ERKE Group, Soilmec SM-8G Anchoring

8/7/2019 ERKE Group, Soilmec SM-8G Anchoring

1/12

SM-8GHydraulic Microdrilling Rig

SM-8GSOIL INVESTIGATION

CORING

MICROPILES

JET GROUTING

TOP HAMMER


2/12

Safety

Designed to comply with EN and ISO safety

standards.

SM8G is manufactured, tested and certified

to give maximum operator protection

Hydraulic board control and remoteboard control (on request) are designed

for operator comfort and ease of use

Built-in safety devices in order to reduce

any possible accidental operation

Operators view is increased to give

a better visibility and guarantee the

maximum safety condition.

Easy and safe accessibility to the bonnet

for maintenance and inspection

Reduced environmental impact with

lower noise levels, reduction in exhaust

emissions and improved fuel economy

Performances

Versatile multipurpose rig for a wide range

of possible civil engineering applications.

The use of powerful engines, high

standard components and advanced

circuit design has enabled Soilmec to

increase performance and reliability

under extreme conditions.

Range of high performance rotaries

available.

The choice between different

combinations of mast length makes the

rig easily adaptable to several headroomcondition

Smart and compact design for fast

assembly and easy transport.

Minimum operating cost.

The Soilmec advantage

A real multifunctional machine designed

from scratch to give you the best drilling

solution

Long life expectancy with a high residual

value

Best price/performance ratio Built with customer in mind

Quality

Each micro drilling rig is subject to

extensive testing prior to dispatch.

Soilmec Quality System complying with

ISO 9001:2000 and ISO 14001:2004

standards.

Low maintenance requirements thanks to components of the highest quality.

Soilmec constant support thanks to

quick acting after sales service, reliable

customer care, efficient spare parts

service and fast delivery.


3/12

Deutz TCD 2012 L04Power @ 2000 rpm 85 kW 114 HP

Operating weight (approx) 8200 kg 18078 lbs

Feed / retraction force 100 kN 22480 lbs

Max rotary rpm 822@51 daNm 822@369 lbf.ft

5

7

6

4

1 23

1

5

3

7

2

6

4

Undercarriage

Machine Body

Control Board

Rotary

Breaker

Clamp

Mast


4/12

VERTICAL CONFIGURATION

SM8G is a new multipurpose drilling

rig dedicated to soil exploration and

geotechnical purposes meeting all CE

safety standards for hydraulic rig.

Thanks to high versatility of its equipments,

SM8G can support most drilling methods

on your jobsite: wire-line and conventional

continuous diamond coring; as well as DTH

and top-hammer drilling; and drilling methods

like TUBEX, ODEX and SIMMETRIX.Its special and optimized rotary assembly

allows to SM8G to be particularly suitable to

reach high drilling speed (926 rpm) for great

performance.

The Cylinder crowd system, hoist force: 100

kN, finds no comparison in the market when

compact rigs are taken into consideration.

Hydraulic side shifting of rotary drive allows

a clear access to the drill hole and a easier

loading rods.

Hydraulic standard clamp and breaker (60-

260mm) for quickly and safely making and

breaking rod joints.

Ergonomic drilling control board is connecton rig to guarantee the best view of the drill

hole.

Optional:

Fully automatic SPT hammer for testing

and sampling mounted on board.

On board triplex water/mud pump

capable of delivery of 200 l/min @ 45bar

Safety cage with low speed and low

torque kit

Different Higher torque rotary heads

Cable remote control for rig tracking

Jet grouting kit capable to reach 12m oftreatment in single pass.


5/12

MAIN FEATURES

Soilmec rotaries, designed and

manufactured to meet the need for

increased production and performance

on various applications, with the added

benefit of increased component life and

reliability.

Heavy duty mast design

Fixed kinematic mechanism complete

with special side tilting of +/-13

High hoist force by cylinder

Hydraulic service winch with 2000 daN

line pull

Foam pump and oil lubricator fitted on

standard composition

Automatic SPT, wire-line and mud pump

are available on request

Designed to be particularly versatile for

different drill-methods.

Easy conversion in jet grouting

configuration


6/12

TECHNICAL DATA

Operating weight : 8350 kg 18408 lb

Hydraulic Rotary head

Reccomended: HR9G HR10L HR10GL

Mast assembly

Rod lenght type (c/w one rotary head) 3 m 9,8 ft

Hoist & Feed system

Feed type Cylinder

Feed stroke 3750 mm 147 in

Maximum hoist pull 100 kN 22480 lbf

Maximum feed force 73 kN 16410 lbf

Service winch complete with jib

Line pull (1st layer): 20 kN 4496 lbf

Rope diameter: 10 mm 0,4 in

Clamp & hydraulic joint breaker

Nominal size 60-260 mm 2,6-10,2 in

Maximum clamping force 125 kN 28100 lbf

Maximum breaking torque 4100 daNm 30239 lbf.ft

Jet grouting

Rod diameter 90 mm 3,5 in

Max treatment depth in single pass 12 m 40 ft

Operative weight in jet configuration 9200 kg 20282 lb

Fully automatic SPT hammer for testing and sampling

mounted on board.

On board triplex water/mud pump capable of delivery of 200

l/min @ 45bar

Safety cage with low speed and low torque kit

Different Higher torque rotary heads

Cable remote control for rig tracking Jet grouting kit capable to reach 12m of treatment in single

pass.

Top hammer kit

Standard Equipment Optional Equipment

Rotary head HR9G type complete with Rollstar gear box (max

drilling speed: 926 rpm)

Heavy duty drill mast with 3750 mm stroke

Clamp and breaker 60-260 mm

Mast side tilting +/- 13

Mast forward tilting of 7,7

Service winch complete with jib Foam pump

Inline air lubricator

Pressure washer

Prearrangement for mud pump


7/12

HR9G Model Rollstar

Type 6 gear box 6 gear box

Max torque 822 daNm 6063 lbf.ft

Max speed 926 rpm 926 rpm

Hollow shaft 90 mm 3,5 in

Gear box type 3 mechanical + 2 mechanical shift gears 3 mechanical + 2 mechanical shift gears

HR10G Model Volvo

Type Variable Variable

Max torque 1063 daNm 7840 lbf.ft


Hollow shaft 76 mm 3 in

Gear box type 2 mechanical + variable motor 2 mechanical + variable motor

HR10GL Model Volvo

Type Variable VariableMax torque 1024 daNm 5133 lbf.ft


Hollow shaft 90 mm 2,6 in

Gear box type 2 mechanical + variable motor 2 mechanical + variable motor

TECHNICAL DATA - ROTARY DRIVE


8/12

TECHNICAL DATA

Diesel Engine*

Model Deutz TCD2012-L04 Deutz TCD2012-L04

Rated output ISO 3046-I 85 @ 2000 rpm 114 HP

Engine conforms to Exhaust emission Stan-dard

UE 2004/26/CE Stage IIIA - US EPA

nonroad Tier 3

UE 2004/26/CE Stage IIIA - US EPAnonroad Tier 3

Diesel tank capacity 130 l 34,3 US gal

Sound power level & Sound pressure level LWA 115 - LpA 81 dB(A) LWA 115 - LpA 81 dB(A)

Hydraulic systemMain pumps: variable axial pumps L.S. 149 /min 39,4 US gal/min

Set pressure main pumps 25 MPa 250 bar

Auxiliary pumps: gear pumps 71+46+29+23 l/min 18,8+12,2+7,7+6,1 US gal/min

Hydraulic oil tank capacity 300 l/min 79,3 US gal

Undercarriage (not extendable crawler)

Chain class and pitch ** steel steel

Track shoe width 300 mm 11,8 in

Overall length 2475 mm 97,4 in

Overall width 1900 mm 74,8in

Traction force 45 kN 10116 lbf

Travelling speed 2,36 km/h 1,5 mi/h

Average ground pressure 0,071 MPa 0,7 bar* Electrical engine is available on request** Rubber track is available on request


9/12

TRANSPORT DATA

Mass & Transport

Transport width 1900 mm 74,8 in

Transport height 2345 mm 92,3 in

Transport length 6020 mm 237 in

Transport weight 8350 kg 18408 lb


10/12

SM3 * SM5 * SM5G * SM8 * SM8G * SM8GT *

Weight Weight Weight Weight Weight WeightOperating weight: 3,5t

+2,5 t

Operating weight: 5,6 t Operating weight: 5,5 t Operating weight: 8,5 t Operating weight: 8,3 t Operating weight: 9 t

Rotary Rotary Rotary Rotary Rotary Double Rotary

Max torque: up to 2000

daNm

Max torque: 972 daNm Max rpm: 862 @ 696

daNm


daNm

Max torque: 1663 daNm


Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system

Hoist force: 40 kN Hoist force: 40 kN Hoist force: 60 kN Hoist force: 60 kN Hoist force: 100 kN Hoist force: 100 kN

Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke

Max feed stroke: 2400

mm


mm


mm


mm


mm


mm

Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly

Range: 50-220 mm Range: 50-220 mm Range: 50-220 mm Range: 60-260 mm Range: 60-260 mm Range: 60-260 mm

Engine Engine Engine Engine Engine Engine

Separeted diesel power

pack 85 kW

Deutz TCD2011-L04 W

diesel engine 72 kW

Deutz TCD2011-L04 W

diesel engine 72 kW

Deutz TCD2012-L04

diesel engine 85 kW

Deutz TCD2012-L04

diesel engine 85 kW

Deutz TCD2013-L04 2V

diesel engine 116 kW

Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology

Micropiles - Anchorings Micropiles - Anchorings -

Tunnelling

Soil investigation -

Micropiles

Micropiles -

Anchorings


Micropiles

Geothermal - Double

rotary

Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available

Jet grouting -

Soil investigation

Jet grouting - Soil investi-

gation -

Top Hammer

Jet grouting -

Top Hammer

Jet grouting - Soil investi-

gation -

Top Hammer

Jet grouting -

Top Hammer

SOILMEC MICRODRILLING RIGS

* by Puntel


11/12

SM14 SM16G * SM16GT * SM20 * SM21 SM30

Weight Weight Weight Weight Weight WeightOperating weight: 14 t Operating weight: 16 t Operating weight: 17 t Operating weight: 21 t Operating weight: 22 Operating weight: 33

Rotary Rotary Rotary Rotary Rotary Rotary


daNm



Max torque: 2160 daNm Max torque: 3650 daNm Max torque: 3650 daNm

Crowd system Crowd system Crowd system Crowd system Crowd system Crowd system

Hoist force: 89 kN Hoist force: 195 kN Hoist force: 195 kN Hoist force: 83 kN Hoist force: 141 kN Hoist force: 120 kN

Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke Rotary stroke


mm


mm


mm


mm


mm


mm

Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly Clamp assembly

Range: 60-415mm Range: 60-320 mm Range: 60-320 mm Range: 50-360 mm Range: 60-415mm Range: 60-415mm

Engine Engine Engine Engine Engine Engine

Cummins QSB 4.5






Deutz TCD2012-L06




Cummins QSB 6.7


Primary technology Primary technology Primary technology Primary technology Primary technology Primary technology

Micropiles -

Anchorings


Micropiles

Geothermal - Double

rotary

Micropiles -

Anchorings

Micropiles -

Anchorings

Jet grouting

Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available Optional kit available

Jet grouting - Double

Rotary - Top Hammer -

Vibro rotary

Jet grouting -

Top Hammer

Vibro rotary Jet grouting - Double

Rotary - Top Hammer -

Vibro rotary

Jet grouting - Double

Rotary - Top Hammer

Micropiles -

Top hammer

SOILMEC MICRODRILLING RIGS


12/12

www.soilmec.it

Alltechnicaldataarepurelyindicativeandsubjecttochangewithoutnotice

10/2010-200-D/F-DigitalPrintRN-

IlDigitale

SOILMEC distributes machinery and structures all over the world, supported by SOILMEC subsidiary companies and dealers.

The complete Soilmec network list is available on the webpage www.soilmec.it

Documents

ERKE Group, Soilmec SM-8G Anchoring