Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com

Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data.

Seem® 4 Drywall/Hard CeilingLED

DIMENSIONAL DATA FEATURES

PERFORMANCE

wall to ceiling companion

suspended companion

corner detail

regress lens trimless mud-in trim flange

Trimless mud-in, Flush lens Trimless mud-in, Regress lens5.53"

140.5mm

4.88

"12

4.0m

m

4.00"101.6mm

7.53"191.3mm

4.00"101.6mm

5.30"134.6mm

Trim flange

note: 0.375"min - 2.125"max ceiling thickness

Hard surface

note: 0.375"min - 2.125"max ceiling thickness

5.53"140.5mm

4.88

"12

4.0m

m

4.00"101.6mm

7.30"185.4mm

5.63"143.0mm

5.00

"12

7.0m

m

5.88

"15

0.0m

m

5.53"140.5mm

4.00"101.6mm

7.53"191.3mm

note: 0.375"min - 2.125"max ceiling thickness

May 2021 AR

Extruded aluminum 4" aperture recessed slot LED integrates with drywall or hard ceilings or walls in a variety of mounting styles for a clean, unobtrusive aesthetic.

Individual units and continuous runs in 1" increments.

Frosted acrylic lens provides uninterrupted illumination, without pixels or shadows.

LED position and lens material optimized to provide the perfect blend of high performance and visual comfort.

Preferred Light: Lighting for better color rendition and human preference.

PoE compatible: Integrates with Power over Ethernet lighting systems via standard, low-voltage wires.

grid celiing companion

perimeter companion

Flush Lens Batwing Lens Regressed Lens

Focal Point LLC reserves the right to change specifications for product improvement without notification.

fixture:

project:

DETAILS

ORDERINGLuminaire Series FSM4L

Seem 4 LED FSM4L

ShieldingBatwing Lens BW

Flush Satin Lens FLRegress Lens SR

(Ceiling applications only)

Regress High Performance Lens SRXP(Ceiling applications only)

Lumen Output275 Lumens per foot 275LF

(Not available with LH1.)

375 Lumens per foot 375LF(Not available with LH1.)

625 Lumens per foot 625LF(BW, FL & SR 3' minimum with LH1.

SRXP 4' minimum with LH1. Patterns not available with LH1.)

875 Lumens per foot 875LF(SR & SRXP 3' minimum with LH1.

SR & SRXP with LH1 not available on patterns.)1000 Lumens per foot 1000LF1125 Lumens per foot 1125LF1250 Lumens per foot 1250LF

Color Temperature2700K, 80+ CRI or 90+ CRI 27K or 927K3000K, 80+ CRI or 90+ CRI 30K or 930K3500K, 80+ CRI or 90+ CRI 35K or 935K4000K, 80+ CRI or 90+ CRI 40K or 940K

3500K, Preferred Light P35K(BW & FL Lens only. 6" increments. Patterns not available.)

Circuits & Zones1 Circuit, non-emergency 1C

Consult Ordering Guide on page 4 for multiple circuiting and zoning options _C_Z_DL

Voltage120/277 UNV Volt UNV

Low Voltage LV

Control System & Dimming Level0-10V - 10% Dimming LD1

0-10V - 1% Dimming L11Low Voltage, PoE compatible LVN

(No driver. Not available with EM or EC. LV Voltage only.)

Lutron Hi-Lume EcoSystem (LDE1) - 1% Dimming LH1

DALI 1% Dimming (1000LF max.) D11

Ceiling ConfigurationTrim Flange Drywall TF

(3' minimum with Lutron Drivers)Trim Flange Wood TFW

(3' minimum with Lutron Drivers)

Mud-in Trimless, pre-set for 1/2" Drywall XF1Mud-in Trimless, pre-set for 5/8" Drywall XF2

Mud-in Trimless, set thickness in field XFF(Mounting equipment assembled in field)

Non-Drywall Hard Surface XFNHard Surface, Wood XFW

Factory Options(See Ordering Guide on page 4 for

ordering details for DC, EC, EM & ECD.)

Chicago Plenum CP(Not available with Flex Whip)

Daylight Circuit _DCEmergency Circuit _EC

Emergency Battery Pack† _EMEmergency Control Device† _ECD

†(4' minimum. 6' minimum with patterns. 120/277 Volt only. Not available at corners.)

6' New York City Flex Whip (120V) FNY16' New York City Flex Whip (277V) FNY2

6' Flex Whip FW

Finish WHMatte White Housing WH

Luminaire Length ft inSpecify luminaire/row length in 1" increments

_ft _in

(2' minimum, lengths are nominal 1" increments based on T-centers. Housing length is 1" shorter than specified. Leave blank for patterns.

Smaller increments available, consult factory.)

Pattern Options(4' minimum length)

‘L’ pattern A' x B'‘U’ pattern A' x B' x C'

Rectangular pattern A' x B' R(Consult factory for other pattern options)

SPECIFICATIONSLED SystemProprietary linear LED module incorporates premium LEDs on a robust platform to achieve excel-lent thermal management. LEDs are placed to promote a uniform appearance. Available in 2700K, 3000K, 3500K or 4000K with CRI>80 or CRI>90, 3 SDCM. 3500K and 4000K with CRI>90 have a cyanosis observation index (COI) of 3.3 or less. LED modules and drivers are replaceable from below.

ConstructionOne piece extruded aluminum housing. 20 Ga. steel end caps. Housing for new construction applications. XFW acceptable for use with wood, consult factory for Type IC availability. 2' unit weight: 12 lbs., 3' unit weight: 16 lbs., 4' unit weight: 20 lbs., 5' unit weight: 24 lbs.

OpticReflectors fabricated of 22 Ga. steel finished in High Reflectance White powder coat. Extruded acrylic lens .085" thick with satin finish, up to 8' continuous.

ElectricalLuminaires are pre–wired with factory installed branch circuit wiring and over-molded quick connects. Standard 120-277V constant current driver includes 0-10V analog dimming. Power factor >.9. PoE compatible: Integrates with Power over Ethernet lighting systems via standard, low-voltage wires. PoE runs require an independent PoE node and power feed for each luminaire section.

EmergencyOutput - 10 watts for 90 minutes. Maximum mounting height: 19.2ft.

LabelsUL and cUL listed. Suitable for Dry or Damp Locations, indoor use only.

FinishPolyester powder coat applied over a multi-stage pre–treatment.

Lumen MaintenanceReported: L70 > 61,000 hours Calculated: L70 at > 480,000 hours L90 > 61,000 hours L90 at > 128,000 hours (Derived from EPA T M-21 calculator. Based on typical conditions, consult factory for additional data.)

ReliabilityAt Focal Point, our products are designed to stand the test of time. Each luminaire is engineered using superior components, manufactured with the utmost care and rigorously tested. Contact us for reliability data.

WarrantyLED system rated for operation in ambient environments up to 25°C. 5-year limited warranty.

4' PERFORMANCE CHART See page 3.

Standard Patterns with 90˚ Corners

Overall Length‘B’

Ove

rall

Len

gth

‘A’

start

start

start

start

start

Ordering examples assume A=8’, B=6’ & C=4’

Specify clockwise from start of run.

Start of run is always at �rst speci�ed run length.

Order: 8’x6’

‘L’ Patterns - A’xB’

Order: 6’x8’

Overall Length‘B’

Ove

rall

Len

gth

‘A’

Order: 8’x6’x4’

‘U’ Patterns - A’xB’xC’

Overall L

ength

‘C’

Ove

rall

Len

gth

‘C’

‘B’Overall Length

Overall L

ength‘A

’

Order: 8’x6’x4’

Overall Length‘B’

Ove

rall

Len

gth

‘A’

Order: 8’x6’R

Rectangular Patterns - A’xB’R

‘A’Overall Length

Ove

rall

Len

gth

‘B’

Housing Length Details1" increments are based on T-centers. Housing is 1" shorter than speci�ed length.

8'-4"

8'-5" examplesTrim Flange X = 0.625"Mud-in length X = 1.75", Cutout = 8'-5.0"Hard Surface X = n/a

X X

10 DAY Options in orange qualify for the Quickship program. 1000' total, 48' maximum per pattern section. Refer to Quickship Guide for complete details including EM/EC options.

4' PERFORMANCE CHART

LPW

Lumens Output

Delivered Lumens

Tested System Watts BW FL

275 1100 10 104 100375 1500 13 113 108625 2500 22 112 107875 3500 32 109 1051000 4000 37 109 1041125 4500 44 108 1041250 5000 49 107 102

Based on 3500K, 80 CRI, 4' lengths. Lumen multipliers: Preferred Light = 0.65, 90+ CRI = 0.87. Lumen output may vary +/- 5%. Actual wattage may vary +/- 5%.

4' PERFORMANCE CHART - REGRESS

LPW

Lumens Output

Delivered Lumens

Tested System Watts SR SRXP

275 1100 12 79 98375 1500 16 84 109625 2500 26 84 110875 3500 39 80 1051000 4000 46 77 1011125 4500 53 76 1011250 5000 59 75 99

Based on 3500K, 80 CRI, 4' lengths. Lumen multipliers: Preferred Light = 0.65, 90+ CRI = 0.87. Lumen output may vary +/- 5%. Actual wattage may vary +/- 5%.

Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com April 2021 E

HOW TO USE THIS GUIDE

Fill out the worksheet on the following page to specify your requirements for circuitry, zones, and factory options.

Refer to the run chart for standard run configurations, consult factory for custom configurations.

Complete the Totals / Ordering Codes at the bottom of the worksheet and add to your ordering logic on the cut sheet.

Submit the worksheet along with your order.

ORDERING: FSM4L-FL-625LF-35K- 2C2Z -UNV-LD1-G2- 1DC-1EM -WH-32ft

Section 1 Section 2 Section 3 Section 4

2C 1DC1C

EM BATTERY

2Z1Z

DEFAULTS

• Zones and Factory Options illuminate entire sections from 4' to 8' in length.

• One shared or isolated circuit and zone required per housing section.

• Limit of one EM or ECD per housing section.

• Additional electrical feed required for applications greater than three shared circuits and zones.

• Each DC, EC and ECD require an additional electrical feed.

• ECD not available in the same housing section as EC.

• Longer lead times and additional pricing may apply for custom run configurations.

CUSTOM LENGTHS

• If partial illumination of emergency or daylight section is required, indicate in ordering guide and add "partial illumination" in Order Notes. Drawing required.

• Engineering validation required, longer lead times may apply.

EXAM

PLE

TOTAL RUN LENGTH: 32ft JOB NAME: FIXTURE TYPE:

HOUSING SECTION

SECTION LENGTH

SHARED ELECTRICAL FEED, NORMAL POWER

FACTORY OPTIONS

SEPARATE ELECTRICAL FEEDSEMSWITCHING

CIRCUITDIMMING

ZONEDAYLIGHT

ZONEDAYLIGHT CIRCUIT

EMERGENCY CIRCUIT ECD

1 8 1C 1Z 1EM

2 8 2C 2Z

3 8 2C 2Z

4 8 1DC

Totals / Ordering Codes 2C 2Z 1DC 1EM

KEY

C = Switching Circuit Switched Hot / Shared Neutral

DC = Daylight Circuit Switched Hot / Separate Neutral

Z = Dimming Zone Dimming Control Wires

EC = Emergency Circuit Switched Hot / Separate Neutral

DL = Daylight Zone Daylight Dimming Control Wires

EM = Emergency Battery Unswitched Hot / Shared Neutral

ECD = Emergency Control Device Unswitched Hot / Separate Neutral

Ordering Guide Linear Circuitry, Zones & Factory Options

Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com April 2021 E

Run length(ft)

Housing Configuration Section Lengths

Run length(ft)

Housing Configuration Section Lengths

Run length(ft)

Housing Configuration Section Lengths

Run length(ft)

Housing Configuration Section Lengths

9 5 + 4 21 8 + 8 + 5 33 8 + 8 + 8 + 5 + 4 45 8 + 8 + 8 + 8 + 8 + 5

10 6 + 4 22 8 + 8 + 6 34 8 + 8 + 8 + 6 + 4 46 8 + 8 + 8 + 8 + 8 + 6

11 7 + 4 23 8 + 8 + 7 35 8 + 8 + 8 + 7 + 4 47 8 + 8 + 8 + 8 + 8 + 7

12 8 + 4 24 8 + 8 + 8 36 8 + 8 + 8 + 8 + 4 48 8 + 8 + 8 + 8 + 8 + 8

13 8 + 5 25 8 + 8 + 5 + 4 37 8 + 8 + 8 + 8 + 5

14 8 + 6 26 8 + 8 + 6 + 4 38 8 + 8 + 8 + 8 + 6

15 8 + 7 27 8 + 8 + 7 + 4 39 8 + 8 + 8 + 8 + 7

16 8 + 8 28 8 + 8 + 8 + 4 40 8 + 8 + 8 + 8 + 8

17 8 + 5 + 4 29 8 + 8 + 8 + 5 41 8 + 8 + 8 + 8 + 5 + 4

18 8 + 6 + 4 30 8 + 8 + 8 + 6 42 8 + 8 + 8 + 8 + 6 + 4

19 8 + 7 + 4 31 8 + 8 + 8 + 7 43 8 + 8 + 8 + 8 + 7 + 4

20 8 + 8 + 4 32 8 + 8 + 8 + 8 44 8 + 8 + 8 + 8 + 8 + 4Standard run configurations, consult factory for custom configurations.

RUN CHART

WO

RKSHEET

TOTAL RUN LENGTH: JOB NAME: _______ FIXTURE TYPE:

HOUSING SECTION

SECTION LENGTH

SHARED ELECTRICAL FEED, NORMAL POWER

FACTORY OPTIONS

SEPARATE ELECTRICAL FEEDSEMSWITCHING

CIRCUITDIMMING

ZONEDAYLIGHT

ZONEDAYLIGHT CIRCUIT

EMERGENCY CIRCUIT ECD

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Totals / Ordering Codes

Combine to create Circuits & Zones ordering code Enter as individual Factory Options

Ordering Guide Worksheet Linear Circuitry, Zones & Factory Options