SherlineCollet ER 25 32 40 50 R8 Collet Headstocks and Motors

MAS, LLC

Sherline(TM) ER Collet Spindle Headstock

Category: Store

Adjustable ER Nut -Absolute Zero Nut

Sherline Headstocks- Mills, Lathes &

Universal

Sherline SpindleMotors Upgrade

Super Precision ERCollets

Tormach TTS CNC Ready Mills -Coming Soon

5 Axis Mills - ComingSoon!

Sign In

MAS, LLC


View as: Grid List Table Sort by

Sherline Headstocks - Mills, Lathes & UniversalCategory: Store > Sherline Headstocks - Mills, Lathes & Universal

You can now choose from our converted Sherline and Sherline compatible headstocks for use with ER40,ER32, ER25, R8 & MT3 collets. Also, spindles with built in jaw chuck plates. These are a direct replacementfor the Sherline mill or lathe. They are also excellent for custom setups. We also offer larger universalheadstocks. Both mineral filled universal & solid aluminum headstocks using R8 or MT3 spindles.

Showing 1-9 of 12 results

ER-40 [PrecisionInstrumentHeadstock]Conversion forSherline Mill,Lathe or CustomSetupSKU 00010

$397.00


$367.00


$347.00

ER-50 [PrecisionInstrumentHeadstock]Conversion forSherline Mill,Lathe or CustomSetupSKU ER50S

$424.97

Mineral Filled R8Precision GroundMill Headstock(fits Mini Mill)SKU 00021

$697.00

New for SherlineLathe, Headstockwith MT3 bore &Jaw Chuck PlateSKU SHMT3LATHE

$387.00

SherlineCompatible R8Mill - CommercialDuty UniversalHeadstockSKU GB3535-R8

$497.00

SherlineCompatible MT3Mill - CommercialUniversalHeadstockSKU GB3535-MT3

$497.00

Heavy DutySherline ER-40Collet HeadstockSKU GBER40

$497.00

Page: 1 2 | Next

Sign In

MAS, LLC


Share

View detailed images (4)

600 Watt Industrial Contineous Duty Motor+Controller for SherlineHeadstocksCategory: Store > Sherline Spindle Motors Upgrade

The stock Sherline motor is a good motor, however youmay have noticed that it could really use morepower...how about a boost to 600 watts! Thats nearlytwice the power. Plus, its High Torque at any RPM.Imagine using a 600 Watt High Torque IndustrialContinuous Duty Brushless Motor on your lathe or mill.The standard pulley with our motor kit will give you about4,780 RPM. If you want less speed and more power,you can simply make a smaller motor pulley.

What you get:

600 Watt High Torque Brushless Continuous DutyMotor (fan cooled)

Same weight as stock motor, but with much morepower

Complete bolt on replacement mounting kit

No modifications needed

Brushless controller with 2 digit tachometer

Remote wired controller

Remote wired ON/OFF switch

Simple knob speed control

Max RPM on stock 90mm pulley 4,780 RPM

Motor is reversible through the controller

MACH3 controllable upgrade coming..

New belt115 volt or 220 volt versions available

Want almost twice the torque instead of high speed? 55mm pulley is only $29

Price: $397 for our ready to go industrial motor upgrade kit! Just bolt iton and start making chips!

Note: All of our motor upgrade kits are custom made and take approximately 2 weeks to ship. We offerreturns on defective parts 90 days or you may upgrade to a larger motor if returned un-used within 14 days.

Link to motor page:

http://sherlinecollet.com/sherline%20motor%20upgrade.htm

You May Also Like

Sign In

SKU S600MC

In stock

$397.00

Pulley Options55mm power pulley w/belt (+$39.00)

Extra belt for 90mm Pulley (+$16.00)


220V version (+$29.00)

Shipping Insurance (+$8.00)

Qty 1

ER-40 [PrecisionInstrument Headstock]Conversion for SherlineMill, L...SKU 00010

$397.00


$367.00


$347.00

MAS, LLC


Share


800Watt Motor+Controller for Sherline HeadstocksCategory: Store > Sherline Spindle Motors Upgrade

(Headstock in pictures is sold separately andnot included)

Welcome to the Glock EnduroPower Motors(TM) line...

The stock Sherline motor is a good motor, however youmay have noticed that it could really use morepower...how about a boost to 800 watts! Thats nearlytwice the power. Plus, its High Torque at any RPM.Imagine using a 800 Watt High Torque IndustrialContinuous Duty Brushless Motor on your lathe or mill.The motor RPM is 4,000. Of course, your final spindleRPM will depend upon your pulley ratio.

What you get:

800 Watt High Torque Brushless Continuous DutyMotor (fan cooled)

Same weight as stock motor, but with much more power



Brushless controller with 2 digit motor tachometer showing motor speed




Motor RPM 4,000


MACH3 controllable upgrade option available

New belt

110v or 220 volt




Link to motor page:


You May Also Like

Sign In

SKU S800MC

In stock

$557.00




220V version (+$29.00)


Qty 1


$397.00


$367.00


$347.00

MAS, LLC


Share


1,000 Watt 220v Industrial Contineous Duty Motor+Controller forSherline HeadstocksCategory: Store > Sherline Spindle Motors Upgrade

(Headstock in pictures is sold separately and notincluded)


NeoStrong Series 1,000 Watt Industrial Continuous DutyMotor & Controller

Still wanting more power...your new NeoStrong 1,000watt Brushless Industrial Motor is it. The NeoStrongseries are different than our other motors; they use rareearth magnets made from Neodymium. Plus, its HighTorque at any RPM. Imagine using a 1,000 Watt HighTorque Industrial Continuous Duty Brushless Motor onyour lathe or mill.

The standard pulley with our motor kit will give you about3,800 RPM. If you want less speed and more power,you can simply make a smaller motor pulley.

What you get:

1,000 Watt High Torque Brushless Continuous Duty Motor (fan cooled)




Brushless controller with 4 digit* motor tachometer showing motor speed






MACH3 controllable upgrade option available

New belt

220 volt only



*RPM on controller - although it's a 4 digit, it only shows in increments of 100RPM.


You May Also Like

Sign In

SKU S1000MC

In stock

$657.00





Qty 1


$397.00


$367.00


$347.00

MAS, LLC


Share


1,400 Watt 220v Industrial Contineous Duty Motor+Controller forSherline HeadstocksCategory: Store > Sherline Spindle Motors Upgrade

(Headstock in pictures is sold seprately and notincluded)


NeoStrong Series 1,400 Watt Industrial Continuous DutyMotor & Controller

So, I see you are serious about needing somepower...well, your new NeoStrong 1,400 watt BrushlessIndustrial Motor is it. The NeoStrong series are differentthan our other motors; they use rare earth magnetsmade from Neodymium. You have over twice the powerof our 600 watt. Plus, its High Torque at any RPM.Imagine using a 1,400 Watt High Torque IndustrialContinuous Duty Brushless Motor on your lathe or mill.

The standard pulley with our motor kit will give you about4,500 RPM. If you want less speed and more power,you can simply make a smaller motor pulley.

What you get:

1,400 Watt High Torque Brushless Continuous Duty Motor (fan cooled)




Brushless controller with 4 digit* motor tachometer showing motor speed






MACH3 controllable upgrade coming..

New belt

220 volt only


*RPM on controller - although it's a 4 digit, it only shows in increments of 100RPM.



Link to motor page:

http://www.glockcnc.com/sherline%20taig%20motor%20upgrades.htm


You May Also Like

Sign In

SKU S1400MC

In stock

$769.00





Qty 1


$397.00


$367.00


$347.00

MAS, LLC



Adjustable ER Nut - Absolute Zero NutCategory: Store > Adjustable ER Nut - Absolute Zero Nut

You can now dial in your part or cutter to "zero" it out. After you get your new ER nut, just chuck your part orcutter, place an indicator on it to locate "out of round" and adjust as the needed set screw(s) to zero out. It'sthat easy. Your parts can are now super accurate and you mill cutters can last longer with better accuracy!

Adjustable ERCollet Nut - ER40SizeSKU AZER40

$224.00


$199.00


$189.00

Sign In

MAS, LLC


Share


Adjustable ER Collet Nut - ER25 SizeCategory: Store > Adjustable ER Nut - Absolute Zero Nut

Finally, you can now "Zero Out" your work piece on alathe or a cutter for milling (great for our ERheadstocks and any ER tool holders). See, here is thebeauty of the new GlockCNC Absolute-Zero-ER Nut;you can compensate for both the spindle and colletrunoutplus, you are able to zero-out the runout at thefurthest tip of the part or cutter. As you know, runout isgreatest farthest away from the collet chuck. Just putyour test indicator at the furthest part, measure andadjust.

Here is how it all works. Our special collet nut has twomajor pieces; the outer nut with threads and the innercompression ring (the whole assembly is held togetherby a retention ring). There are 6 socket head setscrews around the outer edge ER nut. Back all of themout until the top of the set screw is flush with the colletnut surface. Tighten the mounted collet nut onto thework piece or cutter. Place your test indicator at thefarthest point of what you are clamping. Turn thespindle to see where your part or cutter is out ofround and hold it there. Simply adjust the corresponding set screw to zero out the part or cutter on the testindicator. Do this for any area that is out round. Thats it.

Heres the secret. The set screws dont press on the collet. They press on the inner collet compressionring. This uniformly adjusts small areas of the collet. This allows you to compensate for spindle and colleterror. You see, the spindle will have a certain amount of error and so will any collet. When you put thecollet in the spindle, you add error on top of error. This is call stacking. Your new Absolute-Zero-ER nut isyour solution for this. It can compensate for that combined error (of course, if your spindle, part or cutter istoo far out of whack, then you may still have some errormakes sense right?).

Uses:

LathesZero out the actual work piece for super accurate work

Great where you must have absolutely the highest accuracy or small parts where you cant afford to losetoo much material

MillsWhen your end mills are dialed into Zero, your end mills will last longer. This is because all flutes arecutting evenly. If your end mill isnt turning true, that means some flutes are doing most of the cutting whileothers arent. This means flutes that are doing most of the work will wear out more quickly.

More accurate finished products. If your cutter is actually moving in an oblong fashion instead of round; youwill have an in accurate finished part. It will remove more material than you may have planned on. You cannow get the accuracy similar to a shrink fit tooling system without the major investment. All by using ourAbsolute-Zero-ER nut

Look, we understand that buying ultra precision components arent cheap...and this is no exception. But ifyou require absolute accuracy; then this could end up being the cheapest investment you could maketoward that end, period.

Available in ER40, ER32 and ER25. Requires collet nut wrench one size bigger than stock. In other words,the ER40 version will require an ER50 collet nut wrench, ER32 needs ER40, ER25 needs ER32. Colletwrenches are available for all sizes.

(Quick side note; these are made in batches and are in demand. Its best to you as many as you want andorder as soon as possible. All are sold first come first serve before going on the waiting list. This price is forthe collet nut only, headstock in images is sold separately.)

Sign In

SKU AZER25

In stock

$189.00

Collet Wrench For ER25Abosolute Zero Nut

ER32 Collet Wrench (+$14.00)

Qty 1

MAS, LLC


Share


ER-25 [Precision Instrument Headstock] Conversion for Sherline Mill,Lathe or Custom SetupCategory: Store > Sherline Headstocks - Mills, Lathes & Universal

ER-25 Precision Instrument - Sherline ConvertedHeadstock

For: Lathe, Mills or custom project

If you are looking for the Sherline ER collet conversionthat works best for super high speeds, this is the one.The ER-25 has less moving mass and works well withvery high speeds. Plus, you can finally get the highlevel of precision you want out of a Sherline (withoutusing tiny 1160 & 1162 WW Sherline collets). Let'sface it, to holding larger stock with the Sherline jawchucks gives limited precision and camping surfacearea. This problem is now solved with you newheadstock.

ER25 Collet sizes ranges available 1/16 to 5/8Through hole is .30(optional .55 Large Bore for larger long stock) .0005" or runout at the collet mating surfaceNew ABEC-7 Bearings (Sherline stock bearingsaren't really high precision)Large Bore version has 3 bearingsIncludes collet nut wrench

>>>IMPORTANT NOTE: IF YOU REQUIREABSOLUTE PRECISION, I HIGHLY RECOMMENDTHAT OUT INVEST IN THE ADJUSTABLE ER COLLETNUT...YOU CAN DIAL IN YOUR PART TO ALMOSTZERO MEASUREABLE RUNOUT (IF YOUR PART IS STRAIGHT/ROUND AND GOOD COLLETS). Pleasesee Adjustable Collets under the product categories.

MAS, LLC


Share




Here is how it all works. Our special collet nut has twomajor pieces; the outer nut with threads and the innercompression ring (the whole assembly is held togetherby a retention ring). There are 6 socket head setscrews around the outer edge ER nut. Back all of themout until the top of the set screw is flush with the colletnut surface. Tighten the mounted collet nut onto thework piece or cutter. Place your test indicator at thefarthest point of what you are clamping. Turn thespindle to see where your part or cutter is out ofround and hold it there. Simply adjust thecorresponding set screw to zero out the part or cutter on the test indicator. Do this for any area that is outround. Thats it.


Uses:








Sign In

SKU AZER32

In stock

$199.00

Collet Wrench For ER32Abosolute Zero Nut


Qty 1

MAS, LLC


Share





The ER-32 one of the best sellers. It's also ER-32 goodwith higher speeds. With it, you can finally get the highlevel of precision you want out of a Sherline (withoutusing tiny 1160 & 1162 WW Sherline collets). Let'sface it, to holding larger stock with the Sherline jawchucks gives limited precision and camping surfacearea. This problem is now solved with you newheadstock.

ER32 Collet sizes available 3/32 to 25/32" Through hole is .55 (optional .789 Large Bore for larger long stock) .0005" or runout at the collet mating surfaceNew ABEC-7 Bearings (Sherline stock bearingsaren't really high precision)Large Bore version has 3 bearingsIncludes collet nut wrench

>>>IMPORTANT NOTE: IF YOU REQUIREABSOLUTE PRECISION, I HIGHLY RECOMMENDTHAT OUT INVEST IN THE ADJUSTABLE ER COLLETNUT...YOU CAN DIAL IN YOUR PART TO ALMOST ZERO MEASUREABLE RUNOUT (IF YOUR PART ISSTRAIGHT/ROUND AND GOOD COLLETS). Please see Adjustable Collets under the productcategories.

MAS, LLC


Share


Heavy Duty Sherline ER-32 Collet HeadstockCategory: Store > Sherline Headstocks - Mills, Lathes & Universal

The Sherline headstock is a good little headstock, butits a bit too small for some needs. Because of thedemand for a more robust headstock with largerbearings; we introduce the Glock Billet Headstock. Ithas all the mounting features of a stock Sherlineheadstock to keep it completely compatible withSherline products. Plus, it has additional mounts forcustom machines. The differences are as follows:

You can now have a more robust 3.5W x 3.5Tx 3.0L, thats a full 1.00 wider and taller (0.50on each side & 1.00 taller than a stock Sherlineheadstock, center is still 1.75)Larger 62mm OD bearings for heavier work loadand superior wear, so you can use heavierchucks, parts or cutters (stock is only 42mmOD)Available in deep groove, angular contact (bothin ABEC-5 or ABEC-7) and heavy load taperbearings(4) -20 threaded mounting holes on the bottomof the headstock for superior rigidity on custom setups

Recommendations:

While not necessary, we do recommend using at least a 600 watt motor for this (we offer 600 watt to1,400 watt options). The bearings are much more heavy duty. If you choose to use a stock Sherlinemotor, it will work, however you will need a longer belt (it will directly mount, holes are in the sameplace and size as on a stock Sherline headstock)Pulley - Many opt for a timing pulley set. You mayalso adapt a stock Sherline pulley.We offer both V groove & timing pulley taper lock sets and adapted Sherline pulleys.

Options:-

ABEC-7 super precision deep groove bearings (standard bearings are ABEC-5)Large BoreSherline stock pulley bored to fit spindleER32 Adjustable collet nutTiming pulley - please ask

Please note: Because of heavy demands, please expect about a 4 week build time.

You May Also Like

Sign In

SKU GBER32

In stock

$497.00

Options2 Step Bored Sherline Pulley

(+$49.00)

ABEC-7 super precision deep groovebearing set (+$197.00)

Large Bore .790" (+$49.00)

Adjustable ER32 Nut (+$199.00)

Qty 1

Techniks UltraPrecision ER-32 18Piece Collet Set - InchSet 7/32" -...SKU UP04212IS

$486.00

Techniks UltraPrecision ER-32 18Piece Collet Set - MetricSet 3 - 20...SKU UP04205MS

$486.00

Adjustable ER ColletNut - ER32 SizeSKU AZER32

$199.00

MAS, LLC


Share




Here is how it all works. Our special collet nut has twomajor pieces; the outer nut with threads and the innercompression ring (the whole assembly is held togetherby a retention ring). There are 6 socket head setscrews around the outer edge ER nut. Back all of themout until the top of the set screw is flush with the colletnut surface. Tighten the mounted collet nut onto thework piece or cutter. Place your test indicator at thefarthest point of what you are clamping. Turn thespindle to see where your part or cutter is out ofround and hold it there. Simply adjust thecorresponding set screw to zero out the part or cutter on the test indicator. Do this for any area that is outround. Thats it.


Uses:








Sign In

SKU AZER40

In stock

$224.00

Collet Wrench For AbsoluteZero ER40 Nut


Qty 1

MAS, LLC


Share





If you are looking for the Sherline ER collet conversionwith a wide range of collet sizes, this is it. Your newER-40 will give you a lot of flexibility. Plus, you canfinally get the high level of precision you want out of aSherline (without using tiny 1160 & 1162 WW Sherlinecollets). Let's face it, to holding larger stock with theSherline jaw chucks gives limited precision andcamping surface area. This problem is now solved withyou new headstock.

ER40 collet sizes available 1/8 to 1Through hole is .55 (optional .789" Large Bore for larger long stock) .0005" or runout at the collet mating surfaceNew ABEC-7 Bearings (Sherline stock bearingsaren't really high precision)Large Bore version has 3 bearingsIncludes collet nut wrench

>>>IMPORTANT NOTE: IF YOU REQUIREABSOLUTE PRECISION, I HIGHLY RECOMMENDTHAT OUT INVEST IN THE ADJUSTABLE ER COLLETNUT...YOU CAN DIAL IN YOUR PART TO ALMOSTZERO MEASUREABLE RUNOUT (IF YOUR PART ISSTRAIGHT/ROUND AND GOOD COLLETS). Pleasesee Adjustable Collets under the productcategories.

MAS, LLC


Share




You can now have a more robust 3.5W x 3.5Tx 3.0L, thats a full 1.00 wider and taller (0.50on each side & 1.00 taller than a stock Sherlineheadstock, center is still 1.75)Larger 62mm OD bearings for heavier work loadand superior wear, so you can use heavierchucks, parts or cutters (stock is only 42mmOD)Available in deep groove, angular contact (bothin ABEC-5 or ABEC-7) and heavy load taperbearings(4) -20 threaded mounting holes on the bottomof the headstock for superior rigidity on customsetups

Recommendations:

While not necessary, we do recommend usingat least a 600 watt motor for this (we offer 600watt to 1,400 watt options). The bearings aremuch more heavy duty. If you choose to use a stock Sherline motor, it will work, however you willneed a longer belt (it will directly mount, holes are in the same place and size as on a stockSherline headstock)Pulley - Many opt for a timing pulley set. You may also adapt a stock Sherlinepulley.We offer both V groove & timing pulley taper lock sets and adapted Sherline pulleys.

Options:-

ABEC-7 super precision deep groove bearings (standard bearings are ABEC-5)Large BoreSherline stock pulley bored to fit spindleER40 Adjustable collet nutTiming pulley - please ask


You May Also Like

Sign In

SKU GBER40

In stock

$497.00


(+$49.00)


Large Bore .790" (+$49.00)

Adjustable ER40 nut (+$224.00)

Qty 1


$397.00

Techniks UltraPrecision ER-40 13Piece Collet Set - InchSet 1/8" - 1...SKU UP04213IS

$384.95

Techniks UltraPrecision ER-40 23Piece Collet Set - MetricSet 4 - 26...SKU UP04206MS

$629.95

MAS, LLC


Share



If you are looking for the Sherline ER collet conversionwith a widest range of larger collet sizes, you havefound it. Your new ER-50 will give you a lot clampingpower for material from .394" to 1.339" diameter (12mmto 34mm). The through hole is .820", which is thelargest of any of the ER spindles. All ER50 spindlesare mounted with two front bearings and two rearbearings because of the extra mass (4 bearings total).We also recommend, at minimum, getting the 600 wattmotor upgrade at, preferably the 800 watt, 1,000 wattor 1,400 watt motors. There is more moving mass onthis unit.

Backside of the spindle is smooth bore 29.5mmdiameter.

Please Note: All of our spindles are custom ground,hardened and balanced. It take about 6 weeks buildtime. The ER50 is really what I would call an "extraspecial order" and the cash outlay for this reflects that.Frankly, they are a bigger investment and not manysources can custom grind this at the level of precisonwe demand (we found a few others, but the cost wasoutrageous). It's not for everybody. On flip side, if youneed the size capacity and precision, than nothing elsewill do....

You May Also Like

Sign In

SKU ER50S

In stock

$424.97

UpgradesPermanentl y Lubricated Factory

Sealed ABEC-7 Angular ContactBearings (+$299.00)

Sherline 2 step pulley bored/threadedfor spindel (+$49.00)

Deep Grove Bearing upgrade ABEC-5(+$149.00)

Sherline Headstock Spacer 1297(+$45.00)

Qty 1

1,400 Watt 220vIndustrial ContineousDuty Motor+Controllerfor Sherli...SKU S1400MC

$769.00

Techniks UltraPrecision ER-50 17Piece Collet Set - MetricSet 6 - 34...SKU TEC04207MS

$969.00

MAS, LLC


Share




You can now have a more robust 3.5W x 3.5Tx 3.0L, thats a full 1.00 wider and taller (0.50on each side & 1.00 taller than a stock Sherlineheadstock, center is still 1.75)Larger 62mm OD bearings for heavier work loadand superior wear, so you can use heavierchucks, parts or cutters (stock is only 42mmOD)Available in deep groove, angular contact (bothin ABEC-5 or ABEC-7) and heavy load taperbearings(4) -20 threaded mounting holes on the bottom of the headstock for superior rigidity on customsetups

Recommendations:

While not necessary, we do recommend using at least a 600 watt motor for this (we offer 600 watt to1,400 watt options). The bearings are much more heavy duty. If you choose to use a stock Sherlinemotor, it will work, however you will need a longer belt (it will directly mount, holes are in the sameplace and size as on a stock Sherline headstock)Pulley - Many opt for a timing pulley set. You mayalso adapt a stock Sherline pulley.We offer both V groove & timing pulley taper lock sets and adapted Sherline pulleys.

Options:-

ABEC-7 super precision deep groove bearings (standard bearings are ABEC-5)Large BoreSherline stock pulley bored to fit spindleTiming pulley - please ask


Sign In

SKU GBER50

In stock

$497.00


(+$49.00)


Large Bore .790" (+$49.00)

Qty 1

MAS, LLC


Share


New for Sherline Lathe, Headstock with MT3 bore & Jaw Chuck PlateCategory: Store > Sherline Headstocks - Mills, Lathes & Universal

NEW from GlockCNC ! (Patent Pending)

You can now hurry and grab our patent pending spindlewith Sherline headstock combination. Here are thefeatures:

MT3 bore spindle for precision collet workholding (3/4" max collet holding size)Built in chuck adapter plate. You can mount 3"to 6" jaw chucks (adapter plate may be requiredwith headstock spacer for chucks larger than 3"available form Little Machine Shop)You can now used 5C collets by using a 5Cchuck (5C chuck & adapter sold separately).0005 or better TIR bore4 ABEC-5 bearings for robust strengthLarge .805" through hole for longer stock pass-through the backside

You can now use a wide variety of chucks and are nolonger locked into using small thin Sherline chucks. Imagine your new possibilities!

What you need to know: Simply bore out a Sherline pulley to mate with the enlarged spindle and you areready to swap out to your new headstock (pulleys from us are $49). Jaw chuck adapters are also availablefrom Little Machine Shop. Build time is typically 2 weeks at this point.

Want a commercial grade headstock & bearings? Upgrade to our Sherline compatible commercial gradeheadstock with bigger bearings. These larger bearings are well suited for heavier chucks and wear. Theheadstock measures 3.5"x3.5", so it's more heavy duty.

Want more power? Add a 600, 800, 1,000 or 1,400 watt brushless motor to your order. Please see oursite or other auctions

Headstock page:

http://www.glockcnc.com/sherline%20headstocks.htm

Sign In

SKU SHMT3LATHE

In stock

$387.00

Options for your headstock2 Step Sherline Pulley Bored To Fit

(+$49.00)

Upgrade to Commercial GradeHeadstock w/larger bearings (+$110.00)

ABEC-7 Super Precision BearingsONLY for Commercial Grade Headstock(+$197.00)

Qty 1

MAS, LLC


Share


Sherline Compatible MT3 Mill - Commercial Universal HeadstockCategory: Store > Sherline Headstocks - Mills, Lathes & Universal

New Larger Sherline CompatibleHeadstock

ATC-READY (Automatic Tool Changer) forMills

5C with rear drawtube coming soon forLathes!

(Your headstock will come fully assembled. TormachTTS sold separately)

The Sherline headstock is a good littleheadstock, but its a bit too small for someneeds. Because of the demand for a morerobust headstock with larger bearings; weintroduce the Glock Billet Headstock. It has allthe mounting features of a stock Sherlineheadstock to keep it completely compatible withSherline products. Plus, it has additional mountsfor custom machines. The differences are asfollows:

You can now have a more robust 3.5W x 3.5T x 3.0L, thats a full 1.00 wider and taller (0.50 on each side & 1.00 taller than a stock Sherline headstock, center is still 1.75)Larger 62mm OD bearings for heavier work load and superior wear, so you can useheavier chucks, parts or cutters (stock is only 42mm OD)Available in deep groove, angular contact (both in ABEC-5 or ABEC-7) and heavy loadtaper bearings(4) -20 threaded mounting holes on the bottom of the headstock for superior rigidity oncustom setupsThe new headstocks will accommodate R8, MT3/chuck adapter, MT3, ER 25, 32, 40, 50and - 5C with rear drawtube coming soon (it will be slightly larger in size)Higher rigidity Using the MT3 or R8 spindle with Tormach Tooling System...this willallow for custom ATC (automatic tool changer) applications or rapid manual changes. Ahuge variety of cutters and cutter holders. Also, the TTS transfers the tool press to theface of the spindle and the angular walls. This makes it much more rigid than just usingthe angular inside portion of the spindle. We also recommend a larger Z axis for this.

ATC & Tormach Tooling System (TTS) - (you may order Tormach TTS parts directly from us) The headstock with R8 or MT3 spindle will be required to use TTS. Your new headstock isATC ready. In other words, you can adapt a pneumatic or electric linear actuator for this. Thedesign is up to you. Please note: while the R8 will afford you more options for R8 specifictooling, the MT3 spindle places the tooling closer to the bearings and will allow for more Z axismovement. This is because the nose that sticks out from the bearings is shorter by about a . It is therefore more rigid and allows for more Z movement. TTS will also allow you to program tool heights into your control software, such as Mach3 orMach4.

Recommendations:While not necessary, we do recommend using at least a 600 watt motor for this. Thebearings are much more heavy duty. If you choose to use a stock Sherline motor, it willwork, however you will need a longer belt (it will directly mount, holes are in the sameplace and size as on a stock Sherline headstock)Pulley - Many opt for a timing pulley set. You may also adapt a stock Sherline pulley. Weoffer both V groove & timing pulley taper lock sets and adapted Sherline pulleys.


Sign In

SKU GB3535-MT3

In stock

$497.00

OptionsABEC-7 Sealed Deep Groove

Bearings (5.5k RPM) (+$197.00)

ABEC-7 Sealed Angular ContactBearings (8K RPM) (+$357.00)

Adapted Stock Sherline Pulley(+$49.00)

Timing pulley - Taper Lock Type(+$125.00)

Qty 1

MAS, LLC


Share


Sherline Compatible R8 Mill - Commercial Duty Universal HeadstockCategory: Store > Sherline Headstocks - Mills, Lathes & Universal

New Larger Sherline CompatibleHeadstock

ATC-READY (Automatic Tool Changer) forMills

5C with rear drawtube coming soon forLathes!

(Your headstock will come fully assembled. TormachTTS parts sold separately)

The Sherline headstock is a good littleheadstock, but its a bit too small for someneeds. Because of the demand for a more robustheadstock with larger bearings; we introducethe Glock Billet Headstock. It has all the mountingfeatures of a stock Sherline headstock to keep itcompletely compatible with Sherline products.Plus, it has additional mounts for custommachines. The differences are as follows:

You can now have a more robust 3.5W x3.5T x 3.0L, thats a full 1.00 wider andtaller (0.50 on each side & 1.00 taller thana stock Sherline headstock, center is still1.75)Larger 62mm OD bearings for heavier work load and superior wear, so you can useheavier chucks, parts or cutters (stock is only 42mm OD)Available in deep groove, angular contact (both in ABEC-5 or ABEC-7) and heavy loadtaper bearings(4) -20 threaded mounting holes on the bottom of the headstock for superior rigidity oncustom setupsThe new headstocks will accommodate R8, MT3/chuck adapter, MT3, ER 25, 32, 40, 50and - 5C with rear drawtube coming soon (it will be slightly larger in size)Higher rigidity Using the MT3 or R8 spindle with Tormach Tooling System...this willallow for custom ATC (automatic tool changer) applications or rapid manual changes. Ahuge variety of cutters and cutter holders. Also, the TTS transfers the tool press to theface of the spindle and the angular walls. This makes it much more rigid than just usingthe angular inside portion of the spindle. We also recommend a larger Z axis for this.

ATC & Tormach Tooling System (TTS) - (you may order Tormach TTS parts directly from us)The headstock with R8 or MT3 spindle will be required to use TTS. Your new headstock is ATCready. In other words, you can adapt a pneumatic or electric linear actuator for this. The designis up to you. Please note: while the R8 will afford you more options for R8 specific tooling, theMT3 spindle places the tooling closer to the bearings and will allow for more Z axis movement.This is because the nose that sticks out from the bearings is shorter by about a . It istherefore more rigid and allows for more Z movement.TTS will also allow you to program tool heights into your control software, such as Mach3 orMach4.Recommendations:

While not necessary, we do recommend using at least a 600 watt motor for this. Thebearings are much more heavy duty. If you choose to use a stock Sherline motor, it willwork, however you will need a longer belt (it will directly mount, holes are in the sameplace and size as on a stock Sherline headstock)Pulley - Many opt for a timing pulley set. You may also adapt a stock Sherline pulley. Weoffer both V groove & timing pulley taper lock sets and adapted Sherline pulleys.


Sign In

SKU GB3535-R8

In stock

$497.00

OptionsABEC-7 Sealed Deep Groove

Bearings (5.5k RPM) (+$197.00)

ABEC-7 Sealed Angular ContactBearings (8K RPM) (+$357.00)

Adapted Stock Sherline Pulley(+$49.00)

Timing pulley - Taper Lock Type(+$125.00)

Qty 1

MAS, LLC



Sherline Spindle Motors UpgradeCategory: Store > Sherline Spindle Motors Upgrade

Get an industrial boost in power. Grab a 600, 800, 1,000 or 1,400 Watt Brushless Industrial Continuous DutyMotor, Controller and Mounts. FULL power at any RPM. Ready to bolt on to your stock Sherline headstocks,your ER Collet Conversion Sherline Headstock, X2 Asian Mini Mill or 7x Asian Mini Lathes.

600 WattIndustrialContineous DutyMotor+Controllerfor SherlineHeadstocksSKU S600MC

$397.00

800WattMotor+Controllerfor SherlineHeadstocksSKU S800MC

$557.00

1,400 Watt 220vIndustrialContineous DutyMotor+Controllerfor SherlineHeadstocksSKU S1400MC

$769.00

1,000 Watt 220vIndustrialContineous DutyMotor+Controllerfor SherlineHeadstocksSKU S1000MC

$657.00

Replacment ToothBelt Motor PulleysSKU THBELT

$16.00

1,400 Watt 220vMotor+Controllerfor Mineral FilledHeadstocks MiniMill or LatheSKU M1400MC

$769.00

1,000 WattMotor+Controllerfor Mineral FilledHeadstocks MiniMill or LatheSKU M1000MC

$657.00

600 WattMotor+Controllerfor Mineral FilledHeadstocks MiniMill or LatheSKU M600MC

$397.00

800Watt MotorFor Mineral FilledMini Mill/LatheHeadstocksSKU M800MC

$557.00

Sign In

MAS, LLC



Super Precision ER ColletsCategory: Store > Super Precision ER Collets

Order your new set of .0002" Techniks collets so you can have the ultimate in precision.

Techniks UltraPrecision ER-2516 Piece ColletSet - Inch Set5/32" - 5/8" in32ndsSKU UP04211IS

$314.95

Techniks UltraPrecision ER-3218 Piece ColletSet - Inch Set7/32" - 3/4" by32ndsSKU UP04212IS

$486.00

Techniks UltraPrecision ER-4013 Piece ColletSet - Inch Set1/8" - 1" by 16thsSKU UP04213IS

$384.95

Techniks UltraPrecision ER-2515 Piece ColletSet - Metric Set 2- 16mm by 1mmSKU UP04204MS

$314.95


$486.00


$629.95

Techniks UltraPrecision ER-5017 Piece ColletSet - Metric Set 6- 34mm by 2mmSKU TEC04207MS

$969.00

Sign In

Sherline Mill Lathe Upgrades Modifications Storesherlinecollet Sherline Headstocksherlinecollet 600w Sherline Motor Upgradesherlinecollet 800w Sherline Motor Upgradesherlinecollet 1000w Sherline Motor Upgradesherlinecollet 1400w Sherline Motor Upgradesherlinecollet ER25 32 40 Adjustable Collet Nutsherlinecollet ER25 Adjustable Collet Nutsherlinecollet ER25 Sherline Headstocksherlinecollet ER32 Adjustable Collet Nutsherlinecollet ER32 Sherline Headstocksherlinecollet ER32 Sherline Heavy Duty Headstocksherlinecollet ER40 Adjustable Collet Nutsherlinecollet ER40 Sherline Headstocksherlinecollet ER40 Sherline Heavy Duty Headstocksherlinecollet ER50 Sherline Headstocksherlinecollet ER50 Sherline Heavy Duty Headstocksherlinecollet MT3 Sherline Headstocksherlinecollet MT3 Sherline Heavy Duty Headstocksherlinecollet R8 ATC Sherline Heavy Duty Headstocksherlinecollet Sherline Motor Upgradessherlinecollet Super Precision ER 25 32 40 50 Collet Sets

Documents

SherlineCollet ER 25 32 40 50 R8 Collet Headstocks and Motors