Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Yasuko KuroiProduct Manager
International Sales & Marketing Dept.
Sekonic Product Line-up
L-208 L-398A L-308S L-308DC
Entry Level (Light Meter)
L-478D L-478DR L-358(Discontinued)
Middle Class (Light Meter)
L-758D L-758CINEL-758DR
High-End (Light Meter)
C-700 C-700R C-7000
Spectrometer (Color Meter)
i-346
Illuminometer
LITEMASTER PRO L-478 SERIES
Six Meters in One
Flash Meter (“R” = Radio Triggering)
Ambient Meter
Incident Meter
Reflected 5°Spot Meter w/attachment
HD_CINE/CINE Meter (Shutter Angles, f/s, Filter Compensation)
Illuminance/Luminance Meter(Lux, Cd/m2, Foot-candle, Foot-lambert)
L-478DR
L-478D
Advanced Features
Radio Triggering/Control Built-in (L-478DR series only)
Exposure ProfileMatch the exposure characteristic of DSLRRespond to the dynamic range of DSLR
Flash Analyzing Function
Memory Function
Custom Setting
Radio Triggering/Control Built-in(L-478DR series only)
Radio Triggering built-in
Flash Power Control
Modeling Lamp ON/OFF or Control
Programmable Light Meter Up to 10 Exposure Profiles can be
stored in the meter
Match the exposure characteristic of DSLR
Respond to the dynamic range of DSLR
Match the response of flash and ambient
light
For every ISO (ISO 3 to 409,600)
Set Clipping Point (user defined limit points)
Programmed using Data Transfer
Software
Set Exposure Profile
Custom Setting
Firmware Update via Internet
Pre-Exposure Warning
The Camera Profile is displayed on the analog scale when the Mid.Tone is set to:
EV scale Measurement scale (Aperture, Shutter Speed)
Indicators (arrows) change their color based on the stored profile compared to the measured values
- - - Within dynamic range/clipping point
- - - Out of clipping point
- - - Out of dynamic range
The analog scale shows the gap (in number of f-stops) between in and out of dynamic/clipping range
6
Flash/Ambient Analyzing
Measures ambient and flash
simultaneously
Measures ambient separate
from flash exposure.
Displays a ambient/flash ratio
using color bars
Measure and displays flash
separate from ambient
exposure
Provides percentage of flash in
the exposure
Ambient component
Flash component
100% flash 0% flash 50% flash
Enhanced Digital Video/Cine features
HD CINE mode T (shutter speed)Frame Rate (f/s)F (Aperture)Lx, CdM2, fc, fl displayISO
CINE modeT (shutter speed) ANG (shutter angle)Frame Rate (f/s)F (Aperture) Lx, CdM2, fc, fl displayISO
CINE Mode
HD CINE Mode
Enhanced Digital Video/Cine features
Select frame rate and shutter angle for your special effects and applications
Create your own frame rates and shutter angle (in Custom setting) if numbers are not in the original list
CINE Mode
Frame rate (f/s) Shutter angle
Enhanced Digital Video/Cine features
Luminance Mode
Candle / m2 (cd/m2)Foot-lambert (fl)(5 deg. viewfinder required)
Illuminance ModeLux (lx)Foot-candle (fc)
Additional DataIlluminance /Luminance displayed with exposure or independently
Enhanced Digital Video/Cine features
Filtration Compensation Mode
• Filter Compensation value can be entered directly• Filter Pack in Use can be stored (select up to four filters in use)• Custom filter factors and names can be created
Filter Compensation Setting Edit Filter Setting
Memory Clear and Recall
Up to 9 readings are stored
Review all stored values and
recall their measured f-stop
All or individual stored values
can be cleared
Custom Settings
13 settings can be customized, plus factory default setting
Select only those function you need or want
Spot Attachment
5° Spot attachment for reflected light measurementsFlash measuring range f 2.8 ~ f128.9Ambient measuring range EV 3.0 ~ EV 22.9Necessary for Exposure ProfilingNecessary for Landscape use
Retractable Lumisphere
Extended position (standard 3D subject – studio portraits)
Retracted position(for flat artwork, contrast and ratio, illuminance measurements)
What is Exposure Profiling?Each type of digital camera sensor has its own unique way of responding to various exposure conditions. These conditions often change the accuracy of the rate ISO and the dynamic range.
Right: Using a camera’s built-in meter or conventional hand-held light meter
Left: image was exposed using a programmed L-478DR with the Exposure Profile and Pre-Exposure Warning and balanced the flash light.
How do I Profile?1. Shoot the Test Target
<Compatible targets>
Sekonic Exposure Profile target
Sekonic Exposure Profile target
X-rite ColorChecker (Classic, Passport)
Exposure Profile Target Exposure Profile Target II X-Rite ColorChecker
How do I Profile?
2. Evaluate results in Data Transfer Software
Analyze the image
Automatically calculate the exposure profile
How do I Profile?3. Transfer the Profiles to Light Meter
Data Transfer Software
Creates Exposure Profile (calculates, stores and transfers the data to and from the L-478D/DR and the computer)
User upgradable firmware
Custom Settings Menu
Communicates with (MAC or Windows) computers via a USB cable
Yasuko [email protected]
www.sekonic.com