Services, equipment and systems for Subsea Umbilicals ... · PDF fileServices, equipment and systems for Subsea ... cables Subsea 7: ... Subsea 7: Installation Technip Norge: Installation

November 2013WWW.INTSOK.COM

Services, equipment and systems for

Subsea | UmbilicalsRisers | Flowlines

Under-water facilities for oil and gas production are generally referred to using a subsea prefix, such as subsea well, subsea tree, subsea manifold, etc. Together with the engineering, manufacturing and installation of umbilical’s, risers, and flowlines, as well as associated services, this scope is often abbre-viated as “SURF”.

Subsea production systems can be used to develop entire reservoirs, or parts of reservoirs (flanks), early production systems, satellite developments, infill drilling, brownfield optimization etc, which require drilling of wells from more than one location. Deep water conditions can inherently dictate development of a field by means of a subsea production system.

SURF systems will play an increasing role as fields are to be developed in deeper and more remote areas – as well as when developing marginal fields – smaller deposits are to be tied back to fixed or floating hubs covering larger areas.

The above graph shows some major trends in the development of offshore oil and gas fields. Compared with fixed platform solutions, development solu-tions applying floaters and or SURF solutions will be increasingly important. There will be a doubling of the offshore oil service market from 2010 to 2016 and offshore E&P spending will reach US$ 1 trillion in 2030. Today, develop-ment solutions containing floaters and SURF (subsea) covers roughly 40% of offshore field developments – increasing to 60% in 2030 when tie-backs will drive growth in the subsea market by 4 times in the period 2012–2030.

Scale Million US$1 000 000

SubseaFloaterFixed

1991

1994

1997

2000

2003

2006

2009

2012

2015

2018

2021

2024

2027

2030

800 000

600 000

400 000

200 000

0

Reference: Rystad Energy 2011: INTSOK Market Report

SURF

Introduction ............................................................................................................................................................................................................................................................4Capability Matrix ............................................................................................................................................................................................................................................. 6Detailed capabilities by category ...............................................................................................................................................................................................8

4Subsea AS ..........................................................................................................................................................................................................................................................................................................8ABB AS ..........................................................................................................................................................................................................................................................................................................................9Agility Group ...................................................................................................................................................................................................................................................................................................10AGR Facilities Solutions AS ...................................................................................................................................................................................................................................................11Aker Solutions ............................................................................................................................................................................................................................................................................................ 12AS Connector ..................................................................................................................................................................................................................................................................................................13Bredero Shaw Norway AS .......................................................................................................................................................................................................................................................14ClampOn AS .......................................................................................................................................................................................................................................................................................................15CRE8 Systems AS ..................................................................................................................................................................................................................................................................................16DEEPOCEAN AS .........................................................................................................................................................................................................................................................................................17DNV GL .......................................................................................................................................................................................................................................................................................................................18DOF Subsea AS ...........................................................................................................................................................................................................................................................................................19EMAS AMC .........................................................................................................................................................................................................................................................................................................20FMC Technologies ................................................................................................................................................................................................................................................................................. 21FORCE Technology Norway AS .....................................................................................................................................................................................................................................22Freudenberg Oil & Gas Technologies ...............................................................................................................................................................................................................23GE Oil & Gas.................................................................................................................................................................................................................................................................................................... 24Hitec Products AS ................................................................................................................................................................................................................................................................................25IKM Subsea ........................................................................................................................................................................................................................................................................................................26IKM Testing AS ..............................................................................................................................................................................................................................................................................................27Institute for Energy Technology .................................................................................................................................................................................................................................28iSURVEY Group .........................................................................................................................................................................................................................................................................................29KONGSBERG Oil & Gas Technologies .............................................................................................................................................................................................................. 30MARINTEK .............................................................................................................................................................................................................................................................................................................31Multi Phase Meters AS (mpm) ........................................................................................................................................................................................................................................32Nexans Norway AS ............................................................................................................................................................................................................................................................................... 33NYMO ..........................................................................................................................................................................................................................................................................................................................34One Subsea ...................................................................................................................................................................................................................................................................................................... 35Parker Maritime ........................................................................................................................................................................................................................................................................................36PG Pump Solutions (Ing. Per Gjerdrum AS) ..............................................................................................................................................................................................37Presens ....................................................................................................................................................................................................................................................................................................................38REINERTSEN AS .......................................................................................................................................................................................................................................................................................39Roxar ............................................................................................................................................................................................................................................................................................................................40Sandvik Riser Technology AS ............................................................................................................................................................................................................................................41Siemens Oil & Gas Subsea Solutions .............................................................................................................................................................................................................. 42Subsea 7 .................................................................................................................................................................................................................................................................................................................43Technip in Norway................................................................................................................................................................................................................................................................................44Techno Dive AS ...........................................................................................................................................................................................................................................................................................45TESS as ...................................................................................................................................................................................................................................................................................................................46Trelleborg Offshore Norway AS ..................................................................................................................................................................................................................................47

Contents

3

Engineering & Technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine Operations, Intervention & Subsea Services

Subs

ea E

ng.

Pipe

line

Eng.

Tech

nica

l se

rvic

es

Prod

uctio

n Se

rvic

es

Tree

Sys

tem

s

Cont

rols

&

Mea

sure

men

ts

Subs

ea F

acili

ties

Subs

eaPr

oces

sing

Subs

ea

Pow

er D

ist.

Tool

ing

Um

bilic

als &

Ca

bles

Rise

rs &

Fl

owlin

es

Seab

ed S

urve

ys

& L

ight

in

terv

entio

n

Seab

ed

Inst

alla

tion

Pipe

layi

ng

Ligh

t Wel

l In

terv

entio

n

4 Subsea

ABB

Agility Group

AGR Facilities Solutions AS

Aker Solutions

AS Connector

Bredero Shaw

ClampOn

CRE8

DeepOcean

DNV GL

DOF Subsea

EMAS AMC

FMC Technologies

Force Technology

Freudenberg Oil & Gas Technologies

GE Oil & Gas

Hitec

IKM Subsea

IKM Testing AS

Institute for Energy Technology

IntroductionCapability Matrix

4

Engineering & Technical Services Subsea Production Systems

Umbilicals & Flowlines

Marine Operations, Intervention & Subsea Services

Subs

ea E

ng.

Pipe

line

Eng.

Tech

nica

l se

rvic

es

Prod

uctio

n Se

rvic

es

Tree

Sys

tem

s

Cont

rols

&

Mea

sure

men

ts

Subs

ea F

acili

ties

Subs

eaPr

oces

sing

Subs

ea

Pow

er D

ist.

Tool

ing

Um

bilic

als &

Ca

bles

Rise

rs &

Fl

owlin

es

Seab

ed S

urve

ys

& L

ight

in

terv

entio

n

Seab

ed

Inst

alla

tion

Pipe

layi

ng

Ligh

t Wel

l In

terv

entio

n

I Survey

Kongsberg Oil & Gas

MARINTEK

MPM

Nexans

Nymo

OneSubsea

Parker Maritime

PG Pump Solutions

Presens

Reinertsen

Roxar

Sandvik Riser Technology

Siemens

Subsea 7

Technip Norge

Techno Dive

Tess

Trelleborg

5

The development and operations of subsea oil and gas fields require suppliers and service providers for:

Engineering & Technical Services: Subsea and SURF technol-ogy is a highly specialized field of application with particular demands on Engineering & Technical Services; covering service elements from flow assurance simulations and studies, pipeline and subsea design to detailed installation and tie-in studies. Subsea Production Systems: These can range in complexity from a single satellite well with a single flowline tied back to a fixed platform or a floating installation, to several wells on a tem-plate or clustered around a manifold, and transferring to a fixed or floating facility e.g. FPSO. Subsea Production Systems include seabed located hardware, from wellheads and X-mas trees to

templates, manifolds and connection systems for flowlines and risers, as well as potential subsea power, separation and boosting systems. Also specialized equipment like tooling for installing and maintaining the systems and working over the wells are included. Umbilicals, Risers & Flowlines: are the hardware elements that are required to connect the subsea systems to topside systems of a floating production unit. Marine Operations and Intervention: The installation of hard-ware and servicing it throughout its life cycle requires marine installation and/or intervention vessels. The servicing requires deployment of tooling from an intervention vessel. This SURF catalogue is a description of Norwegian based suppliers and service providers, providing equipment and systems for subsea field developments sorted in the above categories.

Introduction

Engineering & Technical ServicesSUBSEA ENGINEERINGABB: Subsea engineering and FEEDAGR Drilling: Subsea systems studies and engineeringAker Solutions: Subsea systems studies and engineering including power, separation, compression and boosting systemsDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsFMC Technologies: Subsea Engi-neering studies and engineeringGE Oil & Gas: Subsea systems, studies and engineeringOneSubsea: Pumping and com-pression, studies and engineeringReinertsen: Subsea systems, studies and engineering of subsea infrastructureSiemens: FEED studies and detail engineering for power systemsSubsea 7: Subsea engineeringTechnip Norge: Subsea engineer-ing, field development studies, FEED and detail engineering

PIPELINE ENGINEERINGAGR Drilling: Pipeline engineeringAker Solutions: Tie insDNV GL: Pipeline integrity managementGE Oil & Gas: Jumpers and tie-in spoolsReinertsen: Pipeline engineering and tie-ins, including topside modifications, technical analysis, studies to detail design of struc-tures, pipelines, flowlines, risers and umbilicalsSubsea 7: Pipeline engineeringTechnip: Subsea and pipeline engi-neering studies and engineering

TECHNICAL SERVICES4Subsea: Technical analysis, struc-tural analysis of flexible risers, rigid riser and wellhead systems, integrity management of flexible rigid riser and wellhead systemsABB: Technical analysisAGR Drilling: Flow assurance analysis

Aker Solutions: Flow assurance analysisDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsForce Technology Norway: Tech-nical analysis, structural, riser, pipeline, integrity management, specification technology qualifi-cation and risk managementGE Oil & Gas: Flow assurance, risk and technical analysisIFE: Corrosion prediction and inhibitor testingiSurvey: Subsea positioning services for deepwater marine construction workKongsberg Oil & Gas: Software for flow assurance modeling (Leda Flow) and flow assurance serviceMARINTEK: Technical analysis and structural analysis of risers and pipelines

PRODUCTION SERVICES4Subsea: Flexible riser annulus condition monitoring, and

Marine/WO riser operating guidelinesABB: Production services, flow management, condition and performance monitoringAker Solutions: Production ser-vices, flow management, condi-tion and performance monitoringFMC Technologies: Flow managementGE Oil & Gas: Flow management, condition and performance monitoring IFE: Liquid content measurement of gascondensate pipelinesKongsberg Oil & Gas: Start-up/ transient simulation studies, operator training simulators and online production management systems and Riser integrity managementOneSubsea: Production system design and operability, condition monitoring

Subsea Production SystemsTREE SYSTEMSCre8: Intervention and workover control systems

DNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standards

IKM Testing: Mechanical completionSandvik Riser Technology: Completion and work over risers

CONTROLS AND MEASUREMENTABB: Control and measurementClampOn: Provider of subsea sand and corrosion measurement

SURF categories

6

Cre8: Wellhead control panelsDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsForce Technology: Corrosion protection equipmentHitec: Electro-Hydraulic control systems and chemical injectionMulti Phase Meters: Provider of subsea multiphase and wetgas metersPresens: Provider of pressure and temperature instrumentsRoxar: Provider of instrumenta-tion for production and flow assurance monitoring

Siemens: Subsea control systems, sensors, connectors, subsea distribution systemsTESS: hydraulic flying leads, bundles and short length subsea umbilicals

SUBSEA FACILITIESAgility Group : Fabricator of subsea facilitiesIKM Testing: Commissioning serviceKongsberg Oil & Gas: Provider of riser bases, PLETs and PLEMsNymo: Fabricator subsea facilitiesReinertsen: EPC provider of subsea facilities

Trelleborg: Provider of thermal insulation of subsea facilities

SUBSEA PROCESSINGAgility Group: Fabricator of processing systemsDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsNymo: Fabricator of processing systemsPG Pump Solutions: Subsea pumping

SUBSEA POWER DISTRIBUTIONDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsSiemens: Subsea power systems, electro hydraulic and fiber opti-cal distribution

EPC PROVIDERS OF TOTAL SUBSEA SYSTEMSAker SolutionsFMC TechnologiesGE Oil & GasOneSubsea

Umbilicals & PipelinesUMBILICALS & CABLESABB: Power cablesAker Solutions: Provider of umbilicalsDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsIKM Testing: Pre-commissioning service and component qualifica-tion testing of umbilicals and power cables

Nexans: Provider of umbilical and cablesSubsea 7: Umbilicals & CablesTechnip Norge: Provider of flex-ible umbilicals

RISERS AND FLOWLINESAker Solutions: Provider of top tension production risers for TLPsAS Connector: Provider of pipeline connectorsBredero Shaw: Appliers of thermal insulation

EMAS-AMC: Provider of reelable steel risers/flowlinesDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsFreudenberg Oil & Gas Tech-nologies: Provider of compact flanges and stress jointsGE Oil & Gas: Flexible risers and subsea tie-in systemsIKM Testing: Pre-commissioning serviceMarintek: Component

qualification testing of flexible risersSandvik Riser Technology: Sandvik ClikLoc® connector technologySubsea 7: Provider of reelable steel flowlinesTechnip Norge: Provider of flexible risers, flowlines and steel flowlinesTrelleborg: Provider of thermal insulation, fire-and corrosion protection for risers

Marine Operations, Intervention & Subsea servicesSEABED SURVEYS & LIGHT INTERVENTION4Subsea: Service provider of ROV operationsAker Solutions: Seabed surveys, light intervention, ROV based for installations& IMRAS Connector: Provider of remote operations related to inspection maintenance and repairDeep Ocean: Service provider of pipeline inspection, seabed mapping, trenching, IMR, SURF, and decommissioningDOF Subsea: Service provider of offshore survey, seabed mapping and IMREMAS-AMC: IMR contractorIKM Subsea: Service provider of

ROV operationsi-Survey: subsea positioning and seabed mapping solutionsParker Maritime: subsea metrol-ogy using photogrammetrySubsea 7: IMR contractorTechnip Norge: IMR contractorTechno Dive: surface supplied air diving

SEABED INSTALLATIONDeep Ocean: Service provider of installation and construction supportDNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsDOF Subsea: Service provider of construction support and

installationEMAS-AMC: InstallationIKM Subsea: Service provider of ROV operationsSubsea 7: InstallationTechnip Norge: Installation

PIPELAYINGEMAS-AMC: PipelayingIKM Subsea: Service provider of ROV operationsKongsberg Oil & Gas: Provider of Ancillary equipment/installa-tion aids for pipelinesSubsea 7: Offshore pipelayingTechnip Norge: Offshore pipelaying

LIGHT WELL INTERVENTIONAker Solutions: Well intervention

DNV GL: Technical analysis and studies, technology qualification, risk analysis, development of technical standardsFMC Technologies: light well intervention servicesGE Oil & Gas: Riserless lightwell interventionIKM Subsea: Service provider of ROV operations

7

4Subsea AS

4Subsea AS is a leading independent engineering company within subsea technology and renew-able energy. Within subsea technology the business objective is to develop and supply high-end services and solutions to the oil and gas industry, with focus on flexible and rigid risers, and wellhead systems.

THE OVERALL ROLE OF 4SUBSEA: • Provider of independent specialist services and

solutions on flexible pipes, rigid risers and wellhead systems

• Caretaker of riser and subsea systems including supply of life cycle management systems and soft-ware solutions

• Provider of advisory systems for drilling and work-over riser operations

PRODUCTS:• Flexible riser and dynamic umbilical external sheath

repair system• Flexible riser annulus conditions monitoring system• Flexible riser annulus repair clamp• Flexible riser motion monitoring system• Wellhead motion monitoring system• Drilling and work-over riser operational advisory

system• Tailor made riser monitoring systems• Tailor made flexible riser repair systems• Database solutions for collection, systemization and

use of design and operational data• Software solutions for online operational support

SERVICES:Field development• Concept and FEED engineering on flexible riser

systems• Flexible riser system design and operational

guidelines• Upheaval buckling and protection analysis of flexible

pipes and tails

• Marine and work-over riser system engineering • 3. party verification of drilling and work-over riser

system design• 3. party verification of flexible flowline and riser

system

Advanced engineering• X-section analysis of flexible pipes and umbilicals• Fatigue analysis of drilling and work-over riser com-

ponents and wellhead systems

Operational support• Flexible riser annulus testing • Flexible pipe service life analysis including service life

extension• Flexible pipe dissection and failure investigation• Wellhead fatigue monitoring and analysis• Work-over riser operational envelopes • Operational data management and processing

Software development• Web based database solutions built on SharePoint,

MS SQL server, Azure etc• Customized tools related to structural analysis,

measurement data and processing• Integrity management• Integrity management solutions and services related

to flexible riser and flowline systems

REFERENCES:Statoil, BP Norge, Norske Shell, ExxonMobil, Teekay PetroJarl, Framo Engineering, BW Offshore, FMC Technologies, Maersk Production

Contact person: Henning ChristensenTitle: Managing DirectorE-mail address: [email protected] website: www.4subsea.com

ENGINEERING & TECHNICAL SERVICESSUBSEA ENGINEERINGPIPELINE ENGINEERINGTECHNICAL ANALYSISPRODUCTION SERVICES

SUBSEA PRODUCTION SYSTEMSTREE SYSTEMSCONTROLS AND MEASUREMENTSUBSEA FACILITIESSUBSEA PROCESSINGSUBSEA POWER DISTRIBUTIONTOOLING

MARINE OPERATIONS, INTERVENTION & SUBSEA SERVICESSEABED SURVEYS & LIGHT INTERVENTIONSEABED INSTALLATIONPIPELAYINGLIGHT WELL INTERVENTION

UMBILICALS & PIPELINESUMBILICALS & CABLESRISERS & FLOWLINES

8

ABB AS

ABB is a global leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. Sustainability is integral to all aspects of our business. We strive to balance economic, environmental and social objectives and integrate them into our daily business decisions. Technology plays a key role for ABB. We have activities all over the world working to develop unique technologies that make our customers more competitive, while minimizing environmental impact. ABB operates in more than 100 countries and has offices in 87 of those countries to give its global and local customers the support they need to develop and conduct their business successfully.

SERVICES:Modification, service agreements

SELECTED REFERENCES:Project Operator/Owner Delivery System deliveredÅsgard MF Project Statoil Hydro AC/DC Cabel,

TransformersElectrification; Subsea, System calculations/services

Ormen Lange Subsea Statoil Hydro/Shell Transformers Electrification; subseaTyrihans Subsea StatoilHydro MV Drives, Transformers Electrification: Subsea, System calcula-

tions/services, Electrical Control System Topacio Exxon-Mobil Transformers Electrification; subseaCeiba C3/C4 Amerada-Hess Transformers Electrification; subseaCeiba Full Field Amerada-Hess Transformers Electrification; subseaSEPDIS N/A-test unit Transformers Electrification; subseaNa-Kika Shell-Nakika Transformers Electrification; subseaTyrihans Statoil Transformers Electrification; subseaOrmen Lange Statoil Transformers Electrification; subseaJack St. Malo Chevron Jack St. Malo Electrification; subseaBouri Agip Harmony Topside control of subseaGirassol FTOTAL Harmony Topside control of subseaTerra Nova PETRO CANADA Harmony Topside control of subseaJudy Joanne ConocoPhillips UK Advant Master Topside control of subseaBlane / Ula BP Norge 800xA, PLC Connect Topside control of subseaRev Project /Armada Plattform

BG Advant Master Topside control of subsea

Vincent Woodside 800xA, AC800M Topside control of subseaKitan Subsea ENI 800xA, AC800M Topside control of subsea

Contact person: Borghild LundeE-mail address: [email protected] website: www.abb.com\oilandgas





9





Contact person: Tor AardalTitle: VP Sales and Marketing, FabricationE-mail address: [email protected] website: www.agilitygroup.noAgility Group

Grenland Group is an experienced, powerful and competitive Engineering, Procurement, Construction and Installation Company.

The company is situated at 9 different locations in Norway, in addition to Shanghai in China Grenland Group is an attractive employer for highly qualified personnel employing more than 1100 people in Norway and Asia

The company has three main business areas – Solutions, Maintenance and Modifications and Fabrication

SERVICES:• A world-leading fabrication of sub sea products and

systems• Grenland Group has fabricated over 200 manifold

modules, separation systems, integrated template systems, and other sub sea equipment. We also build topside modules.

SELECTED REFERENCES:Fabrication:• Client: FMC Technologies.• Laggan and Tormore Project – Template Manifold

Systems• Ormen Lange Phase III – Template Manifold System• Kirinskoie Project – Manifold and Foundations• Pazflor – 3 off Sub Sea Separation Systems• Statoil Fast Track Projects, Visund Sør, Stjerne, Hyme,

Vigdis NØ,Visund Nord – Template and Manifold Systems

• Ekofisk Phase I and II

10


Contact person: Inge HolmTitle: Vice PresidentE-mail address: [email protected] website: www.agr.com

AGR Facilities Solutions AS

AGR Facilities Solutions AS provides a complete range of solutions for the oil and gas industry. Believing in the importance of choice and flexibility, they recognize that clients need to easily select exactly what they need, wherever they may be. AGR Facilities Solutions AS is an indepen-dent service provider focusing on adding value through integrated teams, efficient technical solu-tions and new business models. The aim is to:

• Achieve optimum field development solutions for our clients

• Assist Clients in the efficient and safe commercializa-tion of hydrocarbon resources, using leading edge technologies and world-class processes

• Focus at an early stage on interaction between reser-voir modeling, drilling and production strategy

• Promote highly skilled and experienced teams which integrate our subsurface, well construction, drilling operations, production system, risk and economics competences

• Provide an economic and commercial view of the investment opportunity

• Deliver safe management and execution of subsea tie-back projects and general field development projects

• Take advantage of the market players and com-petitive bidding when selecting technical solutions, obtaining the best solution for the clients.

AGR Facilities Solutions AS integrates the experience of the Reservoir and Well Management teams. The division’s unrivalled subsea and project management expertise optimizes field development solutions.

PRODUCTS:AGR Facilities Solutions AS can provide, either as a complete team or parts of a team:AGR provides engineering and construction services, technologies, product solutions, and field-life solutions to the oil and gas industry worldwide. The company’s drill-ing technologies include drilling equipment and drilling lifecycle services; engineering solutions comprise studies and front end services, FEED and EPC contracts, offshore oil and gas production facilities, floater designs, jackets, onshore oil & gas receiving and processing facilities, riser systems; maintenance, modifications, and operations (MMO) consist of front end studies, technology services, and decommissioning (offshore facilities), as well as MMO modifications contracts, portfolio contracts, frame agreements; and mooring and loading systems and lifecycle services. AGR Facilities Solutions provides complete design solutions within subsea production systems and technologies; subsurface and well, including reservoir evaluation services, well intervention services, and deepwater well Intervention, as well as surface trees and wellheads, and wellstream processing solutions

comprising process systems technologies, process systems lifecycle and support, and subsea processing systems.

SERVICES:• Feasibility Studies – early phase screening to

determine that there is at least one commercial development option

• Concept Selection – choosing the preferred develop-ment option

• FEED Studies (Front End Engineering Design) – pre-paring for execution

• Preparation of ITT packages and assistance in tender evaluation

• Execution – implementation and management of total subsea tie-back field development projects and general field development projects

• Planning and execution of abandonment projects on behalf of Clients

• Production – managing the reservoir, wells and facilities throughout the producing lifetime in close cooperation with AGR Field Operations.

• Continuous testing of concepts and plans against economic criteria and early identification and plan-ning for key risks and opportunities

• Assist in a structured decision making process – in close co-operation with our Clients. Management teams will work either integrated with Client teams or as a stand-alone team with defined responsibility

• Focus on implementation and follow-up of HSE and quality requirements is maintained through all stages of a development.

SELECTED REFERENCES:Our core team consists of experienced personnel with extensive expertise in:• Conceptual design and front end studies for both

subsea and topside projects• Planning processes from high level to detailed level• Formal evaluation processes – both technical and

commercial• Management of project execution for both subsea

and topside projects• Management of marine operations – installation and

recovery work• Management of operation phase for vessels.




11





Aker Solutions Contact person: Severin RoaldTitle: VP CommunicationsE-mail address: [email protected] website: www.akersolutions.com

Aker Solutions is one of the world’s leading companies within oilfield products, systems and ser-vices. We offer the industry’s most complete portfolio of differentiated subsea technologies with a global manufacturing and service infrastructure.

Aker Solutions is at the forefront of key technologies that drive future field developments. Our new subsea processing and boosting solutions are paving the way for exploring deeper waters, complex reservoirs, harsher fluids, and longer step-outs. A great deal of our energy is spent focusing on HSE, quality and our people – the three greatest assets of our organisation.

Our expertise is the result of our long track record in the subsea industry, our involvement with a wide range of ambitious and professional customers, and the chal-lenges that we have faced and solved together.

We understand the challenge, apply the knowledge and create and use technologies to provide the products, systems and services that deliver solutions to custom-ers. This is ingenuity delivered.

SYSTEM ENGINEERINGAker Solutions has an extensive portfolio of subsea projects with a range of technical requirements to optimise the field life and production profile for our clients. System engineering is the discipline within Aker Solutions that ensures the compatibility of different product solutions within the production system.

SUBSEA PRODUCTS Aker Solutions provides a comprehensive portfolio of subsea technologies, systems and services:

• Control systems • Intervention and workover systems • Manifolds and structures• Power, processing and boosting • Subsea trees• Surface trees and wellheads• Tie-in connection systems • Umbilicals, power cables and direct electric heating

LIFE OF FIELD Through our regional service bases and central support we can deliver globally integrated subsea lifecycle services including:

• Installation and commissioning of systems• Maintenance, repair and spares supply• Refurbishment and recertification• Operational and technical support• Condition monitoring

RISERS • Drilling, production and work-over risers

Computer rendering of Vigdis Workover System Computer rendering of Åsgard Subsea Compression Station

12

mailto:[email protected]

http://www.akersolutions.com



AS ConnectorContact person: Pål Magne HisdalTitle: General ManagerE-mail address: [email protected] website: www.as-connector.com

AS Connector was established in 2000 with a dedication towards deepwater pipelines. Our experi-ence and expertise allow us to deliver equipment and services that ensures reliable remote opera-tions related to Inspection, Maintenance, and Repair of subsea pipelines.

We offer innovative solutions and apply proprietary technologies to improve reliability and cost effective-ness. Our product portfolio includes services and equipment for:

DIVERLESS PIPELINE REPAIRSAS Connector offers a complete range of equipment for subsea pipeline repairs, including:• PIPELINE LIFTING TOOLS

Compact, lightweight and versatile • PIPELINE CUTTING TOOLS

For cutting of both rigid and flexible pipelines• PIPE END PREPARATION TOOLS

Removes coating, welding seam and bevels pipe ends• PIPELINE REPAIR CONNECTORS

Lightweight hydraulic connectors with metal, graphite or elastomer seals

• OUTSIDE CLEANING TOOLS Removal of pipeline coating and welding seam

• DIVERLESS STRUCTURAL REPAIR CLAMPS For repair of pipelines with local leaks, dents and structural damages

OUTSIDE CLEANING AND INSPECTION OF RISERSAS Connector cleaning tool is a completely autonomous tool that can install itself onto risers where it cleans, inspects and verifies the integrity while moving along the riser.

PROTECTION OF FLEXIBLE RISERS AS Connector system for remote installation of protec-tion onto live flexible risers and pipelines was devel-oped for a client to protect more than 24 000 meters of pipelines against wear from the seabed.

PIPELINE FREESPAN CORRECTIONAS Connector has experience from hundreds of diver-less pipeline freespan correction operations, using our proprietary equipment and procedure to create support for pipelines in an extremely quick and cost effective manner.



DNV GL certification of Pipeline Repair Connectors

Autonomous riser cleaning and inspection tool

Remote installation of riser protection

Deployment of Lifting Tool for Freespan correction operation

13





Bredero Shaw Norway AS

Contact person: Eirik SimonsenTitle: General ManagerE-mail address: [email protected] website: www.brederoshaw.com

Bredero Shaw is the global leader in the development and manufacture of pipe coating solutions for the oil, gas, and water industries. Bredero Shaw has more than 75 years of experience, over 27 pipe coating facilities on 6 continents and the largest team of technical and service specialists in the business. Bredero Shaw offers technologically advanced solutions for anti-corrosion coatings, protective and weight coatings, thermal flow assurance coatings, internal coatings, custom coat-ings and field joints for both onshore and offshore applications.

PRODUCTS:Our product range for Offshore Pipelines, Field Joint and Subsea structures are: Anti Corrosion Coatings, Concrete Weight Coating, Thermal Insulation and Internal coatings.

SERVICES:Bredero Shaw understands the offshore environment and is capable of providing complete coating solutions on a global basis. As the leader in offshore pipe coat-ing solutions, the company offers many advantages including:• Complete solutions for all applications including anti-

corrosion protection, thermal flow assurance, protec-tive and weight coating, internal flow efficiency and custom coating

• A wide array of coating solutions ranging from small diameter flowlines and risers to large diameter trans-mission lines. The company has coated pipelines for the most diverse depth, environment and installation conditions.

SELECTED REFERENCES:Bredero Shaw has supplied services to all major off-shore markets in the world and some key projects are:Åsgard, Kristin, Tyrihans, Gjøa, Mars, Europa, Madison Marshal, Thunderhorse, Skarv, Pluto, Bonga, Pazflor, Kizomba, Oseberg, Ormen lange, Langeled, Blind Faith, Block 31, Mafumeira Sul, In-Salah and Goliat

Company name: Bredero Shaw Norway AS Contact person: Eirik Simonsen Title General Manager/VP Global Flow Assurance E-mail address: [email protected] Company website: www.brederoshaw.com COMPANY DESCRIPTION: Bredero Shaw is the global leader in the development and manufacture of pipe coating solutions for the oil, gas, and water industries. Bredero Shaw has more than 75 years of experience, over 27 pipe coating facilities on 6 continents and the largest team of technical and service specialists in the business. Bredero Shaw offers technologically advanced solutions for anti-corrosion coatings, protective and weight coatings, thermal flow assurance coatings, internal coatings, custom coatings and field joints for both onshore and offshore applications.

PRODUCTS: Our product range for Offshore Pipelines, Field Joint and Subsea structures are : Anti Corrosion Coatings, Concrete Weight Coating, Thermal Insulation and Internal coatings. SERVICES: • Bredero Shaw understands the offshore environment and is capable of providing complete coating solutions on a global basis.

As the leader in offshore pipe coating solutions, the company offers many advantages including: • Complete solutions for all applications including anti-corrosion protection, thermal flow assurance, protective and weight

coating, internal flow efficiency and custom coating • A wide array of coating solutions ranging from small diameter flowlines and risers to large diameter transmission lines. The

company has coated pipelines for the most diverse depth, environment and installation conditions.

REFERENCES: Bredero Shaw has supplied services to all major offshore markets in the world and some key projects are:

Linepipe and Field Joint Insulation for Reeling Linepipe and Field Joint Insulation for S-‐lay Linepipe Insulation

Portable plant technology Custom Coating for Anode joints Concrete Weight Coating

Insulation of Valve body in Polypropylene Insulation of Tie-‐Inn connector Insulation of Bends

14

http://www.brederoshaw.com





ClampOn ASContact person: Tonje DahlTitle: Marketing & Communications ManagerE-mail address: [email protected] website: www.clampon.com

ClampOn is a leading manufacturer of topside and subsea, non-invasive Ultrasonic Intelligent Sensors for; sand/particle monitoring, PIG detection, corrosion-erosion monitoring, vibration monitoring, leak monitoring and condition monitoring. All products are based on the same well proven technology platform. Both the topside and subsea instruments incorporate Digital Signal Processing and complete digitalization. All products are non-intrusive and clamped to the pipe/structure. The sensors processes all data in the sensors itself (patented principle). Focusing on core technology has enabled us to sell user-friendly, cost-effective products to customers all over the world and the leading edge technology has made ClampOn capable and competitive in offering the products that the customers are looking for. ClampOn seeks the solutions of tomorrow in order to serve our customers – we want to be your very best supplier: Always Numero Uno.

PRODUCTS:Corrosion-Erosion MonitorVibration MonitorSand/Particle MonitorPIG DetectorLeak monitorWell Collision DetectorCondition Monitor

SERVICES:Real-time monitoring of: • Changes in wall thickness

• Vibration on subsea structures/manifolds• Sand in production lines• Valve leaks• Pigs in pipelines

SELECTED REFERENCES:Worldwide operators and engineering companies (Chevron, ConocoPhillips, Shell, Total, BP, Statoil, ExxonMobil, Nexen, ENI, Dong, Woodside, Saudi Aramco, Aker Solutions, FMC, Cameron, GE i.e.) For additional information please contact us.

Subsea Corrosion-Erosion Monitor (CEM®) Pre-installable

version, first picture showing the CEM without insulation, second

picture, CEM with insulation. Third picture: Subsea Vibration Monitor,

stand alone version.

15


http://www.clampon.com





CRE8 Systems ASContact person: Morten BøgildTitle: CEOE-mail address: [email protected] website: www.cre8-systems.com

CRE8 is an innovative and quality-oriented engineering company designing, manufacturing and assembling Electro/Hydraulic Control systems for the oil and gas industry.

PRODUCTS:CRE8 is a key partner with an unrivalled level of service and support to our customers within engineering and production of Electro/Hydraulic systems and services for both Topside and Subsea applications.

Typical Products:• Intervention & Workover Control Systems,• Hydraulic Power Units,• Subsea Control Modules Test Stand,• Wellhead Control Panels,• Local Control Panels,• Test & Flushing HPU,• Hydraulic & Electric Distribution Panels,• Hydraulic Termination Panels,• X-mas Tree Instrumentation,• Umbilicals incl. Stab Connection Plates,• Hydraulic Accumulation Units,

SERVICES:CRE8 deliver innovative new technology to the market and is directly contributing to the success of our cus-tomers objectives by using standardised and modular

technology. Our team has worked together for many years and is capable of executing the most complex systems within our line of business and our expertise includes:

• HSE-QA• Engineering and Studies• Design, Lay-out, Structural Calculations• Project Management• Supply Chain Management• Production Facilities• Testing Facilities• Courses, Training• Commissioning

SELECTED REFERENCES:The CRE8 team is within it`s area the most experienced in Norway and have references to most of the large international Engineering and Oil & Gas Companies.

16



DEEPOCEAN ASContact person: Bjorn Inge StaalesenTitle: Sales and Marketing ManagerE-mail address: [email protected] website: www.deepoceangroup.com

DeepOcean is an integrated provider of safe, high quality, innovative services and technologies for the subsea industry. Demonstrating an extensive track record, DeepOcean offers a breadth of subsea services including Survey and Seabed-mapping, Subsea Installation, Seabed Intervention, Inspection, Maintenance and Repair (IMR), SURF and Decommissioning.

This strong portfolio of services, coupled with a fleet of owned and controlled specialised equipment and multi-purpose support spreads, enables DeepOcean to bundle its subsea services to deliver cost-effective, tailored solutions to meet individual client needs. The company delivers innovative engineering solutions and turnkey project management for complex offshore operations. DeepOcean’s competitive edge lies in our ability to provide the best combination of personnel, experience, and suitable assets to solve Customer’s subsea challenges.

Operating within a challenging industry, DeepOcean is committed to protecting the health and safety of all people involved with its activities, and thus achieving a safe and incident free workplace, with high standards of environmental responsibility and pollution prevention.

DeepOcean Group service reange includes installa-tion services and the Group has secured assets for increased subsea installation capacity, adding vessels and equipment capacity for installation of umbilicals, fibre optics, risers and reelable pipeline products.

Having its origins in the North Sea, the company now operates on a global basis and has secured work in the North Sea, Mediterranean, West Africa, Brazil, Southeast Asia and Gulf of Mexico.

DeepOcean Group operate more than 15 specialised subsea vessels and own and operate more than 30 ROV systems. DeepOcean Group employ more than 1 200 people. With annual revenues above 500 Million USD DeepOcean Group has established itself as a prudent subsea contractor to oil and gas major operators.

PRODUCTS:DeepOcean provide subsea installation and ROV based services from specialized subsea support vessels. Projects include provision of project management, operational planning, engineering, fabrication, mobiliza-tion/demobilization, offshore crew and have the overall responsibility throughout the projects.

SERVICES:We provide extensive engineering and design support for the planning and execution of offshore and subsea operations in deep water down to 3000 meters. Key to our successful subsea teams is international experience combined with a good local knowledge and ability to adapt to new challenges.

Service range include; • Project Management and engineering• Pipeline and structural inspection• Seabed mapping• Lay support• Subsea maintenance and repair• Seabed intervention – (trenching, ploughing,

dredging)• Flexibles / Umbilicals/ Reeled pipelines installation• Installation and construction support• Subsea decommissioning

REFERENCES:Company has gained extensive experience strong reputation for our services among major international oil and gas operators.



17





DNV GLContact person: Kåre KristoffersenTitle: Senior Vice PresidentE-mail address: [email protected] website: www.dnv.com

DNV GL is a global provider of leading risk management competence. We help customers safely and responsibly improve their business performance, and turn risks into rewards. DNV GL is an independent organization with dedicated risk professionals in more than 100 countries.

DNV GL is one of the world’s leading competence centers, and prime technical advisor for the offshore oil & gas industry.

PRODUCTS:DNV GL is a leading provider of advisory services related to quality and risk management in a lifetime perspective. DNV GL Software is a leading provider of software for managing risk.

DNV GL has developed rules and standards for ships for more than 140 years, and is a world leading classifica-tion society. We also develop rules and standards for the oil- and gas industry. DNV GL Offshores Standards such as DNV GL-OS-F101, DNV GL-OS-F201 & DNV GL Rules for Planning and Execution of Marine Operations as well as associated Recommended Practices.

SERVICES:Verification and Certification: We ensure your projects are properly managed through transparent risk based verification and certification.SHE Risk Management: We develop, implement, main-tain and continuously improve the best practices in SHE management.Technology Qualification: We provide you with the confidence that your technology will function reliably.Asset Risk Management: We safeguard integrity and maintain optimal production safely and cost-efficiently.Enterprise Risk Management: We provide a complete view of your organisations total risk exposure and manage these risks in an integrated way.

Subsea services: Qualification of new technology, per-formance assurance, verification, quality surveillance, certification of material and components, integrity management, lifetime extensions and requalification, fatigue failure and laboratory testing, risk assessment

and risk management, flow assurance and sand management.

Drilling and well services: Qualification of new technology, verification, quality surveillance, integrity management, lifetime extensions and requalification, independent design analyses, fatigue failure and labo-ratory testing, risk assessment and risk management.

Pipeline & Risers services: design verification, inde-pendent design analyses, installation analyses, quality surveillance, integrity management, lifetime extensions and requalification, certification of material and components, qualification of new technology, fatigue failure and laboratory testing, flow assurance and sand management.

Marine Operations verification, review, independent analysis and warranty approval of marine operations.

SELECTED REFERENCES:The above services are provided to major oil companies such as Statoil, ConocoPhillips, Shell, Total, BP ,to major Offshore Contractors and Ship owners.

Typical project references are• Nordstream (Nordstream AG)• Åsgard subsea compression (Statoil)• Well integrity (JIP)• Valemon (Statoil)• Snorre 2040 (Statoil)• Ekofisk (ConocoPhillips)• Gjøa (Statoil)• Tyrihans (Statoil)• Statefjord latelife (Statoil)• Integrity Management Recommended Practice (JIP)• Lined and Cladded Pipelines Recommended Practice

(JIP)

18





Contact person: Olav Arne DrønenTitle: Commercial ManagerE-mail address: [email protected] website: www.dofsubsea.comDOF Subsea AS

DOF Subsea AS has its main office in Norway and is a world-class offshore construction support, ROV, survey, and IRM contractor. With more than 1200 qualified employees and 25 state-of-the-art offshore vessels DOF Subsea AS aims at providing our Customers with products, technologies and services worldwide at any depth and of highest quality.

Further info on: www.dofsubsea.com

PRODUCTS:Engineering studies, Feed studiesSubsea installation and operational services from own vessels.

Project management, engineering, and fabrication. ROV/ROTV operation, AUV & survey operation and processing of data during vessel operation.Final reporting, inspection and project close out reports

SERVICES:IRMMooring design and installation servicesSeabed surveySubsea metrologyPipeline and structure inspection

Module HandlingROV and intervention servicesDiving and intervention servicesConstruction supportSubsea engineeringEPCI Contractor services

SELECTED REFERENCES:DOF Subsea has a long track record with all major oil companies and offshore contractors worldwide

Main Clients are Shell, Total, Petrobras, ExxonMobil, Statoil, BP,ENI, ConocoPhillips, Subsea 7, Technip, Heerema Marine Contractors

19

http://www.dofsubsea.com

Contact person: Halvor TveitoTitle: VP CommercialE-mail address: [email protected] website: www.emas.comEMAS AMC


EMAS AMC is a specialized subsea installation and marine services company with differentiated assets, delivering integrated solutions to the offshore energy industry worldwide.

PRODUCTS:• • SURF (EPIC) • • Cable installation• • Floater and FPSO Installation • • Pipelay and Heavlylift• • Floatover Installation

SERVICES:EMAS AMC has a proven track record of laying pipelines, cables and umbilicals, including coated carbon steel pipelines and bundled applications. In-house engineer-ing resources provide complete design, analysis and installation support, complemented by a modern and versatile fleet of rigid S-lay, flexible and reel lay construction assets. Through strategic supply chain partners, EMAS AMC provides engineering, procurement, installation and construction support for subsea umbilicals, risers and flowlines. With a long history of success, we strive to deliver best-value solutions with a diverse offering of assets, services and engineering designed to fully meet our cli-ent’s need. As part of the EMAS Group, a leading global

offshore contractor providing construction, marine, production and well intervention services, we are well positioned to take on the most advanced and complex projects.

SELECTED REFERENCES:SURF• Det Norske - Ivar Aasen • Statoil - Fram H• Statoil – Smørbukk Extension• Shell - Popeye• BP - Thunderhorse/Atlantis • BP - Blind Faith

Cable Installation• AAB – EWIP• ABB – Goliat• Statoil - Troll

Floater & FPSO Installation• BP - Skarv• Statoil - Gjøa • Exxon Mobil - Adriatic LNG




20


Contact person: Arild SelvigTitle: Director Sales & MarketingE-mail address: [email protected] website: www.fmctechnologies.com/subseaFMC Technologies

FMC Technologies, Inc. is a leading global provider of technology solutions for the energy industry & other industrial markets. FMC designs, manufactures and services subsea production & process-ing systems, surface wellhead systems, high pressure fluid control equipment, measurement solu-tions, marine loading systems, blending and transfer systems, multiphase meters and direct drive systems for the oil and gas industry.

Subsea Systems: We are the world’s leading provider of subsea systems. Our goal is to help customers push the limits of offshore production with subsea processing systems that increase oil recovery from mature fields and enable the development of new ultra deepwater fields. We also engineer our traditional production systems to reduce installation and maintenance costs along with providing field service support that mini-mizes operational costs.

PRODUCTS:FMC Technologies is the leading manufacturer and supplier of subsea production systems, including subsea trees, controls and manifold and tie-in systems. In addition, FMC has a complement of engineering and customer support services, such as system engineer-ing, flow assurance, flow measurement and project management.

SERVICES:FMC Technologies provides a complete range of services for any subsea production system. Our overall mission is to reduce the cost of a subsea system and its service needs.

REFERENCES:Please visit our web-pages http://www.fmctechnolo-gies.com/en/SubseaSystems/GlobalProjects.aspx, to see an overview of our Global Subsea Projects.

The Subsea Global Projects pages provide detailed information for selected FMC Technologies subsea projects worldwide. It is divided in multiple geographical sections featuring key regional projects that have led to our global success.




21



FORCE Technology Norway AS

Contact person: Bjarne T. JensenTitle: Sales Manager E-mail address: [email protected] website: www.forcetechnology.com

FORCE Technology’s operations within Oil & Gas contain several specialized technologies that focus primarily on servicing the offshore industry.

Our competence in Norway is built on strong compe-tences with 30 years of experience within innovative development and use of knowledge and technology.

PRODUCTS:• Advanced Sensor Technology. • Fatigue Monitoring Systems.• Online Riser & Pipeline Monitoring Systems• Corrosion Protection systems (evt. Cathodic

Protection systems)• Corrosion Protection Inspection systems (evt.

Cathodic Protection Inspection systems)• Corrosion Modeling software • Advanced Inspection and Verification Products &

Systems• In-house and customized SW analysis systems for

various product and applications • Maritime Simulator Systems

SERVICES:FORCE Technology can participate and provide technol-ogy and services from the very early feasibility studyphase and all the way to the end of life of your offshoreinstallation.

Our highly skilled management, engineers and serviceteams provides the following applicable disciplines:• Structural design, verification, analysis, modeling and

calculation services• Corrosion and inspection management

• Maintenance Planning• Cathodic protection design and modeling• Cathodic protection inspection and management• Inspection, onshore, offshore and world class subsea

inspection and verification. • Historical and predictive modeling of fatigue pro-

cesses/analyzing-intelligence services.• Pipeline integrity management and services.• Hydro- and aerodynamic optimization of ships’

performance• Simulator systems (SimFlex)• Onboard systems (itinerary planning, fuel optimiza-

tion etc.)• Harbor layout • Human factors (HF) • Wind loads and dynamics of buildings and bridges.• Air pollution and emission reduction • CO2 statements and reduction studies. • Verification and calibration of equipment and refer-

ences within volume, density, flow, temperature, force, pressure and torque

• Polymers – consultancy, analysis and characterization• Surface characterization and analyses • Metals analyses • Trace elements analyses • Destructive testing & root cause failure analyses• Training and certification

REFERENCES:FORCE Technology has decades of proven track records



22



Freudenberg Oil & Gas Technologies

Contact person: Tony Andre HåvelsrudTitle: Managing DirectorE-mail address: [email protected] website: www.vectortg.com

Freudenberg Oil & Gas Technologies (FO&GT) is a global solutions provider of innovative seal solu-tions and differentiated seal products to the global oil and gas industry. The company is focused on the exploration and production (upstream) segment, and acquired Vector Technology Group in January 2013. Our 620 associates serve a wide range of customers including oil and gas producing companies, original equipment manufacturers (OEMs) and engineering and service companies that provide technologies, equipment and services for producing oil and gas from land based and offshore platforms throughout the world.

The Vector products and sealing technology are used in some of the most demanding applications in oil and gas, including: offshore oil & gas platforms, FPSOs, refineries, riser and swivel applications, flowlines and subsea installations, and chemical and petrochemical plants. Featured products are the SPO Compact Flange, the TECHLOK Clamp Connector and the ROV-operated OPTIMA Subsea Connector. Freudenberg Oil & Gas Technologies has locations in Australia, Brazil, Canada, Malaysia, Norway, Singapore, the UK, the United Arab Emirates, and the US.

A BROAD INDUSTRY KNOWLEDGEFreudenberg Oil & Gas Technologies’ high level of technical expertise, broad industry knowledge and problem solving capabilities have earned industry wide recognition, helping to build close working relationships with customers whilst delivering high quality products and customised solutions on-time.In-house capabilities include; raw material stock, manufacturing facilities, coating, NDT and metrology equipment, pressure and hydro testing as well as com-plete pressure, bending and torsion testing facilities. In combination with an efficient supply chain FO&GT is able to deliver both flexible and fast track deliveries in addition to executing larger projects. Its products cover pressure classes up to 15,000 psi and have a proven track record within High Pressure / High Temperature and harsh environment applications where fatigue, high bending and stress loads are of primary importance.

COMMITMENT TO CONTINUOUS IMPROVEMENTFreudenberg Oil & Gas Technologies is committed to designing and manufacturing the safest and most efficient sealing and pressure containment technology in the market. Setting HSEQ as the highest priority throughout a project, core focus is on product quality and development, the recruitment and retention of highly trained and competent personnel, continuous improvement and product installation support. In addi-tion to its commitment to safety, reliability and techno-logical development, FO&GT continuously aims to excel in order to meet or surpass its client’s expectations.

PRODUCT SUPPORTGood quality products need proper support. Accordingly we offer the following services :• Training courses including : Introduction, Handling &• Protection, Assembly/Disassembly, Bolting and

Damage assessment• Dimensional Inspection at customer’s locations or at

FO&GT premises.• Leak Investigation: FO&GT can help by giving an

assessment of leaks, and solving the leak issues.• Damage assessment & repair management• Leak Reduction Initiative : Supervising during

Fabrication, Construction and Commissioning with respect to leak reduction. Reducing leaks and creat-ing significant time saving, due to the reduction of repairs and modifications.



23



GE Oil & GasContact person: Vidar StrandTitle: Regional Subsea Sales ManagerE-mail address: [email protected] website: www.ge-energy.com

GE Oil & Gas is a world leader in advanced technology equipment and services for all segments of the oil and gas industry, from drilling and production, LNG, pipelines and storage to industrial power generation, refining and petrochemicals. GE Oil & Gas also provides pipeline integrity solutions, including inspection and data management, and design and manufacture wire-line and drilling measurement solutions for the oilfields services segment. Our Oil & Gas team leverages technological innovation from other GE businesses, such as Aviation and Healthcare, to continu-ously improve oil and gas performance and productivity.

GE Oil & Gas’s Subsea Systems division offers a broad portfolio of products and services that deliver the reliability, endurance and safety needed to optimize reservoir recovery in extreme environments. We design, manufacture and install core subsea field building blocks – advanced production trees, manifolds and connection systems, compression modules, control systems and flexible pipe – for all of the key production basins around the world. We also provide equipment and expertise for precise remote monitoring and diag-nostics, and life-of-field management services. With an installed base including everything from single shallow-water satellite wells to complex multi-well deepwater developments, our current capabilities include depths to 3,000 m, operating temperatures of 350°F and pressures of 15,000 psi. We are continually evolving technologies that enable moves into even deeper waters and more challenging environments.

OUR NUMBERS:Employees: ~43,000Manufacturing: >90 sites worldwideOperating in over 100 countries

INSTALLED BASE:Subsea drilling systems: used on ~50% of all subsea wellsSubsea production: >2,500 systems installedDownhole measurement systems: >10,000 worldwideFlexible pipe manufactured since 1989: >3,500 nKm

PRODUCTS:Subsea Systems: Subsea trees & wellheads, Subsea power & processing, Controls, Manifolds, Flexible risers, Flow lines, Speciality connectors & pipes, Floating production systems. EPC Subsea Production Systems, Templates, PLET, PLEM, Subsea Tie-in systems.

SERVICES:Remote monitoring & diagnostics, Pipeline inspection & integrity services, Conceptual and FEED engineering, Risk and Mitigation analysis, Flow assurance, Life of Field Management

GLOBAL CONTACTS:• North America: Edward McMahon, Senior Sales

Manager (Houston), tel +1 281 405 3534• Latin America: Fernando Martins, Sales Executive (Rio

de Janeiro), tel. +55 21 38240613• Scandinavia: Vidar Strand, Regional Sales Manager

(Stavanger), tel. +47 51 63 49 66• Russia/Caspian: Anton Guzev, Commercial Leader

(Moscow), tel. +7(495)9811313 5164• Asia Pacific: Nick Taylor, Regional General Manager

(Singapore), tel. +65 6864 3624• Europe/EUK: Darren Parker, Regional Sales Executive

(Aberdeen), tel. +44 1224 852297• Gulf/North Africa: Ahmed Heraize, Senior Sales

Manager (Egypt), tel. +20 223221320• Angola/Sub-Sahara: Marc Tuminaro, Regional Sales

Executive• Australia: Derek Price, Regional Sales Manager

(Perth), tel. +61 8 65957732



24


tel:%2B1 281%C2%A0405 3534

tel:%2B55 21 38240613

tel:%2B47 51 63 49 66

tel:%2B7%28495%299811313

tel:%2B65 6864 3624

tel:%2B44 1224 852297

tel:%2B20 223221320

tel:%2B61 8 65957732





Hitec Products ASContact person: David SouthTitle: Sales & Marketing ManagerE-mail address: [email protected] website: www.hitecproducts.no

Hitec Products AS’ main business areas are high quality Electro-Hydraulic control systems and Chemical Injection to the Oil & Gas Industry. We are organised in four divisions; TOPSIDE SYSTEMS, SUBSEA SYSTEMS, OILFIELD SYSTEMS and CUSTOMER SUPPORT. We are a project oriented organisation and our employees have a culture for succeeding and exceeding our clients expectations.

PRODUCTS:Highly innovative electro-hydraulic control and chemical injection systems with a modular and standardized approach in design. We have high focus on user inter-face and safety, as well as • IWOCS - Installation Workover Control Systems with

HPU• Operator Control Room for Workover Systems• HPU - Production / Subsea Hydraulic Power Units,

Ballast HPU, Wellhead HPU, Drilling HPU• TFHPU Test & Flushing Hydraulic Power Units• SCMTS – Subsea Control Module Test Stand• TUTU – Topside Umbilical Termination Unit• WHCP – Wellhead Control Panel• CIU – Chemical Injection unit• MIU – MEG / Methanol Injection Unit• FCP w/IRCD – Flow Control Panel w/ Injection Rate

Control Device • LCP – Local Control Panels• Instrumentation for Xmas trees• Accumulator Packages

SERVICES:Hitec Products assists in all stages of your project, including FEED assistance, Project management,

Engineering & Design, 3D modeling and real life proto-typing, procurement, manufacturing and testing.

Our Customer support centres are dedicated to provid-ing the necessary service and solutions to ensure imme-diate and long term satisfaction to clients worldwide. Our staff is service oriented and has the necessary skills and know-how to solve our clients challenges.Our support bases are in Stavanger, Bergen and Singapore and can offer:• Spare Parts• Life Cycle Support• Commission and Installation• Testing and flushing• Surveys & Inspection• Modification and Maintenance• Service and re-certification• Xmas Tree Instrumentation

REFERENCES/GLOBAL CONTACTS:We at Hitec Products have enjoyed working with our cli-ents on more than 800 projects. Our clients include the major oil companies, smaller independent oil companies and engineering companies, as well as key players in the subsea, oil service and FPSO market.

25



IKM SubseaContact person: Hans FjellangerTitle: Business Development ManagerE-mail address: [email protected] website: www.ikm.no/ikmsubsea

IKM Subsea is an independent ROV operator, based in Norwegian specializing in ROV Operations, trenchers and related subsea equipment. As part of IKM, a large multidiscipline sub supplier to the oil & gas industry, we operate globally out of Bryne near Stavanger. We do have branch offices in Singapore and Malaysia

PRODUCTS:Electrical Workclass ROVElectrical Jet TrencherInspection Class ROV

SERVICES:• ROV Operations,• Trencher Operations

SELECTED REFERENCES:• Statoil ASA• Nexans Norway• Siem Offshore• Solstad Offshore• Olympic Shipping• K-Line Shipping• Statnett• Offshore Installation Group (OIG)



26





IKM Testing ASContact person: Jens BolmeTitle: International Sales & Marketing DirectorE-mail address: [email protected] website: www.ikm.no

IKM Group is a multidiscipline service supplier to the Oil & Gas industry. Through close collabora-tion with our clients and joint tenders the group is continuously growing and developing, and we endeavor to deliver cost effective, high quality solutions to our customers. Our ambition is that all of our clients will choose IKM as their preferred supplier, and the priority area is growth. IKM will continue to establish new businesses, make strategic acquisitions and alliances in order to steadily develop IKM as a quality supplier.

IKM Testing is a company within the IKM Group. The company was established in 1992 and is a global sup-plier of Mechanical Completion and Commissioning services both to the onshore and the offshore industry. IKM Testing has its head office at Sola, Norway and departments in Bergen, Kristiansund and Hammerfest. Subsidiary companies have been established in UK, Spain, Singapore, Indonesia, Thailand, Canada, Australia, Brazil, Kazakhstan, Poland, Korea, Malaysia and Mexico.

IKM Testing’s operations can capitalize on the vast resources, personnel and equipment available from within own infrastructure as well as through locally established partnerships, which enable it to meet client requirements and demanding schedules. IKM Testing has participated in large scale projects and performed its services in all parts of the world.IKM Testing has experienced and multi-skilled personnel with high documented competence. To reinforce our expertise we have established our own training and competency centre, which is a very useful facility both for internal and external use.

SERVICES:• Pipeline, Flowline and Spools Pre-Commissioning

• Pigging and Gauging• Flooding and Testing• Dewatering/Drying

• Umbilical Testing• Decommissioning• Mud Recovery without Riser (MRR)• Cuttings Transport System (CTS)

• Slop Treatment (Offshore)• Scale Squeeze Inhibition• Nitrogen services • Video inspection • Pressure testing • Bolt working services• Hot oil flushing • Chemical cleaning • Hydrojetting • Drying/Air treatment• Preservation • Cold cutting services• On-site machining services• Pipe freezing • Certification of accumulators

SELECTED REFERENCES:IKM Testing has extensive international experience, both topside and subsea;• Cidade de Sao Paulo FPSO (Brazil)• South Pars Phase 6/7/8 (Iran)• White Rose FPSO (Canada)• Adriatic LNG (Spain)• Kashagan (Kazakhstan)• Skarv FPSO (Korea)• Scarabeo 9 (China)• Hammerfest LNG/Snøvhit (Norway)• Ormen Lange Gas Plant (Norway)• Cepsa La Rabida (Spain)• Laminaria (Australia)• Oudna (Tunisia)• Bouri (Libya)

27



Institute for Energy Technology

Contact person: Rolf NyborgTitle: Department Head E-mail address: [email protected] website: www.ife.no

Institute for Energy Technology (IFE) is an independent research institute for energy and nuclear technology. The institute has a permanent staff of 550 and an annual turnover of about 125 MUS$. Within petroleum technology IFE has expertise in reservoir tracer studies, multiphase transport, corrosion control, and control room engineering. More than 80% of the turnover is financed by industry and more than 50% is financed by international clients.

SERVICES:IFE is mainly a research institution and as such delivers new knowledge, methods and technology for our clients. In addition to research projects some research-based commercial services are delivered.

Within the SURF-area IFE’s Corrosion and Materials Technology Department serves the industry with cor-rosion mitigation testing for safe use of carbon steel in multiphase flow-lines with presence of H2S and CO2. IFE delivers services for measurement of liquid content of gas-condensate pipelines using tracer technology.

IFE provides testing and consultancy services for:• corrosion control in gas condensate pipelines using

pH-stabilized glycol,• corrosion inhibitor qualification for high temperature

or high H2S content service,• scale control in MEG regeneration systems serving

gas-condensate tie-backs,• measurement of liquid content of gas-condensate

pipelines .

SELECTED REFERENCES:• Studies of pH stabilization for corrosion control, top

of line corrosion studies and operation of MEG regen-eration system for an offshore gas field with high CO2 content. Project for a major IOC, 2003 – 2009.

• Evaluation and field support for scale and salt precip-itation in glycol regeneration system for an offshore gas field. Project for a major IOC, 2002 – 2008.

• Studies of pH stabilization for corrosion control for a deep water offshore gas field. Project for a major IOC, 2004 – 2006.

• Corrosion inhibitor qualification for an offshore oil field with high H2S content. Project for Agip KCO, 2002 – 2005.

• Liquid content measurement of gas-condensate pipelines on the Norwegian Continental Shelf from 2003 and onwards; Huldra–Heimdal, Troll–Kollsnes, Kvitebjørn – Kollsnes, Mikkel – Åsgard, Midgard – Åsgard.



28





iSURVEY GroupContact person: Øivind RøeghTitle: CEOE-mail address: [email protected] website: www.isurvey-group.com

The iSURVEY group is a technology driven service company providing state of the art services to the offshore energy industry.

PRODUCTS:iSURVEY was founded in 2004, today consisting of 60 dedicated employees providing:• Experienced offshore surveyors and project manage-

ment staff• The iSURVEY system solutions (see image below)• Online 3D visualisation• Gyro and USBL calibrations• LBL network planning, installation and operation• Bathymetric data acquisition and processing• Survey procedures• Survey and position data processing and reporting • Geodetic consultancy• GIS and CAD

All iSURVEY services are based on well proven HSE and ISO 9001:2008 certified procedures.

SERVICES:Based in Oslo and Singapore, iSURVEY offers specialist survey and positioning services supporting professional offshore operations internationally:• Rig and FPSO installations• Deep water marine construction work

SELECTED REFERENCES:The iSURVEY track record comprises projects world wide for the major oil companies and marine contracts.

29



KONGSBERG Oil & Gas Technologies

Contact person: Terje GunnerødTitle: SVP Sales & MarketE-mail address: [email protected] website: www.kongsberg.com/en/KOGT

World Class SURF Technology Expertise. Kongsberg Oil & Gas Technologies’ has over 20 yeras of development and project experience in SURF systems-, technology and management. We offer proven technical excellence within subsea flowline and riser design, installation, operation and integrity. Our engineering capabilities and delivery capacity span from individual products and components to single source supplier of SURF technology, services and products to our worldwide customers. With over 500 completed projects Kongsberg provides essential engineering, consul-tancy and management services for SURF systems in the upstream oil & gas industry. Our customers are manufacturing companies, installation contractors and major oil companies.

PRODUCTS: (Please go online for additional information)We develop and deliver a range of field proven special-ized products and technologies from concept and flow assurance studies to online monitoring systems for optimum vessel positioning during drilling and work-over operations to subsea pigging and installation systems for pipelines and flexible pipes.Subsea Hardware: Pig Launchers/Receivers. PLETS, PLEMS, Structures (steel and GRP), Manifolds-, tie-in systems and riser base structures.Riser Monitoring Systems (RMS): Innovative monitoring system which increase operation envelopes, reduce riser stress and wellhead loads, reduce wear and pro-vide critical information for the drill vessel in operation. Ancillary equipment/installation aids for pipelines: A wide range of ancillary equipment for efficient and safe work on offshore construction sites, all custom designed to suit each project’s exact requirements.LedaFlow®: Following a decade of development and industry collaboration, the next generation dynamic multiphase flow simulator is available. LedaFlow is addressing a market demand for a better flow assur-ance modeling tool. Flow Assurance Services Experienced FA engineers can perform advanced multiphase flow simulations and flow assurance analysis by use of LedaFlow® and other available tools. Kongsberg pioneered integrated flow assurance systems. + 80 solutions have been implemented world wide.

REFERENCES: (Please go online for additional information)The following examples are just a few of the hundreds of successful projects we have undertaken throughout the world:

Flexible pipe and umbilical analysis recent projects • Statoil Gjøa and Vega verification• Statoil Ormen Lange Southern field development 3rd

party analysis• Total Moho Bilindo fatigue• Statoil Troll B residual service life• Talisman Varg extended service life • Statoil Åsgard minimum flow • Marathon Volund water injection • SDAG Shtokman riser system

FlexStress project reference List • ExxonMobil multiple projects • Statoil Gjøa• Talisman Varg • Statoil Snorre 2040 life extention • Total Moho Bilondo • Statoil Visund

Recent hardware delivery reference list • Pig Launcher & Receivers: Technip (Gjøa, Ekofisk,

Yme,) Acergy (Ormen Lange), Subsea 7 (Vega)• PLET 5 off Subsea 7 (Vega) • RMS More than 20 systems delivered • Thermohydraulic analysis: – Flowline sizing – Thermal

insulation studies • Transient simulations: – Start-up – Shutdown –

Ramp-up – Turndown • Slugcatcher sizing • Inhibitor tracking



30


MARINTEKNorsk Marinteknisk Forskningsinstitutt AS

Contact person: Egil Giertsen / Øyvind HellanTitle: Research DirectorE-mail address: [email protected] website: www.marintek.com

The Norwegian Marine Technology Research Institute (MARINTEK) performs research and develop-ment for companies in the field of marine technology. MARINTEK is a company in SINTEF, the largest independent research organization in Scandinavia, and develops and verifies technological solutions, business and operating concepts for the shipping, marine equipment, ocean energy and petroleum industries. MARINTEK’s headquarters and laboratories are in Trondheim, Norway, with subsidiaries in Houston, Texas and Rio de Janeiro, Brazil.

PRODUCTS:Software• BFLEX - computer tool for analysis of extreme

stresses and fatigue in flexible pipes • MACSI - Marine crane simulation • MIMOSA - A market leader in mooring analysis • MOOROPT2 - A MIMOSA TOOLBOX Program • MOPSIM - Real-time simulator for complex marine

operations • RIFLEX - Riser system analysis program • SIMLA - a special purpose computer tool for engi-

neering analysis of offshore pipelines during design, installation and operation

• SIMO - Simulation of marine operations • SIMVIS - Visualization of simulated marine operations • UFLEX - Non-linear stress analysis of complex umbili-

cal croll-sections • USFOS - Progressive collapse analysis • VIVANA - Calculation of vortex induced vibrations of

slender marine structures

SERVICES:Slender Offshore StructuresMARINTEK is at the forefront of development of advanced numerical and experimental methods for structural analysis, based on a unique combination of theoretical knowledge, extensive laboratory facilities and engineering expertise.• Dynamic analysis of risers, umbilicals and power

cables• Stress and fatigue analysis of complex cross sections;

flexible risers, umbilicals and power cables• Full scale and component qualification testing of

flexible risers, umbilicals, power cables, hoses and mooring lines.

• Static and dynamic analysis of pipelines; simulation of pipe laying, free span assessment, upheaval buckling and snaking, on-bottom stability

• Model testing and numerical analysis of vortex-induced vibrations (VIV) on deepwater risers and flowlines

• Reliability assessment of risers and pipelines

Marine OperationsMARINTEK can verify the feasibility, planning, and control of complex marine operations.• The positioning of surface vessels• Forces on, and motions of, complex geometries• Heave compensation devices• Simulation of subsea operations and platform

installations• Procedures for berthing and departure of floating

LNG terminals in shallow water

Laboratory facilities • Ocean basin• Towing tanks• Marine structures laboratory

SELECTED REFERENCES:• STATOIL• Hydro• Nexans• NKT• Chevron




31



Multi Phase Meters AS (mpm)

Contact person: Bjørn L. Pedersen Title: Sales DirectorE-mail address: [email protected] website: www.mpm-no.com

Multi Phase Meters (MPM) is an oil service company, specializing in supplying multiphase- and wetgas meters. MPM is a wholly owned subsidiary of FMC Technologies with headquarters in Stavanger, Norway.

MPM aims to serve customers in all regions of the world and has sales and service centers in Stavanger (Norway), Dubai (UAE), Houston (USA), Buenos Aires (Argentina), Milan (Italy) and Singapore.

PRODUCTS:MPM manufactures HighPerformanceFlowmeters for use in both multiphase & wetgas applications. The MPM Meter differs from conventional meters by using a new and patented tomographic technology platform – 3D BroadbandTM.

The MPM HighPerformanceFlowmeter is designed for highest operational stability and performance, and tests have provided exceptional results in terms of stability, accuracy and repeatability. An extensive operator-driven test and qualification program was completed to qualify the MPM Meters for use in topside and subsea field applications.

The MPM meter is made to measure the oil companies’ most valuable asset.

MPM key words: • It works• It’s accurate• It’s easy to use• It’s self-calibrating

Our Subsea meter withstands • a depth of 3500 meters,• a pressure of 1000 bar,• a temperature of 250°C

SERVICES:MPM recognizes the importance of dedication and long term commitment towards our customers. The organi-zation is finely tuned towards performing high quality worldwide service and support. The high emphasis we put on this is reflected in our excellent customer satisfaction score.



32



Nexans Norway ASContact person: Bjørn BjørnstadTitle: Sales ManagerE-mail address: [email protected] website: www.nexans.no

Nexans Norway AS is one of the world’s leading suppliers of subsea umbilicals and high-voltage submarine cables, and is the leading supplier of power and telecommunications cables in Norway. Nexans Norway AS develops, manufactures and markets submarine, land and offshore umbilicals, and cables for power and telecommunication transmission. The company also markets cables manufactured by NVC in Japan, a production company which is a joint venture between Viscas and the Nexans group.

Nexans Skagerrak AS is a wholly owned subsidiary of Nexans Norway AS. Nexans Skagerrak AS is engaged in transport, laying and installation of submarine power cables and owns the cable laying vessel C/S Nexans Skagerrak.

Nexans Norway’s plants are located in Namsos, Rognan, Karmøy, Halden and Langhus and the company’s head office is in Oslo. Nexans Norway has approx. 1,300 employees.

Nexans Norway AS is part of the French Nexans group – one of the world’s largest cable manufacturers - and the company is a wholly owned subsidiary of Nexans participations SA in Paris.

PRODUCTS:Nexans has worked with cables for almost 100 years, and has more than 25 years experience as a manufac-turer of umbilicals for the offshore industry adapted to harsh North Sea conditions.

Nexans has qualified control umbilical and power umbili-cal for 3000 meters water depth, and aims beyond this.

Nexans provides complete EPC (engineering, procure-ment and construction) umbilical solutions from engineering to manufacturing and the qualification and testing.

SERVICES:Nexans provide installation services with its fully owned installation vessel Skagerrak, and trenching services with the ROV based CAPJET.

SELECTED REFERENCES:Among our references are Atlantis, NaKika, Ormen Lange, Snøhvit, Norne, BP King, Tyrihans, Mexilhao, Usan and Tambau and Urugua. Read more on www.nexans.no/umbilical



33

http://www.nexans.no/umbilical

http://www.nexans.no/umbilical



NYMOContact person: Einar AanonsenTitle: Director Projects and MarketsE-mail address: [email protected] Company website: www.nymo.no

Nymo is a full-service engineering, procurement and construction company within the oil & gas and process industry. Nymo offers total solutions to customers and has earned confidence for versatil-ity, reliability, quality service, timely delivery, good project management and commitment to HSE excellence.

Nymo has extensive experience and expertise in fabrica-tion of subsea facilities.

PRODUCTS:Our staff is well experienced in detail design, procure-ment of materials, fabrication and testing of complete units for seabed installation. The fabrication skills include all relevant material qualities used in subsea equipment.Units delivered:• Manifolds for multi well field developments• Satellite production wellhead frames• Injection wellhead frames• Seabed compression unit• Tie-in spools• Well jumper kit

SERVICES:Nymo has since 1990 fabricated subsea structures and piping systems for subsea production and injection

wells. In total number approx 100 units are delivered mainly for the Norwegian continental shelf. Most known fields delivered to are Troll Oil Province in the North Sea and Snøhvit Gas field in the Barents Sea. Detail engi-neering is available for structural and piping disciplines. Special subsea platforms with depth of 10 m and 30 m are available for submerged testing. Overhead lifting capacity of 200 MT.

SELECTED REFERENCES:Some major projects:• Tordis, EPC contract subsea manifold• Snorre B, Fabrication of subsea manifold and

structures• Troll Olje, Fabrication of 23 off manifolds, 5 off riser

bases and 5 off satellites• Snøhvit, 6 off template manifold subsea• BP Angola Block 18, Well jumper kit fabrication• Alvheim, Manifolds and Riser bases• Yme/Gjøa, subsea tie-in spools• Bøyla, Manifold and structures



34





OneSubsea Processing AS

Contact person: Jan EldeTitle: Sales Manager, Pumps & Subsea Systems, Western HemisphereE-mail address: [email protected] website: www.onsesubsea.com

OneSubsea Processing is one of the world’s leading companies within Subsea Multiphase and Single-phase Boosting systems, Subsea and Topside Metering systems and Swivel and Marine Systems. The company is engaged in major development and delivery projects with a significant market shear for new- as well as mature, marginal and deepwater field developments. The company develops and delivers Subsea Boosting and Swivel systems under EPC contracts or as integrated supplier for subsea productions systems. Deliveries are supported by system integration testing performed in advanced Assembly and Test Dock facilities.

OneSubsea has established a well organized Customer Support organization for the after sales market, installation, commissioning and start-up, Service Agreements, 24/7 on-call support for Clients.

PRODUCTS:• Multiphase and Single-phase Booster Pump systems

for Subsea, Topside and Land applications • Multiphase Compressors systems for topside and

subsea installations

• Multiphase /Wet Gas Flow Meters for topside and subsea installation

• Swivel stack / Turret systems for FPSO• Submerged offloading systems• Offshore Cryogenic Transfer systems

SERVICES:OneSubsea provides a complete range of services for both subsea production systems and subsea processing systems. Condition based- and planned preventive maintenance and operational support is practiced using the Client Web-portal FRIEND (Field Remote Interactive ENabling Diagnostics).

REFERENCES:Please visit our website www.onesubsea.com for more information and references.

35

http://www.onesubsea.com





Parker MaritimeContact person: Rolv JohannessenTitle: Marketing ManagerE-mail address: [email protected] website: www.parkermaritime.no

Parker Maritime is business unit of Parker’s Energy Products Division (EPD) that provides global subsea metrology, survey, and dimensional control and installation solutions. Our products and services are catered to the offshore oil, gas and maritime markets. When your project requires the highest performance and accuracy, our solutions will surpass your expectations.

PRODUCTS:Parker Position Monitoring systems, ParkerPMS™ and ParkerRPMS™

SERVICES:Parker Maritime is a provider of many services related to the oil, gas and maritime industries, including: Subsea metrology (SICAMS®), on and offshore dimensional control survey, windmill installation attitude survey, vessel and ROV gyro attitude verifications, GPS

‘health-checks’, and seabed mapping. In addition, Parker Maritime has developed a position monitoring system, ParkerPMS™ for shuttle tankers and vessels.

SELECTED REFERENCES:Statoil, Subsea 7, Technip, Aker Solutions, Petrobras, Teekay, Knutsen OAS, Hyundai, Canship Ugland, Saipem, Maersk, DeepOcean, Oceaneering, WestCon, Bibby Offshore, BP, Kongsberg Maritime, Fluor.

Parker Maritime survey engineer advising during the mono-pile installation at Meerwind

Subsea Metrology with SICAMSg

36



PG Pump Solutions(Ing. Per Gjerdrum AS)

Contact person: Mads GjerdrumTitle: VP General Manager Oil & GasE-mail address: [email protected] website: www.pergjerdrum.no

PG Pump Solutions has delivered innovative and tailor-made pump solutions to the offshore and marine markets in more than 20 years. Base on pump knowledge and experience, as well as high-quality sub-suppliers and numerous pump start-ups and services, the Oslo-based company is expanding activities to cover worldwide deliveries of a challenging and new subsea liquid pump solution.

PRODUCTS:PG MAPS – Subsea Pump and control systemsPG-MAPS – Multi Application Pump Solution for offshore and subsea – is designed for abrasive liquid handling. The multipurpose pump for heavy duty pump-ing applications is a new and unique pumping solution developed by combining hose diaphragm pump heads and reciprocating power end using a permanent magnet

linear electric motor. The unit has high pressure rating combined (< 350 bar) with superior volume capacities.

SERVICES:The PG service department and workshop in Drammen area performs repair, startup and commissioning of PG pumps supplies, worldwide.



37


PresensContact person: Martin NygaardTitle: CFO/Business DevelopmentE-mail address: [email protected] website: www.presens.com

PRESENS supply high performance sensor solutions for subsea oil and gas and space. PRESENS develops and manages the entire chain from core technology to sensor system and is one of the market leaders for high performance sensors. The company has state of the art development and production facilities in combination with the office facilities in Oslo, Norway. Presens first subsea field installations was in 2000 and several thousand sensors are installed subsea worldwide deliv-ering extremely accurate and stable measurement of pressure and temperature.

PRODUCTS:PRESENS’ sensor systems are specifically made to deliver high-accuracy pressure, temperature and flow measurements in severe environments such as offshore oil and gas operations throughout the life of the field. The highly reliable and accurate data generated by our sensors is ideal input for advanced monitoring and control systems – allowing them to operate to their full potential.

Presens sensors are being used by market leaders in a wide range of subsea applications. Examples includes subsea production trees and manifolds, separation/processing, pumping systems, pipelines, water and chemical injection, production system intervention, ROV/AUV, transponders/deep water positioning, depth measurement, sea bed mapping etc.

Product portfolio includes pressure and temperature sensors for subsea production trees, differential pres-sure sensors for flow calculations such as in single and multiphase meters, flow sensors for subsea processing and boosting, single phase flow meters, chemical

injection valve pressure sensor etc.

SERVICES:Presens can provide key capabilities required for developing, evaluating and qualifying new products / technology for subsea. Presens has distinctive know-how covering the entire technology chain from technol-ogy development, to the core sensor to mechanical packaging. Presens is recognized as having world class engineering capabilities within multiple fields such as sensing technology, mechanical design, electronics design, software, weld design & assembly, and subsea qualification and documentation.

REFERENCES:PRESENS has delivered O&G subsea sensors worldwide since 1999 enabling extremely accurate and stable measurements for advanced monitoring and control systems allowing them to operate to their full potential. More than 6000 sensors are installed subsea in all major subsea regions. Presens is delivering to all major subsea production system suppliers and oil&gas companies.




38



REINERTSEN ASContact person: Torkild R. ReinertsenTitle: Managing DirectorE-mail address: [email protected] website: www.reinertsen.no

Reinertsen AS is a family owned company supplying studies, FEED and EPCI projects to the Oil & Gas and industry. The company was established in 1946.

In 2012 Reinertsen presented a turnover of 480 mil-lion Euro. With its 2500 employees, REINERTSEN are represented in Trondheim (main office), Orkanger, Oslo, Bergen, Hammerfest, Gothenburg and Murmansk.

REINERTSEN has been a supplier to the oil companies within subsea engineering for more than 30 years and within topside EPCI modifications and M&M for more than 15 years. The engineering division has a permanent staff of 1600.The company own and operate two offshore fabrication yards (Trondheim and Murmansk) and a multidiscipline offshore installation division.REINERTSEN has many large and demanding clients requiring streamlined execution of large projects. This has driven a fast development of systems within project execution and HES&QA, including engineering, procure-ment and material management.

PRODUCTS:REINERTSEN is an EPC provider of Subsea facilities, including manifolds / templates/ riser-bases/ protec-tion structures/pipeline end terminations (PLEm/PLET).

SERVICES:Reinertsen provides services related to all phases of a project ranging from pure Engineering services and studies through to full EPCI services.

Reinertsen provides engineering services related to subsea systems – studies and engineering of subsea infrastructure; Pipeline engineering & Tie-ins – includ-ing topside modifications; Technical analysis, studies to detail design of structures, piplines, flowlines, risers, and umbilicals.

SELECTED REFERENCES:Visund Nord RiserbaseRiserbase for Visund Nord Project. EPC supply of a com-plete riserbase with SSIV and actuator and connections to 8” riser and 10” pipeline. Fast track project.

ÅSGARD SUBSEA COMPRESSION DETAIL ENGINEERING (2011, ongoing) Client: StatoilDetail engineering of all pipelines and PLEM’s and PLETs for the Åsgard subsea compression project including several tie-ins, spools as well as routing of power cables and umbilicals

ORMEN LANGE SUBSEA COMPRESSION (2010, ongoing), Client: Norske Shell ASOrmen Lange Subsea Compression - Field lay-out and flowline concept studies. Reinertsen had the overall responsibility for field-layout and cost and schedule estimates for the flowline system.

SNØHVIT FUTURE (2011, ongoing), Client: StatoilConceptual study of Snøhvit Future Development including conceptual flowlines and pipeline engineering and overall field layout development including optimiza-tion of number and location of PLEM`s and flowline manifolds.

SKARV SURF FEED, (2005–2007), Client: BPA complete design of the subsea systems, umbilicals, risers, flowlines (SURF) and the gas export pipeline to Åsgard Transport System.

ORMEN LANGE PIPELINE ENGINEERING, (2003 to 2012), Client: Norsk HydroDetail engineering of 2 x 30” multiphase pipelines, 2 x 6 5/8” MEG lines and two umbilicals from the Ormen Lange Field to Aukra. The engineering also includes the landfall and the first 33 km of the 42” Langeled pipeline.



39


RoxarContact person: Anne-Lisbet Hatlem LindalTitle: Corporate Marketing ManagerE-mail address: [email protected] website: www.roxar.com

Roxar, a division of Emerson Process Management, is a leading provider to the oil & gas industry of advanced technology for production optimisation, production regularity and improved decision making. Our technologies help operators maximise their reservoir’s performance.

Roxar understands reservoir description and flow dynamics. Our technologies take operators through the entire reservoir lifecycle from interpretation of geologi-cal data through to collection and analysis of real-time production data. Roxar’s 3D reservoir geological model-ling and simulation software, and our comprehensive range of topside, subsea and downhole metering and monitoring instrumentation maximises return from your reservoir assets.

PRODUCTS:Multiphase meters (Topside / Subsea / Downhole)Wetgas meters (Topside / Subsea)Sand monitors (Topside / Subsea)Pig detectors (Topside / Subsea)Pressure and Temperature gauges (Downhole)Roxar downhole Wireless PT sensor systemChemical Injection valves (subsea)

Intrusive Corrosion Monitoring (Topside / Subsea)Non Intrusive Corrosion Monitoring (Topside / Subsea)Field Signature Method (Topside / Subsea)Subsea ROV retrieval systemProduction management Software

SERVICES:TrainingEngineering supportGlobal on-site supportRemote technical supportPreventative maintenanceService project managementTechnical service agreements

SELECTED REFERENCES:Please contact Roxar for references.




40




Sandvik Riser Technology AS

Contact person: Tore SalteTitle: Sales ManagerE-mail address: [email protected] website: www.clikloc.com

Sandvik Riser Technology AS design and manufacture the brand Sandvik ClikLoc® connector and riser tubes to be used within well completion and intervention work. Sandvik Riser Technology is a part of Sandvik Material Technology AB who is a world leading manufacture of high value-added products in advanced stainless steel and special alloys.

PRODUCTS:The Sandvik ClikLoc® – a revolution in multiple make and break connections

The new, patented, high performance ClikLoc from Sandvik Riser Technology AS combines hook-up time savings with increased operating safety. Make and break can be reduced by at least 80%, and since no loose components or make-up tool are involved, the hazard of falling objects has been eliminated.

Designed and manufactured in accordance with ISO 13628-7 and DNV GL certified for completion and work-over riser systems, the Sandvik ClikLoc® is a bayonet type, stab-in, self centering coupling which means no rotation of the riser during set-up. The metal to metal seal needs very low pretention – the weight of the riser joint is sufficient – and the seal guaranteed when locked. The seal is also reusable allowing multiple make and breaks.

Sandvik ClikLoc® is suitable for sour and standard service, the connector operates at temperatures up to 121ºC and pressure up to 10.000 psi.

The Sandvik ClikLoc® is made from powder technology, super duplex stainless steel grade Sandvik SAF 2507.

Typical applications are coil tubing High Pressure stack-up risers, work over and completion risers and hook-up of landing string to slick (case wear) joint, flow head and BOP in CT and WL operations.

SELECTED REFERENCES:When performing production well cleanup operation to a semi submersible drilling rig a landing string system is connected to the wellhead. Using traditional technol-ogy, the last connection of the landing string is made by rotating the assembly above the surface flow tree or use flange connection who is time consuming.

BP Norway at BP SKARV and Marathon Norway at ALVHEIM choose to use the Sandvik ClikLoc®. The cus-tomer’s concludes: “Overall we have been very pleased with the connector. It has certainly made connecting the surface flow tree assembly and above equipment much simpler and safer than other connection.”

The larges foreign operator in Norway continental shelf was looking for a safer and time saving alternative to the conventional rigging of coil tubing stack up risers. Conventional rigging of a 30-meter tall riser tower involves more than 900 potentially falling objects. One single bolt can weigh as much as 4 Kg.

By employing Sandvik ClikLoc® at Ekofisk X in the North Sea for well intervention, the oil company able to increase crew safety dramatically. Speedy rig up and rig down has minimized the time the well intervention riser tower has to occupy valuable time on the platform skid deck.

Other company using the Sandvik ClikLoc® is Baker Hughes, Shlumberger and Statoil



41


Siemens Oil & Gas Subsea Solutions

Contact person: Ordin HusaTitle: Head of Strategic Marketing and SalesE-mail address: [email protected] website: www.siemens.com/energy/subsea

Siemens Subsea is one of the leading providers of subsea power supply and distribution systems, including the solutions experience for configuring complex power transmission to multiple subsea consumers. Beyond power and distribution, our portfolio of subsea products and systems covers a broad spectrum of applications. Backed by extensive marinization expertise and a variety of exemplary life-cycle management and service support offers, Siemens provides answers at every phase of the development of the field.

SUBSEA PRODUCTS:Subsea products for customized solutions with a portfolio of market-leading brands such as Tronic, Matre and Bennex.

Tronic connector systems:Electrical and fiber-optic connector systems for subsea power and communications. Currently development of a 36kV 1000 Ampere wet mateable connector system.• DigiTRON: Subsea controls & distribution• SpecTRON: Subsea medium & high-voltage • FoeTRON: Wellhead feedthrough & subsea fiber-optics• ElecTRON: Wellhead instrumentation feedthrough

Matre sensors, transmitters and instruments for monitoring subsea operations conditions• Wellhead Pressure Sensors (WEPS)• Pressure Temperature (PT) sensors • Differential Pressure (DP) sensors for subsea

applications• Flow measurement

Bennex subsea power and signal distribution productsEquipment for power solutions, fiber-optic and seismic applications; electrical and optical subsea distribution systems; jumpers and cable terminations.• Anguila subsea distribution system• Anguila Advanced Cable Termination (ACT)• Anguila Advanced Fiber Termination (AFT)• Fiber-optic penetrator• Hydraulic/electric flying leads• High-Power Changeover Switch (HPCS)

• Anguila Cobra Head• Subsea Distribution Unit (SDU)

SUBSEA SYSTEMS:In response to the needs of the oil and gas industry, Siemens is delivering customized and fully marinized subsea power, control and surveillance systems that are key enablers for subsea processing on a large scale. • Power systems for pumps and compressors• Direct Electrical Heating (DEH) systems• Permanent Reservoir Monitoring (PRM)• Subsea Hydraulic Power Unit (SHPU)• Subsea Control Unit (SCU)

Siemens Subsea Power Grid: Powering installations on the seabed – down 3000 meters With the Subsea Power Grid, a supply and distribution system, we are combining our high R&D focus and broad subsea power concept experience with our extensive marinization expertise. Currently undergoing the detail design and test phase, it incorporates proven high-quality Siemens industrial components that include subsea transformers, switchgear and variable-speed drives.

LIFE CYCLE MANAGEMENT:Siemens is fully backing its subsea commitments by offering qualified service technicians and exemplary service and support. Our strong global presence with state-of-the-art facilities on four continents allows proximity to our customers and ensures that service needs are met locally.




Enabling Subsea Processing by Connecting Innovation with Experience

42

Subsea 7Contact person: Monica BjørkmannTitle: Sales & Marketing Director NorwayE-mail address: monica.bjoerkmann@Subsea 7.comCompany website: www.Subsea 7.com

Subsea 7 is a global leader in the provision of Subsea engineering, construction and services to the offshore energy industry worldwide. We have a proven track record, built up over 35 years, of safely and reliably executing and integrating projects of all sizes and complexity in all water depths.

Subsea 7 is recognised globally for strong projectmanage-ment, engineering and offshore execution. We provide a range of technical solutions and access to an unrivalled depth of expertise and operational capability. But we believe that the best way to support our clients is by having all of people, in excess of 14,000 globally, living our Values each day- they give us the foundation to build long, sustainable and trusted relationships.

Subsea 7 has a large and flexible fleet of 40+ vessels and ROVs to deliver the right solution locally and globally.

PRODUCTS AND SERVICES:We are experts in the Subsea design, fabrication, installa-tion and commissioning of seabed-to-surface projects.

With a strong focus on the subsea umbilical, riser and flowline (SURF) market globally, our extensive experience in major SURF, Life-of-Field, Conventional and Hook-up projects has made Subsea 7 a trusted partner with national and international energy companies.

Subsea 7 offers full end-to-end project management and construction capability, from engineering design to offshore execution, delivered as major engineering, procurement, installation and commissioning (EPIC), trans-port and installation (T&I) or on a day-rate reimbursable contract basis.

We offer a full range of services, capability and access to world-leading technology:





Services Capability Technology-EPIC contracting -Pipelay fabrication -Risers-Engineering design Rigid Single and Hybrid Towers-Project Management Bundle SCRs-Pipeline design, fabrication and -Pipelay installation BouysInstallation Rigid reel-ray Group SLORS-Life-of Field J-lay -Pipeline-Fabrication S-lay Pipe-in-pipe-Fleet provision Flex-lay Electrically Heat traced pipe- Bundle-lay in-pipe -Construction -Welding Fleet capacity and flexibility In-house R&D Lift and storage optimisation High strength steel -Remote intervention -Materials Diving High strength steel ROV Corrosion resistant alloys Autonomous (Bubi) -Heavy lift Composite Up to 5,000 te -Remote intervention AIV Sensors

TYPICAL CLIENTS: Continuous operations for all major operators as:Statoil BPShell ExxonTotal PetrobrasConnoco PhillipsGdF Suez DongMarathon British GasMaersk Hess

43



Technip in NorwayContact person: Tim CromeTitle: Director Sales and Business DevelopmentE-mail address: [email protected] website: www.technip.com

If energy were easy, there would be no need for a company like Technip. We work with our clients, today and tomorrow, wherever they are, to bring energy to the World. We will continue to con-tribute to their success through our constant customer focus and our integrated and sustainable project approach.

Technip’s mission is to deliver safe and successful energy projects across the World for the benefit of all our stakeholders. ‘Take it further’ is our approach to business, partnerships and aspirations. It conveys the unique message that Technip intends to excel in what we do, succeeding together, exceeding expectations and innovating continuously.

Within the domain of subsea hydrocarbon field develop-ment, Technip’s main focus area in Norway, our activities cover the design, manufacture and installation of rigid and flexible subsea pipelines and umbilicals. Technip is a key integrated player in this market thanks to our portfolio of state-of-the-art subsea pipe technologies and our industrial and operational assets.

Technip’s workforce in Norway comprises ~500 employ-ees out of ~25,000 worldwide, is split between the main office in Sandvika, near Oslo, and offices in Stavanger and Haugesund. Since the mid 1990s Technip in Norway has been playing a leading role in the development of subsea fields, including the infield transportation and flexible riser systems essential for the development and implementation of subsea and floating production facilities. The Technip spoolbase in Orkanger is special-ized in the welding of exotic pipeline materials and the fabrication of high specification pipelines, such as Pipe-in-pipe systems and HDPE lined water injection flowlines, and has delivered many hundreds of kilome-ters of infield flowlines for installation by reeling on the Norwegian Continental Shelf.

PRODUCTS:Rigid steel pipelines for installation by the reel method in sizes up to 16” OD (18” from 2013), with a unique track

record in the welding of exotic materials (13%Cr, Clad, Lined) and fabrication of highly insulated passive Pipe-in-Pipe systems and the newly developed Electrically Trace Heated (ETH-PIP) system.

Flexible flowlines and risers in sizes from 2” to 18” ID for design conditions matching water depths and oil and gas production profiles for the most severe subsea developments. Flexible manufacturing plants in France, Brazil and Malaysia.

Customized umbilical systems for subsea development projects, with manufacturing plants in Great Britain, United States of America, Angola and Malaysia.

SERVICES:EPCI Project Management services for Onshore, Offshore and Subsea projects.

Offshore construction with an extensive fleet of specialized vessels, including: Reel-lay vessels for rigid pipelines; Deep Blue, Apache II and Deep Energy (avail-able in 2013), Diving and Heavy Construction vessels; Skandi Arctic, Skandi Achiever, Deep Pioneer, Deep Constructor and Normand Pioneer and specialized Flexible installation vessels for the Brazilian market; Sunrise 2000, Skandi Nitteroi and Skandi Vitoria.

SELECTED REFERENCES:For references within any of the various fields of competence in Technip please check the internet site given above or contact the Director for Sales and Business Development for Technip in Norway at the email address stated.



44


Techno Dive ASContact person: Bjørn UtsethTitle: General ManagerE-mail address: [email protected] website: www.techno-dive.no

Your worldwide partner for safe- and efficient under water work.

PRODUCTS:Under water paint. Together with Lestin ag in Austria, we present the only functional under water epoxy paint, applied by our divers carrying brush and bucket under water. The product applied guarantee a strong adhesion and quality totally preventing corrosion for years. The product is tested by DNV GL and used both for sealing purposes as well as for preventing corrosion on semis, ships and quays worldwide.

SERVICES:Special Periodic Surveys (SPS), Underwater inspections,

Thruster replacement/work/change-outs, Structural repairs and upgrades (uw welding, sandblasting and painting), Anode replacement in wet or dry condi-tions, Blinding of valves and sea chests, Overhaul of valves, Hull cleaning and polishing, Pulling of Tail shaft, Underwater engineering, Equipment – Dry habitats

SELECTED REFERENCES:Techno Dive is approved by all major class societies as DNV GL, ABS, Bureau Veritas Norge and Lloyds.And we are approved supplier to Statoil, BP, Shell and rig owners Transocean, Noble, Seadrill, Dolphin etc.




45






Contact person: Stefan JohnsenTitle: Sales Manager SubseaE-mail address: [email protected] website: www.tess.noTESS as

TESS is Norway´s leading supplier of engineered systems and services for hoses and hydraulics for the OIL & Energy industry. TESS coordinates more than 100 service centers nationwide with approved workshops and Hose Engineers approved by DnV. TESS is also located in Scotland (Aberdeen), Denmark (Esbjerg) and Brazil (Macaé). TESS is recognized as a reliable supplier of high quality products and services for more than 40 years. 800 employees served a turnover of more than USD 333 Million in 2010.

PRODUCTS:Our experts and engineering staff are continuously improving our product range enabling TESS to meet the present and future demands. TESS is innovative, and cooperates directly with some of the world’s leading manufactures. TESS offers:• Hydraulic Flying Leads (HFL) and bundles• Subsea umbilical’s• Industrial and hydraulic hoses

SELECTED REFERENCES:• Statoil• FMC Technologies• Aker Solutions• Shell• Exxon Mobil• Schlumberger• Maersk

46





Contact person: Ingrid ThomasgårdTitle: Marketing CoordinatorE-mail address: [email protected] website: trelleborg.com/offshore-norway

Trelleborg Offshore Norway AS

Trelleborg Offshore Norway is a part of Trelleborg Offshore which has a global presence with many class leading manufacturing facilities around the world. We serve demanding industries within the offshore and defense sector in addition to general industry.

Since 1896 we have taken advantage of the well-known rubber properties to evolve the company from produc-ing footwear into supplying highly engineered products. Our competence has been reined into advanced polymer technology, serving the worldwide market with corrosion- and fire protection and thermal insulation together with molded products.

PRODUCTS AND SERVICES:Trelleborg Offshore Norway produces tailor made solu-tions in rubber for protection of other materials, against corrosion, fire, heat and wearing. Rubber also gives excel-lent performance as a construction material in vibration and shock dampening, in elimination of structural noise and is the ultimate material for sealing systems.

We are highly experienced in developing tailored solu-tions combining the highest level of performance and competitiveness and we are in constant contact with our

customers in order to define their particular require-ments. The innovation process is conducted on three levels:• Basic know-how in the physics and chemistry of

polymers• Experience and knowledge of polymers applications• Design of products including production an

installation

REFERENCES:• Thermal insulation/high temp to BPs Devenik project.• Thermal insulation to Statoils Åsgard Gas

Compression project• Thermal insulation to Excons Kizomba project• Thermal insulation to BPs Clair Ridge project• Thermal insulation to Totals Martin Linge project•

47

PROMOTING NORWEGIANOIL AND GAS CAPABILITIES

IN INTERNATIONAL MARKETSINTSOK, OSLOHoffsveien 23, 2nd floorP.O. Box 631 SkøyenNO-0214 OsloNorway

Phone: +47 22 06 14 80Fax: +47 22 06 14 90E-mail: [email protected]: www.intsok.com

INTSOK, STAVANGERProf. Olav Hanssens vei 7aP.O. Box 8034NO-4068 StavangerNorway

Phone: +47 51 87 48 80Fax: +47 51 87 48 81E-mail: [email protected]: www.intsok.com

INTSOK, BERGENSandslimarka 55N-5020 BergenNorway

Phone: +47 90 56 03 35E-mail: [email protected]: www.intsok.com

Documents

Services, equipment and systems for Subsea Umbilicals ... · PDF fileServices, equipment and systems for Subsea ... cables Subsea 7: ... Subsea 7: Installation Technip Norge: Installation