2
Welding sequence for panel opening Use FCAW welding process for minimum heatinput Alternatively use 2.5 dia electrode for SMAW process. Ensure no gap between tube to fin/shaped plate Always fit shaped plate at the centre of tube Adequate prehehat should be done to avoid shrinkage/distorti Always weld from center to outward direction to properly dis first and last tube of opening should be welded at last.

Seq

Embed Size (px)

Citation preview

Page 1: Seq

Welding sequence for panel opening

Use FCAW welding process for minimum heatinputAlternatively use 2.5 dia electrode for SMAW process.Ensure no gap between tube to fin/shaped plate Always fit shaped plate at the centre of tubeAdequate prehehat should be done to avoid shrinkage/distortionAlways weld from center to outward direction to properly dissipate heatfirst and last tube of opening should be welded at last.