

1986

4311

885

1279 16

52

12090

1474

718

1870

WEIGHT: 1000 kg

3426

1652

952

1199

3269 4510

WEIGHT: 33000 kg

12119

1397

3254

4340

795

852 16

49

Max pile diameterMax pile depth

Max nominal torqueMax drilling speedSpin off speedMain winch nominal line pullAuxiliary winch nominal line pullEnginePowerCrowd systemOperating weightTransport weight (c/w kelly bar)

4

After the success of the R-312 HD Soilmec introduces the new model R-312/200 performing:- bored piles with dry drilling or bentonite mud- continuous flight auger piles (CFA)

The main features of the R-312/200 are the following:- new powerful rotary- high speed drilling- easy transport: it can be transported with rotary and kelly bar installed- compliance with the machine laws for safety standards- total reduction of rig up time, about 20 minutes from arrival to the job site- easy to use and handle- low operating costs- wide range of accessories (depthmeter, inclinometer, air conditioning, free fall winch)

The nominal values are referred to 100% total efficiency.

Large diameter bored pile

Standard dimension of tool connection is 130x130 mm / H

=

kelly stub height from ground level

2,93,33,98,59,010,311,512,2

5,05,04,68,38,36,764,773,86

7,59,011,010,511,513,515,516,5

25,034,038,046,551,562,072,076,5

4x4x4x5x5x5x5x5x

Mechanical locking kelly bar – Ø 355 mmelements

nolength

mdepth

mweighttonn

heightm

2,42,93,33,94,35,1

5,05,05,04,65,04,6

6,07,59,011,09,011,0

19,025,032,039,040,048,0

4x4x4x4x5x5x

Friction kelly bar – Ø 355 mmelements

nolength

mdepth

mweighttonn

heightm

mmmm

kNmrpmrpmkNkN

typeBHPkN

tonstons

150048 (with 5x11 kelly bar)38,5 (with 4x11 kelly bar)

1304215313356

CUMMINS QSB5.9200 @ 2200 rpm

123.7 / 101.83534

mmmkN

tons

75013-638031

Max pile diameterMax pile depthMax nominal extraction forceTransport weight

Continuous Flight Auger (CFA)

LARGE DIAMETER BORED PILE CONTINUOUS FLIGHT AUGER

Inside cabin view

Low overhead version Standard version

2500

2540

600

707 15

09

HYDRAULIC ROTARY RIG

A new model

R-312/200

1 - Undercarriage with expandable tracks from 2.5 to 3.7 m by means of hydraulic cylinders

2 - Turret c/w CUMMINS 6BTA55.9-C200diesel engine and sound proofed canopy,mounted on a 360° slew ring

3 - Winch assembly

4 - Parallelogram system allowingworking radius adjustment alwaysmaintaining the mast in vertical position.C/w electronic device for automatic stop

5 - Self-erecting mast composed by an intermediate element 11.9 m long and

a top element 3.5 m long. The max torquecan be applied all over the mast length

6 - Sheave cathead

7 - Crowd system by means of 3.5 mhydraulic cylinder

8 - Rotary head with 3 drilling speeds and one high spin off speed. The max torque is obtained for each drilling speed

9 - Telescopic kelly bar with guide to mast available with friction or mechanical locking type

3 12

5

7

9

8

6 R-312/200 R-312/200

CFA 360° versionCFA standard version

Transport Condition Transport Condition

Working Condition Working Condition

1050

0

5250

1932

2550

1267

2553

3500(3000+3500)

4500

2256

3198

3500

PU

LL D

OW

N S

TR

OK

E

395 750

890

1778

4 1049

0 8646

830

3500 (MIN. 3000) 3621

885

6000

ø 750

750

2490

0

1660

0

1350

0M

AX

DE

PT

H: 1

3000

(19

000)

EXTENDED TRACK WIDTH 3700 mmSHOE WIDTH 600 mm

3500(3000÷3500)

45103500

520 94

0

6000

2174

2

1622

8

1300

0M

AX

DE

PT

H: 1

2500

+60

0045

0 500

3950MIN. 2750 MAX. 3950

344

3710

3666

795

2540

3277

1652

952

3269

1199

4510

1360

1986

4311

885

1279 16

52

12090

1474

718

1870

WEIGHT: 1000 kg

3426

1652

952

1199

3269 4510

WEIGHT: 33000 kg

12119

1397

3254

4340

795

852 16

49

Max pile diameterMax pile depth

Max nominal torqueMax drilling speedSpin off speedMain winch nominal line pullAuxiliary winch nominal line pullEnginePowerCrowd systemOperating weightTransport weight (c/w kelly bar)

4

After the success of the R-312 HD Soilmec introduces the new model R-312/200 performing:- bored piles with dry drilling or bentonite mud- continuous flight auger piles (CFA)

The main features of the R-312/200 are the following:- new powerful rotary- high speed drilling- easy transport: it can be transported with rotary and kelly bar installed- compliance with the machine laws for safety standards- total reduction of rig up time, about 20 minutes from arrival to the job site- easy to use and handle- low operating costs- wide range of accessories (depthmeter, inclinometer, air conditioning, free fall winch)

The nominal values are referred to 100% total efficiency.

Large diameter bored pile

Standard dimension of tool connection is 130x130 mm / H

=

kelly stub height from ground level

2,93,33,98,59,010,311,512,2

5,05,04,68,38,36,764,773,86

7,59,011,010,511,513,515,516,5

25,034,038,046,551,562,072,076,5

4x4x4x5x5x5x5x5x

Mechanical locking kelly bar – Ø 355 mmelements

nolength

mdepth

mweighttonn

heightm

2,42,93,33,94,35,1

5,05,05,04,65,04,6

6,07,59,011,09,011,0

19,025,032,039,040,048,0

4x4x4x4x5x5x

Friction kelly bar – Ø 355 mmelements

nolength

mdepth

mweighttonn

heightm

mmmm

kNmrpmrpmkNkN

typeBHPkN

tonstons

150048 (with 5x11 kelly bar)38,5 (with 4x11 kelly bar)

1304215313356

CUMMINS QSB5.9200 @ 2200 rpm

123.7 / 101.83534

mmmkN

tons

75013-638031

Max pile diameterMax pile depthMax nominal extraction forceTransport weight

Continuous Flight Auger (CFA)

LARGE DIAMETER BORED PILE CONTINUOUS FLIGHT AUGER

Inside cabin view

Low overhead version Standard version

2500

2540

600

707 15

09

HYDRAULIC ROTARY RIG

A new model

R-312/200

1 - Undercarriage with expandable tracks from 2.5 to 3.7 m by means of hydraulic cylinders

2 - Turret c/w CUMMINS 6BTA55.9-C200diesel engine and sound proofed canopy,mounted on a 360° slew ring

3 - Winch assembly

4 - Parallelogram system allowingworking radius adjustment alwaysmaintaining the mast in vertical position.C/w electronic device for automatic stop

5 - Self-erecting mast composed by an intermediate element 11.9 m long and

a top element 3.5 m long. The max torquecan be applied all over the mast length

6 - Sheave cathead

7 - Crowd system by means of 3.5 mhydraulic cylinder

8 - Rotary head with 3 drilling speeds and one high spin off speed. The max torque is obtained for each drilling speed

9 - Telescopic kelly bar with guide to mast available with friction or mechanical locking type

3 12

5

7

9

8

6 R-312/200 R-312/200

CFA 360° versionCFA standard version

Transport Condition Transport Condition

Working Condition Working Condition

1050

0

5250

1932

2550

1267

2553

3500(3000+3500)

4500

2256

3198

3500

PU

LL D

OW

N S

TR

OK

E

395 750

890

1778

4 1049

0 8646

830

3500 (MIN. 3000) 3621

885

6000

ø 750

750

2490

0

1660

0

1350

0M

AX

DE

PT

H: 1

3000

(19

000)

EXTENDED TRACK WIDTH 3700 mmSHOE WIDTH 600 mm

3500(3000÷3500)

45103500

520 94

0

6000

2174

2

1622

8

1300

0M

AX

DE

PT

H: 1

2500

+60

0045

0 500

3950MIN. 2750 MAX. 3950

344

3710

3666

795

2540

3277

1652

952

3269

1199

4510

1360

1986

4311

885

1279 16

52

12090

1474

718

1870

WEIGHT: 1000 kg

3426

1652

952

1199

3269 4510

WEIGHT: 33000 kg

12119

1397

3254

4340

795

852 16

49

Max pile diameterMax pile depth

Max nominal torqueMax drilling speedSpin off speedMain winch nominal line pullAuxiliary winch nominal line pullEnginePowerCrowd systemOperating weightTransport weight (c/w kelly bar)

4

After the success of the R-312 HD Soilmec introduces the new model R-312/200 performing:- bored piles with dry drilling or bentonite mud- continuous flight auger piles (CFA)

The main features of the R-312/200 are the following:- new powerful rotary- high speed drilling- easy transport: it can be transported with rotary and kelly bar installed- compliance with the machine laws for safety standards- total reduction of rig up time, about 20 minutes from arrival to the job site- easy to use and handle- low operating costs- wide range of accessories (depthmeter, inclinometer, air conditioning, free fall winch)

The nominal values are referred to 100% total efficiency.

Large diameter bored pile

Standard dimension of tool connection is 130x130 mm / H

=

kelly stub height from ground level

2,93,33,98,59,010,311,512,2

5,05,04,68,38,36,764,773,86

7,59,011,010,511,513,515,516,5

25,034,038,046,551,562,072,076,5

4x4x4x5x5x5x5x5x

Mechanical locking kelly bar – Ø 355 mmelements

nolength

mdepth

mweighttonn

heightm

2,42,93,33,94,35,1

5,05,05,04,65,04,6

6,07,59,011,09,011,0

19,025,032,039,040,048,0

4x4x4x4x5x5x

Friction kelly bar – Ø 355 mmelements

nolength

mdepth

mweighttonn

heightm

mmmm

kNmrpmrpmkNkN

typeBHPkN

tonstons

150048 (with 5x11 kelly bar)38,5 (with 4x11 kelly bar)

1304215313356

CUMMINS QSB5.9200 @ 2200 rpm

123.7 / 101.83534

mmmkN

tons

75013-638031

Max pile diameterMax pile depthMax nominal extraction forceTransport weight

Continuous Flight Auger (CFA)

LARGE DIAMETER BORED PILE CONTINUOUS FLIGHT AUGER

Inside cabin view

Low overhead version Standard version

2500

2540

600

707 15

09

R-312/200HYDRAULIC ROTARY RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t

R-312/200HYDRAULIC ROTARY RIG

In 1990 Soilmec was awarded the certification of its own

Quality System to ISO 9001/UNI 29001 series standards.

CERTIFIED QUALITY SYSTEM

SOILMEC distributes machinery and structures all overthe world, supported by SOILMEC subsidiary companiesand representative offices as:

SOILMEC LTD - U.K.SOILMEC MISR S.A.E. Co. - EgyptSOILMEC (H.K.) Limited - Hong KongSOILMEC JAPAN CO LTD - JapanSOILMEC MALAYSIA - MalaysiaSOILMEC S.P.A. - Beijing Repr. Office - P.R. ChinaSOILMEC FAR EAST PTE.LTD - SingaporeSOILMEC EMIRATES - U.A.E.SOILMEC GULF - U.A.E.

SOILMEC S.p.A.Ground Engineering Equipment5819, via Dismano47023 Cesena (FC) - Italytel. +39-0547-319111fax +39-0547-318548http:// www.soilmec.ite-mail: soilmec@soilmec.it

G r o u n d E n g i n e e r i n g E q u i p m e n tG r o u n d E n g i n e e r i n g E q u i p m e n t