Insatech A/S • Algade 133 • DK-4760 Vordingborg • Tel. +45 5537 2095 • www.insatech.com

People - Ideas - Solutions

Marine

Ship Energy Effi ciencyManagement PlanSEEMP

What, Why and How?Im

plem

entationIdentif

y P

otent

ial

Eval

uation Planning

IDENTIFYIMPROVEMENT

POTENTIAL

EVALUATEAND

UPDATE

ESTABLISHA

BASELINE

IMPLEMENTAND

MONITORMARPOL COMPLIANT

2 3

What is SEEMP?SEEMP will become mandatory for all vessels at their first renewal or intermediary survey after 1 January 2013. (IMO MEPC 62, July 2011)

• Under the proposed amendments to MARPOL Annex 6, Regulation 22, all ships must have an International Energy Efficiency Certificate (IEEC).

• The IEEC requires, amongst other things, the presence of a SEEMP on board.

• The SEEMP may form part of the ships Safety Management System (SMS).

Why SEEMP?• Implement a plan to improve the energy efficiency of a ships

operation. (Part of a broader corporate energy management policy.)

• Fuel cost is the largest cost element for shipping companies. 35-65% of operational costs depending on type of vessel.

• Energy efficiency improvements can give cost savings of 5-15% and bring down Greenhouse emissions

• Port fees based on environmental impact

• Global players are demanding emission data (DHL, IKEA ...)

Who should implement SEEMP?• SEEMP is a ship specific plan to be developed by the shipowner,

operator or charterer

• The plan should be adjusted for the characteristics of individual companies and ships

• SEEMP is a management tool and should limit the onboard administrative burden

SEEMP 4 steps to success

IMO Implementation guidelines

Planning• Current status of ship energy usage and the expected improvement

of ship energy efficiency is determined. Establish a baseline!

• Defi ne and prioritize initiatives

• Both ship internal processes and operational aspects should be covered. (Speed optimization, weather routing, hull maintenance, “just in time” etc.)

Identify• Define how the prioritized initiatives are to be implemented

on each ship

• Define the owner(s) of each measure

• Define each project with a start and end date

• Keep records to assist in self evaluation

Implementation• Ensure benefit realization! (Requires a well established baseline

with repeatable measurements)

• Continuous and consistent data collection is the foundation for monitoring.

• Performance monitoring that is standardized for the whole fleet is recommended. (EEOI)

• A good monitoring system should track the benefits of each prioritised initiative

• The burden on ships staff should be minimized

Evaluation• Progress of different improvement initiatives should regularly

be followed up

• Establishing well defined self-evaluation periods will give an understanding of cause and effect that will improve the efficiency of future investments.

• An understanding of the overall characteristics of the ships operation will result in a better prioritizing of future stages of the management plan.

• Self-evaluation and improvement• Evaluate the effectiveness of the implemented improvements

• Set new goals and implement the next cycle of the plan.

• SEEMP is not a static tool, but a continuous “work in progress”

Imp

lementation

Identify P

otent

ial

Eval

uation Planning

Identify how much you can save and just as importantly, what initiatives you needto undertake to realise the improvements.

The Progress of the various

improvement initiatives is used to modify future goals and

implement tactics.

It is important to examine data, tools and processes in order to determine a credible baseline from which goals, plans and actions grow.

Put the plan into action and track performance using

a variety of established systems and processes to

help overcome resistance to

‘new’ initiatives.

The Insatech approach to developing an effi cient SEEMP

A practical approach that is ”proven in use”

SEEMP planning• Establishing a good and repeatable baseline is the key for

implementation of SEEMP

• Define the requirements for data aquisition, ensuring the system is expandable to handle all future requirements

• Defi ne how data will be transferred from the vessel, data safety requirements, storage and use at HQ

• Minimize crew involvement i.e. automate data aquisition and transfer

• Start with ”the low hanging fruit” the largest energy consumers on board

Defi ning a good baseline• One approach is to use design documents or sea trial data

if these have the necessary values

• Main energy consumers are: Main engine(s), electrical production and boilers

• Define an operational profile including Routing (plan and weather), Trim, cargo operations, autopilot use etc.

The practical baseline• Start with ”the low hanging fruit” the largest energy

consumers on board.

• Evaluate the quality of the information currently available on board.

• Typical fuel flow measurement systems have low accuracy and repeatability that will make evaluation of the results a waste of time!

A practical approach to SEEMP

HFO/MDO

Flowmeter

Feederpump

Mixingtank

Boosterpump

Heater

ViscoSensesensor

Engine

Single flowmeter system

SEEMP System

HFO/MDOMixingtank

Feederpump

Boosterpump

Heater

Flowmeter

Engine

Flowmeter

ViscoSensesensor

Supply and return flowmeter system

Uni-fuel system

SEEMP System

HFO/MDOMixingtank

Boosterpump

HeaterFeederpump

Flowmeter

Flowmeter

Flowmeter

Engine

Engine

ViscoSensesensor

ShipsLog

GPSSEEMP System

Why SEEMP?• Ticket to trade

• Decision support

• Optimise operation

• Creates added value for shipowners if vessel performs above average

The Insatech SEEMP system

• Information display onboard in realtime

• Aid in on-board decision making

• Only useful information is sent to HQ

• Ensures responses by use of ”guidance system” for vessel operations

Data Aquisition System on board

4 5

Challenges to achieve repeatable fuel flow measurements• Most vessels are equiped with volumetric flowmeters

– typically a sliding vane meter• These have a full scale accuracy• Correct sizing is important.• Volumetric flowmeters need to compensate for density

variations as we require a readout in kgs or tons• Base density can vary up to 100 kg/m3! This is 10%

Lowering the uncertainty of flow measurements• Correct sizing of flowmeters• Calibration of temperature sensors• Manual input of the correct base density

in the flowcomputer!• Not practical!

The optimal solution for measuring fuel flow• Use a Coriolis massflowmeter that can handle

the vibrations and flow pulsations . (Not all designs can)• Pipe stress is a challenge for some types.• Uncertainty of a Rotamass system is:

0,1% of actual value• Density output can be monitored for alarming

of ”capuccino effect” in fuels

Data Aquisition• Use industrial grade systems that can handle the tough

environment found on board

• Challenges: Vibration, quality of power supply, ambient atmosphere, expandability

• Data collection speeds vary greatly, e.g. wave monitoring needs higher speed than COG

• Interconnectivity to other systems e.g. navigation systems (NMEA)

• Access to reports/KPI’s on board is a must

• Data compression and encryption to save costs

Advantages of the Insatech SEEMP Data Aquisition system• Minimises necessary data volumes without losing crucial

details. Event based detailing

• Open Industrial system for ease of integration to exsisting systems

• Built in Report functions

• Encrypted data – Read only format.

• Modular and expandable

• Manual inputs and local operator interfaces

Event based loggingThe use of event based logging ensures the detail required for the specefic channel, without collecting unnessesary data

KPI values in realtime

Built in report functions for on board use – influences behaviour• The built in report functions enable us to make locally

viewable reports that can be designed to have a positive influence on crew behaviour and decision making.

• No need to send data to HQ, make reports and send them out again.

• Strong mathematical functions allow real time calculated values to be displayed e.g. Tons fuel/NM/ton displacement

• Such values can be used to create new baselines for performance if wind and sea state values are compensated.

Minimising data• Even though all values are read e.g. every second,

we can minimise data amounts.

Important features for data retrieval• Automatic system sends encrypted Noon Reports. (Push)• Automatic archiving – based on vessel and time/data stamp• Conversion to ”open format” and use in standard systems

e.g. SQL databases

Influence decisions on board

Correct fuel consumption is vital

Realtime values on board infl uences crew behaviour

Trigger PointTrigger Level(Alarm)

Event Data

Thinning Data

(Standard Data / Interval) Pre Trigger

Tons Fuel/NM/Ton Displacement

9/20/2012 9:36 9/20/2012 10:04 9/20/2012 10:33 9/20/2012 11:02 9/20/2012 11:31 9/20/2012 12:00 9/20/2012 12:28 9/20/2012 12:57

On board fuel blender optimises costs. Event based logging gives detailed information when required.

Coriolis flowmeters accurately measures mass flow and density.

Fuel consumption in real time.On board fuel blender optimises costs.On board fuel blender optimises costs.

Minimizing data without loosing the details

Ne

w Ta

rget

Evaluate

Actio

n/C

ha

ng

e

Measure

Def

in

e/understand

The ”improvement loop”.

6 7

Speed Tests• We suggest the use of predefined speed tests where

the following factors are included:

– Speed and SOG (define current/wind influence)

– Displacement (wetted surface area and wind exposure)

– Wind speed, True and Relative (wind resistance)

– Sea state/wave height (WSA and WR)

– Rudder activity

– Defined minimum run times to ensure repeatability

Continous improvement is necessary• Define/understand -> Measure-> Action/Change-> Evaluate ->

New Target

• On board tools using real time consumption and performance figures against targets

• ”Drill down” functionality for main units or consumers.

• Power generation vs actual use and safety factors

• EEOI (Energy Efficiency Operational Indicator) tons CO2 / transport work – see IMO guideline

• EPI

• Costs

• Bunker composition

• Fuel costs and quality

• Selected fuel

Key Performance Indicators - KPI’s• We reccomend the use of KPI’s as the base for easy

comparison of performance.

• Use KPI’s to influence on board behaviour as well as for monitoring performance degradation.

• Easy acess to KPI’s with a strong graphic presentation, and warning/alarms can ensure due diligence on board

KPI main groups• Main engine performance (g/bkWh)

• Aux. engine performance (g/bkWh)

• Vessel performance:

• Thrust/displacement (if available)

• Fuel consumption (kg/NM/ton)

• Electrical power consumption per area

• Vessel Trim especially in Ballast mode

Overview of all relevant KPI’s giving decision support• Buffer time, idle time• Speed / RPM divation• Propeller & Hull maintenance• Weather effect• Lube oil consumption• Fuel statistics / Bunker• Fuel alerts• Anti-fouling evaluation• Speed / consumption prediction, speed optimization• Engine efficiency, engine utilization and optimizing• Energy profiles• Voyage optimization• Operational profiles• Warnings and triggers• Environmental statistics & EEOI

Screen menus• Voyage Performance

• Main & Aux Engine

• Energy Consumers

• Vessel Performance

• Fuel Management

• Environmental• Operations• Guidance / Warning• Boiler(’s) and Incinerator• Vessel KPI’s• Trends & Tests• Administration Setup

Credible measurements = Better decisions• For crew to take responsibility, it is important that the values

displayed are credible

• Take ”Raw” values” and normalise them for display. (Speed/Power curve to be normalised for displacement, wind speed/direction and wave action)

• Less scatter and a better aid in decision making

• Advisory messages e.g. best power plant configuration at the given operating conditions

Key features of the Insatech SEEMP System• Industrial proven in use components• Data transfer to shore minimised• Real time KPI’s on board• Built in guidance on board requiring crew acknowledgement

ensures actions are taken. If not the responsible crewmember can be found

Other features• Data accessible on board, HQ and ”home”• Ranking system for the fleet – competition = motivation

Decision support - on board as well!

KPI’s

14.000 15.000 16.000 17.000 18.000

Ship Speed (kis)

9000.000

8500.000

8000.000

7500.000

7000.000

6500.000

6000.000

5500.000

5000.000

4500.000

4000.000

Actualsituations

Referencesituations

250

200

150

100

50

0

CO

2 IN

DEX

(M

T)

DAYS

07-1

2

08-1

2

09-1

2

10-1

2

11-1

2

12-1

2

1501351201059075604530150

FO C

onsu

mpt

ion

mt/

24h

Days

0123456

07-1

2

08-1

2

09-1

2

10-1

2

11-1

2

12-1

2

Days

Mile

s pe

r To

n Fu

el O

il

Reference

Miles / mt FO

Operator panel with main menus, Speed test - graphic. EEOI – an IMO requirement – CO2 emissions.

Fuel consumption vs. speed.

Mileage per ton fuel vs reference.

07-1

2

08-1

2

09-1

2

10-1

2

11-1

2

12-1

2

1501351201059075604530150

FO C

onsu

mpt

ion

mt/

24h

Days

0123456

07-1

2

08-1

2

09-1

2

10-1

2

11-1

2

12-1

2

Days

Mile

s pe

r To

n Fu

el O

il

Reference

Miles / mt FO

CO2 emission reporting

8

In 2005 Insatech A/S became a part of the Addtech Group of companies – Addtech AB, Stockholm, and since the company was established in 1989, we have had a positive business development. Today we are nearly 50 employees.

Our mission is to be a trustworthy and competent partner, who supply technical solutions and engineering within process automation.

About us

Accredited Calibration:Conductivity (Master meter)

Analysis of gases:Ammonia - NH3 Moisture - H2O Oxygen - O2Carbon dioxide-CO2Carbon monoxide - CO Methane - CH4Hydrochloric acid - HCl Water - HO2

Analysis of liquids:Cell density Density Color Conductivity Concentration Carbon dioxide - CO2Live Cells Sound speed NIR Dissolved Oxygen pH Plato Protein Refractive index Turbidity Solids Viscosity

Analysis of solids:Moisture Fat Protein

Calibration:Flow Temperature Pressure Simulators

Control and Systems:DCS Systems Shut Down & security systems MES systems Blending Systems MID SolutionsSEEMP

Controllers:Auto-tuning Fuzzy-logic Single- and multi-loop

Flow Measurement:Bunker ControlBunker BlendingCustody transfer Coriolis massfl owDifferential - orifi ce/pitot tube Flowswitch Magnetic inductiveMechanical Rotameters V/A Thermal massfl ow Ultrasonic (Clamp-on and in-line)Vortex

Flow Measurement Solids:Microwaves

Level Measurement:ElectromechanicalDisplacement Hydrostatic pressure Capacitive Conductive Microwaves Radar Radiometric Ultrasonic Vibration

Pressure Measurement:Absolute Differential RelativeCalibrators Diaphragm sealLevel Pressureswitch

Registration & Data Collection:Data loggers Data Acquisition Systems GPRS - wireless transmission Recorders Paperless recorders

Single Use Technology:FlowPressureTemperatureUVConductivityLive CellsTurbidity

Services:Calibration: Flow - gases and liquids Conductivity pH Temperature PressureAccredited Calibration: Conductivity Temperature ElectricalService: Project Solutions Control / Periodic maintenance Services and inspections

Temperature:FlowPressureTemperatureUVConductivityLive Cell CountingTurbidity

Temperature:Calibrators Sensors Thermoelements Transmitters

Training:Customized seminars and trainingsessionwww.instrumenteringskursus.dk

Products and Services

© Insatech A/S

Reproduction of text or excerpts of this is authorized provided the source is acknowledged.

• Process instrumentation and calibration equipment• Automation, control and data aquisition• System design, engineering and validation

(DCS and Safety Systems)• Service/maintenance and

calibration (ISO 17025 accreditation)• Site surveys and evaluation

of process optimization based on better control practices

• Marine- and ship solutions, Cargo Management Systems

• Project Management• Flow rigs/calibration rigs• Special fi ttings• Product enhancements • Wireless solutions for monitoring

and control• Complete solutions including

panels and commissioning• Seminars and training

Our main business areas:

Conductivity calibrationTemperature calibration

Electrical calibration

As a result of our longstanding partnership with some of the world’s leading manufacturers within instrumentation and automation, we are able to provide a global service.

We work as a professional partner for our suppliers and for our customers – we believe in long relationships.Our main markets are in the Pharmaceutical, Food, Energy, Marine/Oil & Gas Industry, which means we have a strong knowledge of the special applications, as well as the requirements for documentation in these areas.

Prod

ucts

Documentation

Com

mis

sion

ing

EngineeringDesign

Trai

nin

g

Support

Com

mis

si

ring

ort

Logi

stics

Documentatio

n

CSR & Environment

Quality Assurance

Financial

ww

w.in

satech.com

Marine SolutionsService and M

aintenance - Process Optim

ization

On-site Calibratio

n

Instrumentation

Contro

l Sys

tem

s an

d Pr

ojec

tsAc

cred

ited

Calibration

Product Engineers

Service Eng

ineers

Key Account Manager

s

Project M

anagers

Eng

inee

rs M

etro

logy La

b