Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867-2312 ● Fax (814) 867-2314

Secure Convenient

AestheticWireless AP and Telecom Enclosures

See our full line at oberonwireless.comOberon’s impact-resistant ABS plastic doors are virtually transparent to wireless signals.

Wireless Access Point Mounting Solutions for Healthcare Environments

In Healthcare, The Joint Commission on Hospital Accreditation has established procedures for mitigating the spread of infectious disease and contamination. Infection control risk assessment (ICRA) will have a serious impact on cabling installation, moves, adds, and changes.

Oberon enclosures provide access to ceiling-mounted wireless LAN access points and telecom equipment without entering the air-handling “plenum” space, simplifying compliance with ICRA guidelines. In addition to providing added safety, convenience, and the security of a locked door, Oberon enclosures also help installations meet the National Electric Code (N.E.C.) article 300.22 and 300.23 requirements for installing unlisted equipment above a suspended ceiling.

Healthcare environments must anticipate rapid growth in wireless and wired infrastructure. Oberon’s telecom and wireless enclosures can simplify structured cabling growth, moves, adds, and changes.

Simplify ICRA procedures Protect patients Add security and convenience

1328 Charwood Rd., Suite 600Hanover, MD 21076-3113Phone: (410) 694-9621Toll Free: (800) 490-4580www.Accu-Tech.com

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867-2312 ● Fax (814) 867-2314●

Wireless AP and Telecom Enclosures

Plenum-Rated Ceiling Enclosures

1328 Charwood Rd., Suite 600Hanover, MD 21076-3113Phone: (410) 694-9621Toll Free: (800) 490-4580www.Accu-Tech.com

Specifications:● UL listed and designed to meet NEC300-22 and 300-23 for installations in the air handling space, OSHPD approved OPA # 1638● Fully hinged locking door, keyed alike. Door can be replaced to migrate to new access points.● Construction: Textured white powder-coated steel, 16 ga. backbox, 14 ga. door● Size: Flange is 24” x 24”, AP Enclosure is 12½ “ x 12½ “ x 4½ “● Weight: 13lbs (not including access point or antenna)● Enclosure must be supported by the building ceiling structural system, not tile gridwork.Includes:● Access point mounting screws● (4) Suspension wires● (2) ¾ “ Trade conduit connectors for power and data cable openings in the back-box● Installation Instructions

The Model 1052-00 wireless LAN access point enclosure is a locking 2 foot x 2 foot ceiling tile enclosure designed specifically for the Cisco 1232/1242/1260/3500e/3600e and many Aruba Networks access points. The enclosure accommodates many other manufacturers access points with Oberon’s optional universal mounting plate. This aesthetic, white powder-coated steel enclosure has openings in the door for up to six antennas. No ceiling tile cuts are required for installation.

Model

1052-00

The Model 1052-CCOANT wireless LAN access point enclosure is a locking 2 foot by 2 foot ceiling tile enclosure designed specifically for the Cisco 1260, 3500e, and 3600e series wireless access point. This aesthetic, white powder-coated steel enclosure has mounting features in the door for installation of the Cisco 802.11n antennas, simplifying installation & optimizing wireless coverage. No ceiling tile cuts are required for installation.

Model

1052-CCOANT

Model 1052-ENT3610 wireless LAN access point enclosure is a locking, 2 foot by 2 foot ceiling tile enclosure designed to conveniently mount and secure the Enterasys AP3605, AP3610, and AP3630 series wireless access points. The enclosure is based on Oberon’s popular 1052-00 universal wireless AP enclosure, with a door designed specifically for the newest Enterasys access points. No ceiling tile cuts are required for installation.

Model

1052-ENT3610

The Model 1052-AN-ANT16 wireless LAN access point enclosure is a locking, 2 foot by 2 foot ceiling tile enclosure designed specifically for the Aruba Networks access points with detachable antennas (AP-60, AP-70, AP-120, AP-124). This aesthetic, white powder coated steel enclosure has mounting features in the door for installation of the Aruba Networks AP-ANT-16 antenna, simplifying installation & optimizing wireless coverage. No ceiling tile cuts are required for installation.

Model

1052-AN-ANT16

Model 1052-CCOAP wireless LAN access point enclosure is a locking, 2 foot by 2 foot ceiling tile enclosure designed specifically to conveniently mount and secure the Cisco 1040/1140/1260/3500/3600 series access points. The enclosure is based on Oberon’s popu-lar 1052-00 universal wireless access point enclosure, with a door designed specifically for Cisco’s newest access points. No ceiling tile cuts are required for installation.

Model

1052-CCOAP

Model 1064-00 wireless access point ceiling mount is designed to provide a secure, convenient, and aesthetic mounting solution for the Cisco 1040/1140/1260/3500/3600 series 802.11n access points. This aesthetic, white powder-coated steel 2 foot by 2 foot ceiling tile-like mount locks the access point in place with a patent pending locking mechanism. Access point moves, adds, and changes can be performed without removing the mount from the ceiling. No ceiling tile cuts are required for installation.

Model

1064-00

The Model 1059-00 wireless LAN access point enclosure is a locking, 2 foot by 2 foot ceiling tile enclosure designed to accommodate access points with non-detachable antennas from most manufacturers. This aesthetic, white powder-coated steel enclosure has an impact-resistant, RF-transparent door, which protrudes only 4 inches below the ceiling plane. No ceiling tile cuts are required for installation.

Model

1059-00

Oberon’s Model 1030-00 “hard lid” or wall mount enclosure provides a secure, aesthetic, convenient mounting solution for wire-less access points from most vendors. The enclosure has a low profile impact-resistant ABS dome so that wireless access points with integrated or non-detachable antennas can be secured in otherwise unsecured spaces. The product is designed to satisfy National Electric Code (NEC) paragraphs 300-22 and 300-23 for installation in the air handling space. Locks are “keyed-alike” to simplify moves, adds, and changes. An optional suspended ceiling flange kit permits the Model 1030-00 to be mounted in a standard 2 foot by 2 foot suspended ceiling system.

Model

1030-00

The Model 1026-00 is a compact NEMA enclosure designed to protect wireless LAN access points from most vendors in challenging indoor/outdoor environments, such as stadiums. This rugged polycarbonate enclosure protects the access point from weather, dust, and impacts. It is transparent to wireless signals, so access points with body integrated antennas or small detachable antennas may be protected. The enclosure has a fully hinged cover, molded in padlock hasps for locking, & interior mounting plate for attaching access points. Enclosures with clear covers are available.

Model

1026-00

Oberon’s Model 1032-00 “hard lid” or wall mount enclosure provides a secure, aesthetic, convenient mounting solution for smaller wireless access points from many vendors. This economical enclosure has a low profile impact-resistant ABS dome so that wireless access points with integrated or non-detachable antennas can be secured in otherwise “unsecured” spaces. The product is designed to provide an unobtrusive mounting solution. Locks are “keyed-alike” to simplify moves, adds, and changes.

Model

1032-00