Collet Chucks & Collet Pads

Collet Chucks & Collet Pads

Selection Chart For Thru-Hole Collet Chucks:

Hot Rolled Stock vs. Ground or Cold Rolled StockIf you contemplate using hot rolled bar stock then the "Hot Rolled" branch should be selected.Drawtube Pull Required vs. Drawtube Push AcceptableSome servo barfeeders require the drawtube to pull when closing the collet chuck. If no barfeeder is involved or the selected barfeeder does not have this requirement, then a collet chuck which closes when the drawtube is pushed forward would be acceptable.Dead Length Required vs. "Pull Back Action"A collet chuck with "Pull Back Action" will pull the bar away from the stop in the turret. If inconsistent stock length on a facing cut is unacceptable, or if the barfeed is servo driven, then a dead length collet chuck is indicated.

Superior Cincinnati is an industry leader in the design and manufacturing of Collet Chucks, Collet Pads, Feed Finger Pads and workholding accessories. Since 1975 we have provided outstanding quality, value and service to our customers. We continuously strive to meet our customers ever increasing requirements to improve productivity and profits. Superior Cincinnati workholding products come with off-the-shelf delivery for most machine tools. Our national network of distributors, located in all major cities, are ready to serve your workholding needs. Our products are manufactured to the highest quality standards each and every day, priced to save you money and fully guaranteed to your satisfaction.

Precision Required vs. Standard AccuracySelect "Precision Required" where close repeatability is required a distance from the face of the collet chuck.Solid Collet vs. Master Collet with Collet PadsSome collet chucks require the use of a solid collet such as 5C, 16C, 3J or "B" Style collets. This means that the solid collet must be changed to accommodate different diameters. With a master and pads, the master collet remains in the collet chuck and only the collet pads are changed. Solid collets are considered more accurate but cost about 50% more than collet pads of comparable size."S" Style vs. Turret Lathe PadsSome customers prefer one type of collet pad over the other. Turret Lathe Pads are more readily available from several manufacturers. "S" Style Pads are only available from a limited number of suppliers.

2. © Superior Cincinnati, 2004, 2010

Thru-Hole Collet Chuck Index

• No part movement• True parallel grip = More gripping force• Drawtube push to actuate• Up to 6" bar stock capacity• Full .125" clamping range permitting optional robot load

• Exclusive Centr-Adjust feature to centralize the chuck• Repeatability @ chuck face is .0005" T.I.R. or better• Uses "S" Style or Turret Lathe Collet Pads• Has provision for an internal workstop• Short length• In stock

• Close repeatability a distance from the face of the chuck• Extended grip length-Able to grip on two diameters• Drawtube push to actuate• Up to 2" bar stock capacity• Full .063" clamping range

• Exclusive Centr-Adjust feature to centralize the chuck• Repeatability @ chuck face is .0005" T.I.R. or better• Uses Turret Lathe Collet Pads• Helps prevent vibration due to bar whip• In stock

• Repeatability @ chuck face is .0005" T.I.R. or better• Uses 5C, 16C or 3J Style Collets• Features a collet locating pin• In stock

• Repeatability @ chuck face is .0005" T.I.R. or better• Uses "S" Style, Martin Type or Turret Lathe Collet Pads• Master collet provided• Ideal for first operations and slug work• In stock

• No part movement• Ideal for subspindle applications, secondary operations and part transfers• Available with optional part ejector• Drawtube push to actuate• Up to 2 3/8" bar stock capacity

• Exclusive Centr-Adjust feature to centralize the chuck• Repeatability @ chuck face is .0005" T.I.R. or better• Uses "B" Style Solid Collets• Features a collet locating pin• Small size allows for greater tool clearances and more z-axis travel• In stock

• Pullback action• Drawtube actuated• Up to 1 3/4" bar stock capacity• Exclusive Centr-Adjust feature to centralize the chuck

• Pullback action• Drawtube actuated• Up to 4" bar stock capacity• Exclusive Centr-Adjust feature to centralize the chuck

• No part movement• True parallel grip = More gripping force• Drawtube pull to actuate• Up to 6" bar stock capacity• Full .125" clamping range permitting optional robot load

• Exclusive Centr-Adjust feature to centralize the chuck• Repeatability @ chuck face .is 0005" T.I.R. or better• Uses "S" Style or Turret Lathe Collet Pads• Has provision for an internal workstop• Short length• Need for turret stop is lessened or eliminated

3.

CDS "S" Style Conventional Master Collet Chucks Page 5

COLLET CHUCKS PADS Page 16

ORDERING INFORMATION Page 19

CNS/CNT "S" Style & Turret Lathe Collet Chucks Page 4

CDD Duplex Collet Chucks Page 5

CPD "B" Style Solid Collet Chucks Page 5

CDC 5C, 16C, 3J Conventional Solid Collet Chucks Page 5

CRS/CRT "S" Style & Turret Lathe Collet Chucks for Servo Barfeeders Page 4

Note: Dimensional data and capacities are shown in inches. Specifications and dimensional data are subject to change with design improvements. All pads available soft or hardened to 58-60 Rc.Specials: We make collet chucks and pads to fit your application.

• No part movement• True parallel grip = More gripping force = Faster feeds and speeds• Large .125" clamping range (opens & closes 0.6" from nominal) = Ability of the chuck to handle hot rolled stock• Exclusive Centr-Adjust feature to centralize the chuck• Short, totally sealed design – No exposed mating surfaces• Chuck is shorter than other competitive models

CNS/CNT "S" Style & Turret Lathe Collet Chucks

CRS/CRT "S" Style & Turret Lathe Collet Chucks for Servo Barfeeders

FOR TURRET LATHE COLLET PADS

1027

1025

1026

1022

1049

1014

CNT-15

CNT-20

CNT-25

CNT-30

CNT-45

CNT-60

1.50

2.00

2.50

3.00

4.50

6.00

A05A06A08

1.31

1.75

2.18

2.62

3.87

5.00

1.38

1.75

2.12

3.18

4.25

6.50

6.50

8.25

10.00

13.00

4.304.474.66

A05A06A08

5.215.285.64

A05A06A08

5.215.285.64

A05A06A08

5.215.285.49

A06A08A11

5.966.176.40

A11A15

7.908.31

1.06 5.25

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER

MAXIMUM BAR CAPACITY

ROUND HEXAGON SQUARE


1027

1025

1026

1022

1049

1014

CRT-15

CRT-20

CRT-25

CRT-30

CRT-45

CRT-60

1.50

2.00

2.50

3.00

4.50

6.00

A05A06A08

1.31

1.75

2.18

2.62

3.87

5.00

1.38

1.75

2.12

3.18

4.25

6.50

8.25

10.00

12.00

15.00

5.085.155.51

A05A06A08

5.085.155.51

A05A06A08

5.335.405.61

A05A06A08

5.335.405.84

A06A08A11

5.906.116.31

A11A15

6.817.32

1.06 6.50

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER



FOR "S" STYLE COLLET PADS

1216

1222

1226

1230

1240

CNS-16

CNS-22

CNS-26

CNS-30

CNS-40

1.62

2.25

2.62

3.00

4.00

A05A06A08

1.41

1.94

2.25

2.59

3.43

1.56

1.84

2.09

2.81

6.50

8.25

8.25

10.00

4.304.474.66

A05A06A08

5.215.285.64

A05A06A08

5.215.285.64

A05A06A08

5.215.285.49

A06A08A11

5.966.176.40

1.16 5.25

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER



FOR S STYLE COLLET PADS

1216

1222

1226

1230

1240

CRS-16

CRS-22

CRS-26

CRS-30

CRS-40

1.62

2.25

2.62

3.00

4.00

A05A06A08

1.41

1.94

2.25

2.59

3.43

1.56

1.84

2.09

2.81

6.50

8.25

10.00

12.00

5.085.155.51

A05A06A08

5.085.155.51

A05A06A08

5.335.405.61

A05A06A08

5.335.405.84

A06A08A11

5.405.615.81

1.16 6.50

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER



Benefits• No part movement• Designed for Servo Barfeeders• True parallel grip = More gripping force = Faster feeds and speeds• Large .125" clamping range (opens & closes 0.6" from nominal) = ability of the chuck to handle hot rolled stock• Exclusive Centr-Adjust feature to centralize the chuck• Short, totally sealed design – No exposed mating surfaces• Chuck is shorter than other competitive models

Benefits

4.

1220CNS-20 2.00 1.75 1.38 6.50A05A06A08

5.215.285.64

CPD "B" Style Solid Collet Chucks CDD Duplex Collet Chucks

FOR "B" STYLE COLLET PADS

B-30

B-42

B-60

CPD-30

CPD-42

CPD-60

1.18

1.65

2.36

A05A06A08

1.02

1.42

2.04

1.16

1.67

3.50

4.38

4.644.815.00

A05A06A08

5.775.846.20

A05A06A08

5.966.036.39

0.83 3.25

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER




1071

1025

CDD-15

CDD-20

1.50

2.00

A05A06A08

1.31

1.75 1.38 5.00

7.087.257.44

A05A06A08

7.457.517.88

1.06 4.00

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER



FOR 5C, 16C OR 3J COLLET PADS

5C

16C

CDC-5C

CDC-16C

1.06

1.62

A05A06A08

0.90

1.41 1.14 3.38

3.934.194.27

A05A06A08

4.714.885.07

3JCDC-3J 1.75 1.53 1.25 3.63A05A06A08

4.464.634.82

0.75 2.75

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER



CDC 5C, 16C, 3J Conventional Solid Collet Chucks

FOR "S" STYLE COLLET PADS

1216

1222

CDS-16

CDS-22

1.62

2.25

A05A06A08

1.41

1.94 1.56 4.86

7.737.908.09

A05A06A08

7.587.658.01

1226CDS-26 2.62 2.25 1.84 5.25A05A06A08

7.988.058.41

1230CDS-30 3.00 2.59 2.09 6.00A05A06

A08

8.238.30

8.51

1240CDS-40 4.00 3.43 2.81 7.75A06A08A11

9.289.729.72

1.16 4.00

COLLETNUMBER

CHUCKNOSE

DIAMETER

SPINDLENOSE

OVERALLLENGTH

CHUCKMODEL

NUMBER



CDS "S" Style Conventional Master Collet Chucks

• Extended grip length – Able to grip on two diameters• Exclusive Centr-Adjust feature to centralize the chuck• Sealed design – No exposed mating surfaces• Helps prevent vibration due to bar whip

Benefits• No part movement• Ideal for subspindle applications, secondary operations and part transfers• Available with optional part ejector• Small size allows for greater tool clearances and more z-axis travel

Benefits

5.

B-90CPD-90 3.13 2.72 2.20 6.00A06A08A11

7.087.267.52

All chucks on pages 4 & 5 include Spindle Adapter, Drawtube Adapter, Mounting Bolts & Maintenance Instructions.

Customer ServiceUSA: (800) 875-8175

Phone: (513) 272-1122Fax: (513) 272-0503

SUPER-GRIP® DISTINCTIVE BIDIRECTIONAL SERRATION DESIGN

EMERGENCY COLLET PADS (Soft, Blank)

• Specifically designed for emergencies• Available in "S", Turret Lathe and Martin Type styles• Collet pad material is soft with a 5/16" pilot hole for quick drilling, boring or stepping• Can be used multiple times by boring out to a larger size• May be hardened to improve wear qualities after boring• Easy steps to speedy productivity 1. Install pad into master collet or collet pad top jaws 2. Insert pins to hold the pad in the closed position 3. Drill and finish bore, or step to the desired size 4. Remove the pins

SHAPES AND SPECIALS

PADS FOR TOP JAWS

• Pads for master collets and feeder pads are available from stock in round hexagon and square shapes. Unique shapes, eccentric, rectangles, octagons or off-center holes can be custom made• Collet and feeder pads are available in a variety of materials including high quality alloy steel, bronze and other phenolics • Most pads are hardened for maximum resilience • All collets are manufactured for maximum concentricity

• Concentricity of round, smooth pads is .002" T.I.R. or better at the face

Tighter tolerances are possible upon request.

• Lower tooling cost - Collet Pads are less expensive than boring out top jaws• Top jaws do not have to be machined in order to grip standard shapes• Reduce set-up time - Collet Pads are changed much faster than chuck jaws and facilitate set-up for a variety of sizes• Minimize scrap - Positive holding action grips workpiece firmly in position, reducing scrap loss• Increase tool flexibility - Collet Pads can be used economically for both bar and chucking work. They are offered for chuck sizes 8 inches through 18 inches and for all standard makes of chucks• Reduce storage space - Collet Pads are much smaller than jaws and require less storage space

• Specifically designed for NC/CNC turning centers• Superior's Super-Grip® bidirectional collet pads feature serration lands which penetrate the work for a positive gripping action (better than competing pads)• Unique and exclusive pyramid configuration provides equal gripping force along spindle axis in both forward and reverse spindle rotation• Assures smooth bar feeding while precluding "push back" from cutting forces• Ideally suited for exotic or hard materials such as iconel, stainless...and many others• Square, hexagon and octagon pads are furnished with annular serrations

Super-Grip® is a registered trademark of Superior Cincinnati

COLLET PAD FEATURES AND BENEFITS

6.

• Dovetail feature machined in the middle diameter of each segment• Clamp screw engages the dovetail feature to secure the pad segment(s) into the master collet• Used primarily on multi-spindle automatics and in some Collet Chucks• Designed to be changed without requiring the removal of the master collet from the chuck• Machinable Emergency Collet Pads available from stock• "S" Style Pads can be purchased in a variety of shapes, sizes and materials• Wrenches and clamps are sold separately (see page 11)

• Available for popular jaw chucks• Used in jaw chucks with collet pad top jaws• For chucks that have master jaws that accept standard Turret Lathe Collet Pads• Increases flexibility of jaw chucks by eliminating wasted time spent on jaw change over• Offered in distinctive bidirectional serrated design to accommodate various stock diameters within working range of the chuck• Machinable Emergency Collet Pads available from stock• Jaw Chuck Pads can be purchased in a variety of shapes, sizes and materials

• Identified by square lugs threaded into the periphery of the ground diameter closest to the face of the master collet• By turning the set screws, the lugs expand into slots thus securing the pad to the master collet• Master collet allows changing of the pad(s) without removing the master from the spindle• Pads are primarily used on multi-spindle automatics but are used in some Collet Chucks• Machinable Emergency Collet Pads available from stock• Martin Type Pads can be purchased in a variety of shapes, sizes and materials• Lugs can be purchased separately (see page 13)

• Seated in the recess within the master feeder• One pad has a slot for engaging a key of the master feeder to eliminate pad rotation• For maximum wear the Feed Finger Pads are hardened• Pads are quickly and easily changed• Feed Finger Pads can be purchased in a variety of shapes, sizes and materials

• Threaded holes in the periphery of the middle diameter are used to secure the pads to the master collet or top jaws• These pads were originally used on turret lathes, thus their name• Turret Lathe Pads are commonly used with Collet Chucks and collet pad top jaws• Machinable Emergency Collet Pads available from stock• Turret Lathe Pads can be purchased in a variety of shapes, sizes and materials• Mounting screws are sold separately (see page 9)

• Manufactured for use in all Superior Cincinnati Collet Chucks• Also available for many other manufacturer's Collet Chucks• Designed for bar and chucking work, available from stock with up to 6" chuck capacity• Machinable Emergency Collet Pads available from stock• Collet Chuck Pads can be purchased in a variety of shapes, sizes and materials

Collet Pad Index

7.

JAW CHUCK PADS Page 14

FEED FINGER PADS (MODEL "A") Page 12

MARTIN TYPE PADS Page 12

"S" STYLE PADS Page 10

TURRET LATHE PADS Page 8

CUSTOM QUOTE REFERENCE GUIDE AND ORDERING INFORMATION Pages 18- 19

COLLET CHUCK PADS Page 16

GISHOLT

# 3 1 1/2 1 1/2 1 3/8 1 1/8 1060(4 Split)3Y-7112-A

3X-7731 Rd.3X-7735 Hx.3X-7733 Sq.

# 3, 4 2 2 1 3/4 1 3/8 1061(4 Split)4Y-7112-A

4X-7731 Rd.4X-7735 Hx.4X-7733 Sq.

# 55-AR 1-L

2 1/2 2 1/2 2 1/8 1 3/4 1063(4 Split)5Y-7112

5X-7731 Rd.5X-7735 Hx.5X-7733 Sq.

# 55-AR 1-L

2 1/2 2 1/2 2 1/8 1 3/4 1026(3 Split)11X-6762

11X-7737 Rd.11X-7741 Hx.11X-7739 Sq.

# 5 5 ABC 3 3 2 5/8 2 1/8 1022

(3 Split)5X-78495X-7843 Rd.5X-7847 Hx.5X-7845 Sq.

1-L2-L 3 1/2 3 1/2 3 2 7/16 1066

(4 Split)12X-6561

2-L-06002-B

12X-7731 Rd.12X-7735 Hx.12X-7733 Sq.

1-L2-L 3 1/2 3 1/2 3 2 7/16 1067

(3 Split)12X-676212X-7737 Rd.12X-7741 Hx.12X-7739 Sq.

# 5, 5-AR2-L, 3-L 4 1/2 4 1/2 3 7/8 3 1/8 1023

(4 Split)13X-65613-L-6561

13X-7731 Rd.13X-7735 Hx.13X-7733 Sq.

# 5, 5-AR2-L, 3-L 4 1/2 4 1/2 3 7/8 3 1/8 1068

(3 Split)13X-6561-B13X-7716 Rd.13X-7720 Hx.13X-7718 Sq.

# 3, 4 2 2 1 3/4 1 3/8 1025(3 Split)

4Y-7138-A4Y-7138-B

4X-7731-A Rd.4X-7735-A Hx.4X-7733-A Sq.

BARDONS & OLIVER#3, 5

#7#10

1 1/22

3 1/16

1 1/22

3 1/16

1 19/641 23/32

2 5/8

1 3/641 13/322 5/32

109610971091

MACHINESIZE

MACHINEMODEL

SUPERIORNUMBER

MASTER COLLETNUMBER

MASTER PADNUMBERROUND HEXAGON SQUARE

COLLET PAD CAPACITY

JONES & LAMSON

# 3 Universal 1 1/2 1 1/2 1 1/4 1 1080(3 Split)10463

10482 Rd.11729 Rd. Serr.

11232 Hx.11233 Sq.

# 4 Universal 1 3/4 1 3/4 1 1/2 1 1/4 1081(3 Split)11709

11710 Rd.11711 Hx.11712 Sq.

# 4 Universal 2 2 1 3/4 1 3/8 1082(3 Split) 19985

19992 Rd.19993 Rd. Serr.

19994 Hx.19995 Sq.

TURRET LATHE Conventional Style Collet Pads

8.


# 5 Universal7-A, 7-B, 7-D 2 1/2 2 1/2 2 1/4 1 3/4 1083

(3 Split)10464

10481 Rd.11725 Rd. Serr.

11236 Hx.115427 Hx. Serr.

11237 Sq.

# 5 Universal7-A, 7-B 3 3 2 5/8 2 1/8 1084

(3 Split)15246

15239 Rd.15502 Rd. Serr.

15421 Hx.15422 Sq.

# 5 Universal7-A, 7-B 3 1/2 3 1/2 3 2 3/8 1085

(3 Split)1989819896 Rd.19894 Hx.19893 Sq.

# 5 Universal7-A, 7-B 4 1/2 4 1/2 3 7/8 3 1/8 1086

(3 Split)1381880754 Rd.80756 Hx.80757 Sq.

JONES & LAMSON (continued)

90019002

9003

TURRET LATHE PAD NUMBER

1022, 1026, 1045, 1046, 1048, 1057, 1058, 1067, 1068, 10781025, 1027, 1071

1018, 1021, 1023, 1047, 1049, 1050, 1060, 1061,1063, 1081, 1082, 1097

5/163/8

5/16

SUPERIOR NUMBERSCREW SIZE

MACHINESIZE

MACHINEMODEL

SUPERIORNUMBER

MASTER COLLETNUMBER

MASTER PADNUMBERROUND HEXAGON SQUARE

COLLET PAD CAPACITY

Pad capacity limited by machine spindle bore.

TURRET LATHE Conventional Style Collet Pads

WARNER & SWASEY

# 2, # 3, #4, # 2EC, 16" EC

# 3# 4

1 1/2

1 3/42

33 1/2

1 1/2 1 5/16 1 1/16

2 1 3/4 1 3/8

# 51A 2 1/22 1/2 2 3/16 1 3/4

1027(3 Split)

1025(3 Split)

1026(3 Split)

461-1002462-1002

1369-1008

1129-11021369-1003

461-1003 Rd.461-1023 Hx.461-1024 Sq.

1129-1004 Rd.1129-1005 Hx.1129-1006 Sq.

471-1001471-1002 Rd.471-1003 Hx.471-1004 Sq.

1A2A 3 1/4 2 3/4 2 3/8 1024

(4 Split)404-1008404-1009 Rd.404-1028 Hx.404-1014 Sq.

3# 5 3 2 5/8 2 1/8 1022(3 Split)4669-1001

4669-1165 Rd.4669-1166 Hx.4669-1167 Sq.

4 1/2# 5 4 1/2 3 7/8 3 3/16

1018(3 Split)

1023(4 Split)

2779-10012779-1009 Rd.2779-1010 Hx.2779-1011 Sq.

4 1/22A3A 4 1/2 3 3/16 3 3/16 1021

(4 Split)533-1008533-1010 Rd.533-1011 Hx.533-1016 Sq.

63A 6 5 3/16 4 1/2 1014(3 Split)1959-7

1959-1003 Rd.1959-1004 Hx.1959-1005 Sq.

9.

90041014 7/16


Phone: (513) 272-1122Fax: (513) 272-0503

WHEN ORDERING COLLET PADS SPECIFY:Make of machine, machine size, machine model, number of sets required and Superior Cincinnati part number. One set of pads required for each spindle. A six spindle machine requires six sets of pads to equip a full machine; a single spindle machine requires one set. Special Collet Pads or items not shown on the above list are available on application and require a sketch or sample part for positive identification. Special discount based on quantity and cost justification available on application.

ACME-GRIDLEY (NATIONAL ACME)

1 1/4

2 1/4

2 5/8

3 1/2

4

G, G-4, GA-4, R, R-6,RA, RA-4, RA-6, RB-6, RB-8

GM32, GS32, AS32, AV32, GM32/6AV48, AS48, AA48

AV67, AS67

G, GA, R, R-4, RA, RA-4, RAS-4GA

C, G, GA, GA-4, R, R-4, R-6, RA, RA-4,RA-6, RA-8, RAS-4, RB, RB-6, RB-8

B, R, R-4, R-6, RA, RA-4, RA-6,RAS, RAS-4, RAS-6, RB, RB-6, RL

B, G, R, R-4, R-6, R-8,RA, RA-4, RA-6, RA-8, RL

G, G-4, GA-4, GR, M, R, R-6, R-8,RA, RA-6, RA-8, RB-6, RB-8

G, GA, M, MR, R-4, R-6, R-8,RA, RA-4, RA-6, RB-4, RB-6, RB-8

1 3/81 1/2

1 5/8

2

1 1/4

2 1/4

2 5/8

3 1/2

4

1 1/21 1/2

1 5/8

2

1 1/16

1 15/16

2 1/4

3

3 7/16

1 9/321 9/32

1 13/32

1 23/32

7/8

1 9/16

1 27/32

2 15/32

2 13/16

1 1/321 1/32

1 1/8

1 13/32

1212

1222

1226

1235

1240

1 5/82 3/8

1 1/22

1 1/41 1/2

1 7/8 & 22 1/4

2 1/2 & 2 5/83 & 3 1/4

3 1/245

1 1/41 1/21 5/8

22 1/4

22 5/8

2 1/42

2 5/8

2 19/3233 1/2

45

1 13/32

1 1/16

1 15/162 1/4

33 7/16

1 9/32

1 23/32

4 5/16

1 1/8

7/8

1 9/161 27/32

2 15/322 13/16

1 1/32

2 3/32

1 1/81 13/32

3 1/2

1 1/2 1 9/32 1 1/322 1 23/32 1 13/32

1216

12151220

121212151216

1222

1230123512401250

121212201226

121612201226

12152

12202

12262

1215

1216

1220

MACHINESIZE

MACHINEMODEL SUPERIOR

NUMBERROUND1 HEXAGON SQUARECOLLET PAD CAPACITY

"S" STYLE MASTER COLLET PADS

RB-6, RB-8BROWN & SHARPE

# 23B.S.A.# 138# 168CONE

GILDEMEISTER

Six SpindleSix Spindle

Four Spindle

GREENLEE

1 1/4 1 1/161 23/32

1 23/32

2 1/4

7/8

1 13/32

1 13/32

1 13/321 13/32

1 27/32

1 5/8

1 5/81 5/82 & 2 1/4

2 5/8

2 5/8

1 1/8

1 27/32

"S" STYLE Collet Pads For Single & Multiple Spindle Automatics

10.

22 5/8

1 1/4


"S" STYLE Collet Pads For Single & Multiple Spindle Automatics

1 Maximum capacity for round, serrated is 1/16" less than smooth except 1230, 1235, 1240 & 1250.2 Pad capacity limited by machine spindle bore.

HERBERT2

2 1/2

2 3/8

1 1/41 3/81 5/8

1 3/4 & 22 1/4

2 5/8 & 2 3/43 1/2

4

1 1/41 3/42 1/41 1/4

23

2 & 2 1/43

1 3/81 3/42 1/42 5/83 1/43 1/24 1/8

1 1/41 1/21 5/8

22 1/42 5/83 1/2

4

1 1/161 9/32

1 13/321 23/321 15/16

2 1/43

3 7/16

7/81 1/321 1/8

1 13/321 9/16

1 27/322 15/322 13/16

1 1/42

2 1/41 1/42 1/4

32 1/4

3

1 1/161 23/321 15/161 1/16

1 15/162 19/321 15/162 19/32

7/81 13/321 9/16

7/81 9/162 3/321 9/16

1 1/41 5/82 1/42 5/8

33 1/2

4

1 1/161 13/321 15/16

2 1/42 19/32

33 7/16

7/81 1/8

1 9/161 27/322 3/32

2 15/322 13/16

2 3/32

# 4# 5, 7

22 5/8

1 23/322 1/4

1 13/321 27/32

1 5/8 1 13/32 1 1/8

.111.145

4183-001-00014183-002-0002

4183-001-00004183-002-0000

12262

12162

12202

12152

1220

STYLE "S"PAD NUMBER

1212, 1215, 1216, 1220, 12261222, 1230, 1235, 1240, 1250

B SplineC Spline

CLAMPSSUPERIOR NUMBERWRENCH &

CLAMP TYPESPLINE

SIZE WRENCH

INDEX# B60

2 1 23/32 1 13/32 1220

1212

1222122612351240

1216

12202

12222

12222

1212

12221212

1212121612221226123012351240

1230

1230

MORI-SEIKI (SL-2)SL-2B

NEW BRITAIN# 52, 601, SL

1 5/8 1 13/32 1 1/8 1216TRAUB

A-56, A-60, TB-60, TS-60WARNER & SWASEY

OAB Six Spindle M-3300Five Spindle M-2500

1AB Single & Five Spindle M-2530

2AB Single Spindle M-3925, M-33801SC 5014-1006, 5034-1001

2SC, 2SC12, 5054-1003

1AB Single Spindle M-38800AB Single Spindle M-4415

WICKMANFive & Six Spindle

Five, Six & Eight SpindleSix Spindle

Single & Four SpindleSix Spindle

Six SpindleSingle & Six Spindle

# 52, 60, 601# 41, 61, 62

# 61, 415, 817# 61, 62

# 26 Single Spindle, 126, 626, 828# 635# 640

WRENCHES & CLAMPS FOR STYLE "S" MASTER COLLETS

MACHINESIZE

MACHINEMODEL SUPERIOR

NUMBERROUND1 HEXAGON SQUARECOLLET PAD CAPACITY

"S" STYLE MASTER COLLET PADS

11.


Phone: (513) 272-1122Fax: (513) 272-0503

MARTIN TYPE Collet Pads & Model "A" Feed Finger Pads

ACME-GRIDLEY (NATIONAL ACME)

1

2 5/8

3 1/2

44 3/4

5 1/8, 5 1/2

C, R, R-4, R-6,RA, RA-4, RA-6, RAN-6, RAS-6

G, G-4, GA-4, R, R-6,RA, RA-4, RA-6, RB-6, RB-8

C, G, GA, GA-4, R, R-4, R-6, RA, RA-4,RA-6, RA-8, RAS-4, RB, RB-6, RB-8

B, R, R-4, R-6, RA, RA-4, RA-6,RAS, RAS-4, RAS-6, RB, RB-6, RL

M, R, R-6, R-8,RA, RA-6, RA-8, RB-6, RB-8

M, MR, R-6, R-8,RA, RA-4, RA-6, RB-4, RB-6, RB-8

1 1/4

1 5/8

2

1

2 5/8

3 1/2

44 3/45 1/8

1 1/4

1 5/8

2

15/16

2 9/16

3 7/32

3 7/84 7/16

5

1 3/16

1 1/2

1 7/8

27/32

2 1/4

3

3 1/24

4 1/2

1 1/16

1 13/32

1 23/32

21/32

1 13/16

2 1/4

2 3/43 1/83 1/2

13/16

1 1/16

1 5/16

13/16

2 3/16

2 3/4

3 3/83 13/16

4 3/8

1

1 5/16

1 5/8

11/16

1 27/32

2 7/16

2 7/83 3/8 10423 5/8

7/8

1 5/32

1 13/32

1036

1038

1035

1017

1044

1031

1033

1037

2042

2036

2038

2035

2017

2044

2031

2033

2053

MACHINESIZE

MACHINEMODEL COLLET PAD CAPACITY

MARTIN TYPE1 MASTER COLLET PADS

SUPERIORNUMBER

SUPERIORNUMBER ROUND HEXAGON SQUAREROUND HEXAGON SQUARE

FEED FINGER PAD CAPACITYMODEL "A" FEED FINGER/PUSHER PADS

RB-6, RB-8M, RA-4, RB

M, RB-4

For Single & Multiple Spindle Automatics

2 1/2, 2 5/8

CONE4 Vertical & 6, SL, SK, SW, TC, TK 1

1 1/41 1/21 5/8

22 1/4

33 1/83 1/2

44 1/44 3/4

20602036

2032

20532033

2029203820342034

20172035

20192042

10311036

1032

10531033

1029103810341034

10171035

10191042

1 1/41

1 1/2

21 5/8

2 1/42 5/8

33

43 1/2

4 1/44 3/4

1 1/1627/32

1 9/32

1 23/321 13/32

1 15/162 1/4

2 9/162 9/16

3 1/23

3 5/84

7/811/16

1 1/32

1 13/321 5/32

1 19/321 27/32

2 1/82 1/8

2 7/82 7/16

33 3/8

1 3/1615/16

1 3/8

1 7/81 1/2

2 1/82 9/16

2 13/162 13/16

3 7/83 7/32

4 1/84 7/16

1 1/3213/16

1 3/16

1 5/81 5/16

1 27/322 3/162 7/162 7/16

3 3/82 3/4

3 9/163 13/16

27/3221/32

15/16

1 5/161 1/16

1 1/21 13/161 31/321 31/32

2 3/42 1/4

2 7/83 1/8

12.

4 & 6

55 1/4

6

20112044

101110441043

55 1/8

6

4 5/164 1/25 1/8

3 1/23 5/84 1/4

4 23/325

4 1/164 3/8

3 5/163 1/2

INDEX# C29 & B30# 36 & B42# 52 & B60

13/161 3/161 7/8

23/321 1/321 5/8

9/1627/32 20601 5/16

2030

20531

1 3/427/32

1 17/3211/16 10361 1/4 1040

NEW BRITAIN# 40, 51, 60, 226, 263, 408, 608

# 52, 601, SL# 41, 42, 61, 62, 415, 656

# 41, 42, 61# 41, 42, 61, 62, 415, 656

#26, 42, 126, 626, 826# 126, 635

# 450

11 1/41 5/8

5 1/4

22 1/42 5/83 1/2

15/161 3/161 1/2

5

1 7/82 1/8

2 9/163 7/32

13/161

1 5/16

4 3/8

1 5/81 27/322 3/162 3/4

21/3213/161 1/16

3 1/2

1 5/161 1/2

1 13/162 1/4

11 1/4

27/321 1/16

11/167/8

1 5/82

1 13/321 23/32

1 5/321 13/32

2 1/42 5/8

1 15/162 1/4

119/321 27/32

3 1/2 3 2 7/16

1036103110331037102810381035

20362031203320372029203820352044


MACHINESIZE

MACHINEMODEL COLLET PAD CAPACITY

MARTIN TYPE1 MASTER COLLET PADS

SUPERIORNUMBER

SUPERIORNUMBER ROUND HEXAGON SQUAREROUND HEXAGON SQUARE

FEED FINGER PAD CAPACITYMODEL "A" FEED FINGER/PUSHER PADS

1 1/41 3/42 1/4

4 1/2

1 1/423

2 1/2

3 1/2

34 1/2

43

2 & 2 1/4

10311040

10311052•10341026

10381017

10521034

1 3/41 1/4

2 1/4

2 1/41 1/4

32 1/2

52 5/8

4

2 1/43

4 3/4

1 3/41 1/4

2 1/8

2 1/81 1/4

2 13/16

4 7/16

3 7/32

2 9/164 7/16

2 1/83 7/324 7/16

1 17/321 1/16

1 27/32

1 27/321 1/16

2 7/16

3 13/16

2 3/4

2 3/163 13/16

1 27/322 3/4

3 13/16

1 1/47/8

1 1/2

1 1/27/8

1 31/32

3 1/8

2 1/4

1 13/163 1/8

1 1/22 1/43 1/8

1 17/321 1/16

1 15/16

1 15/161 1/16

2 9/162 3/164 5/162 1/43 1/2

1 15/162 9/16

4

1 1/47/8

1 19/32

1 19/327/8

2 1/81 3/43 1/2

1 27/322 7/8

1 19/322 1/83 3/8

1052

1011•

1042•

20612040

206120522034

2 13/16 2 7/16 1 31/32 2034

20352

203820422

2052

20522

2042

20422

20352

WARNER & SWASEYOAB Six Spindle M-3300

Five Spindle M-25001AB Five Spindle M-2530

2AB Single Spindle M-3925, M-33802AB Single Spindle M-3925, M-3380 (471)

3 AB M-3995SC15 M-4820-1SC15 M-4820-2SC15 M-4890

1SC 5014-1006, 5034-1001

2SC15, 2SCL 5094-10042SC, 2SC12, 5054-1003

1AB Single Spindle M-38800AB Single Spindle M-4415

MARTIN TYPE Collet Pads & Model "A" Feed Finger Pads

For Single & Multiple Spindle Automatics

13.

11 3/4

2

4 1/8

2 1/42 1/42 5/83 1/2

11 3/4

2

4

2 1/42 1/42 5/83 1/2

15/161 1/21 7/8

3 7/8

2 1/82 1/8

2 9/163 7/32

27/321 17/321 23/32

3 1/2

1 15/161 15/16

2 1/43

13/161 5/161 5/8

3 3/8

1 27/321 27/322 3/162 3/4

27/321 1/161 5/16

2 3/4

1 1/21 1/2

1 3/162 1/4

11/161 1/4

1 13/32

2 7/8

1 19/321 19/321 27/322 7/16

10361040103710521029103810351017

20362033205320522029203820352017

WICKMAN

Four & Six SpindleFive, Six & Eight Spindle

Six Spindle

AlteredSix SpindleFive Spindle

All Feed Finger Pads are supplied as hardened steel pads. Martin Collet Pads and Feeder/Pusher Pads are not returnable.

Lugs can only be used with Superior Cincinnati pads.

5/32 Hex

5/32 Hex

1/4 Hex

9009-002-0000

9009-001-0000

9009-003-0000

MARTIN PAD NUMBER

1011, 1016, 1017, 1019, 1028, 1029, 1034,1035, 1038, 1042, 1055

1010, 1031, 1032, 1033, 1036,1037, 1039, 1040, 1052

1043, 1074, 1087

3/8

1/2

3/4

SUPERIOR NUMBERLUG SIZE WRENCH SIZE

WHEN ORDERING COLLET PADS SPECIFY:Make of machine, machine size, machine model, number of sets required and Superior Cincinnati part number. One set of pads required for each spindle. A six spindle machine requires six sets of pads to equip a full machine; a single spindle machine requires one set. Special Collet Pads or items not shown on the above list are available on application and require a sketch or sample part for positive identification. Special discount based on quantity and cost justification available on application.


Phone: (513) 272-1122Fax: (513) 272-0503

1 All Martin Type Collet Pads are interchangeable with all Martin Type and Model "M" Masters.2 Pad capacity limited by machine spindle bore

14.

AUTOBLOK

HY-MCD MCD RCDRCA RCM RCC

10-590-12-A08

1749

91619171

91019111913191419151

10-590-15-A08

10-590-15-A1110-590-18-A11

91-430-10-A6

91-430-12-A8

12

15

1518

10

12

CUSHMAN

PRATT BURNERD

STYLE DIAMETER

6 1/28

101215

10271025102610221018

102710251026

10261026102610261018101810261026

1025

1026107810781078

10261022

1049 or 1018 w/Top Jaws

1049 or 1018 w/Top Jaws

1014 w/Top Jaws10271025102610221049

10141014101410261022

10221018

REFERENCE DESCRIPTION SUPERIOR NUMBER

04-225878

04-22587898-226441

98-226441

Round SmoothRound Serrated

Hexagonal SmoothHexagonal Serrated

Square SmoothSquare Serrated




98-226716

98-214630

98-22771898-22679298-226793

98-22587898-226441

0241002420

03520 (Discontinued)03560 (Discontinued)

02400

X21XXX26XX

X21XXX26XX

X17XX

X38XXX46XX

X31XX

660XX760XX

X50XX

98-226760

8 1/410121620

6 1/28 1/4

8 1/410.43

10121518202424

JAW CHUCK PADS





SP – ITW WORKHOLDING

10491049

15CC-32518CC-325

1518

15CC18CC

10261022

10418CC-32510CC-32512CC-325

81012

8CC10CC12CC




Wide RangeSerrated

15.

CUSHMANSTYLE DIAMETER REFERENCE DESCRIPTION SUPERIOR NUMBER

JAW CHUCK PADS (continued)

X – Denotes any number or letter (or series of numbers or letters) within a particular product line.Wide Range pads are only available with serrated I.D.

ITEM/SERIES HURON TOP JAW CHUCK CAPACITY SUPERIOR NUMBERKITAGAWA

DESCRIPTION

B206 B206 CPJ 1027 1.750 1027B208 CPJ 1027B208 CPJ 1025B208 CPJ 1026

B208 2102710251026

B210 CPJ 1022B210 CPJ 1025B210 CPJ 1026B210 CPJ 1027

B210 2.953

1022102510261027

B212 CPJ 1022B212 CPJ 1025B212 CPJ 1026

B212 3.583102210251026

B215 CPJ 1018B215 CPJ 1022

B215 410181022

B218 CPJ 1018B218 CPJ 1049

B218 Please call for availability10181049


Phone: (513) 272-1122Fax: (513) 272-0503




10471057

98-226791-XX98-226418-XX

1810

10-590-18-A1191-430-10-A6

10481047

104898-226860-XX98-226860-XX98-226791-XX

121515

10-590-12-A0810-590-15-A0810-590-15-A11

SP-ITW WORKHOLDING

105018CC-355-X18FACC180, CC180

10461050

104510CC-355-X12CC-355-X15CC-355-X

101215

FACC100, CC100FACC120, CC120FACC150, CC150

Wide RangeSerrated

105898-233613-XX1291-430-12-A8

FOR ILLUSTRATION PURPOSES ONLY

16.

CDSCNSCRS

COLLET CHUCK PADS

ITEM/SERIES CHUCK CAPACITY CHUCK MODEL NUMBER DESCRIPTION SUPERIOR NUMBER

CDS-16, CNS-16, CRS-16

CDS-22, CNS-22, CRS-22CDS-26, CNS-26, CRS-26CDS-30, CNS-30, CRS-30

CDS-40, CNS-40, CRS-40

1 5/8

2 1/42 5/8

3

4

1216

122212261230

1240

SUPERIOR CINCINNATI

CDS-20, CNS-20, CRS-202 1220

CDS-35, CNS-35, CRS-353 1/2 1235

CNT-15, CRT-15CNT-20, CRT-20CNT-25, CRT-25CNT-30, CRT-30CNT-45, CRT-45CNT-60, CRT-60

CDDCDD-15CDD-20

CNTCRT

1 1/22

2 1/23

4 1/26

1 1/22

10271025102610221049101410711025

ATS732A01SJ55-XXX 2 XX-S20TLS PS 1220732APPX01-XX

726A01SC318-XXX782ASC321-XX

782APP785F111-XX

740AC322-XX415XX-XXX

415XXX-XXX420XXX-XXX420XXX-XXX422XX-XXX

426XXX-XXX426XXX-XXX430XXX-XXX435XXX-XXX440XX-XXXX450XX-XXX

22 5/8

33

3 1/24

1 1/21 1/2

22

2 1/42 5/82 5/8

33 1/2

45

XX-S20TL PPXX-S26TLS PS

XX-S30TLSXX-S30TL PPXX-S35TLSXX-S40TLS

XXXXX-S15HXX-S15W

XXXXX-S20H, HSXX-S20WXX-S22H

XX-S26H, HSXX-S26W

XX-S30H, HSXXX-S35H, HSXXX-S40H, HS

XX-S50H

12201226123012301235124012151027122010251222122610261230123512401250




CB-NB/S

CB-ND/S

CB46-NB/S16CB65-NB/S20CB65-NB/S22CB80-NB/S26CB80-NB/S30CB65-ND/S20CB65-ND/S22CB80-ND/S26CB80-ND/S30

121612201222122612301220122212261230

MICROCENTRIC1 5/8

22 1/42 5/8

32

2 1/42 5/8

3









Phone: (513) 272-1122Fax: (513) 272-0503 17.

CB-NDR/S

CB65-NDR/S20CB65-NDR/S22CB80-NDR/S26CB80-NDR/S30

1220122212261230

MICROCENTRIC (continued)2

2 1/42 5/8

3

COLLET CHUCK PADS (continued)

ITEM/SERIES CHUCK CAPACITY CHUCK MODEL NUMBER DESCRIPTION SUPERIOR NUMBER

CB-NS/SCB46-NS/S16CB65-NS/S20CB65-NS/S22

121612201222

1 5/82

2 1/4

2 PB20-XX




1220

PRATT BURNERD

FBXX-XXX

FB6-20FB8-20FB8-27

FB10-30FB10-32AFB10-32BFB11-31FB11-40FB14-55

122012201226122612301230123012351250




PRODUCTION DYNAMICS (DIVISION OF LEXAIR, INC.)22

2 5/82 5/8

333

3 1/25

ROYAL PRODUCTSAccu-LengthTM

42974, 42976 2 ALS-20 1220

Smart Chuck Series42809, 42812

42813, 42815, 42818

45108

1 5/82

2 5/822

2 5/8

CDC-54QCCDC-66QCCDC-80QC

S-20S-20S-26

12161220122612201220

12261230

12262 5/8 S-26

3 S-30

4511045112451144511545116451184511945120

33 1/2

44

S-30S-35S-40S-40

1230123512401240







X – Denotes any number or letter (or series of numbers or letters) within a particular product line.Accu-LengthTM is a registered trademark of Royal Products.


Phone: (513) 272-1122Fax: (513) 272-0503

Note: Dimensional data and capacities are shown in inches. Specifications and dimensional data are subject to change with design improvements. All pads available soft or hardened to 58-60 Rc.Specials: We make collet chucks and pads to fit your application.18.

FX-175 1.25 1032FX-205FX-225FX-306FX-338FX-520FX-543FX-830FX-835FX-845

FX-1050FX-1150FX-5011

1.802.252.603.002.002.252.623.254.254.75

103510291038103410531052103810341019104210421042




ITEM/SERIES CAPACITY WITH PAD DESCRIPTION SUPERIOR NUMBERFLEX-E-ON MARTIN S-STYLE

1215121612221226123012201222122612351250125012501250

COLLET CHUCK PADS (continued)

4.624.60

CUSTOM QUOTE REFERENCE GUIDE

Hexagon EccentricTo Corner

Hexagon EccentricTo Flats

Square EccentricTo Corner

Square EccentricTo Flats

Rectangle Eccentric-Short Side

Rectangle Eccentric-Long Side

Octagon EccentricTo Corner

Octagon EccentricTo Flat

RoundEccentric

Triangle

1. Order Hole Size:2. Order Hole, 2nd:3. Radius:4. Relief Diameter:5. Relief Length:

6. Depth of Step, 1st:7. Depth of Step, 2nd:8. Length of Extension:9. Off Center Distance:

19.

Call Customer Service to OrderUSA: (800) 875-8175

Phone: (513) 272-1122Fax: (513) 272-0503

e-mail: [email protected] through Friday, 8:00 A.M. – 5:00 P.M. EST3894 Virginia Avenue Cincinnati, Ohio 45227-3410

www.superiorcincinnati.com

Orders and requests for information are accepted through our distributor network; by telephone, facsimile, U.S. mail or e-mail. Orders placed incorrectly may be subject to a 20% restocking charge(s).

To place an order, check pricing, availability or to inquire about expediting services, please contact your local Superior Cincinnati distributor. Please be prepared to give the following information:Company Name or Customer NumberName and Telephone NumberAddressP.O. or Credit Card Number(MasterCard, Visa, American Express or Discover/Novus)A complete description of item(s) being ordered:Quantity Part Number(s)Delivery Date Required Shipping Preference

Open account credit is extended to companies with satisfactory credit references. If credit references are not quickly available, advanced payment, or credit card payment will speed up your first order.

Pads for master collets and feed finger pads are available from stock in round, hexagon and square shapes. Unique shapes, eccentric, rectangles, octagons or off-center holes, can be custom made with the help of our customer service department. Collet and Feeder Pads are available in a variety of materials including high quality alloy steel, cast iron, bronze and nylon to meet your workholding needs.

Open account credit terms are net 30 days.Special collet pads made to customer specificationare not returnable.

Standard Equipment All collet chucks come factory lubricated and ready for installation. Maintenance instructions, spindle adapter, drawtube adapter, and mounting bolts are included.

Machine Information: Manufacturer Model Serial NumberSpindle Information: 1. Spindle Nose 2. Spindle Thread Size 3. Diameter 4. Length/Depth 5. I.D. Taper/CounterboreDrawtube/Drawbar Information: 6. I.D.Thread 7. O.D. Thread Thread LH or RH 8. Length of Thread 9. Drawtube I.D. 10. Drawtube/Drawbar O.D. 11. Maximum (Forward) 12. Minimum (Retracted)

Placing an Order or Requesting Information

Customer Service & Quotations

New Customers

Terms

Shipping

Collet Chuck Information Needed

Examples

We offer same day shipping on all in stock items ordered by 4:30 P.M. EST.

20 Steel21 Cast Iron22 Bronze

23 Nylon24 Square Face Steel25 Aluminum

10261026102610261026102610261026

15001500150015001500150015000000

1 1/2" Round Smooth – Steel1 1/2" Round Serrated – Steel1 1/2" Round Serrated – Cast Iron1 1/2" Hexagon Smooth – Bronze1 1/2" Square Smooth – Nylon1 1/2" Hexagon Serrated – Steel1 1/2" Square Serrated – SteelEmergency Collet Pad – Steel

200201211222233204205206

––––––––

––––––––

Collet Pad Ordering Instructions

XX = Material

1025 – XX0 Round Smooth – 1500 = (1 1/2") XX1 Round Serrated Four digit decimal XX2 Hexagon Smooth equivalent of the XX3 Square Smooth the size in inches XX4 Hexagon Serrated multiplied by 1000 XX5 Square Serrated XX6 Emergency XX7 Eccentric XX8 Octagon XX9 Rectangular XX10 Octagon Serrated

SuperiorCincinnatiSeries No.

I.D. Type I.D. Size

Documents

Collet Chucks & Collet Pads