Seco tools

SECOMAX PCBN FOR TURNING CASE HARDENED STEEL

3ANSWERING THE ISSUES FOR CASE HARDENED STEEL

LIGHTER, STRONGER, TOUGHER

Industrys never ending quest for new and better materials, improvements in quality, and more durable products all place increased demands on cutting tool technology and materials. Seco prides itself in innovation in tooling and processes through knowledge driven solutions and a complete program of low cBN content inserts for machining Case Hardened Steel. With six Secomax grades, including the latest coated CBN160C, this range of grades covers the spectrum of Case Hardened Steels in the 45-65 HRc area.

HARD TURNING vs. GRINDING: YOU WIN

As our PCBN technology continues to advance, the machining envelop has swollen to consume what previously required secondary operations, namely grinding. This is due primarily to the high surface fi nishes possible across a broad range of lathe operations. The results are numerous and, together, amount to a signifi cant impact on your business. Greater fl exibility in your processes; lower energy costs; reduced capital equipment investment; less outsourcing; reduced tool inventories; reduced environmental effect due to dry-machining; easier manufacturing processes; and increased overall productivity are all byproducts of a key change such as switching to PCBN.

COMPLEMENTING THESE GRADES

There are numerous choices of formats and styles, as well as wiper inserts, including two new patented twisted wiper geometries that improve productitivity and work-piece quality. Most case hardened steels are used in industries such as automotive where limited or unmanned, high volume production of parts is commonplace. The manufacture of gears, shafts, bushings, clutch sleeves and CV joints are typical examples. Similar parts made by defense, agriculture and machine tool fabricators represent other major sources of Case Hardened Steel machining. It is essential that these parts remain accurate, tough, resilient and low in cost Thats where we can help most.

4PCBN -POLYCRYSTALLINE CUBIC BORON NITRIDE

.or more simply cBN, is a sintered cutting tool material formed under ultra high pressure and temperature resulting in a wear resistant compos-ite with properties very close to diamond. Secomax is a comprehensive and expanding family of PCBN inserts formulated, and specifi cally developed, for the type of material being

machined. We are concentrating on a range of grades in low cBN content inserts for machining Case Hardened Steel to make sure our customers can provide components to their custom-ers that refl ect the highest quality and lowest possible production costs. Our efforts have focused on expanding industrys choices for machining the various Case Hard-ened Steel components, says Eilert Kautto, Product Manager, PCBN, With the introduction of the coated CBN160C, for secured interrupted machining, we can offer higher

durability making it possible for our customers to enjoy longer tool life, less indexing and fewer setups even with severely interrupted machining, Kautto continues.

INNOVATIVE TOOLING FOR THE NEXT LEVEL OF PRODUCTIVITY

Today, Seco is the only cutting tool manufacturer to offer solid PCBN inserts in the low cBN content area. This provides our customers with a signifi cant opportunity for produc-tivity by using the entire cutting edge length with capability for plunge turning. Additionally, it provides compared to brazed inserts, a very cost effective machining solution by offering the maximum number of cutting edges per insert. We will also continue to develop other tooling and machining processes, notes Anders Wickman, Product Specialist PCBN. Such developments include wiper inserts for high feed applications, and a range of insert geometries including Multi-Directional Turning (MDT) tooling for reduced tool changes and plunge turning.

WHY SECOMAX?

6A SOPHISTICATED, YET SIMPLIFIED RANGE OF LOW-CONTENT PCBN

Not all Case Hardened Steel is the same. Although it has been with us since the beginning of the Industrial Revolution, depth and hardness vary according to part specifi cations. There are six members in the low cBN content family, three coated and three uncoated, designed to meet the requirements of various applications and operations, such as work piece shapes, interruptions and severity of machining.

LOWER PRODUCTION COSTS WITH CBN160C

CBN160C has been designed, developed and tested to fi ll industrys ever increasing demands for lower production costs. Our unique (Ti,Si)N coating, designated C, signifi cantly improves wear resistance, increases tool life and enables higher speeds and feeds. Our process provides a crack-resistant coating and grain structure with a low coeffi cient of friction and sharper cutting edges. This coating is bonded to a specifi c balance between substrate (cBN content, grain size, binder) and edge micro geometry making this grade very well suited to heavy interrupted and high speed machining.

CBN160C A NEW INDUSTRY STANDARD

The predominant failure conditions of PCBN cutting tool inserts, when used in interrupted machining, is thermal cracking, followed by

erosion around the cracks and eventual edge chipping. CBN160C is highly resistant to thermal cracking and thus

premature failure or shortened life. Our results show that parts per edge are more than doubled compared to compe-

tition in applications such as facing pinion gears; facing and ID turning of ring gears; good examples of heavy

interrupted cutting. This grade in combination with our (Ti,Si)N coating is specifi cally developed for dry machining pre-hardened steels, such as Case Hard-ened Steel in the 45 to 65 HRc range. We look for CBN160C to become an industry standard.

CBN160C: BUILT FOR HEAVY INTERRUPTIONS AND SPEED

8COATED

CBN050C

PVD coated with (Ti,Si)N for durability and wear indication Brazed, full face and solid formats New Helix wiper geometries available High feed / High speed and plunging High speed continuous machining Good light interupted cut performance

CBN160C

PVD coated with (Ti,Si)N for durability and wear indication Brazed and full face formats Withstands severe interruptions High feed / High speed

CBN100P

PVD coated with Ti(Al)+TiN Solid formats Continuous and light interrupted cuts

UNCOATED

CBN10

Brazed and full face formats Continuous and light interrupted cuts Threading, grooving and groove turning

CBN100

Solid formats Continuous and light interrupted cuts Plunging Crossbill wiper geometry

CBN150

Brazed and full face formats Preferred for interrupted cuts

GRADES AND FORMATS

9FORMATS FOR MAX EFFICIENCY

A complete variety of formats is available to suit both your application and your budget. Coated and uncoated grades are available in single brazed-tipped formats for continuous and interrupted turning and offer users a lower insert investment. Also, multiple brazed corner inserts provide the same performance as single tip inserts, but with reduce cost per edge and quicker indexing to the next corner to maximize your machine uptime. Seco offers full face PCBN with full length cutting edges for e.g. plunging operations. Included are versions with C-lock for rigidity in processes where less than optimal set ups are common. Full face is avail-able in several grades to match the need for increasing speeds. They are also easy to index. Solids and solids with pin lock hole for rigidity are also available in several grades which are ideal for plunge turning and are the most cost effective inserts for high production, achieving the maximum number of cutting edges per insert.

STYLES WELL-SUITED FOR YOUR PLANT FLOOR

Along with the several formats, this new family comes in all the normally used styles, including Square, Triangle, the three Diamonds C 80, V 35 and D 55 - as well as Trigon (W), round and a range of inserts for our unique MDT system.

CHOICES TO PLEASE BOTH OPERATOR AND ACCOUNTANT

FORMATS

BRAZED FULL FACE SOLID

Single tipped Economical choice for lower parts

volumes Stable set up Available in grades CBN10 and

CBN050C

Multi Corner Economical choice for moderate parts

volumes Ease of set up and indexing Available in grades CBN10, CBN050C,

CBN150 and CBN160C

MDT Multi Directional Turning Complex part profi le, single tool

multitask Available in grade CBN10

Full face Full length cutting edge for plunging Available in grades CBN10, CBN050C,

CBN150 and CBN160C

Full face / C-lock Rigidity in process Multiple cutting edges Positive geometries for reduced

cutting forces Standard toolholders can be used Available in grade CBN10

Solid Plunge Turning Most cost effective for high production Available in grades CBN050C and

CBN100

Solid with hole Rigid set up required Available in grades CBN050C and

CBN100

10

Many factors infl uence surface fi nish, however, the two most important ones are feed rate and the size of the corner radius. The introduction of the new Helix wiper technology has increased our ability to turn up the feed rates while maintaining a superior fi nish. Reduced machining time is the name of the game in keeping produc-tion costs lower. Seco wiper inserts combine the high feed capacity and high quality surface fi nish given by larger round inserts and the low cutting forces and fl exibility permitted by pointed inserts. By combining the high speed capabilities of grades such as CBN050C, with wiper geometries, you have the potential to increase cutting speed and feed rates that contribute signifi cantly to the goals of reduced cycle times and high productivity machining.

HIGH FEED MACHINING

12

Our unique patented, Helix wiper concept is designed for optimization in fi nish machining. It has a wiper on both sides of the corner radii (as the standard) but the protection chamfer is twisted from negative to positive or from positive to negative depending on the application. It is available in grade CBN050C. The following considerations apply when selecting the appropriate geometry:

POSITIVE WIPER, WZP

Reducing vibrations in weak setups Lower radial cutting forces Used where standard wiper cannot be used

NEGATIVE WIPER, WZN

Longer tool life Reducing vibrations in stable setups Increasing compressive stresses

THE HELIX WIPER TECHNOLOGY

Wiper section

Big angle

Small angle

Wiper section

Small angle

Big angle

Helix Negative

Wiper

CompetitorPCBN

Tool life (parts/edge)Tool life (parts/edge)

Helix Positive Wiper

Std. Wiper

13

The standard wiper geometry has wiper edges on both sides of the corner radii, in a standard chamfer 0.1mm x 20 deg. It is used in general applications, machining in two directions with full wiper effective-ness, e.g. OD/ID turning and facing. It is available in grades CBN10, CBN050C, CBN100 and CBN160C.

STANDARD WIPERS

Wiper segment

Wiper segment

Right hand version

Crossbill is available in grade CBN100 in both right and left handed geometry designs. It offers great fl exibility in that it can machine all the way to a shoulder, making it possible to machine a perfect radius with no deviation from the components normal corner radius shape. This wiper also has a standard chamfer (0.10mm x 20 deg) and is used in general machining operations.

CROSSBILL WIPER

14

PLUNGING - A NEW APPROACH TO MODERN MACHNING

Because the pressure is so heavy for our customers to reduce cycle times, we decided to take the plunge. Plunge turning, that is. Accomplished with solid and full face inserts such as CBN050C, CBN100 and CBN10. With plunge turning, production costs are signifi cantly reduced through shorter machining time (as much as 90% shorter). The results are a dramatic increase in the number of machined surfaces per cutting edge. Studies have shown PCBN, when used in plunge turning processes, can be 10 to 300 times more effective in terms of overall productivity when compared to conventional turning methods. And, plunge turned parts exhibit lower residual stresses with the sealing properties equal to or better than ground surfaces.

T-STYLE PLUNGING

A breakthrough has been achieved in plunge turning with Secomax CBN100 and CBN050C. Using solid triangular, T style, PCBN inserts with superior cutting edges and good rigidity, the two great advantages of plunge turning, i.e., reduced cutting time (as much as 90%) and improved surface integrity can be achieved. Plunge turning also lowers residual stress in the axial direction, distributing it in the tangential direction instead, which is a benefi t when compared to a ground surface. All of this translates into longer tool life, lower production costs and higher workpiece quality money saving solutions from Seco.

MULTI DIRECTIONAL TURNING (MDT)

A combination that is hard to beat grinding quality and toolholder stability both from Seco Tools. Multi Directional Turning (MDT) is an innovative technique where a single tool can be used for multiple processes. Almost anything in machining is possible with Secomax MDT: side turning, face turning, internal machining; plunging, grooving and even parting-off. MDT is really a system made up of a unique PCBN insert mated to its own toolholder by a patented series of serrations called Secoloc. Commonly used insert styles meeting ISO standards are not always suit-able for machining grooves, so in order to machine all surfaces, groove turning inserts are necessary. MDT not only eliminates the need for separate inserts but it also provides the accuracy in positioning and the rigidity required in groov-ing, turning in both directions and for plunging as well. The edge quality and selected Secomax PCBN grades guarantee excellent surface fi nish and long tool life.

16

PINION GEAR SHAFT

Material DIN 16MnCrS5

Surface Pre-machined

Operation Facing; D 60

Grade CBN160C

Insert DNGA150608S-01525-L1-B

Toolholder C5-DCLNL35060-12

Cutting data vc 140 m/min

fz 0,14 mm/rev

ap 0,30/0,15/0,01 (3 cuts)

Coolant No

Tool life Competitor performs 80 parts/edgeCutting time: 0,27 min/part; cutting length: 40mm/partTool life CBN 160C ~ 160 parts

RING GEAR

Material DIN 16MnCrS5

Surface Pre-machined

Operation ID turning; D125

Grade CBN160C

Insert CNGA120412S-01525-L1-B

Toolholder C5-DCLNL35060-12 - Facing / ID turning

Cutting data vc 95 m/min / 160 m/min

fz 0,25 mm / 0,23 mm

ap 0,20 / 0,20

Coolant No

Tool life Competitor performs 130 parts/edge, Cutting time (facing): 0,40 min/part; Cutting length: 20 mm/ part , Cutting time (ID turng): 0.40 min/part; Cutting length: 20 mm/ part Tool life CBN160C ~ 230 parts/edge

TEST RESULTS

Tool life (parts/edge)

CBN160C

Competitor

Tool life (parts/edge)

CBN160C

Competitor

PINION GEAR SHAFT

Material DIN 16 MnCr5

Surface Pre-machined, hardened to 60 HRc

Operation OD turning / facing

Grade CBN050C

Insert DNGA150612S -L1-WZN (Wiper)

Toolholder Special


fz 0,25 mm/rev

ap 0,15 mm

Coolant No

Tool life 6 times higher tool life compared to the competitor.

CLUTCH CYLINDER

Material Case hardened steel

Surface 55 to 60 HRc

Operation OD Continues cut

Grade CBN050C

Insert CNGA120408S-L1-WZP (Wiper)

Toolholder Special


fz 0,08 mm/rev (std wiper) 0,20 mm/rev (sharp wiper)

ap 0,15 mm

Coolant yes

Tool life 2,5 times faster and more than double tool life

Helix Negative Wiper

CompetitorPCBN

Tool life (parts/edge)Tool life (parts/edge)

Helix Positive Wiper

Std. Wiper

17

GEAR SHAFT


Surface 58 HRc Forged

Operation Continuous turning

Grade CBN050C

Insert TNGX110304S-WZ (Wiper)

Toolholder Special


fz 0,3 mm/rev

ap 0,1 mm

Coolant No

Tool life Cycle time reduced by 50% compared to grinding. Machined in one set up.

Grinding

Machining time (%)

CBN050Cwiper

CONSTANT VELOCITY JOINT



Operation Turning

Grade CBN100


Toolholder Special


fz 0,15 mm/rev

ap 0,15 mm

Coolant No

Tool life CBN100 = Wiper geometry improves productivity. Cycle time reduced by 4050% compared with grinding.

Grinding

CBN100wiper

Cycle time (%)

SYNCROMESH GEARS



Operation Plunging the taper

Grade CBN100

Insert TNGN110304E

Toolholder Special


fz 0,04 mm/rev

ap 0,15 mm

Coolant No

Tool life CBN100, plunging = 0,18 sec. machining time.Comp. PCBN Conventional = 6,9 sec. machining time.

Comp. PCBNConventional

CBN100plunging

Machining time (sec.)

GEAR WHEELS


Surface 5863 HRc Forged 1,5 microns Rz

Operation Boring

Grade CBN050C


Toolholder Special


fz 0,15 mm/rev

ap 0,05 mm

Coolant No

Tool life CBN Wiper = 0,15 mm/rev Comp. PCBN Conventional = 0,05 mm/rev. Same tool life and surface finish. Productivity improved with CBN050C wiper.

Comp. PCBNConventional

Feed rate (mm/rev)

CBN050CWiper

TEST RESULTS

18

GEAR SHAFT


Surface 5763 HRc Forged (smooth)

Operation OD Turning Continuous cutting

Grade CBN100

Insert TNGN110308S

Toolholder Special


fz 0,1 mm/rev

ap 0,10,15 mm

Coolant No

Tool life CBN100 = 110 minutesComp. PCBN = 63 minutes

CBN100

Comp. PCBN

Tool life/edge (min)

GEAR SHAFT



Operation OD Turning the spline Interrupted

Grade CBN150

Insert TNGN110308S-LF

Toolholder Special


fz 0,1 mm/rev

ap 0,10,15 mm

Coolant No

Tool life CBN 150 = 100 minutesComp. PCBN = 77 minutes

CBN150

Comp.PCBN

Tool life/edge (min)

PINION GEAR



Operation OD Turning - Continuous/spline

Grade CBN10

Insert TNGN110308S-LF

Toolholder Special


fz 0,1 mm/rev

ap 0,20,3 mm

Coolant No

Tool life Surface finish required 0,8 microns Ra

CBN10

Tool life/ No. of parts/edge

CLUTCH SLEEVES



Operation Plunging of two inner faces + the inner diameter

Grade CBN10

Insert LCGN300802-0800E-LF (spec)

Toolholder Special


fz 0,04 mm/rev

ap 0,050,1 mm

Coolant No

Tool life ~ 500 parts/edge

CBN10

Tool life/ No. of parts/edge

TEST RESULTS

20

CBN1

0

CBN1

00

C C G W 09 T3 04 S -

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

CBN1

0

CBN1

00

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

L0- WZ-

CNGA 120404S-L0 120408S-L0 120412S-L0

CNGA 120404S-L0-B 120408S-L0-B 120408S-01525-L0-B 120412S-L0-B 120412S-01525-L0-B

CNGA 120404S-L1 120404S-01525-L1-B 120408S-L1 120408S-01525-L1-B 120412S-L1 120412S-01525-L1-B

CNGA 120408S-L1-WZ 120408S-01525-L1-WZ-B 120412S-01525-L1-WZ-B

CNGA 120408S-L1-WZN-B 120408S-L1-WZP-B

[

[

[

[

[

[

[

[[[

[[

[

[

[[

[[[

[[

[

[

[

[

[

[

[

[

[

[[[

[

[

[

[

[

[[

[

[

CCGW 060202S-01020-LF 060204S-01020-LF 060208S-01020-LF

[[[

CCGW 09T302S-01020-LF 09T304S-01020-LF 09T308S-01020-LF

[[[

CCMW 060204E-L0 060208E-L0

CCMW 060204S-L0 060208S-L0

[[

[[

CCMW 09T304E-L0 09T308E-L0

CCMW 09T304E-L0-B 09T308E-L0-B

CCMW 09T304S-L0 09T308S-L0 09T312S-L0

CCMW 09T304S-L0-B 09T308S-L0-B

[

[[

[[

[[[

[[

CCGW 09T308S-L0-B

CCGW 120404S-L0 120408S-L0

CCGW 060204E-L1-B

CCGW 060204S-01525-L1-B 060208S-01525-L1-B

CCGW 09T304E-L1-B

CCGW 09T304S-01525-L1-B 09T308S-01525-L1-B 09T312S-01525-L1-B

CCGW 09T308E-L1-B

CCGW 09T304E-L0-WZ

CCGW 09T304S-L0-WZ

CCGW 09T304S-01525-L1-WZ-B

Grades

Inserts Part No.

CODE KEY

INSERT PROGRAMME, CBN CASE HARDENED

Insert shape

Side clearance angle

Tolerances

Insert type

Cutting edge length

Thickness

Nose radius Direction of cutting

Cutting edge designation

Uncoated Coated

Grades

Inserts Part No.

Uncoated Coated

Manufacturer option

Internal designation

21

CBN1

0

CBN1

00

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

CBN1

0

CBN1

00

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

[

[

RNGN 060300E

RNGN 060300S 060300S-01525

[

[[

[CNGN 09304S-WZ

DCMW 070202E-L0-B 070204E-L0-B DCMW 070202S-L0-B 070204S-L0-B 070208S-L0-B

[[[

[

[[

[[[

DCMW 11T302S-L0 11T304S-L0 11T308S-L0

DCMW 11T304E-L0-B 11T308E-L0-B

DCMW 11T304S-L0-B 11T308S-L0-B

[[

[[[

[[

[[

DNGA 150404S-L0-B 150404S-01525-L0-B 150408S-L0-B 150408S-01525-L0-B

[

[[

[

[

DNGA 150604S-L0 150608S-L0 DNGA 150604S-L0-B 150608S-L0-B 150608S-01525-L0-B

DNGA 150604S-L1 150608S-L1 150612S-L1

DNGA 150404S-01525-L1-B 150408S-01525-L1-B 150412S-01525-L1-B

DNGA 150604S-01525-L1-B 150608S-01525-L1-B 150612S-01525-L1-B

[[

[[

[[[

[[

[[

[[

[[

[[[

RCGN 0803M0S-LF 0803M0S-01525-LF

[[

[

[[

DNGN 110308E25

DNGN 110308S 110312S

RCGS 6.35S-LF [

RNGN 060300S-LF 060300S-01525-LF [ [

[

RNGN 090300S-LF 090300S-01525-LF [ [

[

[[

[

RNGN 090300E 090300E25

RNGN 090300S 090300S-01525

[

[[

[RNGN 120300S

DCGW 070204E-L1-B

DCGW 070202S-01525-L1-B 070204S-01525-L1-B 070208S-01525-L1-B

DCGW 11T304E-L1-B

DCGW 11T304S-01525-L1-B 11T308S-01525-L1-B 11T312S-01525-L1-B

[

[

[

[[[

[[[

CNGN 090304S 090308S 090312S

[[[

SNGA 120408S-01525-L1-D [

[SNGN 060308S 060308S-01525

[[

[[

[

SNGN 090304S 090308S 090308S-01525 090312S

[

TCGN 060104E-LF [

TCGW 110204E-L1 110204E-L1-C

[[

TCGW 110204S-01525-L1 110204S-01525-L1-C

TCGW 110208S-01525-L1-C 110208S-01525-L1

TCGW 090204S-01020-LF 090208S-01020-LF

TCGW 110204S-01020-LF 110208S-01020-LF

[[

[[

[[

[[

[

Grades

Inserts Part No.

Uncoated Coated

Grades

Inserts Part No.

Uncoated Coated

22

CBN1

0

CBN1

00

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

CBN1

0

CBN1

00

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

[[[[

[

[

[

TNGN 110304E 110308E 110308E25 110312E25

TNGN 110304S 110304S-01525 110308S 110308S-01525 110312S 110312S-01525

[

[[[[[[

[

TCMW 110204E-LO 110208E-LO

TCMW 110204E-LO-C 110208E-LO-C

TCMW 110204S-LO 110208S-LO

TCMW 110204S-LO-C 110208S-LO-C

[[

[[

[[

[[

[[

TNGA 160404S-LO 160408S-LO

TNGA 160404S-LO-C 160408S-LO-C 160408S-01525-LO-C

TNGA 160404S-L1 160404S-01525-L1 160408S-L1 160408S-L1-01525-L1

TNGA 160404S-01525-L1-C 160408S-01525-L1-C 160412S-01525-L1-C

[[

[

[

[[ [

[

[[

[[

[

[

[[

[

TNGA 110308S 110312S

TNGA 110308S-WZ

TNGN 110308S-01525-LF 110312S-01525-LF

[[

[[

[TNGN 160304S

[

[

TNGX 110304S-WZ 110304S-01525-WZ 110308S-01525-WZ 110308S-WZ

[[[[

[

[

TNGX 110308S-R-WZ

TNGX 110308S-L-WZ

[

[[

TPGN 110308E

TPGN 110304S 110308S

[

[

[

[

WNGA 060404S 060404S-01525 060408S 060408S-01525 060412S 060412S-01525

WNGA 060408S-WZ 060408S-01525-WZ

[

[

[

[

[

[[

[

[

WNGA 080404S-L0-C 080408S-L0-C

WNGA 080408S-01525-L1-C

WNGA 080408S-L0-WZ-C

WNGA 080408S-01525-L1-WZ-C 080412S-01525-L1-WZ-C

[[

[

VNGA 160402S-L0 160404S-L0 160408S-L0

VNGA 160404S-L0-B 160404S-01525-L0-B 160408S-L0-B 160408S-01525-L0-B

VNGA 160402S-01525-L1-B 160404S-01525-L1-B 160408S-01525-L1-B

VNGA 160404S-L2 160408S-L2

[

[

[[[

[[[

[

[

[[

[[[

VBGW 160402S-L0

VBGW 160404S-L0-B 160404S-01525-L0-B 160408S-L0-B 160408S-01525-L0-B

VBGW 160402E-L1-B 160404E-L1-B 160408E-L1-B 160408E-01525-L1-B

VBGW 160402S-01525-L1-B 160404S-01525-L1-B 160408S-01525-L1-B

VBGW 160408E-L2

VBGW 160404S-L2 160408S-L2

[

[

[[[[

[[[

[[[

[

[

[

[

[[

Grades

Inserts Part No.

Uncoated Coated

Grades

Inserts Part No.

Uncoated Coated

23

CBN1

0

CBN1

00

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

CBN1

0

CBN1

00

CBN1

50

CBN0

50C

CBN1

60C

CBN1

00P

LCGN 130304-0300E-LF 130304-0300S-LF

LCGN 130404-0400E-LF 130404-0400S-LF

[[

[[

LCGN 1303M0-0300E-LF 1303M0-0300S-LF

LCGN 1304M0-0400E-LF 1304M0-0400S-LF

[[

[[

LCGN 160304-0300E-LF 160304-0300E25-LF

LCGN 160304-0300S-LF

LCGN 160404-0400E-LF 160404-0400E25-LF

LCGN 160404-0400S-LF

LCGN 160504-0500E-LF 160504-0500E25-LF

LCGN 160504-0500S-LF

LCGN 160604-0600E-LF 160604-0600E25-LF

LCGN 160604-0600S-LF

[[

[

[[

[

[[

[

[[

[

LCGN 1603M0-0300E-LF 1603M0-0300E25-LF

LCGN 1603M0-0300S-LF

LCGN 1604M0-0400E25-LF


LCGN 1605M0-0500E25-LF


LCGN 1606M0-0600E25-LF


[[

[

[

[

[

[

[

[

Grades

Inserts Part No.

Uncoated Coated

Grades

Inserts Part No.

Uncoated Coated

Seco Tools AB, SE-737 82 Fagersta, Sweden. Tel. +46 223 400 00.www.secotools.com

02599245 ST20076112 GB SECO TOOLS AB, Grafiska Byrn rebro/PA Group Karlstad 2007

ARGENTINA Seco Tools S.A. Tel. 54 11 4892-0060 Fax 54 11 4723-8600. AUSTRALIA Seco Tools Australia Pty. Ltd. Tel. 1300 55 7326 Fax 1300 65 7326. AUSTRIA Seco Tools GmbH Tel. (2253) 21040 Fax (2253) 21040-11. BELGIUM S.A. Seco Tools Benelux N.V. Tel. (02) 389 09 60 Fax (02) 389 09 89. BOSNIA See Solvenia. BRAZIL Seco Tools Ind. Com. Ltda. Tel. (0xx15) 2101-8631/34 Fax (0xx15) 2101-8605. BULGARIA See Sweden. CANADA Seco Tools Canada Inc. Tel. (905) 693 1780 Fax (905) 693 1788. CHINA Seco Tools (Shanghai) Co. Ltd. Tel. + 86 - 21- 5426 5500 Fax + 86-21-64855685. COLOMBIA Rexo Tools Tel.(57 1)-6606030/31/32/33/35/37 Fax (57 1)-3110026. CROATIA See Slovenia. CZECH REPUBLIC Seco Tools CZ s.r.o. Tel. 549 249 241 / 549 216 399 Fax 549 245 740. DENMARK Seco Tools A/S Tel. 43 44 76 00 Fax 43 44 50 30. ECUADOR See Sweden. FINLAND Seco Tools Oy Tel. (09) 2511 72 00 Fax (09) 2511 72 01. FRANCE Seco Tools France Tel. 0825 826 379 Fax 02 48 67 27 05, Seco EPB Tel. 03 88 71 38 89 Fax 03 88 70 98 98. GERMANY Seco Tools GmbH Tel. (0211) 2401-0 Fax (0211) 2401275. GREECE Athens Mechanica Tel. 2105231284-5 Fax 2105231286. HONGKONG Seco Tools (Shanghai) Co. Ltd. Tel. 86- 21 - 5426 5500 Fax +86 - 21 - 64855685. HUNGARY Seco Tools KFT Tel. (36-1) 267-6720 / 383-6568 Fax (36-1) 267- 6721. INDIA Seco Tools India (P) Ltd. Tel. 02137-667300 Fax 02137-667430. INDONESIA See Singapore. ITALY Seco Tools Italia S.p.A. Tel. 031-978111 Fax 840-000938. JAPAN Seco Tools Japan. K.K. Tel. 03-3239- 3071 Fax 03-3230-4955. MACEDONIA See Slovenia. MALAYSIA Seco Tools Malaysia Sdn Bhd Tel. 03-90591833 Fax 03-90594833. MEXICO Seco Tools de Mexico Tel./Fax 210-543-2200.NETHERLANDS Seco Tools Benlux N.V. Tel. 0183-636600 Fax 0183- 6606. NEW ZEALAND Seco Tools New Zealand Ltd. Tel. 09-415 8441 Fax 09-415 8442. NORWAY Seco Tools A/S Tel. 67927300 Fax 67927302. PHILIPPINES See Singapore. POLAND Seco Tools (Poland) Sp. z.o.o. Tel. (0-22) 637 53 86/85 Fax (0-22) 637 53 84. PORTUGAL Seco Tools Portugal, Lda. Tel. 256 371 650 Fax 256 371659. ROMANIA Seco Tools Romania S.R.L. Tel 40 268 414 723 Fax 40 268 476 772. RUSSIA Seco AB Moscow Representative Office. Tel +7(495)-680-1322 Fax +7(495)-680 6241. SERBIA AND MONTENEGRO See Slovenia. SINGAPORE Seco Tools (S.E.A.) Pte. Ltd. Tel. (65) 68 41 28 02 Fax (65) 68 41 28 01. SLOVAKIA Seco Tools SK s.r.o. Tel. 421 33 55 13 537, 421 33 53 41 911 Fax 421 33 55 13 538. SLOVENIA Seco Tools SI d.o.o. Tel. 003 86 2 450 23 40 Fax 00386 2 450 23 41. SOUTH AFRICA Seco Tools S.A. (Pty) Ltd. Tel. (011) 36 22 660 Fax 011 362-1893. SOUTH KOREA Seco Tools Korea Ltd. Tel. 041 622 -9785 to 9 Fax 041 622-9784. SPAIN Seco Tools Espaa S.A. Tel. 934 745 533 Fax 934 745 550. SWEDEN Seco Tools AB Tel. 223 400 00 Fax 223 718 60 Telex 7510. SWITZERLAND Seco Tools AG Tel. 0041-32 332 78 78 Fax 0041-32 332 78 79. TAIWAN Seco Tools Taiwan Tel. 02-26577918 Fax 02-26579461. THAILAND Seco Tools Thailand Tel. 02-7467 801 Fax 02-7467 802. TURKEY Seco Tools A.S. Tel. +90 (216) 569 74 00 Fax +90 (216) 575 73 83. UKRAINE Seco Tools Ukraine Tel. (056) 790 05 44 Fax. (056) 790 05 43 UNITED KINGDOM Seco Tools (U.K.) Ltd. Tel (01789) 764341 Fax (01789) 761170. USA Seco Tools Inc. Tel. 586-497 5000 Fax 586-497 5627/5629.

Documents

Seco tools