Upload
ngoxuyen
View
356
Download
29
Embed Size (px)
Citation preview
SATURN http://saturntv
AKAI
CT-W29NTFPF E10
(TDA9351C39NA)
Szervizmd: UA mint a GALACTIC
On marks of the processor If to look at marks of the processor (is often specified the version of an insertion) it is possible also to try to learn the manufacturer. For example, CHANGHONG, marks the version of a microcode of the processor (to not confuse to insertion EEPROM), on system Chhhhhhhh That is, having seen on the processor of an inscription: CH05T1610, CH05T0102, CH08T0934, and , it is possible to assume with a high probability, that - CHANGHONG, and at the same time and find out possible analogues. Many identical the chassis, have identical
The chassis Model the Processor of Management the Videoprocessor the Input in the service menu.
3N10 MN18P73284DP NN5199
3S10 ST92185BN4B1/PBI STV2248C
: MENU AV ANAL.
3Y01LC863324A LA76810A
: Menu Menu Qviwe Mute : Timer : Menu
M28 TCL-A19V03.TO 8821CPNG4U88
: 0 + Display .: Factory OFF
M17 TCL-A02V01-T(87CM38N-3GP2) TB1238AN 0 + Display
M13 TCL-A02V01-T(87CP38N-4GP2) TDA1240 0 + Display
2132SF CH08T0934 5H32-3K49 TB1238AN .
5P60 TDA9363PS/N2/5I TDA9859H : CLOCK P.M. : .
5N10 SKY5N20 NN5198K
1. TV, VOL + VOL- TV 2. TV, PRG+ PRG- TV
5N11 S3C8849X26 AQB9147 (SKY-5N11) NN5198K
TV, VOL + VOL- TV
--------------------------------------------------------------------------------
M113
.
1. Volume=0, VOL- DISPLAY . D.
2. D. . ( OPT).
( ), ^ V , < > .
.
I2C. .
D 0752.
OK.
http://radioxpress.wz.cz/start.html
--------------------------------------------------------------------------------------
AKIRA 14LAS1/Bn EASTKIT TMPA8821CPNG4RJ1 PCB- HAOTE 0309
Factory Mode:
Volume=0, MUTE MENU . S. S, . S MENU , MUTE MENU.
D .
SLEEP.
----------------------------------------------------------------------------
AKIRA CT-21VBS3Wn, CT-21VBS3V. TMP87CM38N-3GN5, TMP87CK38N-2B46, HISENSE-EXPORT1 5H31-3PB3 MSIA 0349WA1 IYU640 (TMP87PS38N) TB1238, TA1275AZ
:
1. 12.
2. 38
3. MENU POS.LOCK ( 2 ).
4. MUTE .
5. 1 2 3 8. , M.
^ V , < > .
http://radioxpress.wz.cz/start.html
--------------------------------------------------------------------------------------
AKIRA CT-14HS9 processor ST6-ELAME2 PCB- HingWah 1-V0 5800-4S020-08(4S02)
Service Mode
.
: Skip Vol FineTune.
Prog+ Prog , Vol Vol+
.. MUTE . .
Service PIC
--------------------------------------------------------------------------------------
SS2 Chassis
LC863532 - 54D5, 54H7, 5Z00, 50S8, 50S9
0, MENU 6568.
--------------------------------------------------------------------------------------
CTS AB
mondial casa STV3682
SAA5531PS/M4/0657
RC2143
SERVICE.
I+
OP21 -03
OP22-08
- INST
- .
--------------------------------------------------------------------------------------
CN-9A processor CH08T0934 5H32-3K49 ; TB1238AN, TA1275
Volume = 0. MUTE MENU . D.
() () , () () . MUTE
-- http://radioxpress.wz.cz/start.html
--------------------------------------------------------------------------------------
TV HYUNDAI HU-D25A S3P8849XZZ-A089 5N11.
1. VOL+ VOL-- .
" MENU".
2. - 2 4 CN601 (ADJUST GND).
"KWTVA COMPUTER 11-23".
OK . "KWTVA SERVICE 11-23" --------------------------------------------------------------------------------------
SUPRA ST 21B55F
H-704V-05
SDA555XFL-A14
NN5198K -MSP3460G
- DISP.-MUTE-SLEEP-FUZZY-DISP.
--------------------------------------------------------------------------------------
SHIVAKI STV-2038 M4
LC863332A video - LA 76810A
2 16 . 1- - : FACTORY; . 2- - B/W ADJUST (. ); 3- - ADJUST () ..- ZOOM - .
--------------------------------------------------------------------------------------
ROLSEN C2119
- CH08T0934-5H32-3K49 8738N, TB1238AN, 2408(2404), TA8403K,FBT BSC62T, SC9028-023.
:
1. , "O".()
2. "MUTE" , "MENU" .
3. "D", .
, .
"Stand-by" .
--------------------------------------------------------------------------------------
92 TDA935X6X
SERV MODE
?-DU+VOL- TV
--------------------------------------------------------------------------------------
SUPER, MIYOTA, OPERA, WARON
TFT TV 5 - 7' ALL MODELS
LA76810A, TB1238 : LC863320A, LC863324A, LC863328A, LC863332B.
: . , . - (PROD). CH+, CH-, VOL-, VOL+. .
--------------------------------------------------------------------------------------
ORION T2157/67/97 (. LC863328A-5W63); T2567/97, T2967/97 (. LC86328A-5W63); STANDARD :
1. ''STAND BY'' ''RECALL'' .
2. ''VOLUME < '' ''0''.
3. ''VOLUME < '', ''RECALL'' .
* 1. , .*
:
S E R V I C E
FACTORY _____
B/W __________
ADJUST_______
SETUP ________
''RECALL'' .
* 1. , ''RECALL'' .*
''VOLUME < / > ''. ''P + / P '' ''VOLUME < / > ''.
.
''POWER''.
--------------------------------------------------------------------------------------
LCD TV SUPERTECHNIKS TV-6600-st, HT-555-26LAS5904(?) , LC 863332B ( 526 3J06 ). , : HT-001 YX7253-1 .
:
0, VOL - RETURN ( ) .
1- - FACTORY
2- - B/W ADJUST
3- - ADJUST , - 0 9. MUTE . 7.
--------------------------------------------------------------------------------------
ERISSON S14, ERISSON 2120 ERC 21NI60 3S10
: ST92185BN4B1/PBI 3S10B-ENG/RUSS
.: STV2248C
:
Menu - AV - ANAL
OK -
PP
--------------------------------------------------------------------------------------
ST-210
: T1238Z . .: MTV212MS64U
.
MUTE- AV- MENU- POWER. - .
VOL+.
VOL+ VOL-.
P+ P-.
--------------------------------------------------------------------------------------
SHIVAKI STV-101 HOTEL MODE
HOTEL MODE?
UP TDA9381PS/N2/3I1300
4 . LPLUS9381-01
- SVC - , !
, . .
--------------------------------------------------------------------------------
ERISSON .LC863328A LA76810
1) RECALL
2)VOLUME RECALL
3) VOLUME RECALL
4) VOLUME RECALL
--------------------------------------------------------------------------------
Broksonic combo service menu
Press Volume Down Until At zero Continue Holding And Press Channel Up Or
Down On Remote. Use Volume Up And Down To Set Parameters. Press 8 On
Remote To Exit.
--------------------------------------------------------------------------------
SUPRA ST 21B55F
H-704V-05
SDA555XFL-A14
NN5198K -MSP3460G
- DISP.-MUTE-SLEEP-FUZZY-DISP.
--------------------------------------------------------------------------------
LC863322B (53W3 4F05)+LA76810A+LA7642+AN5265+2408
LC863322B (5Z51 3KDB)+LA76818A+LA7642+AN5265+24C08.
.. ADJUST MENU ( ). ADJUST MENU MUTE. +, - , +, - .
--------------------------------------------------------------------------------
8821
AXXON
:
1. , "O" ().
2. "Vol " TV, "DISP" .
3. "S", .
"+" "", "Vol+" "Vol", TV, .
"Stand-by" .
EEPROM
V/V - .. (, , )!
, ... !!! - !...
:
--------------------------------------------------------------------------------
SONY Panasonic Jinlipu
CPU M37160
video M61260(64)
1.
2.
3. Vol+
4.
"menu"
--------------------------------------------------------------------------------
TV AKAI CT-20WKD
726A5215 AN5195K-C
- vol+ vol- .
. 1 - 9 , . +-
- power off.
--------------------------------------------------------------------------------
TCL EC2918
- 40-2959m2-ma
- VCT 3831A 4C TCL m35v01-mn tl00
TCL3130 vct enter service menu :
1) Handed a remote controller and press "MENU" key till entered "Preset"
page, then press "P-"or"P+" for choose this item "OSD LANGUAGE";
2) Press "V-"or "V+"key will enter OSD LANGUAGE options, don't failed
to select "ENGLISH".(pls don't stay in this page too long time,
otherwise,this operation will be invalided, you must to press "OK" key
quite the adjustmet screen, and try it again );
3) At the same time, press "CAPS" key,then press "REVEAL" key within
--------------------------------------------------------------------------------
Rolsen 100 : (C29R100, C29R140, C29R142, C29R148) .
Rolsen 100 RC-5 ( / 3010)
( ):
1. SVC 1/2 ( 1 11)
2. "" .
--------------------------------------------------------------------------------
BBK LT2003S, BBK LT2008S, BBK LT1703S ( DVD)
, "MENU" , "STANDBY". , , , .
--------------------------------------------------------------------------------
BBK LT2007S ( DVD)
, "SOURCE" "OPEN". , , , .
, DVD, "SETUP" "9210".
--------------------------------------------------------------------------------
For chassis TV-84 , TV-95 , TV-99 service mode you need remote control with teletext (even when tv is without texrt , for example RC-514 or some universal R.C ) . Press folowing keys : EXPAND ( text size key) , MIX ( text mix key ) and BLUE . Also have chassis TV-95 and TV-99 schematic diagrams ( on paper ) if someone will need them i will find scaner and scan . Chassis and remote : http://www.wimtv.be/techniforum/viewtopic.php?t=708&highlight=provision
Romas
--------------------------------------------------------------------------------
CrownMustang CM-2007R
To open the remote control, clearing the superior cover. To use the keys that do not have external access and that are underneath "previous Channel" and "Sound".With CHANNEL +/- the item selects, with VOL +/- its value fits.
--------------------------------------------------------------------------------
Sansei TVR2019 To use the remote control of the user. In order to enter to the way
SERVICE to have tight key MENU of the television set and to tighten
key 2 of the remote control.
In order to be able to fit the fine syntony of a channel, to have tight key MENU of the television set and to tighten key MENU of the remote one.
fter replacing the EPROM did you reinitialise the TV.
--------------------------------------------------------------------------------
LC863332B - 52Z6
LA76818A
EEPROM24c08
LC863322B (53W3 4F05) + LA76810A + LA7642 (Seam)
+ AN(CS)5265 ( ) + 2408
ADJUST MENU ( ). ADJUST MENU MUTE. +, - , +, - .
( ) :
B/W BALANCE
S-BRI - 76
MUTE .
( ).
ADJUST MENU 0
H.PHASE 11
V.SIZE 48
V.LINE 23
V.POSITION 32
V.SC 13
NT.H.PHASE 00
NT.SIZE 00
NT.LINE 00
NT.V.POSI. 00
NT.V.SC 00
ADJUST MENU 1
H.BLK.LEFT 0
H.BLK.RIGHT 0
RF.AGC 12
VOLUME OUT 127
OSD CONT 60
OSD H.POSI. 6
OSD V.POSI. 17
DIGITAL OSD ON
ADJUST MENU 2
IC SELECT LA76810 (LA76832, LA76818, LA76828)
POWER OPTION ON
POWER LOGO ON
SCREEN OPT. ALL
SKREEN TIME 1
SEARCH CHECK ON
SEARCH SPEED LOW
BAND OPTION PORT/L (LA7910, TUNER, PORT/H)
AV OPTION 2
V.MUTE P.OFF ON
ADJUST MENU 3
BACK COLOR BLUE
BLC PROCESS ON
LINE MODE ON
CALENDAR ON
GAME OPTION ALL
ENGLICH OSD ON
TURKISH OSD ON
RUSSIAN OSD ON
PERSIAN OSD ON
ARAB OSD ON
ADJUST MENU 4
STEREO OPT. ON
STEREO IC OFF
WOOF/H.PHONE WOOF
SIF M/N ON
SIF B/G ON
SIF I ON
SIF D/K ON
SENSITIVITY OFF
ZOOM OPTION ON
BACK BAR ON
ADJUST MENU 5
PAL OPTION ON
N3.58 OPTION ON
N4.43 OPTION ON
SECAM OPTION ON
COLOR AUTO ON
SUB.CONT> 25
SUB.COLOR 30
SUB.SHARP 20
SUB.TINT 32
BLK.STR.DEF ON
ADJUST MENU 6
H.FREQUENCE 32
AFC GAIN AUTO
V.SETUP 1
AV IF STATUS OFF
VIDEO. LEVEL 7
FM.LEVEL 16
CD MODE 7
SOUND TRAP 4
B.GAM.SEL 2
RG.GAM.DEF OFF
ADJUST MENU 7
GRAY MODE OFF
VOL.FILTER ON
VIF.SYS.SW 38.0M
BRT.ABL.DEF. OFF
MID.STP.DEF. 0
EMG.ABL.DEF. OFF
BRT.ABL.TH. 0
LOW AC-IN 245
HIGH AC-IN 16
ADJUST MENU 8
R-Y/B-Y G.BL 8
R-Y/B-Y ANG 8
SECAM B-Y - DC 8
SECAM R-Y - DC 8
ADJUST MENU 9
ZOOM 1 V.SIZE 57
ZOOM 2 V.SIZE 32
--------------------------------------------------------------------------------
CHINA TV
Press display or Arrow button than press mute 3 time (rapidly)to enter service mode.
--------------------------------------------------------------------------------
:
1. TFT TV SUPER, MIYOTA, OPERA, WARON . LC863320A, LC863324A, LC863328A, LC863332B . , . - (PROD). CH+, CH-, VOL-, VOL+. .
2. 1. Volume 2. Volume -- Recall 3. Timer, Timer, Mute -
: , (RECALL (DYSPLAY)), (V-) . 'FACTORY'. 'C/B ADJUST' 'ADJUST' 'SETUP' 'NORMAL TV'.
3. RC: SKIP. --V. AFT.( -/-) * PIC .
4. : (MENU) (MENU) (V.WIEV) (MUTE)(SLEEP) - . CPU TV SET will go to factory mode .Press "TIMER" key to go to the nextfactory menu .
5. 2 13 (14) ( ).
6. . - 2 15 5 ( ). "LA76810 option menu 00". " +". 4 . , . , , . . , . , , , .
7. , 16 2 ( 528 LC863532. . - 2 , .. ). FACTORY, - , - - ADJUST MENU 0. ADJUST MENU 0 2 17 ( , ZOOM) ADJUST MENU 1, SETUP SELECT ON. ZOOM (2-17) 9 0. +, -, V+, V-. - 2-16.
8. LC863320A FUNAI MK11. 2 16 / 2461-103. 1- : FACTORY. . 2- :B/W ADJUST (. ). 3- ADJUST(). 4- SETUP ( ). 5- . -; +; V-; V+ . )
.
25 29 TCL-20 29F1 TCL-25 ; TV ,DISPLEI , GROL M37160M8H-081FP MENU6483 ;ST92185BN4B1\PBI MENU AV ANAL
--------------------------------------------------------------------------------
H-704V-05
SDA555XFL-A14 - DISP.-MUTE-SLEEP-FUZZY-DISP.
--------------------------------------------------------------------------------
- CH08T0934-5H32-3K49 8738N, TB1238AN, 2408(2404), TA8403K,FBT BSC62T, SC9028-023.
:
1. , "O".()
2. "MUTE" , "MENU" .
3. "D", .
, .
"Stand-by" .
EEPROM
No
1 RCUT 83
2 GCUT D8
3 BCUT 85
4 GDRV 49
5 BDRV 49
6 CNTX 3A
7 BRTC 47
8 COLC 30 (NTSC)
9 TNTC 3A
10 COLP 33 (PAL)
11 COLS 2E (SECAM)
12 SCNT 0E
13 CNTC 2B
14 CNTN 06
15 BRTX 23
16 BRTN 21
17 COLX 25
18 COLN 00
19 TNTX 28 - ()
20 TNTN 30 ()
21 ST3 09 C (3,58 NTSC TV)
22 SV3 09 C (3,58 NTSC AV)
23 ST4 09
24 SV4 10
25 SHPX 12
26 SHPN 05
27 TXCX 2A
28 RGCN 1E
29 *VM0 2C
30 *VM1 00
31 HPOS 06 (50Hz)
32 VP50 03 C (50Hz)
33 HIT 16 (50Hz)
34 HPS 04 (50/ 60) -
35 VP60 00 C (60Hz)
36 HITS 02 (50/ 60) -
37 VLIN 0C
38 VSC O8 S
39 VLIS FF (50/60Hz)
40 VHFL-L 10
41 VHFL-H 02
42 VHFH-L F0
43 VHFH-H 00
44 UHF-L D8
45 UHF-H 00
46 PNUM 7F
47 SNUM 20
48 ZHP 02
49 SBY 08 SECAM, B-Y
50 SRY 08 SECAM, R-Y
51 RAGC 21
52 AFT 27 (PIF VCO)
53 HAFC 00
54 V25 3E 25%
55 V50 4A 50%
56 BRTS 04 ()
57 VM2 00
58 MODE 50
59
60
61 SELF 00 TB 1238N P04OUT SEL
62 SELF VCO 80 VCO
63 SELF AGC 69
64 SELFBRTC 75
65 SELFCNTC 23 CNTC
66 SELFTNTC 00
67 SELF COLC 20 COLC
68 00
69 LANG 02
70
71
72 OSD 02 OSD
73 OPT 04
II.
1. IF.
2. ( 38,9)
3. 101 .
4. SELF VCO.
5. AFT OK.*
6. , AFT OK
, .
III.
1. RF ( 62db, -69 ).
2. AGC .
3. RAGC.
4. 3F , RAGC
0,4V .
RAGC , .
IV.
1. c c .
2. VLIN, HPOS, HITS, VP50, ,
280+/-2mm.
3. S- ( ) VSC.
V.
1. .
2.
3. RCUT, GCUT,BCUT 80; GDRV,BDRV 45; BRTS CO.
4. .
5. SCREEN , .
6. G2 . .
7. SCREEN, 25V
8. F6 BRTS .
9. .
10. GCUT BCUT RCUT .
11. .
12. LINE, .
13. GCUT BCUT, .
14. .
15. , .
VI.
1. .
2. .
3. BRTS , .
--------------------------------------------------------------------------------
Tv.HITACHI. C2556TN2
, "DK" . ( - Volume +) ( - P +) ""
MCU:SAA5296GP
HIT OSD VER1
K9V545
EEPROM:24W16
EPROM:27C512 -VERSIA=2R
:TDA9800 - TDA9875
TDA8841 2Y
--------------------------------------------------------------------------------
:
,
MAIN MENU
PICTURE
AUDIO
SOUND MODE
FEATURE
INSTALL
VOL + VOL -
.
MAIN MENU
PICTURE
AUDIO
SOUND MODE
FEATURE
INSTALL
SERVICE
EXIT SERVICE
+ , - SERVICE , VOL + VOL - .
TUNER . DK .
- . EXIT SERVICE .
VOL + .
!!! OPTIONS E2 FACTORY E2 Shipping . - .
- . .
--------------------------------------------------------------------------------
LCD TV SUPERTECHNIKS TV-6600-st, HT-555-26LAS5904(?) , LC 863332B ( 526 3J06 ). , : HT-001 YX7253-1 .
:
0, VOL - RETURN ( ) .
1- - FACTORY
2- - B/W ADJUST
3- - ADJUST , - 0 9. MUTE . 7.
--------------------------------------------------------------------------------
SONY Panasonic Jinlipu
CPU M37160
video M61260(64)
1.
2.
3. Vol+
4.
"menu"
http://monitor.net.ru/forum/viewtopic.php?t=61967
HUAZHOU - . .
. PASSWORD
123 , .
"panasonic" M37160M8-064FP, M61260. RS09-M301S ( ) . . CEKAM, - . , , . X / , , ! "panasonic" M37160M8-064FP, M61260. RS09-M301 / LT1388, - .(6+11) . "".
: , .
1 2,3,4 ..
!
, !
4 , 2 23 !
-
!
--------------------------------------------------------------------------------
TCL EC2918
- 40-2959m2-ma
- VCT 3831A 4C TCL m35v01-mn tl00
TCL3130 vct enter service menu :
1) Handed a remote controller and press "MENU" key till entered "Preset"
page, then press "P-"or"P+" for choose this item "OSD LANGUAGE";
2) Press "V-"or "V+"key will enter OSD LANGUAGE options, don't failed
to select "ENGLISH".(pls don't stay in this page too long time,
otherwise,this operation will be invalided, you must to press "OK" key
quite the adjustmet screen, and try it again );
3) At the same time, press "CAPS" key,then press "REVEAL" key within
--------------------------------------------------------------------------------
D- ( TD-18, PAEX0021, PAEX0045)
1. 0 , VOL-, DISPLAY ( S- ).
2. VOL-, DISPLAY. VOL- DISPLAY ( D ).
(, , ).
1. XANTRAX TC-1466, TC-2066S, TC-2166S, TC-2068S, TC-2168S ( ST-208, 209)
: TDA8842
: MTV212MS64U
(SERVICE MODE) :
MUTE, AV, MENU, POWER.
.
VOL+.
VOL+ VOL-.
P+ P-.
200-100-TV2K
: STV2246.
: ST92185.
SERVICE MODE : SERVICE, SERVICE V2.0.
P+, P-. -, +.
200-100-TV2K
MENU
(SERVICE)
1. .
1. SERVISE ( ).
2. , , .
3. .
:
LC863322B (53W3 4F05) + LA76810A + LA7642 (Seam)
+ AN(CS)5265 ( ) + 2408
ADJUST MENU ( ). ADJUST MENU MUTE. +, - , +, - .
( ) :
B/W BALANCE
S-BRI - 76
MUTE .
( ).
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
TV China. M37160 61260 29M03
, , , 3Y01. SONY, Panasonic, Samsung, GROL, HUAZHOU , 14 - 15'' ( / ). - 29M03 MAIN-3PCB. - M37160M8-064FP (2- - 42 ) + 24LC16 (08) + I2C. - M61260A (4- - 64 , M61264 61266) + ZQ 4,433 MHz. - BSC 25-05N2105A (BSC 24-01N4006E). 5 ( - ). HOT - TT 2170 ( VD + R = 47-51). -D78040 ( ). - HCF4053BE. - TDA2003 ( ). RC09-M301 ( , LT1388). TFT TV BON .. - SONY, Sharp, Sharp.
- EPROM.
, - ( VOL+), 0 9 - 10 .
/ LT1388 - - ( (6 +11) pin) "".
"menu".
--------------------------------------------------------------------------------
CHASSIS 5N11
--------------------------------------------------------------------------------
CHASSIS PB410
--------------------------------------------------------------------------------
tmp87ps38n_m17vr2
--------------------------------------------------------------------------------
tmp87ps38n_m13vr2v1
--------------------------------------------------------------------------------
PRIMA M2153.
-
TDA9381PS/N3/2/1831
PIT36
CE6691
- LINGHUA TDL-3N4G BXATB138----S
-STV9302
- AN17821A
- 5Q0765RT
ROLSEN, LG. .
: [MENU] , . [6] [4] [8] [3] . , M1~M4 , . M5~M0, [CALL] 1-4, , [LOCK] ( ) [5] [6] [7] [8] [9] [0] M5~M0. - M5~M0, [LOCK], .
--------------------------------------------------------------------------------
TV AKAI 29CT42FSQ ( Changhong) TDA9381-7NA
MENU -> 8500
0 9
--------------------------------------------------------------------------------
A3Y310
LC863532C La 76818 24c08
.
Caish
"quick" & vol(- )
.
2 26 .
(BC1202-01 ?) Erisson 1405 20- (SC 731202) , 24 .
.
1. Picture
2.
3.
--------------------------------------------------------------------------------
3Y01:
LC863 + LA768 (05, 10, 12, 18, 28,32) () + LA7642 (Seam) + AN(CS)5265 ( - ) + 2404(08) + ZQ 32,768 ().
AKIRA, ERISSION, SATURN, Opera, Jinlipy, Avest, SONY, PANASONIC, Sharp, Samsung, , , TFT TV (5-7).
LC863 - !!!! ( !!!!) 0.
- , MONITOR , , .
- :
1. LC863320A, - . EEPROM 24C04. , : ( 12 ) - , .
2. , LC863324 , . , , . , , , . . , , . I2C , . - , . . , I2C. "ST BY" , +5. , , . "ST BY". , . , , . , , . , , , . , , . , . . , . - , . ( ), . , . - , . , , . RESET, , . : , ? , , . 00 3F - 328, 332 .. .
.
LC863232B-57K7 (LA76810A) TFT TV "SATURN"
LC863316A KONKA K3731H1
LC863320A (EPROM 24C04) NASH CTV -N1495
LC863320A - 5N17 AKIRA CT-14HS9
L863320 - 5N94 (EPROM 24C04) - AKIRA CT-21PF9
LC863320A - 5R76 FUNAI MK11, ERISSON 14GX37A
LC863324A - 50Z0 - 2H00 (EPROM - 24C04) TFT TV Super 700
LC863324A - 52C9 AKIRA CT-14NX9R, AKIRA CT-21N29R, Erisson 2520
LC863324A - 5T51 AKIRA CT-14UX9R
LC863324A - 5T51 AKIRA CT-14JP9R
LC863324A - 5S68 Erisson 2120
LC863324A SATURN ST21NF2
LC863324 AKIRA -21G9
LC863328A - 5Z26 TFT SUPER SP-750A, TFT MIYOTA MY-6000R, General 21M40
LC863328A - 5Y23 "Sony" KV-SF14M90 (China)
LC863328A - 5Y29 TFT MIYOTA MY-750A, TFT TV MIYOTA MY-6000R
LC863328A - 5W63 Orion 2157/67/97, ERISSON 2107 (8), AVEST 5401- ( WX-5W63, : SICORE CX7461-103 - 4347T)
LC863328B Opera OP-1404TC
LC863328B - 52E5 Jinlipy 3728 (3730), Orion T2103FL
LC863332A SHIVAKI STV-2038 M4
LC863332A - 5S10 DAEWOO DCT-21S4G
LC863332A - 5Z51 - ERC 21SP50 (CE2181) ( FUNAI S2100PF, S2500PF)
LC863332B - 526 TFT TV SUPERTECHNIKS TV-6600-st, TFT TV AMSTRAD T7, Super SP-700 (TFT 5,5) - ( : HT-001 YX7253-1)
LC863332B - 52Z6 "Panasonic" (China), MATERIN B1414
LC863332B - 53W3 (EPROM 2408) - 4F05 SAMSUNG 14 (China)
LC863332B - 5Z51 - 3KDB (EPROM 2408) SAMSUNG 14 (China) - 5Z51 ( 543)
LC863440N, LA76818A, LA78040N, ENV59DA6G3 SANYO CE21AFB
LC863448W, 24c16, LA76818A, LA7642 SANYO CE21G4 AC5G
LC863532A - 5Z00 SC7461-103
LC863532B - 53L1 - 4WR1 (EEPROM A81D (24C08)) China TV: Sharp, Samsung, SONY .. ( 528)
LC863532B - 53L3 - 4RR2 (EEPROM A81D (24C08)) China TV: Sharp, Samsung, SONY .. ( 528)
LC863532-54D5 SAYONA 14 ( 05D5A 543).
:
LC863320A FUNAI MK11
000011h - ;
000012h - ;
000013h - ();
000014h - ();
000015h - (- );
000016h - ().
- 000000h-000008h
LC863328B (LC863324A) 11h 13h 00 , .
:
1. TFT TV SUPER, MIYOTA, OPERA, WARON . LC863320A, LC863324A, LC863328A, LC863332B . , . - (PROD). CH+, CH-, VOL-, VOL+. .
2. 1. Volume 2. Volume -- Recall 3. Timer, Timer, Mute -
: , (RECALL (DYSPLAY)), (V-) . 'FACTORY'. 'C/B ADJUST' 'ADJUST' 'SETUP' 'NORMAL TV'.
3. RC: SKIP. --V. AFT.( -/-) * PIC .
4. : (MENU) (MENU) (V.WIEV) (MUTE)(SLEEP) - . CPU TV SET will go to factory mode .Press "TIMER" key to go to the nextfactory menu .
5. 2 13 (14) ( ).
6. . - 2 15 5 ( ). "LA76810 option menu 00". " +". 4 . , . , , . . , . , , , .
7. , 16 2 ( 528 LC863532. . - 2 , .. ). FACTORY, - , - - ADJUST MENU 0. ADJUST MENU 0 2 17 ( , ZOOM) ADJUST MENU 1, SETUP SELECT ON. ZOOM (2-17) 9 0. +, -, V+, V-. - 2-16.
8. LC863320A FUNAI MK11. 2 16 / 2461-103. 1- : FACTORY. . 2- :B/W ADJUST (. ). 3- ADJUST(). 4- SETUP ( ). 5- . -; +; V-; V+ . )
9. - .
10. DISP 5-10 ). - , , ( ).
:
2461-103 ( SC7461 103, ). 4 8 (4- 8-. ), 32 . . , 5- ( 20+21, 20+22, 20+23). , , .. 20 .
, (, ) ( 4 , , LC863332A - 5Z51: 5Z51), , .
:
31 pin LC863320 BUS OPEN ( - SAFTY) ( 10 5 - ) , .
, :
, 10- (12-) ; - ( ) - ( 000170) - ASCII. , , , ASCII . - I (AKIRA) 0176h.
:
LC863328A - 5W63 LC863328 - 525 ( 10 ..) (543 5Z51, Jinlipy 3728(30)).
LC863324A-52C9 LC863324A-5S68 ( http://rc5.ru/tv/msg496842646.html ).
: http://monitor.net.ru/forum/viewtopic.php?t=74997
52C9 - 5N17, 5N94, 5S68 - . 5S68 - , . !
, - 863328 (332) 863532 ( , ), + (, , .. , .. ).
.
e-mail:
Erisson 2120. LC863320A-5N94 LC863320A-5R76.
, . . SC7461-103 ( Erisson 14GX37A). Q001-Q003. R002, R004, R006 22 . ( 1551) 1, 2 41, 42 IC001 ( 4, 8 ); 1, 2, 3 Q003, Q002, Q001. R630 Q610, n-p-n R630, , Q610 22 5 . : R08 R06, . R09 3 ( R08,R09). SW3, SW5 3,9 (R06). SW1,SW4 15 (R03). R04 13,8 (R05+R04). :
http://monitor.net.ru/forum/download.php?id=8035
, .. 20 30 .. ( , ( )).
"" LC863xxx , - "" , . "0". 5 "" ( , ). ( - ) - ( ). 9,5 ( ). 7805 ( N553). (5 ) . EEPROM ("" - , ), . : http://rc5.ru/tv/msg496842646.html
, ( ), LC863xxx - IDENT - - .
( , ) pin33 LC863(324A) 22 100 RC5 ( ).
"", .. 5 6 2408 ( SDA SCL), - . 2SB892, , .
, .
, , "" . 3DD2498 (V513) ( 3,9 5, (100,0 400), , , . , .
2SA1015 (V511), () . 1013, 2S892 ( , , , ). , : 3,9 5, V511 ( 2S892), V512 (2SC3807) V513 (3DD2498 BU1508AX, 45 50 ) (LT) 817, .. "" "" 1,5 .., () .
( ).
( 14) 63 65 , 105 110 . + 220 60-75 .
( ) .
(, ) . - , , . (.. ) 0,22 !
"" , .. , . , , , , .
V511 A1015
V512 2SC3807 (DA3807, 2SC3205)
V513 3DD2498 (3DD4809, C4460, D1710C, D5287, ST1802FX)
V551 2SB892, B772
V552 C1815
V553 C1815
V554 2SB892, B764, B772
V580 A1015
V581 C1815
V702 A1015
V703 C1815
V704 C1815
V705 C1815
N553 78L05, 7805
BCK 40/2002C
D2499, D1651C (BU1508AX + - 2 FR 207).
BSC23-01N40G1 BSC24-01N4014K (48082107052)
(http://www.yingfa.com) - 5 (), 14 .
Jinlipy 3728 ( LC863328A - 5W63). 20-25 ( 2-3 ) . , . () ( 2383), 961. . , . BSC25-N3604SA (BSC24-6828) ( Screen, Focus 174-375F) : 154-177 (B,J); 154-194 (A,B,C,D,F); 174-375 (H,F); 154-479A; HR7484; HR7485; HR7906; PET22-23. 0 RECALL . .
- . . 2- . 14 1,5 ( ). . - !
- . , . .
SAYONA 14 (LC863532-54D5). OSD. LA78040 LA7840 ( ). . 05D5A 543.
Samsung ( ) : LC863322B (53W3 4F05) + LA76810A + LA7642 (Seam) + AN(CS)5265 ( ) + 2408.
- , ( Secam) - , ( "" - ). Secam LA7642N, Pal - . : - Secam , ( ) - . - (FF) () Secam, Pal - Secam - , , , . - , ( -, - ADJUST MENU) , - - , ( MUTE) !!! - , : LC863322B (5Z51 3KDB)+LA76818A+LA7642 (Seam)+AN5265 ( ) - .
, - 1 - . 9 : ( ), , ! ( ) - - . . , (FF) , . , - , ( ) , .. 1:1, ( LA76810A), "-" , .
5 - 10 Secam , PAL - . LA7642 (Seam).
( ) ( http://rc5.ru/tv/msg285720973.html ): ERISSON 2106 (3Y11) C243 30 LA76810A
(RC5) MONITOR, , .
PS: , () ..
!
--------------------------------------------------------------------------------
PAXX0081
LC863548B(36pin)+24C16, / SC7461-103, LA76810A+LA7642N, LA7910, LA78040, CD2611, FBT: BSC24-09G.
c - , , DISP(. ) .
--------------------------------------------------------------------------------
SKYWORTH, , -
:
3Y01 - SANYO
5S30 - SGS
5T51 - TOSHIBA
5P30 - PHILIPS
5I30 - ITT
....
--------------------------------------------------------------------------------
LC863532C 55P9 hina TV Sharp 15'' ( 55P2 - , 5Y29-S1, 528)
1015 + 2655 + BU2520AF
C5149
TIANHUA ELECTRONICS CO. LTD BSC 25-09N20E
LC863532C - 559 - hina TV Sharp 14R2 ( 558 - 543)
1015 + 2655 + 5287
- D1651
BSC 25-Z1003A (www.rixin.cc)
LC863332 - 55M2 - TFT NT 5'' ( 543 528 - ).
LC863532B - 54D5 - China TV JVC 14'' ( 05D5A - SYZ 54B3).
LC863532 - 55R9 - China TV Jinlipy 3728 - 14'' ( SYZ - 05D5A 54B3). HOT - TT2190 (VD + R = 47 ).
, 55P2 ( 528) - MAC MAXI - 1379.
--------------------------------------------------------------------------------
LC863332A-5Z51 - ERC 21SP50 (CE2181) ( FUNAI S2100PF, S2500PF) - : RSU21SP50.
() - http://rc5.ru/tv/msg850210053.html :
: , (RECALL (DYSPLAY)), (V-) . 'FACTORY'. 'C/B ADJUST' 'ADJUST' 'SETUP' 'NORMAL TV'.
- CALL .
--------------------------------------------------------------------------------
:
54B3 = 5Z51 = 05D5A = SYZ = HX55K8 = 53W3 = 57L8 (Panasonic) = 50JI (Sharp)
52H8 = 55P2 = 5Y29-S1 = XU-5251C-N (Panasonic) = ( MAC MAXI - 1379)
--------------------------------------------------------------------------------
China TV ORSON CT-2150S ( 3Y01) - LC863332B-53W3, - 53W3 ( 543), / - LA76810A, - D1887 , - D2624. BU1508AX ( 50 - 55 - 21) - - 47 .
, Jinlipu 3728(30) - . - . - (Jinlipu), 14 , / (14 - 15 ) / (, ORSON CT-2150S). FOCUS - SCREEN, - ( , , - ); - .
(1000 2) SCREEN , SCREEN . - , . : SCREEN , , . , - - 1 50, 1,5 ABL . - 10 . 13 (ABL) / LA76810. .
PAL
PAL , , SECAM . 4,43 38 (X TAL) LA76810A. , ( - ), . HCJ-0pF, . ( ) . , 16 , SUNNY 16. , , , PAL 4,43 (8,86) , , , http://monitor.net.ru/forum/viewtopic.php?t=8212 TDA 8362(A).
http://monitor.net.ru/forum/viewtopic.php?t=74997
52C9 - 5N17, 5N94, 5S68 - . 5S68 - , . !
1. MENU 8633.
2. MENU 8600
--------------------------------------------------------------------------------
Sanyo CE 14SA4R (, 2005): - LC863448-556, / - LA76818A + LA7642N; - LA4266; - LA78040; - 2138; - JXMYA ( - - 055155 (5031) - 20- ).
: MENU ( ) VOL+ . TIMER MUTE , - VOL- VOL+. 00 93 - , 300 .. - ?.
- . - 87 (87 AV123) 0 1, MENU . - .
--------------------------------------------------------------------------------
SANYO: CE21KF8R, . : FC-3B (FC3B - , ). : C5GS - . : AC5-G, FC-3G2 monitor' RC5, . (FC-3B), . SANYO , . :
... , .. , - Q513, FC-3B Q613 .. .
, .. . , - -...
- HOT, ( ). - '' '' HOT. c (FC-3B), , - .
, , , . , , , - .
LC863440W-52F2 (smd, 36pin) + 24C08A, LA76818J + LA7642N, LA78040N, AN5274, : ENV56DA6G3, : C2429 + C3807 + A1015, HOT: D2634, FBT: L40B10301.
, : MENU VOL+ .
--------------------------------------------------------------------------------
:
LC863xxx, , SANYO, -. , ...
, . , . - .
- R525, . , C516 - , , . .
, Q513, . - :
1. , KRAB...
2. R524. , , 22R...33R. 56R...68R ...
, , . , , - .
R525 R524, :
- - - - -- - - - - - . - .
30 LA76810, - 10 R-Y B-Y LA76810 = . LA76810 - .
- - 30 C216 104 -.
--------------------------------------------------------------------------------
. ( 110--89-118). 99 - 91. 175 (BSC24-01N4006E1). - R517-1k 100 360.
:
1. ( ) 4-5 ( 14). - (SCREEN) +200 .
2. - , , . - ( 15 ) - - (2190).
--------------------------------------------------------------------------------
.
SHARP 14R2MK2 : CPU LC863332B_53W3_4ED5 , 24C08 , VIDEO LA76810A , SECAM LA7642
.\ 24 . ZD1110.
:
1: 2-16 FACTORY
2: 2-16 B\W BALANCE
S.BRI 92
CH+ /- VOL+/-
C.B/W 0
B.DRV 62
G.DRV 8
R.DRV 55
B.BIA 159
G.BIA 211
R.BIA 117
3: 2-16 ADJUST MENU 0
H.PHASE 8
V.SIZE 65
V.LINE 27
V.POS 19
V.SC 13
NT.H.PH +01
NT.V.SIZ +03
NT.V.LINE 00
NT.V.POS +09
NT.V.SC 00
4: 3-15 ADJUST MENU 1
H.BLK.LEFT 7
H.BLK.RIGT 3
RF.AGC 15
VOL.OUT 125
OSD.CONT 60
OSD.H.POS 0
OSD V.POS 24
DIGITAL OSD ON
5: 3-15 ADJUST MENU 2
IC SELEKT LA76810
POWER OPTION ON
POWER LOGO ON
SCREEN OPT. ALL
SCREEN TIME 1
SEARCH CHEK OFF
SEARCH SPEED LOW
BAND OPTION TUNER
AV OPTION 2
V.MUTE P.OFF ON
6: 3-15 ADJUST MENU 3
BACK COLOR BLUE
BLK PROCESS ON
LINE MODE ON
CALENDAR ON
GAME OPTION ALL
ENGLISH OSD ON
RUSSIAN OSD ON
7: 3-15 ADJUST MENU 4
STEREO OPT ON
STEREO IC OFF
WOOF/H.PHONE WOOF
SIF M/N ON
SIF B/G ON
SIF I OFF
SIF D/K ON
SENSISTIVITY OFF
ZOOM OPT ON
BACK BAR OFF
8: 3-15 ADJUST MENU 5
PAL ON
N 3.58 OFF
N 4.43 OFF
SECAM ON
COLOR AUTO ON
SUB.CONT 31
SUB COLOR 30
SUB SHARP 20
SUB TNT 32
BLK.STR.DEFF ON
9: 3-15 ADJUST MENU 6
H.FREQUENCE 32
AFC.GAIN AUTO
V.SETUP 1
AV IF STATUS OFF
VIDEO LEVEL 7
FM. LEVEL 16
CD MODE 0
SOUND TRAP 4
B.GAM.SEL 2
RG.GAM.DEF ON
10: 3-15 ADJUST MENU 7
GRAY MODE OFF
VOL.FILTER ON
VIF.SYS.SW 38.9
BRT.ABL DEF OFF
MID.STP.DEF 0
EMG.ABL.DEF OFF
BRT.ABL.TH 0
LOW AC IN 245
HIGE AC IN 16
11: 3-15 ADJUST MENU 8
R-Y/B-Y G.BL 8
R-Y/B-Y ANG 8
SECAM B-Y DC 8
SECAM R-Y DC 8
12: 3-15 ADJUST MENU 9
ZOOM1 V.SIZE 64
ZOOM2 V.SIZE 67
13: 2-16
.
--------------------------------------------------------------------------------
,
, 3- , . 14 IRICO. , - - .
/ CHUNGHWA , (R 7 , R 1,8 ), ( ) .
5 ( 1,5 ). , , ( ) - , - - .
: http://monitor.net.ru/forum/viewtopic.php?t=38388
- 9 !!! - - - ( 135 +) - - (817 + 1015 892) - + - 110 , .
- !
+:
http://monitor.net.ru/forum/viewtopic.php?t=118540
RC6-5 HORIZONT 6- ( , SAA3010T ( RC-5)) LG ( ), 12.4(.5,.6,.8), , CTV811 CTV832, 10.., POLAR, ROLSEN TDA93xx
TV SERVICE LG: , , 9 SAA3010T 11 . SERVICE 1 11 SAA3010T. , XSYS MUTE ( 11- SAA3010), MUTE, ( , ). , 22 25. SERVICE , , , AV.
CTV832 . : SHIFT SVC. SHIFT VCR, . , 11- , 9- . SVC , . + ( ), ( ), 55 . - 1 SAA3010, 15. . SHIFT SVC. TV.
TV HORIZONT 676 SDA55xx - SVC ( SHIFT)
12.4, 12.6, 12.8 . - 11 24 SAA3010, -/--( ). . .
RC7-2 + - .
--------------------------------------------------------------------------------
BEKO Chassis E9 (SDA5255-052 + TDA884x)
: TV, 5. "TV", "i", "STOP". ( ).
Mak Maxi 2002 :
Code=1273.
"TV" = Rec/Erase
"i" = ''. ''P + / P '' ''VOLUME < / > ''.
.
''POWER''.
--------------------------------------------------------------------------------
ERISSON .LC863328A LA76810
1) RECALL
2)VOLUME RECALL
3) VOLUME RECALL
4) VOLUME RECALL
--------------------------------------------------------------------------------
TV HYUNDAI HU-D25A S3P8849XZZ-A089 5N11.
VOL+ VOL-- .
" MENU".
--------------------------------------------------------------------------------
SUPRA ST 21B55F
H-704V-05
SDA555XFL-A14
NN5198K -MSP3460G
- DISP.-MUTE-SLEEP-FUZZY-DISP.
--------------------------------------------------------------------------------
SUPER, MIYOTA, OPERA, WARON
TFT TV 5 - 7' ALL MODELS
LA76810A, TB1238 : LC863320A, LC863324A, LC863328A, LC863332B.
: . , . - (PROD). CH+, CH-, VOL-, VOL+. .\
--------------------------------------------------------------------------------
SHIVAKI STV-2023 DY-300-02, DAE YOUNG 9606-01, STV2118A, RC5. LG ( 1-11). 1-5 - , , , , , . 6- , 7- , , 8-, 9- STV RA (?), 0-AGC CON. (?). .
--------------------------------------------------------------------------------
Changhong 14B27MA TMP87CM38N 1238BN
1. , "0".()
2. "MUTE"
3. "MUTE", "MENU" .
4. "D", .
5. "CAL
. .
CH08TO934.
--------------------------------------------------------------------------------
AKIRA-CT-14HP9R . CH04T1221-50L9
Akira .
CN-12. :
1) Decrease volume to 0.
2) Press the MUTE button on the remote control and VIDEO button on the TV at the same time.
.e2p
--------------------------------------------------------------------------------
ERRISON 2102, 2103 : S3P8849XZZ-AQB9 S3C8849X15-AQB7
2 4 CN601. (ADJUST GND)
"KWTVA COMPUTER 11-23"
"OK" .
"KWTVA SERVICE 11-23"
OPTION 5473176706
--------------------------------------------------------------------------------
TDA 9370PS/N1/AI (DTA1489 E246)
:
MUTE, CALL, -/--, CALL, MUTE.
1,2,3,4,5.....
- EXIT.
OP4
bit 2=1 - "I"
bit 1=1 - "BG"
bit 0=1 - "DK"
--------------------------------------------------------------------------------
1) UOC (9381)
a)
b) ,,,
2) 8821
a) TV = 0
b)
3) TB1251
a) () l2 ( 2)
b) () 5l ( 5 )
c) MENU, LIMIT LIMIT
d)
e) 1251 . TV .
:
21LAS;FGS;FDS;FGP:
VOLUME "-" "DISPLAY" .
- 21FDSBn , EASTKIT 87CK38N-2B46 :
Vol(-) Picture-.
DESIGN FOR ST92195 AND SET OPTIONS
OPERATING:
Use MENU+AV+ANAL key to enter factory mode, OK key to enter Service 2.0 mode and Design
mode. Use PP key to exit Factory mode. Use PROG+/- keys to select adjust item, use VOL+/- keys to
set data. , .
--------------------------------------------------------------------------------
CYB. 8821
:
1. , "O" ().
2. "Vol " TV, "DISP" .
3. "S", .
+ , - Vol+ Vol, TV, .
- "Stand-by" .
EEPROM
No
1 RCUT 20 2 GCUT 23 3 BCUT 58 4 GDRV 40 5 BDRV 40 6 COLC 40 (NTSC) 7 TNTC 40 8 COLP 00 (PAL) 9 COLS 40 (SECAM) 10 SCNT 0 11 HPOS 07 (50Hz) 12 VP50 07 C (50Hz) 13 HIT 07 (50Hz) 14 VLIN 0C 15 SBY 08 SECAM, B-Y 16 SRY 08 SECAM, R-Y 17 RAGC 18
--------------------------------------------------------------------------------
-NN5198K(Panasonic) , - S3C8849X15-AC87
Volume "+" " -"
5 . " KWUAA SERVICE"
Channel +
"" izhod
--------------------------------------------------------------------------------
Sitronics STV2102F.
. LC863532C.
. LA76810A.
- -8633 888 1,2,3,4 .
--------------------------------------------------------------------------------
11. : Press DISPLAY and VSM key simultaneously from the remote control to go into service mode
M37221M4-322SP
--------------------------------------------------------------------------------
.SDA555XFL A14
8842
: 062596 MENU.
: , sleep ( / IC1 1 15
--------------------------------------------------------------------------------
Ranser
(For sub-color adjustments and sub-I shine) To press RESET, soon to place in the remote control, two diodes (1N4148) between pins 6 and 10 of the IC, united by its cathodes. From the union of the cathodes, to connect momentarily to pin 11. Repeating this one changes of adjustment. With VOL +/- the corresponding level adjusts. In order to leave, to hope that the
indication (OSD) in screen disappears.
--------------------------------------------------------------------------------
Protech
To retire the superior cover of the C/R, leaving the keyboard on the plate, exists several keys that do not have external access, with them is acceded to the different menus from
adjustments. With the keys CHANNEL +/- they select the item, with VOL +/- the value adjusts.
--------------------------------------------------------------------------------
Panavox
14HAC /20HAC/29BDC/29BDP
With the TV extinguished, to press in the remote control, the following sequence: DISPLAY, MENU, 3, 8, POWER, the equipment will ignite in the way service. To enter the option
"Adjustment". In order to leave and to keep changes to extinguish the equipment. Recommendation: Not to alter the values that appear in "OPTION". To open the remote control, clearing the superior cover. To use the keys that do not have external access. Two
menus of adjustments "Factory 1" and "Factory 2" activat
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Noblex and others
14TC612/20TC613/G/21TC621G/H-501N/H-612M
To disarm the remote control, to retire the superior plastic cover, they are left the rubber bellboys on the printed circuit, in completes row exist three bellboys, (or four in some models) who are not available with the plastic cover, with that is managed to enter the different ways on watch (one of the keys activates function HEAT-RUN)
--------------------------------------------------------------------------------
On this chassis is let out a significant quantity of models of television sets under trade marks AKIRA, ERISSION, SATURN,
Opera, Jinlipy, Avest, SONY, PANASONIC, Sharp, Samsung, naturally, CHINA, and all possible TFT TV (5-7").
PROBABILITY of the direct replacement of the processors of this series without agreement LC863xxx -!!!! (last marking of "!!!!") it
is equal to "0".
- investigating THE ARCHIVES of the conferences TELE-MASTER, MONITOR I met communications, as the cannot better
reflecting problems, which encounter the repairmen with an attempt at the replacement of data of processors.
- I will give these quotations with the minimum correcting:
1. "... processor LC863320A, defect - are not included from OTHERS. Is defective EEPROM 24C04. during the replacement by
the clean, television set was included also the headpiece of the following content appeared on the screen: boy with the fish on the
hands (or it is derived the logotype of producer from 12 symbols)... " - itself personally precisely with these processors did not
work; therefore "boy with the fish" 4 did not see to this day.
2. "... with diagnostics it was explained that the entrance of processor LC863324" sits down "the signal, which is necessary from
the photoreceiver. After replacing processor, it was explained that TV with it does not work. With the old processor, after pushing
of net knob, the processor to vapor of seconds thought, and development only then was included. With the the new protsessorem
vice versa. With the pushing of net knob, immediately are included the developments, and they are turned off through the pair of
seconds. On tire I2C are visible the pulses, and piercing in PZU considerably changes after the start. But which is interesting -
developments do not work, like as television set into dezh regime. But processor reacts to the pushing of knobs on the panel OF
TV. At the moments of pushing of knobs, is visible the exchange on tire I2C. Unsoldered foot "ST BY" processor, and they began
to work constantly through the resistor of podal on this path of +shchv. of development, and it occurs, processor also works. Is
simply in it inverted level on the foot "ST BY". Like small misfortune, it is possible to place inverter. But the largest problem in the
fact that with the start, the processor strongly changes piercing in PZU. As if it does not see that the microcircuit is already
pierced, and it writes in it his initial installations. In this case the language is established Chinese, the size of raster is too great,
menu only by white letters, but it is read. Buttons on the panel OF TV are entangled, and are fulfilled not those functions, that they
must be To koye as it found the line of menu, in which it is possible to select English was included the autotuning. Television set
disposed all channels, and memorized they. But image is only black - white, is apparently opened SECAM - FRENCH COLOR
TELEVISION SYSTEM. It does not react to the panel DU (although the pulses on the foot of processor come), and into the
service not to select. With turning off and start, the tuning to the channels remain. And here is problem that what - whatever 4
piercing poured in PZU, whereas with the first start the processor nevertheless it changes on its. The Chinese Language again is
established, there are no SEKAMA, and buttons are entangled. It tried to change capacitor in shaper RESET, it placed to different
capacity, it does not help. That THIS: they did send defective processor, or to it was necessary what that special piercing? Yes,
whatever piercing of 4 poured in PZU, processor with its first whereas start rerecords. All initial cells from 00 to 3F... "- and here
with this behavior of processors 328, 332 and the like I also encountered with the first - to an attempt at the replacement.
For facilitating the search is given below the table of the applicability of the processors of this series in TV.
Lc863232b-57k7 (LA76810A) - TFT TV "SATURN"
LC86331 - KONKA K3731H1
LC863320A (EPROM 24C04) - NASH CTV -.Nyya9shch
LC863320A - 5N17 - AKIRA Ct-14hs9
LS863320 - 5N94 (EPROM 24C04) - AKIRA Ct-21pf9
LC863320A - 5R76 - FUNAI MK11, ERISSON 14GX37A
LC86332 - 50Z0 - 2H00 (EPROM - 24C04) - TFT TV Super 700
LC86332 - 52C9 - AKIRA Ct-14nx9r, AKIRA Ct-21n29r, Erisson 2520
LC86332 - 5T51 - AKIRA Ct-1x9r
LC86332 - 5T51 - AKIRA Ct-14jp9r
LC86332 - 5S68 - Erisson 2120
LC86332 - SATURN ST21NF2
LC86332 - AKIRA ST -21X.G9S
LC86332 - 5Z26 - TFT SUPER Sp-750a, TFT MIYOTA My-6000r, General 21M40
LC86332 - 5Y23 - "Sony" Kv-sf14m90 (China)
LC86332 - 5Y29 - TFT MIYOTA My-750a, TFT TV MIYOTA My-6000r
LC86332 - 5W63 - TV Orion 2157/67/97, ERISSON 2107 (8), AVEST 54TQ01- 54TQ01- (on the pay of panel inscription Wx-
5w63, the microcircuit: SICORE Cx7461-103 - 4347T)
LC863328B - Opera Op-1404tc
LC863328B - 55 - Jinlipy 3728 (3730), Orion T2103FL
LC86333 - SHIVAKI Stv-2038 M4
LC86333 - 5S10 - DAEWOO Dct-21s4g
LC86333 - 5Z51 - ERC 21SP50 (CE2181) (analog FUNAI S2100PF, S2500PF)
LC863332B - shch2S' - TFT TV SUPERTECHNIKS TV-6600- st, TFT TV AMSTRAD T7, Super Sp-700 (TFT - 5,5") - (on the pay
of panel two inscriptions: Ht-001 and Yx7253-1)
LC863332B - 52Z6 - "Panasonic" (China), MATERIN B1414
LC863332B - 53W3 (EPROM 2yaS08) - 4F05 - SAMSUNG 14 (China)
LC863332B - 5Z51 - 3KDB (EPROM 2yaS08) - SAMSUNG 14 (China) - panel 5Z51 (or shchyaVe)
LC863440N, LA7681, LA78040N, tuner ENV59DA6G3 - SANYO CE21AFB
LC863448W, 24c16, LA7681, LA7642 - SANYO CE21G4 CHASSIS AC5G
LC86353 - 5Z00 - microcircuit in panel Sc7461-103
LC863532B - 53L1 - 4WR1 (EEPROM A81D (24C08)) - China TV: Sharp, Samsung, SONY and the like (panel of shch2N8)
LC863532B - 53L3 - 4RR2 (EEPROM A81D (24C08)) - China TV: Sharp, Samsung, SONY and the like (panel of shch2N8)
Lc863532v-.54d5 - SAYONA 14"(PDU - 05D - approaches also the panel of shchyaVe).
Distribution of storage cells:
LC863320A - FUNAI MK11
000011h - position along horizontal;
000012h - size on the vertical line;
000013h - linearity on vertikali(verkh);
000014h - linearity on vertikali(niz);
000015h - linearity on the vertikali(verx- bottom is symmetrical);
000016h - linearity on vertikali(tsentr).
Options of the systems of color somewhere between 000000h-000008h
LC863328B (LC86332) - with addresses 11h and 13h must be "00" - otherwise - blocking image, lock.
Existing VERSIONS OF THE ENTRANCE Into THE SERVICE:
1. The entrance into service TFT TV SUPER, MIYOTA, OPERA, WARON and others on TSPU LC863320A, LC86332,
LC86332, LC863332B - on the panel are several concealed buttons. That them to reach, it is necessary to unglue upper film.
For the entrance - output from the service menu is used the button signed as (PROD). Control CH+, CH -, VOL -, VOL+. Menu
has three I will substitute with the extensive tuning.
2. 1. Volume to minimum 2. To harvest Volume - on TV and Recall on DU 3. Timer, Timer, Mute - selection of the menu
Refinement: Using a panel for remote control, to harvest (RECALL (DYSPLAY)), then to harvest (V -) and to retain certain its time.
On the screen will appear the inscription "FACTORY '. The repetition of this operation several times will lead to the output to
screen ' C/B ADJUST ' "ADJUST '" SETUP ' and will return k ' NORMAL TV '.
3. to harvest on RC: SKIP. --.V. AFT.(ili -/-) * PIC output.
4. from the panel to collect: (MENU) (MENU) (V.WIEV) (MUTE)(.SLEEP) - to turn over pages. CPU TV SET Will Go To Factory
Mode..Press "TIMER" key to go to the nextfactory menu.
5. to lock 2 and 13 (14) legs IS in PDU (microcircuit it can be flooded by compound).
6. IMS in the compound on PDU. Entrance into the service - 2 and 15 legs IS or to lock the upper half of contacts under button 5
and lower half under the button (it is drawn dynamic loudspeaker). Will appear inscription "LA76810 option menu 00". In this
position passage on the pages of menu by button "loudness +". only of 4 pages. There is another record for the microcircuit in
compound, which find directly on the pay of panel. Feet in it disperse as in spider, to the left and to the right. Higher than it there
are small five-kopeck coins of contacts. It found the pair, which must be locked for the entrance into the service by the trial-anderror
method. Where they are located by words not to describe, I can only say that one pyatachek is located to the leftist OF IMS,
by another more to the right.
7. concealed button, locks 16 and 2 conclusions IMS PDU (in me this realized in the panel of shch2N8 for LC863532. to begin
counting from the left top cap. Thickened paths - to count as 2 conclusions, i.e., to lock the second according to the calculation on
top to the left and the fourth according to the calculation from below to the right). With the pressure on the screen are derived
FACTORY, the following pressure - menu of the adjustment of balance, the following pressure - the following pressure - the menu
of the adjustment of geometry ADJUST MENU 0. In regime ADJUST MENU 0 closing 2 and 17 feet (also concealed button, in the
normal mode it ZOOM) derive on screen ADJUST MENU 1, option SETUP SELECT to transfer into regime ON. Each following
pushing of knob ZOOM (2-17) sorts out service menu from 9 through 0. Selection of options R+, R -, change V+, V -. output -
button 2-16.
8. LC863320A - FUNAI MK11. for the entrance into the service in native PDU to solder the button between 2 and 16 feet of m/skh
RT 2461-103. We press button for the 1st time - on the screen: FACTORY. Pressure. 2-1 times - to ekrane:.B/Sh ADJUST (reg.
regimes of kinescope). for the 3rd time - ADJUST(geometri4). for the 4th time - SETUP (installation of options). the 5th pressure -
output from the service. Buttons R -; R+; V -; V+ help to establish necessary values in the necessary places)
9. if this does not help - universal panels.
10. removal of lock in THESE chassis - to harvest and to retain on PDU button DISP in the flow 5-10 s). If there are no PDU - to
put clean IMS of memory, TV will be neglected, to remove and to rewrite from it the first line in the old piercing (into taken IMS).
Additional information on IMS PDU:
RT 2461-103 (apparently its straight analog SC7461 - 103, only different producer). It has matrix 4 to 8 (4- entrance the 8- strobe
of outputs), only of 32 combinations. It is possible to look those not used. Another microcircuit allows three commands with the
dual pressure of keys, on the 5- output (in the matrix this of 20+21, 20+22, 20+23). If the desired code is located on the current
page, then search will not engage much time, since combinations 20 it is already used.
And also, recently (that which was encountered to me) - MARKING panels from above the housing frequently corresponds to
marking processor (last 4 signs, for example, LC86333 - 5Z51: panel 5Z51), which already indirectly attests to the fact that this
type of panel will work with this processor.
Interesting INFORMATION:
31 pin LC863320 - BUS OPEN (according to my diagrams - SAFTY) on the screen with the closing to the mass (it "it is pulled"
through by y0kOm to 5 volts it goes to the service joint - the second conclusion from the mass) are lost any control OF TV -
IMKHO, unused entrance for the realization of different PROTECTION.
On a change in the inscription, which is placed on the screen OF TV:
Inscription easily changes by any other, in the limit to 10- and (12- and) the symbols; only roman alphabet or hieroglyphs with the
figures - the usual programmer (I I work with THE PONY) - headpiece is visible in the lateral field explicitly (in line 000170) - this is
code ASCII. Headpiece is written in the ground field, with the same addresses, the letters are collected in the hexadecimal code,
ASCII only shows literal value with these addresses. With the writing it is necessary to soblyudat' the centering of word on the
screen - the middle of any word must correspond to letter I (AKIRA) with address 0176h.
Direct the replacements checked:
LC86332 - 5W63 on LC863328V - shchshch (price of approximately to 10 u.e.) with the retention of native panel (shchyaVe
or 5Z51 or panel from Jinlipy 3728(30)).
Lc86332-52c9 - changes without the alterations to Lc86332-5s68 (information it is undertaken from http://rc5.ru/tv/
msg496842646.html ).
Information from the theme: http://monitor.net.ru/forum/viewtopic.php?.t=74997
52C9 changes one into one - 5N17, 5N94, 5S68 - they everything without the Russian language. 5S68 has timer for the start and
disconnection and also hours, in other respects analogous. Information was not personally by me checked!
It worked with the chassis, on which there are two forms of landing places - hearth 863328 (332) and 863532 (housing of the
same, but two times already), is established by any of them + commutation by cross connections on PP (as, it did not try, since in
essence processors to the replacement took analogous with PP TV with the marriage of kinescope, TDKSa and so forth
unrestorable for ECONOMIC reasons PREDTORG).
Until today THERE IS NO OTHER information on THE STRAIGHT interchangeability.
Here is INFORMATION from Ramil' e-mail:
Erisson 2120. Replacement of processor Lc863320a-5n94 on Lc863320a-5r76.
It is necessary to consider that the replacement of panel is necessary during this replacement. Panel with per cent. Sc7461-103 (it
approaches from Erisson 14GX37A). To remove transistors Q001-q003. to replace resistors R002, R004, R006 by 22 k. To
establish the decoder (I were used BY KYSHCHSHCHIDY) by entrances 1, 2 to legs 41, 42 ic001 (entrance 4, 8 to the housing);
output 1, 2, 3 into the openings of the collectors of transistors Q003, Q002, Q001. to tear the path between R630 and by base
Q610, and to install transistor n-p-n base on R630, emitter into the housing, the collector to base Q610 and through the resistor
22 k to 5 V. dorabotat' the pay of control for the correspondence of the buttons: To disjoin resistors R08 and R06, and to place
instead of them cross connections. Instead of R09 to place 3 k (consecutively R08.r09). Between buttons SW3, SW5 to place 3,9
k (R06). Between SW1.sshya - 15 k (R03). Instead of R04 - 13,8 k (R05+.R04). Piercing here:
http://monitor.net.ru/forum/download.php?.id=8035
PERSONAL OPINION about attempts AT "CHEMISTRY" during the replacement of processors - I consider ECONOMICALLY
inadvisable, since the price of similar chassis with the wholesale purchases 20 - 30 u.e. (to more simply replace with chassis, if
KINESCOPE even more normal (usually Chinese do not advance INCANDESCENCE and all ensuing consequences...)).
For the information - price and the presence IMS in Kharkov (1 u.e. - 5,05 grn.): http://kosmodrom.com.ua/
LA76810A - 18,89 grn.;
Lc863320a-5r76 - 23,91 grn.;
Lc86332-29 - 36,00 grn.;
Lc863328b-55 - 45,03 grn.;
Lc863328b-52g3 - 35,69 grn.
Malfunctions of the chassis
About the pleasant "vitality" of processors LC863xxx testifies the following malfunction, which was encountered - with the
selection in the menu of option "auto-search" occurs reconstruction of channels; however, they are not prescribed into the
memory. Was immediately replaced memory - result "0". Confused one more - after 5 minutes of work processor "podvisal" (it
grew dark screen, it disappeared control). The following step (which had to be to konechno-zhe the first) - checking the
nourishment of processor (and of memory). Result - 9,5 v (although overheating housings IS it was not observed). Reason -
stabilizer 7805 (position N553). After its replacement the stress arrived into the standard (5 v and appeared the writing of
channels into the memory. EEPROM it was necessary to leave the new ("native" it did not nevertheless maintain the almost
double exceeding of nourishment - it were read, but it did not prescribe new data), but here processor - IT DID NOT SUFFER.
Additional confirmation of "vitality" of the processors: http://rc5.ru/tv/msg496842646.html
There were several cases, when there is no writing of the channels into the memory with the auto-search (or the frequency drift of
the disposed channels), reason for which was failure LC863xxx - it was hit according to conclusion IDENT - by the tester of the
sag of resistance it did not show - it was explained podkidkoy worker.
"proskakivniye" of channels with the auto-search (with the manual channel checkup to derzhit'sya, it does not depart) - an
increase in the resistor to pin33 LC863(.32) with 22 kilohms to 100 k - is undertaken to RC5 (personally THIS it was not
encountered).
The interesting malfunction of predtorga - apparatus did not leave from OTHERS - were locked on the upper side PP resistors
"suspenders", i.e., closing 5 and 6 legs of 2yaS08 (tire SDA and SCL), although it is visual reason not evidently because of the
density of installation on PP. Frequently the analogous manifestation of malfunction is caused by the breakdown of transistor
2SB892, which is the key of the second supply voltages, removed with IBP.
The absence of output from OTHERS was encountered also repeatedly with the loss of vacuum in the kinescope, there was the
case - with the breakdown on PP between the paths and the installation wires of outputs to JUICE and SPINNER.
The most frequent malfunction, which was encountered to me in the predtorgovykh and guarantee apparatuses on these chassis,
is the "carrying" of power unit. Characteristic feature - breakdown of key transistor IBP 3DD2498 (V513) and (burnout of resistor
3,9 Ohm X of shchVt, which limits current surges with the start IBP and the charge of net chemical capacitor (100,0 X of ya00V),
safety device in this case remains, as a rule, proper. Recently this resistor is substituted with the posistor, which fulfills analogous
function.
The reason for this malfunction - loss of properties by transistor 2SA1015 (V511), which costs in the chain OS (opto-pair) and
strongly peregrevayetsya in OTHERS. Many substitute it by Ay0ye, whereas 4 it I change to 2SV892 (it is more reliable, especially
because adapts in these chassis in other positions how is achieved the unification of those completing). Thus, with
malfunction 4 imperatively I recommend TO REPLACE the following complete set: 3,9 OHM X of shchVt, V511 (on 2SV892),
V512 (2SC3807) and V513 (3DD2498 - I I substitute to BU150X, in this case heating regular radiator it does not exceed 45 - 50
degrees) and optos-pair RS (LT) 817, since usually all this "scorches" with the "carrying" BY IBP - the price of those completing is
less than 1,5 u.e., but the breakdown of power key (alliteration) - you will avoid.
But if the alliteration of this malfunction is observed - you will replace in the hot part all neelektroliticheskiye capacitors (they they
break themselves).
Stress IBP in standby mode (diagonal 14") - 63 - 65 volts, RR - 105 - 110 volts. During the repair it is necessary to load +V IBP
with lamp 220 v X of 60-75 W.
Also these IBP can leave from the regime of the stabilization (they go "into the carrying") with reduction in the supply voltage.
Interesting (commonplace, but sometimes starting into the blind alley) malfunction IBP on this TV. TV is not included - there is no
starting IBP or, if nevertheless it is included, then it works then to the disconnection. To solder (since the surface of conclusions is
covered with oxide) with a good flux the outputs of the resistor of current sensor shityu 0,2m from 3 key transistors IBP!
Is given below the enumeration of elements IBP and "adjacent" with it it is main, since were encountered the cases of the break of
transistors, which hampers the elimination of malfunction. In the brackets are indicated the transistors, which ORIGINALLY were
established in different modifications of this chassis, and, correspondingly, they were interchanged.
V511 - A1015
V512 - 2SC3807 (DA3807, 2SC3205)
V513 - 3DD2498 (3DD4809, C4460, D1710C, D5287, ST1802FX)
V551 - 2SB892, B772
V552 - C1815
V553 - C1815
V554 - 2SB892, B764, B772
V580 - A1015
V581 - C1815
V702 - A1015
V703 - C1815
V704 - C1815
V705 - C1815
N553 - 78L05, 7805
TPI - BCK ya0/.2002Ch
Line scanning - D2499, D165 - also money-changers on (BU150X + in parallel to 3 2 series-connected FR 207).
TDKS - Bsc23-01n40g1 or Bsc24-01n4014k (48082107052)
(http://www.yingfa.com) - it has 5 outlets for the correction of the size of raster during the application of different kinescopes (OS),
including altered monitorovskikh 14"- within the warranty period it goes out of order VERY RARELY.
Still several malfunctions on a similar complete set IS
Television set Jinlipy 3728 (TSPU - LC86332 - 5W63). With the warming up of the minutes through 20-25 it knocks out lines
beginning from the upper part of the image (white thin strips with a step of 2-3 mm), also, up to their complete sliding down to the
bottom edge of image. With the heating by foehn for the localization of defect it left on TDKS, but its replacement gave nothing.
Proved to be everything considerably simpler (cheaper) - flowed the transistor of rocking TMS (type of 8Ea), which in view of
the absence at that moment of native was successfully substituted on KT9'YA. Defect disappeared. Simply with the localization by
foehn in the region TDKS hot airflow went in the grooves under the radiator note and was preheated this transistor, and since it
was located beyond the radiator - that it was erroneously rejected BY TDKS. For the information - native TDKS of the type Bsc25-
n3604sa (Bsc24-6828) it can be with the success (without peretrassirovki of conclusions - me it additionally was necessary to
bore only opening and to solder the conclusion of the mass of resistors Screen, Focus for y"ya-.e"shchF) it was substituted on any
of these: 154-177 (B.zh); 154-194 (A.b.ch.d.f); 174-375 (H.f); yshchya-.ya"9A; HR7484; HR7485; HR7906; Pet22-23. One of the
versions of the entrance into the service of this TV - loudness to 0 on the panel and RECALL on PDU. The second - concealed
button on PDU.
Floor the model OF TV. Predtorg with the beaten kinescope. The adjusting overall sizes of kinescope are nonstandard - round
eyelets for fastening by 2-4 samorezami. Kinescope was substituted to the kinescope from 14"monitors with the preliminary
resoldering to the series connection SPINNER and JUICE and with addition consecutively THE JUICE of choke for an increase on
1,5 cm of size along the horizontal (as the choke it was used antiresonant coil from monitor OSki). Attention - native kinescope
has the nonstandard unsoldering of socket - it was necessary to perekommutirovat' on PK under the standard base. After the final
installation of kinescope - to select resistor in the filament circuit!
Floor the model OF TV. Malfunction - strongly it twitches itself on the vertical line of menu and is outwardly the conclusion of
information in one line instead of the list of divisions, all the remaining functions - within the standard. Is defective TSPU.
Television set SAYONA 14"(Lc863532v-.54d5). There is no frame scan and OSD. Microcircuit KR la78040 was without the
modification substituted on LA7840 (under it there are additional landing places on PP - in this case they are removed two cross
connections on the pay). Indication was restored after the elimination of the microscopic crack of path on which they go SIOKH on
TSPU. For information - PDU - 05D - is suitable also the panel of shchyaVe.
TV Samsung (Chinese forgery) composition: LC863322B (53W3 4F05) + LA76810A + LA7642 (Ses.am) + AN(.CS)5265 (two
UNCH) + 2yaS08.
Defect - the image dark, unnatural (in Secam) - is very similar to that, as if there is no bright component (it resembles the break of
delay line in "ancient" TV - it is inclined to the negative). More similarly it was encountered in me earlier with the refusal of decoder
Secam LA7642N, but here with the transfer into Pal - image generally disappeared. Survey by the oscillograph: on to the shawl of
decoder Secam all signals enter, podkidka of decoder (but suddenly it) - did not help. With the installation of clean (FF) memory in
the menu (standard) disappeared Secam, but with Pal everything became OK - during the switching to this standard on Secam -
channels all OK, but, naturally, without the color. Appeared VERY LARGE suspicion to the flight of piercing, but with the entrance
into the service (in PDU drop, there are the concealed keys - threefold pressure on one of them and we in ADJUST MENU) the
divisions of menu, which correspond for any adjustments except geometry and something on the color, they were not opened
(they must be switched by the key for the disconnection of sound MUTE)!!! Not there was native working piercing, it took from this
modification of the chassis: LC863322B (5Z51 3KDB)+.LA7681+.LA7642 (Ses.am)+.AN5265 (one UNCH) - from working TV.
By this pierced piercing of new IS of the memory OF TV it were included after installation, but image began to blink with a
frequency of about 1 Hz and appeared additionally something of the type of marking for the installation of geometry. In the service
then ALL 9 DIVISIONS OF THE MENU WERE OPENED: were included the native video processor (winking with the marking it
disappeared), the options of tuner, option in a quantity it was input and to sound! Everything then decided to establish the native
memory (in standby mode without disconnecting TV from the network) and to rewrite from it the options of geometry - it came out
and even appeared the remaining divisions of menu. It copied options within all divisions and then prescribed them by hand in the
service into new IS. As it was explained, knowing options it is possible this it was to make and with the clean (FF) memory, that
also was made in second TV. Which is interesting, the defect immediately is repeated with the installation of old memory and the
disconnection OF TV net of key, which tells precisely about the apparatus (not program) damage to memory, since options were
prescribed by 1:1, but defect disappeared with an attempt at switching the type of video processor on another (not LA76810A),
but in this case "blinked" image, precisely this cell is apparently damaged.
After 5 - 10 minutes of work the image in Secam acquired the saturated green nuance, in PAL - standard. Commonplace
incompletely soldered place of contacts shawls with decoder LA7642 (Ses.am).
One additional (in my view) interesting defect (information it is undertaken from http://rc5.ru/tv/msg285720973.html ): ERISSON
2106 (11) - colored vertical posts - leakage C243 from 30 feet LA76810A
Enormous APPRECIATION to participants in the conferences TELE-MASTER (RC5) and MONITOR, I think that 4 it did not pinch
their copyrights.
PS: supplement this branch by the existing information, including (IMKHO) - by piercings under the existing version of processor.
Successes in THE REPAIRS!
Chassis PAXX0081
LC863548B(.36pin)+.24C16, m/skh of panel Sc7461-103, LA76810A+.LA7642N, LA7910, LA78040, CD2611, FBT: Bsc24-09g.
Entrance into servi.ch - on the snout to diminish loudness to zero, retaining, to harvest DISP(pr4moug. with plus) to pdu.
Small refinement:
- chassis, with which deals the discussion, most likely is developed SKYWORTH (china). For the first time it appeared precisely
under this brand, although it is certain, were possible the different versions.
In SKYWORTH, according to the idea, the second bukvav of chassis - this basis on what chip is made the chassis
For example:
3Y01 - SANYO
5S30 - SGS
5T51 - TOSHIBA
5P30 - PHILIPS
30 - ITT
and td....
LC863532C - 55P9 - S.yuina TV Sharp 15' ' (It is completed BY PDU 55P2 - They approach Panels, 5Y29-s1, shch2N8)
IBP is assembled to Ay0yshch + Of s2'shchshch + BU2520AF
NOTES - C5149
TDKS of firm TIANHUA ELECTRONICS CO LTD type BSC TO 2SHCH-.09N20E
LC863532C - shchshchK9 - S.yuina TV Sharp 14R2 (it is completed BY PDU NKHSHCHSHCHK8 - it approaches the panel of
shchyaVe)
IBP is assembled to Ay0yshch + Of s2'shchshch + Of sshch28"
NOTES - D1651S
TDKS of type BSC OF 2SHCH-.ZY00EA (www.rixin.cc)
LC863332S - 55M2 - TFT NT 5' ' (panels of shchyaVe and shch2N8 - THEY DO NOT APPROACH).
LC863532B - 54D5 - China TV JVC 14' ' (panel 05D - analogs SYZ and 54B3).
LC863532S - 55R9 - China TV Jinlipy 3728 - 14' ' (panel SYZ - analogs 05D and 54B3). HOT - TT2190 (VD + R = 47 Ohm).
For the processors, which are governed PDU of the type 55P2 (analog of the panel of shch2N8) - it is possible to use the
universal panel MAC MAXI - code 1379.
Koye that for the television sets on basis of LC86332 , and about protsessor(datashit, the collection of piercings, into differentlist
and form of the panels used, value of service), is assembled in the search from soobsheniy of participants in the conferences
monitor and RC5.
Lc86333-5z51 - ERC 21SP50 (CE2181) (analog FUNAI S2100PF, S2500PF) - the panel: RSU21SP50.
Are added by 29.12.2005 16:27
Refinements (addition) - http://rc5.ru/tv/msg850210053.html :
Entrance into the service menu: Using a panel for remote control, to harvest (RECALL (DYSPLAY)), then to harvest (V -) and to
retain certain its time. On the screen will appear the inscription "FACTORY '. The repetition of this operation several times will lead
to the output to screen ' C/B ADJUST ' "ADJUST '" SETUP ' and will return k ' NORMAL TV
Removal of lock - on the panel to harvest CALL and to retain almost minute.
Generalized information on the analogs of the panels:
54B3 = 5Z51 = 05D = SYZ = HX55K8 = 53W3
52H8 = 55P2 = 5Y29-s1 (for panel MAC MAXI - code 1379)
Additional information on IBP:
TV arrived with the pierced key IBP - Sshch28", which was substituted on BU150X (heating regular radiator was 42-43 degrees,
when as with the regular transistor usually - about 55 - 57 degrees). Furthermore there were the probits of 2 diodes in the net
bridge and safety device, but, THE REASON for entire this was the break of the capacitor of the full wave rectifier 100 X of
ya00Vol't; therefore you will turn on this attention with the entering OF TV with such symptoms.
Additional information on the cadre:
Malfunction: appearance on the raster of lines OH in the upper part (immediately or with the warming up) or raster on the vertical
line composes 2/3 from the nominal size, above on it line OH, there is no drawing - everything else within the standard. Reason -
ceramic capacitor "clay" of 10 pF X 500 into, that stands between the entrance and output LA7840 (78040) - analogs TDA8172.
You will replace it and everything comes into the standard.
TV Otava-3745
In the composition: LC 86333, LA 76810, panel to m\s Cx7461-103
China TV BY TV ORSON Ct-2150s (chassis 01) - TSPU Lc863332b-53w3, PDU - 53W3 (it approaches shchyaVe), V/P -
LA76810A, key IBP - D1887, NOTES - D2624. key IBP NOTES they are successfully substituted to BU150X (temperature of
radiators not more than 50 - 55 degrees for this diagonal - 21") - for note are additionally added resistor B -3 by rating 47 Ohm.
On the quality of kinescopes and not only...
Recently in TV Jinlipu 3728(30) one should say separately on the quality of the kinescopes, installed - their quality SHARPLY fell.
Can this connected simply with the absence recently of any control from the side of the collectors OF TV. In these TV are
established original both on the "firm" - to producer (Jinlipu) and on the base and landing fastenings 14"kinescopes, but not as
into the forgeries under known brendy to b/u monitorovskiye (14" - 15") or to b/u TV kinescopes (for example, in TV ORSON Ct-
2150s). Frequently was encountered leakage FOCUS - SCREEN, which had different manifestations - impossibility to advance
that accelerating and focus (focus control it influenced the adjustment of that accelerating, in this case image washed away and
very bright, up to the appearance THE OLEASTER also of the "ringing" of the mask of kinescope because of the high current of
rays); smooth or abrupt changes in the brightness of subject without a quality change of focusing - all this depending on the value
of leakage.
In the latter case after checking of the filtering capacitor on that accelerating (1000 pF X 2kv) and stability of stress SCREEN with
TDKS, further diagnostics without "podkidyvaniya" of deliberately working pipe was carried out by otpaivaniyem of output
SCREEN of the socket of kinescope. With the start - image on the screen OF TV with the overstated brightness, what with the
proper kinescope be there must not. Leakage was removed as follows: on the worker TV isolated from the diagram output
SCREEN of kinescope was locked several times by conductor to the mass OF TV, until am finally not "extinguished" kinescope.
After the restoration of the connections OF TV it earned normally, BUT during the girder somewhere in the hour was heard cotton
- it tore the chemical capacitor 1 X of shch0V, switch oned through the resistor 1,5 k from conclusion ABL OF TDKS to the earth.
Reason - NOT ESTABLISHED at the plant with the assembling resistor 10 k in the chain vyv. 13 (ABL) V/P LA76810A. Here such
TWO defects in BY ONE predtorgovom OF TV.
There is no color in PAL
There is no color in PAL both from ether and from the video input OF TV, in SECAM everything within the standard. Is defective
quartz resonator 4,43 MHz on 38 leg (X TAL) LA76810A. I focus attention, what "native" quartz resonator stood without the "load
capacity" (on PP - cross connection), in this case on its corpus of no data about this it was brought. For the replacement was used
the quartz with the additional marking HccJ-0pF, installed also without the "load capacity". Was at the same time produced
checking the existing quartz resonators and were selected "load capacities" (or their absence) for them. For example for one of
the resonators, the value of "load capacity" was 16 pF, and on the housing of quartz there was inscription SUNNY 16. This defect
and recommendations, are characteristic not only for these chassis, but also for all rest, in which for working PAL is used
supporting quartz 4,43 (8,86) MHz, about which more narrowly it was mentioned, for example, in http://monitor.net.ru/forum/
viewtopic.php?.t=8212 with the examination of video processor TDA of 8e'2(.A).
Information about the replacement of the processors
It is undertaken from http://monitor.net.ru/forum/viewtopic.php?.t=74997
52C9 changes one into one - 5N17, 5N94, 5S68 - they everything without the Russian language. 5S68 has timer for the start and
disconnection and also hours, in other respects analogous. Information was not personally by me checked!
Even about the entrance into the service...
1. We cause MENU and we collect 8633.
2. we cause MENU and we collect 8600
Sanyo CE 14SA4R (Kaliningrad, 2005): TSPU - LC863448S-55S6, V/P - LA7681 + LA7642N; UNCH - LA4266; KR -
LA78040; NOTES - TT2YE8; PDU - JXMYA (not with one of that mentioned above it is not compatible - IMS in PDU -
M0shchshchyshchshch (shch0eyA) - 20-nogaya planarka).
Entrance into the service: retaining "MENU" (on PDU) to harvest "VOL+" on TV. Leafing through of options by buttons "TIMER"
and "MUTE" to PDU, change in the parameters - "VOL -" and "VOL+". The options of service from 00 to 93 - are intelligible
without manuala, and then immediately occurs passage to 300 options, etc. - and in them "?".
TV arrived with the diagnosis - does not work video input. Elimination - to enter into the service and in "87" the option (87 av123)
to switch value with "0" on "1", after which for the output from the service to harvest on PDU "MENU" and to turn off BY TV net
button. After switching on - option they will enter into the force.
SANYO: CE21KF8R, Kaliningrad assembling. Chassis: Fc-3b (FC3B - inscription in the angle of pay, from the outer side). On the
pay of stiker with the inscription: C5GS - supposedly soft. Diagrams and manualy to the uniform chassis: Ac5- g, Fc-3g2 are
located on monitor'e and RC5, with the sadly known diagram BP on polevike plus of five transistors. This chassis (Fc-3b), is
characterized by precisely power unit. Is used classical diagram from SANYO on the bipolar power key plus two transistors, see
the insert:
Marking and pinovka TPI in both diagrams coincide... The position designations of elements begin from six, i.e., on the insert, for
an example - Q513, on pay Fc-3b there will be Q613, etc. it actually signed only pinovku TPI.
I describe this, since THUS FAR it did not see manuala or the diagram of this modification. Therefore, who will encounter - that it
will be more easily...
Standard defect not of the large diagonals of these chassis - breakdown HOT, with the subsequent burning out BP (on polevike).
Observed reason - ' ' capacity OH "in collector HOT. In chassis c bipolar power key (Fc-3b), observed by me, IIP - remains entire.
Apparatus starts with the clean memory, strictly dump therefore I do not lay out, and also without the memory, it is necessary
several seconds to retain the button of perekl. of channels, and, geometry, however it is strange - within the standard.
Lc863440w