Upload
lykhue
View
321
Download
10
Embed Size (px)
Citation preview
HUAWEI TECHNOLOGIES CO., LTD.
SmartAX MA5612 and MA5616
Huawei SmartAX MA5612 and MA5616 are leading remote Multi-Dwelling Unit (MDU) products,
which provide various types of ports on the Passive Optical Network (PON) and meet multiple service
requirements. These products mainly apply to Fiber To The Curb (FTTC) and Fiber To The Building
(FTTB) scenarios. In addition, they can satisfy some private line access requirements. Huawei MA5612
and MA5616 feature wide temperature range, low power consumption, silent design, high-density
access, reliable performance, and energy savings, and can be installed in multiple scenarios, such as
the desk, corridor, and cabinet.
Product Appearance
MA5612MA5616
• High-density access: An MA5616 supports a maximum of 256 POTS users, 128 ADSL2+ users, 192 VDSL2 users, or 64 FE users.
• Flexible service configuration: Service boards can be inserted in any slot. Various types of ports can be flexibly configured
for multiple application scenarios. In addition, combo boards are supported, which effectively improve access density, save
equipment room space, and simplify cabling.
• Support for multiple clock synchronization technologies, such as synchronous Ethernet, E1 line clocks and GPON line clocks.
Highlights
Family broadband service scenario: In the upstream direction, the MA5612 connects to the optical line terminal (OLT) through the
gigabit passive optical network (GPON). In the downstream direction, the MA5612 connects to a PC by using the category-5 cable
to provide high-bandwidth broadband, voice, and video services and connects to a telephone by using twisted pairs to provide plain
old telephone service (POTS) services.
Enterprise leased line scenario: For a traditional private branch exchange (PBX) and router, the MA5612 provides a TDM E1 port to
transmit leased line services to the OLT by using the native TDM technology. The MA5612 also provides a primary rate interface (PRI)
that converts E1 frames transmitted by the PBX to Session Initiation Protocol (SIP) or H.248 packets and transmits them to the OLT.
For an IP PBX and router, the MA5612 provides an FE or GE port to transmit leased line services to the OLT by using the virtual local
area network (VLAN) transparent transmission technology.
The MA5616 provides two GPON or GE uplink ports and provides multiple services by supporting flexible board configurations. The
MA5616 provides broadband, voice, and video services through ADSL2+/ VDSL2/FE boards, voices service through POTS boards,
leased line services through SHDSL or P2P boards.
Application Scenarios
OLT
GPON
MA5612
E1
FE
FE/GE
POTS
P2P/FE
ADSL2+/VDSL2
MA5616
iManager U2000
NGN / IMS
PBX
IP PBX
IP Router
phone
Enterprise
Home
IP/MPLS
• Perfect voice features, supporting basic services (voice service, fax service, and modem service) and supplementary services
(three-way calling, call waiting, call transfer, calling line identification presentation, and calling number restriction)
• Efficient Operation, Administration, and Management (OAM): The MA5612 and MA5616 support remote configuration
delivery and, therefore, do not require on-site commissioning. In addition, they support plug and play, remote monitoring, and
maintenance functions.
• Plug-and-play (PnP) service provisioning: The MA5612 allows remote issuing of configuration. A management channel and service
channel are created after the MA5612 is powered on and registers successfully. Manual onsite configuration is not required.
• High reliability: The MA5612 and MA5616 supports the working temperature from -40°C to 65°C, 6 kV lightning protection,
and corrosion-proof design of boards.
• Energy saving: Huawei reduces system power consumption via efficient power supplies, reduces power consumption of idle
boards by supporting intelligent fan speed adjustment, reduces chip power consumption using high-performance chips, and
reduces port power consumption by supporting POTS short-loop design.
GPON
ITU G.984-compliance
32 T-CONTs
1000 GEM ports
Broadband
4K VLANs, supporting QinQ and stacking VLANs
4K MAC addresses, supporting VMAC
VLAN switching
Conversion from PPPoA to PPPoE and from IPoA to IPoE
802.1p, supporting PQ and WRR flow control, and ACL
Voice
SIP and H.248
ISDN BRA port
POTS short-loop design
ADSL2+
Compliance with ITU-T G992.1 to G992.5, and T1.413
Annex M
ADSL2+ bonding (2-wire, 4-wire, 6-wire, or 8-wire)
VDSL2
G993.2-compliance
8a, 8b, 8c, 8d, 12a, 12b, 17a, and 30a profiles
2-wire VDSL2 bonding
SHDSL
G991.2-compliance
G.SHDSL.Bis, supporting ATM and PTM
EFM bonding (2-wire, 4-wire, 6-wire, or 8-wire)
Multicast
IGMPv2 and IGMPv3
IGMP proxy and IGMP snooping
A maximum of 1024 configurable multicast programs in the systemA maximum of 256 multicast usersA maximum of 16 concurrent multicast programs for each user
Security
PPPoE+ and DHCP option82
Static and dynamic MAC address binding
Anti-MAC and anti-IP spoofing; source MAC address and IP address filtering
Anti-DoS attack and firewall
Maintenance and management
SNMPv1, SNMPv2, and SNMPv3
Telnet and SSHv2
Remote and batch pre-deployment
Remote upgrade and monitoring
Key Features
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE
ANY KIND OF WARRANTIES.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Version No.: M3-039776-20141205-C-1.0
www.huawei.com
Specifications
Product Appearance
MA5612
MA5616
Dimensions (Width x Depth x Height)
442mm x 245mm x 43.6mm 442mm x 245mm x 88.1mm
Network-Side Port
Available configuration modes: • 2 x GPON• 2 x GE (optical)• 1 x GE (optical) + 1 x GPON
Control boards: CCUB: GPON/GE, 1*GE (either optical or electrical)CCUC/CCUE: GPON/GE, 1*GE (either optical or electrical)
User-Side Port
The MA5612 is a device in which service boards are mountable. Specifically, the MA5612 supports fixed configurations and two additional slots for board insertion. Two types of fixed configurations are supported: 2 x GE (electrical) + 6 x FE (electrical)2 x GE (electrical) + 6 x FE (electrical) + 16 x POTSThe two slots can house the following boards: 8 x FE (electrical) board16 x POTS board8 x E1 board
MA5616 has 4 service boards, There are 13 kinds of card type: ASRB: 328POTS; ASPB: 64*POTSDSLD: 8*ISDNADLE: 32*ADSL2+; ADPE: 64*ADSL2+CALE: 32*ADSL2+ +32*POTSCVLC/CVLE: 32VDSL2+32POTSCCME: 48VDSL2+48POTSEIUA: 16*FE; EIUD: 4GE (optical/electrical) +4FE (optical)VCLE: 32*VDSL2, VectoringVCPE: 64*VDSL2, 8a, 8b, 8c, 8d, 12a, 12b, 17aVDGE: 16*VDSL2, 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30aVDSH: 24*VDSL2, 8a, 8b, 8c, 8d, 12a, 12b, 17aVDTH: 24*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aVDSE: 24*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aVDLE: 32*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aVDLF: 32*VDSL2(ISDN), 8a, 8b, 8c, 8d, 12a, 12b, 17aSHLH: 16*SHDSL, ATM SHDHL, EFM SHDHLEDTB: 8G.SHDSL +8E1
Working Temperature-40°C to 65°C; -25°C in case of equipment starting
-40°C to 65°C; -25°C in case of equipment starting
-40°C to 65°C; -25°C in case of equipment starting
Ambient Humidity5% Relative Humidity (RH) to 95% RH, non-condensing
5% RH to 95% RH, non-condensing 5% RH to 95% RH, non-condensing
Lightning Protection Capability
GE/FE: 6 kV; POTS: 4 kV GE/FE: 6 kV; POTS: 4 kV GE/FE: 6 kV; POTS: 4 kV
Power SupplyAC: 220 V/110 VDC: -48 V
AC: 220 V/110 VDC: -48 V
AC: 220 V/110 VDC: -48 V
Backup Power Supports 12 V backup power.Supports 48 V backup power. Supports lead-acid and Fe-lithium batteries.
Supports 48 V backup power. Supports lead-acid and Fe-lithium batteries.
Weight3.7 kg (empty chassis)4.22 kg (full configuration)
4.8 kg (empty chassis)7.2 kg (full configuration)
4.8 kg (empty chassis)7.2 kg (full configuration)