2
 International Journal of Rock Mechanics & Mining Sciences 40 (2003) 607 Corrigendum Corrigendum to ‘‘Estimating the deformation modulus of rock masses: a comparative study’’ [Int. J. Rock Mech. Min. Sci. 40 (1) (2003) 55–63] $ A. Kayabasi a , C. Gokceoglu b, *, M. Ercanoglu b a General Directorate of Electrical Power Researches Survey and Development Administration, Ankara, Turkey b Department of Geological Engineering, Hacettepe University, Applied Geology Division, Beytepe, Ankara 06532, Turkey Accepted 18 February 2003 A typing error was detected in the article recently published by Kayabasi et al. (2003). The correct form of Eq. (11) was given in Fig. 3 in the original article. For this reason, Eqs. (10) and (11) should be replaced as follows: E M  ¼ 0:135  CP WD 1:1811 ;  ð10Þ E M  ¼ 0:135½ðE i ð1 þ RQD=100ÞÞ=WD 1:1811 :  ð11Þ $ PII of original article S1365-1609(02)00112-0 *Corresp onding author. Fax: +90-312-2 352542. E-mail address: cgokce@hacettepe. edu.tr (C. Gokceog lu). 1365-1609/03 /$ - see fron t matt er r 2003 Published by Elsevier Science Ltd. doi:10.1016/S1365-1609(03)00024-8

Sd Article 2

Embed Size (px)

DESCRIPTION

kabayashi

Citation preview

Page 1: Sd Article 2

7/18/2019 Sd Article 2

http://slidepdf.com/reader/full/sd-article-2 1/1

International Journal of Rock Mechanics & Mining Sciences 40 (2003) 607

Corrigendum

Corrigendum to ‘‘Estimating the deformation modulus of 

rock masses: a comparative study’’

[Int. J. Rock Mech. Min. Sci. 40 (1) (2003) 55–63]$

A. Kayabasia, C. Gokceoglub,*, M. Ercanoglub

a General Directorate of Electrical Power Researches Survey and Development Administration, Ankara, TurkeybDepartment of Geological Engineering, Hacettepe University, Applied Geology Division, Beytepe, Ankara 06532, Turkey

Accepted 18 February 2003

A typing error was detected in the article recently published by Kayabasi et al. (2003). The correct form of Eq. (11)

was given in Fig. 3 in the original article. For this reason, Eqs. (10) and (11) should be replaced as follows:

E M  ¼ 0:135  CP 

WD

1:1811

;   ð10Þ

E M  ¼ 0:135½ðE i ð1 þ RQD=100ÞÞ=WD1:1811:   ð11Þ

$PII of original article S1365-1609(02)00112-0

*Corresponding author. Fax: +90-312-2352542.

E-mail address:  [email protected] (C. Gokceoglu).

1365-1609/03/$ - see front matter r 2003 Published by Elsevier Science Ltd.

doi:10.1016/S1365-1609(03)00024-8