Upload
zubairdar
View
220
Download
0
Embed Size (px)
Citation preview
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 1/21
Product Technical GuideJune 2010
Senior
®
Orifice Fitting Technical Guide
Differential Pressure Meters
Daniel ®
Senior Orifice Fitting
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 2/21
Product Technical GuideJune 2010
1
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 3/21
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 4/21
Product Technical GuideJune 2010
3
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 5/21
Product Technical GuideJune 2010
4
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 6/21
Product Technical GuideJune 2010
5
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 7/21
Product Technical GuideJune 2010
6
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 8/21
Product Technical GuideJune 2010
7
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 9/21
Product Technical GuideJune 2010
8
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 10/21
Product Technical GuideJune 2010
9
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 11/21
Product Technical GuideJune 2010
10
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 12/21
Product Technical GuideJune 2010
11
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 13/21
Product Technical GuideJune 2010
12
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 14/21
Product Technical GuideJune 2010
13
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 15/21
Product Technical GuideJune 2010
14
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 16/21
Product Technical GuideJune 2010
15
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 17/21
Product Technical GuideJune 2010
16
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 18/21
Product Technical GuideJune 2010
17
“SSR” SNAP SEAL RING*
“DSC” DUAL SEAL*The Daniel Dual Seal is the most simple and practical orifice plate sealingdevice for normal flowing streams. It is precision molded from 70-80 shorenitrile synthetic rubber** and provides four rubber-to-metal sealing surfaces360° around the plate. The units positively seal against both outer faces of theplate and against both seats of the orifice fitting to prevent leakage. In 1-1/2”to 10” sizes, the “DSC” is interchangeable with Daniel “TSC” and “MSC”seal units. In 12” sizes and up, the seal is bonded from 80-90 shore rubberdirectly to the outer edge of the orifice plate at the factory. If damaged, the“DVSC” seal and plate may be returned to the factory for revulcanizing. The“DSC” and “DVSC” seals are used in Daniel fittings sizes up to Daniel 600, intemperatures from -20°F to +275°F.
*US Patent # 5085250. **Also available in Viton.
The Daniel Snap Seal Ring is a removable orifice plate holder designed foruse in services where elastomer seal swelling is a problem. Certain media,such as ethylene or carbon dioxide may cause seal swelling when othertype seal units are removed from high-pressure service. The Snap Seal Ringunit consists of two symmetrical metal rings, each one having an O-ringon both sides for a positive seal on the plate side and the fitting side of thering. These rings center and secure the orifice plate between them. Theassembled unit provides a full 360° rubber-to-metal seal around both sides,
even in the absence of any pressure differential. No special tools are requiredfor assembly or disassembly. The Snap Seal Ring is designed for servicetemperatures ranging from -20°F to +275°F (standard a-rings) to -67”F to+437°F (Viton a-rings). It is available for line sizes of 2” through 16”. Whenordering, please specify nominal line size, schedule, plate thickness, andflowing media or material choice. The unit is available in 316 stainless steeland cadmiumplated carbon steel.
*US Patent # 4478251.
“DSC” in 2”-8”, “DS” in 10”
“SSRC” 2”-8”, “SSR” 10” and up
Orifice Plate Sealing Units
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 19/21
Product Technical GuideJune 2010
18
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 20/21
Product Technical GuideJune 2010
19
This page intentionally left blank
8/13/2019 Senior Orifice Fitting Tech Guide (2010)
http://slidepdf.com/reader/full/senior-orifice-fitting-tech-guide-2010 21/21
Daniel is a wholly owned subsidiary of Emerson Electric Co., and a division of Emerson
Process Management. The Daniel logo is a registered trademark of Daniel
Industri es, Inc. The Emerson logo is a registered trademark and service mark of Emerson
Electric Co. The contents of this publication are presented for in
formational purposes only, and while every effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, express or
implied, regarding the products or services described herein or their use or applicability. We
reserve the right to modify or improve the designs or specifications of
such products at any time. Daniel does not assume responsibility for the selection, use or
maintenance of any product. Responsibility for proper selection, use and
maintenance of any Daniel product remains solely with the purchaser and end-user.
Emerson Process Management
Daniel Measurement and Control, Inc.
www.daniel.com
North America / Latin America:Headquarters
USA - Houston, Texas
T +1.713.467.6000
F +1.713.827.3880
USA Toll Free 1.888.FLOW.001
Europe: Stirling, Scotland, UK
T +44.1786.433400
F +44.1786.433401
Middle East, Africa: Dubai, UAE
T +971.4.883.5235
F +971.4.883.5312
Asia Pacific: Singapore
T +65.6777.8211F +65.6770.8001