Upload
lekhue
View
218
Download
3
Embed Size (px)
Citation preview
EPAct
CO M P LIA N T
Alum.
Signature Series™
& Ultimate E®
Motors, High
Performance
& Premium
Efficiency
AluminumAnd Steel TEFC & ODPMotors
Ultimate E or Signature Series: High Performance and Pr
Beyond Energy EfficientLincoln Ultimate E®‚ and Signature Series™ motorsprovide both premium energy efficiency and out-standing performance. They comply with or exceedthe energy efficiency requirements of the UnitedStates and Canada for general-purpose motors whiledelivering new levels of starting torque, overloadcapability, application versatility, and reliability.
More Starting TorqueUltimate E and Signature Series motors provideexcellent starting torque. In fact, most models havea starting torque rating which is normally associatedwith specialty designs such as NEMA Design C! Fordependable "get-up and go" capability with off-the-shelf availability, get a Lincoln Ultimate E orSignature Series motor.
More Overload CapacityWith an industry-leading service factor on mostmodels*, Ultimate E and Signature Series motorsprovide peace of mind in uncertain situations.Whatever comes their way, these motors deliver theoverload assurance to let you rest easy.
SPEED (RPM)
TORQ
UE (%
of F
ull L
oad)
0
75
150
225
300
300 600 900 1200 1500 1800
SPEED-TORQUE CURVE50 HP 1800 RPM TEFC
Ultimate E2® Motor
NEMA Design C
NEMA Design B
1.25 Service FactorSpeed(RPM)
TEFC ODP
3600 1 to 75 HP 1 to 200 HP1800 1 to 75 HP** 1 to 200 HP1200 1 to 50 HP 1 to 75 HP
* See LC100 catalog for details.** Ultimate E2: 1 to 60 HP.
Beyond Effic
Lincoln Motors Deliver remium Efficiency
AluminumAnd Steel TEFC & ODPMotors
More Operating VoltagesUltimate E and Signature Series motors are name-plated for a variety of operating voltages that canreduce your inventory requirements.
• all 230/460 Volt, 60 Hz models are nameplatedfor 208 Volt, 60 Hz operation*.
• most 230/460 and 460 Volt, 60 Hz motors arenameplated for 50 Hz operation* on 380 and/or415 Volts.
Vary the Speed, Reap the BenefitsEveryone knows the potential benefits of usinginverter or variable-speed drives. For that reason,most Ultimate E and Signature Series motors(230/460 and 460 Volt, 60 Hz ) are Inverter-Rated* for use with any brand drive and at any carrier frequency. And to make matters as simple and inexpensive as possible, filters and power conditioning devices are not required.
Precedent-Setting Warranty ProtectionExpect ultimate reliability from your LincolnUltimate E or Signature Series motor. For over 15 years, Lincoln has backed its motors with a precedent-setting five-year warranty (on sine-wavepower. See LC100 catalog for warranty informationon inverter-power). No other motor manufacturerhas expressed as much confidence in the design,manufacturing quality or performance of its motors.Warranty claims are handled on the spot throughour wide network of conveniently located Lincolnauthorized warranty shops.
ient.
Ventilation Systems That Get Rid Of Heat FastHeat kills motors. A cool-running motor lasts longer because its insulation system lasts longer. In fact, every 10°C drop in operatingtemperature doubles the expected life of the insulation. Toremove heat fast, Lincoln utilizes extruded aluminum frames inTEFC sizes 182T-286T and stagger-stacked laminations in TEFCsizes 324T-449T and in ODP, 284T-449T.
Aluminum is a great heat sink. In fact, it pulls heat awayfrom motor windings four times faster than cast iron orsteel. The extrusion process enhances aluminum’s heatconducting properties by allowing the frame sections tohave thinner fins placed closer together. The result is morefins and greater surface area for maximum cooling.
Five YearWarranty
Innovative Engineering and MTake These Motors Beyond
Unique Stagger-Stacked Laminations Increase CoolingSuccessive layers of square laminations are shifted orindexed during stator manufacture. In steel TEFC motors,ambient air is blown at high velocity through a channelformed by the motor’s innovative double shell configura-tion. The lamination stack protrudes into the channel. InODP motors, ambient air is drawn into the motor at both
ends, is circulated over andaround the entire laminationstack and is exhausted outthrough the sides. Both enclosures demonstrate a very effective heat transfer system due to direct contactbetween the heat source and the cooling medium.
An Insulation System Second to None!All insulating materials used in the manufacture of Lincolnmotors have a thermal rating of Class F, H or higher.
Lincoln employs quality varnishes to further enhance theinsulation system and maximize electrical life.
Superior insulating materials lengthen motor life
3 5 7.5 10 15 20 25 30
70
60
80
90
100
110
120
130
140
150
160
Tota
l Tem
pera
ture
(°C
)
Ultimate E1 MotorsUltimate E2 Motors
40 50 60 75 100 125 150 200 250 300 350 400
130°
155°130°
155°CLASS B
CLASS F
Horsepower (1800 RPM)
Aluminum Frame Motors
Steel Frame Motors
Where Used Thermal RatingU-top, slot Class F - 155°C
phase insulation above Class H - 220°C
U-top, slot divider Class H - 180°C
sleeving to cover lead Class F - 155°Cto coil connection
windings above Class H - 200°C
We Haven’t Forgotten the Importanceof the Bearing SystemA bearing’s life is shortened by friction and
heat. Dust, dirt or other contaminantsdamage ball and race surfaces. If a
bearing fails, good chance the motorfails, too. Lincoln uses:• double-shielded deep-groove
ball bearings• moisture-resistant
polyurea lubricant • slingers on all drive shafts
and on the fan end of TEFC motors(competitors use them only on their
severe duty motors)
Lincoln Steel Frame Motors: They Don’tCome Any More Durable Than ThisFirst, a little metallurgy: the yield strengthof steel is higher than the ultimate strengthof cast iron. This makes steel muchstronger and 250% more rigid than castiron. Cast iron is perceived as a ruggedmotor frame material because of its bulkiness, when in reality its relativelyfragile nature requires 2-1/2 times as muchmetal to approach the performance ofsteel. And when it comes to impact loads, steel provides much greater resistance to cracking.
A Steel Frame with Foot Flatness to Rival the Best Cast Iron FramesLincoln’s quality manufacturing techniquesproduce steel frame motors that meet thedemanding IEEE 841 specification for footflatness (to 0.005"). All of our steel motorsfrom 284T and up meet this spec, whichwas written for top-of-the-line cast ironframe motors.
The Best Way to Describe Lincoln’sAluminum Frame Motors: ToughWe use an extruded aluminum alloy forour frames- not cast aluminum. The extru-sion process provides dense sections freefrom slag inclusions, porosity and otherdefects which reduce the physical perform-ance of cast aluminum frames. In addition, extruded aluminum when compared tocast iron or cast aluminum has a greaterresistance to cracking under impact loads.Extruded aluminum cooling fins will bendwhen struck; cast iron fins tend to break.Plus, the natural corrosion resistance ofextruded aluminum is far superior to castaluminum at slowing degradation from chemical attack.
Materials Selectiond Mere Efficiency
AluminumAnd Steel TEFC & ODPMotors
Talk about durability! An integratedsteel producer uses dozens of Lincolnaluminum frame inverter-fed ACmotors on its 84" holding table. Chosenfor their performance capabilities, theyhave dramatically outlasted the DCmotors they replaced.
Aluminum Motors Take theHeat at Steel Mill
Motors For Special SerWASH-THRU
CRUSHER DUTYBelt Me (I can take it); Lincoln Crusher Duty Motors Meet the Demands of the Aggregate Products IndustryLincoln Crusher Duty motors are designed for the severe belted-load applications found in size reduction equipmentsuch as rock crushers, pulverizers and conveyors. Thesemotors also have the "get up and go" capability necessary tostart aggregate industry equipment and the overload capability to keep it going.
• rugged, welded heavy-gauge steel frames
• drive-end roller bearing and hi-strength 4340 steel shaft
• horizontal or vertical shaft down mounting
• inverter-rated
• over temperature protection – three Class F
thermostats
• two levels of energy-efficiency available
• across-the-line, y-delta/start-delta and
part-winding start capability
For Extremely Harsh Environments;Pressure Encapsulated Windings Keep ‘Em GoingWhere moisture and contaminants are a real problem, youshould consider a Lincoln Wash-Thru™ motor. Unlike conventional "washdown" motors…which attempt to seal outthe elements…our Wash-Thru motors have completely pressure encapsulated windings. This isolates the motor component most vulnerable to moisture damage. Service lifehas been demonstrated to be up to 800% greater than motorsdesigned for washdown use. Wash-Thru motors can providean improvement in plant efficiency and a reduction in maintenance costs due to an increase in process up-time.
• drop-in replacement for TEFC and
TENV "washdown" motors
• full length 303 stainless steel shaft
• high quality double-sealed bearings and
v-ring shaft slinger
• stainless steel nameplate
• FDA approved white finish paint
EPAct
CO M P LIA N T
CSA Qualified Testing Lab
rvice Conditions General SpecificationsTEFC Frame SizesSignature Series143T-215T (steel)Ultimate E182T-286T (extruded aluminum)324T-449T (steel)
ODP Frame SizesSignature Series143T-256T (steel)Ultimate E284T-449T (steel)
Horsepower Range1-400 (TEFC)1-500 (ODP)
Speeds3600, 1800, 1200, 900 RPM
Service Factor1.25 on most ratings(see LC100 catalog for details)
Insulation SystemPremium Class F
DesignB
Windings100% copper200°C
BEARING SIZES (SINGLEEXTENSION) FOOT MOUNT
Frame Size DE Opp DE
182T-184T 207 205
213T-215T 208 206
254T-256T 309 208
284T/TS-286T/TS 310 209
324T/TS-326T/TS 311 309
364T/TS-365T/TS 313 311
404T/TS-405T/TS 315 313
444T/TS-449T/TS 318 315(1800 & 1200 RPM)
444TS-449TS 315 315(3600 RPM)
Fractional HP Motors from Lincoln – An Exceptional Value
• ideally suited for industrial and
commercial applications
• single- and three-phase AC
• durable rolled steel frame
• 48 and 56 frame sizes
• 3600, 1800 and 1200 rpm
• washdown, brake and explosion-proof
models available
• made in U.S.A.
AGRICULTURELong Life Signature SeriesMotors for Farm andAgricultural ApplicationsThis season, upgrade yourAgricultural or Farm Dutymotor to a Lincoln.
• aeration fan
• agriculture fan
foot mount-belt drive
PSC variable speed
direct drive-thru bolt
resilient base-thru bolt
single and two speed
• auger drive
• crop dryer (1Ø & 3Ø)
• farm duty/agriculture
high torque (HT)
extra high torque (EHT)
• grain stirring
Frame Size DE Opp DE
143T-145T 205 203
182T-184T 206TEFC:205
ODP:203
213T-215T 307 206
254T-256T 309TEFC:207
ODP:208
Ultimate E
Signature Series
ODP Signature SeriesTEFC Signature SeriesExplosion-Proof Signature Series
ODPSignature SeriesUltimate E®
TEFCSignature SeriesUltimate E
Severe Duty TEFC Ultimate EIEEE 841 TEFC Ultimate EAutomotive DutyExplosion-ProofWash-Thru™& WashdownCrusher Duty Ultimate EAgriculture/Farm Duty Signature SeriesMetric Frames
Cleveland, Ohio 44092-2539 U.S.A. • 1-800-MOTOR-4-U • Fax: 1-216-731-5401
E-mail: [email protected] • Web: www.lincolnmotors.comUltimate E is a registered trademark and Signature Series is a trademark of Lincoln Motors,
Electrical Group, Regal-Beloit Corporation
Part of the Most Universal AC Motor Offering AvailableLincoln has single and three-phase motors for nearly any industrialand commercial application. And, with our extensive distributornetwork in the U.S. and Canada, we’ve got product and service nearyou. For your nearest Lincoln representative, call 1-800-MOTOR-4-U.
Cast Iron SteelExtruded Aluminum
Beyond Efficient.Horsepower
SinglePhase
ThreePhase
1/4 1/3 1/2 3/4 1 1.5 2 3 5 7.5 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 350 400 450 500 800
E60 4/01 ©2001 Lincoln Motors