-
8/2/2019 Seminar Presentation -Flexible Manufacturing
1/8
NAME-RAHUL SOREN
ROLL NO.-BE/6225/08
BRANCH-PRODUCTION ENGINEERING
-
8/2/2019 Seminar Presentation -Flexible Manufacturing
2/8
INDUSTRIAL AUTOMATION
Industrial Automation is theuse of control systems and
information technologies toreduce the need for human
work in the production ofgoods and services.
In the scope ofindustrialization, automation
is a step beyondmechanization.
Industrial automation dealswith the optimization of
energy-efficient drive systemsby precise measurementand control
technologies.
-
8/2/2019 Seminar Presentation -Flexible Manufacturing
3/8
Mechatronics is the combination of Mechanicalengineering,
Electronic engineering, Computerengineering, Control engineering,
and Systems
Design engineering in order to design, andmanufacture useful
products.
Mechatronics is a multidisciplinary engineeringsystem design,
that is to say it rejects splitting
engineering into separate disciplines.
Mechatronics is an engineeringdiscipline which deals with
the
convergence of electrical,mechanical and manufacturing
systems.
MECHATRONICS
-
8/2/2019 Seminar Presentation -Flexible Manufacturing
4/8
FLEXIBLE MANUFACTURING SYSTEM
A flexible manufacturing system(FMS) is amanufacturing system in
which there is some amountof flexibility that allows the system to
react to changes,whether predicted or unpredicted.
An Industrial Flexible Manufacturing System (FMS)consists of
robots, Computer-controlled Machines,Numerical controlled machines
(CNC), instrumentationdevices, computers, sensors, and other stand
alone
systems such as inspection machines.
Flexibility
Machine
Flexibility
Routing Flexibility
-
8/2/2019 Seminar Presentation -Flexible Manufacturing
5/8
FACTORY AUTOMATION
Introduction of NC machining Centre and
transfer system in a manufacturing system
leads to factory automation.
NCMachining
center
TransferSystem
FactoryAutomation
-
8/2/2019 Seminar Presentation -Flexible Manufacturing
6/8
SENSORS
A Sensor is defined as a device that converts a physical
stimulus into areadable output.
By extracting information from the physical world , sensors
provideinputs to the control and automation systems.
The design of sensors is driven by performance features &
attributes:signal-to-noise ratio, reliability,
safety,accuracy,response time,dynamic range, cost, power
consumption, size, etc.
Sensors may be of many types, e.g.-magnetic, acoustic,
optical,etc.
-
8/2/2019 Seminar Presentation -Flexible Manufacturing
7/8
CONTROL SYSTEM A control system is a device, or set of devices
to
manage, command, direct or regulate thebehaviour of other
devices or system.
Control system includes sensors, actuators controller&
feedback control system. Supervisory Inputs
Simple Control System Actuation Command
Physical Effect Physical Effect
Sensor asTransducer
Controller
Actuator
System Under Control
-
8/2/2019 Seminar Presentation -Flexible Manufacturing
8/8
THANKYOU !
![Flexible Manufacturing Systems [F.M.S] · PDF fileFigure 2: - Block Diagram of a Flexible Manufacturing Cell (F.M.C.), Courtesy Flexible Manufacturing systems in Practice, Bonneto](https://img.pdfslide.us/doc/110x75/5a9e4e527f8b9a077e8b7393/flexible-manufacturing-systems-fms-2-block-diagram-of-a-flexible-manufacturing.jpg)
