SD7151

8/9/2019 SD7151

http://slidepdf.com/reader/full/sd7151 1/8

8/9/2019 SD7151


EN-1

E n g l i s h

Warning Before Install

Contact your distributor when

such cases happen.

Refer to your user's manual for theoperating temperature.

Power off the Network Cameraas soon as it is found smoking or

smelt unusual.

Do not touch the Network Camera

when it's lightening.Do not disassemble the Network

Camera.

Do not drop the Network Camera.Do not insert any object into the

Network Camera, such as needles.

Do not manually pan and tilt the

Network Camera when the power is

on.

8/9/2019 SD7151


EN-2

Package Contents1

Power adapter

Software CD

SD7151

O-ring and screws

Warranty card

Black cover / Dome cover

Wall mount bracket

RJ45 female/female coupler Quick installation guide

Alignment sticker

8/9/2019 SD7151


EN-3

E n g l i s h

Inner view

Reset button

Lens

Outer view

Physical Description2

Status LED

Ethernet 10/100RJ45 plug

Audio out (green)Microphone in (pink)Power cord socket (black)

General I/Oterminal block

Earth

8/9/2019 SD7151


EN-4

Hardware Installation3

Mounting the Network Camera1. Attach the alignment sticker to the wall.

2. Drill four pilot holes into the wall.

3. Attach the black cover to the Network Camera using the supplied four black screws.

4. Fix the dome cover to the Network Camera and secure it by rotating it clockwise.

5. Loosen the three screws on the front opening of the wall mount bracket.

6. Place the O-ring on the front opening of the wall mount bracket.

7. Feed the cables through the front opening of the wall mount bracket and pull them

from wall outlet.

8. Attach the Network Camera to the wall mount bracket by tightening the three

screws on the front opening of the wall mount bracket.

9. Fasten the wall mount bracket to the wall.

1

2

3

4

5

67 8

9

8/9/2019 SD7151


EN-5

E n g l i s h

Network Deployment4

P OW ER C O LLIS IO N

LIN K

R EC EIV E P A R T I TI O N

1 2 3 4 5

1. If you have external devices suchas sensors and alarms, makeconnection from general I/O terminalblock.

2. Use the supplied RJ45 female/femalecoupler to connect the Network Camerato a switch.

Use Catagory 5 Cross Cable whenNetwork Camera is directly connectedto PC.

3. Connect the power cable from the

Network Camera to a power outlet.

G N D : Ground

D I 4 : Digital InputD I 3 : Digital InputD I 2 : Digital InputD I 1 : Digital Input

G N D : GroundN. O. : RELAY_NOCO M. : RELAY_COM+12V : Power, 12V DC

(AC 24V 2A)

8/9/2019 SD7151


EN-6

1. Install the "Installation Wizard 2" under the Software Utility directory from software CD.

2. The program will conduct analyses on your network environment. After your network isanalyzed, please click on the "Next" button to continue the program.

3. The program will search the VIVOTEK Video Receivers, Video Servers or NetworkCameras on the same LAN.

4. After searching, the main installer window will pop up. Click on the MAC thatmatches the one labeled on the side of the camera lens or S/N number on thelabel of carton to connect the Internet Explorer to the Network Camera.

0002D17151CD

1

2 Model No.:SD7151

P/ N: 1 00 04 36 90 G

F/W Ver.: 0100G

CARTON OF NO. 01

MADE IN TAIWAN

Q'ty: 1 PCS

E AN : 4 7 12 12 36 71 5 50

S/N: 0002D17151CD

RoHS

0002D17151CD

Installation

Wizard 2

IW2

Assigning IP Address5

8/9/2019 SD7151


EN-7

E n g l i s h

For further setup, please refer to user's manual on the software CD.

Ready to Use6

1. Access to the Network Camera from the Internet.2. Retrieve live video through web browsers or recording software.

Documents

SD7151