SCPH-9002 A

3-868-168-12(1)

Instruction ManualThank you for purchasing the “PlayStation” video game console.You can enjoy playing CD-ROM discs with both the“PlayStation” logo and [PAL] designation, and audio CDs withthis unit. Before operating the unit, please read this manual andretain it for future reference.

© 1995-2000

Connector section

Disc cover

§ button

Controller ports

Directional buttons

L2 button, R2 button,L1 button, R1 button

¢ , ® , ✕ , π buttons

1/u buttonand indicator

RESET button

SELECT button

START button

Left stick, right stickL3 button, R3 button

MEMORY CARD slots

ANALOG mode switch

Sony Computer Entertainment Inc. All rights reserved.

2

This appliance is classified as a CLASS 1 LASERproduct. The CLASS 1 LASER PRODUCTMARKING is located on the bottom of the“PlayStation”.

PrecautionsYour”PlayStation” is not disconnected from the ACpower source (mains) as long as it is connected to thewall outlet, even if the unit itself has been turned off.

About the nameplateThe nameplate is located on the bottom of the“PlayStation”.

To prevent fire or shock hazard, do notexpose the unit to rain or moisture.

To avoid electrical shock, do not openthe cabinet. Refer servicing to qualifiedpersonnel only.

WARNINGTo prevent shock hazard, do not insert theplug cut off from the mains lead into asocket outlet. This plug cannot be used andshould be destroyed.

CautionThe use of optical instruments with thisproduct will increase eye hazard.

Read before operating your“PlayStation”A few people may experience epilepticseizures when viewing flashing lights orpatterns in our daily environment. Thesepersons may experience seizures whilewatching TV pictures or playing videogames. Even players who have never hadany seizures may nonetheless have anundetected epileptic condition.Consult your doctor before playing videogames if you have an epileptic condition orshould you experience any of the followingsymptoms during play: altered vision,muscle twitching, other involuntarymovements, loss of awareness of yoursurroundings, mental confusion, and/orconvulsions.

On safety• The laser beam emitted from the lens of your

“PlayStation” is harmful to the eyes. Do notdisassemble the casing. Servicing should becarried out by qualified personnel only.

• Should any solid objects or liquid fall into your“PlayStation”, unplug it immediately and haveit checked by qualified personnel before anyfurther use.

• When not in use, disconnect your“PlayStation” from the mains. Whendisconnecting, grasp the plug and pull it fromthe wall socket. Never pull the cord itself.

For your health• Be sure to take a break of about 15 minutes

during every hour of play.• Do not play a game when you are very tired or

short of sleep.• Play in a well lit room, sitting as far from the

screen as the cord will allow.

On operation• Operate your “PlayStation” only on 220 - 240 V

AC, 50/60 Hz.• Do not cover your “PlayStation” during use as

heat may build up internally.• Avoid rough handling or mechanical shock

and do not put any heavy objects on your“PlayStation”. This could damage the consoleor the disc.

• Do not leave your “PlayStation” near heatsources, or in a place subject to direct sunlight(operating temperature: 5˚C - 35˚C), excessivedust or sand, moisture, rain, on an unevensurface, or in a car with its windows closed.

• If your “PlayStation” causes interference toradio or television receptions, turn it off ormove it away from those appliances.

• Do not touch the lens inside the disc cover. Toprotect the lens from dust, keep the disc coverclosed except when inserting or removing adisc. If the lens is not clean, your “PlayStation”may not operate properly.

• Your “PlayStation” is not disconnected fromthe AC power source (mains) as long as it isconnected to the wall outlet, even if the unititself has been turned off.

About the discs• You can use the two kinds of discs with your

“PlayStation”: CD-ROM discs with both “PlayStation”logo and [PAL] designation, and audio CDs.

• Some discs sold in foreign countries cannot beused with this unit.

On handling discs• Do not leave the discs near heat sources or in

direct sunlight or excessive moisture.• Store the discs in their cases when they’re not in

use.• When handling the discs, do not touch the

surface.Hold them by the edge.

• Do not stick paper or tape on the discs.• Do not write on the discs with a marker, etc.

On moisture condensationIf your “PlayStation” is brought directly from a coldto a warm location, or is placed in a very damproom, moisture may condense on the lens inside.Should this occur, your “PlayStation” may notoperate properly. In this case, remove the disc forseveral hours until the moisture evaporates. If your“PlayStation” still does not operate properly, call theappropriate “PlayStation” customer service numberwhich can be found on the customer registrationcard, within every “PlayStation“ software manualand on our websites www.playstation-europe.comand www.playstation.com.au

Do not connect your “PlayStation” to aprojection TVDo not connect your “PlayStation” to a projectionTV unless it is the LCD type. Permanent damage toyour TV screen could otherwise result.

Never analyse or remodel your“PlayStation”Use your “PlayStation” following the instructionsin this manual. Sony Computer Entertainment Inc.expressly prohibits the analysis or remodelling ofthe “PlayStation”, and also prohibits the analysis,use of its circuit configurations without expresswritten permission of Sony ComputerEntertainment Inc.

PrecautionsWARNING

3Check that you have the following items:

AC Power Cord AV Cable (integratedaudio/video)

Analog Controller(DUALSHOCK)

Console

Unpacking Table of contents

WARNING 2

Precautions 2

Unpacking 3

Connecting your“PlayStation” to a TV set 4

Playing a game 4

Analog Controller(DUALSHOCK) usage 6

Using the MEMORY CARD 8

Playing an audio CD 10

Enjoying the SoundScope 12

Troubleshooting 14

Specifications

GUARANTEE 9

Backcover

Backcover

4

Press § (open) button.The disc cover opens.

Insert a disc with the label side up.

Close the disc cover.

Press 1/u (power) button.The 1/u indicator lights up.After the start-up screen, screen C 1 appears and the game begins.

Set the supplied Analog Controller (DUALSHOCK) to the appropriate mode for the software(see page 6).

Connecting to a TV with audio/video inputsConnect your “PlayStation” to the TV using the supplied AV Cable (integrated audio/video), making sure you match the colours on the plugs and terminals.If your TV is monaural, do not connect the red plugs. If you want to hear both left and rightsounds from a monaural TV, use a commercially available 3-phono to 2-phono (stereo tomonaural) type audio/video cable.

After connectingSet your TV to the appropriate video input mode. (Refer to the instruction manual of yourTV.)

IMPORTANT INFORMATION

For the customers in Australia and New ZealandA few models of television sets or monitors may display a bouncing or other incorrect screeneffect when connected to the “PlayStation”. Any applicable warranties offered by SonyComputer Entertainment Europe may be limited or disclaimed in some particular cases of thisoccurrence. Should you experience any difficulties for whatever reason with your“PlayStation” please call the appropriate “PlayStation” customer service number which can befound on the customer registration card, within every “PlayStation“ software manual and onour websites www.playstation-europe.com and www.playstation.com.au

Playing a game

1

Connecting your ”PlayStation” to a TV set

2

3

4

5

A Restarting a game

Press RESET button.Be careful not to press RESET button whileplaying the game, or the game will end.

B Removing a disc

Press § button.While pressing the central spindle gently,pick up the disc holding the edge.

RESET button

§ button

Tips• When you end a game, press § button, remove a

disc and press 1/u button to turn off the“PlayStation”.

• If you turn on your “PlayStation” without firstinserting a disc, screen C2 appears. It gives youaccess to the audio CD control screen and theMEMORY CARDS activity screen, described lateron in this manual. If you insert a CD-ROM disc ofthe “PlayStation” format while screen C2 is on,the game will start automatically.

• If the screen C3 appears, the inserted disc mightbe of a different format. Check if it has both the“PlayStation” logo and [PAL] designation on it. Adamaged or dirty disc would also produce thisscreen.See ”Troubleshooting“ on page 14.

Notes• There is no need to turn off the “PlayStation” if

you want to change games. Just open the disccover and wait until the disc stops spinning, swapthe discs over and then press RESET button.

• When inserting a disc, push the disc gently butfirmly until it sits snugly on the central spindle.

MWARNINGBefore removing a disc, press the § button and makesure that the disc completely stops.Never touch the disc while it is spinning. Otherwise,you may hurt yourself or damage the disc or your“PlayStation”.

C Screens that appear afterthe start-up screenWhen you turn on your “PlayStation”, oneof the following screens will appear.

1 A CD-ROM with both “PlayStation”logo and [PAL] designation is inserted.

2 No disc is inserted.

3 A disc that cannot be played with the“PlayStation” is inserted.

6

A Mode switching and LEDdisplayThis Analog Controller (DUALSHOCK) canbe switched between two modes bypressing the ANALOG mode switch.Each time the ANALOG mode switch ispressed, the mode changes as follows.

Digital mode (LED display : Off) µ

Analog mode (LED display : Red)

NoteAfter checking the “ ”icons on the software, switch to the appropriate modefor use.Note however, that some software makes thisadjustment automatically. In such cases, theANALOG mode switch is overridden by the software.For details, refer to the software manual.

LED

ANALOG mode switch

Analog Controller (DUALSHOCK) usage

R1 button

π button

¢ button

® button

✕ button

LED display: Off

SELECTbutton

STARTbutton

L1 button

L2 button R2 button

ANALOG modeswitch

Directionalbuttons

B Digital mode (LED display : Off)You can use this controller in the same manner as the SCPH-1080 Controller.

7

Before using the controller, rotate the sticks oncewith your thumbs as if drawing a circle, as shownin the diagram at left. Do not twist the sticks.

C Analog mode (LED display: Red)Supports software with “ ” icon.

Vibration functionThis Analog Controller (DUALSHOCK) is atouch sensitive controller with a vibrationfunction. The vibration function can be setto ON or OFF on the monitor with thesoftware. The function of each button mayvary depending on the software played.Refer to individual software manuals forfurther details.

Notes• When the Analog Controller (DUALSHOCK) is

not used, turn the “PlayStation“ off or unplug thecontroller from the “PlayStation”.

• Before using the vibration function of thiscontroller, please read the following notes onsafety.

For safety• Stop using this unit immediately if you become

tired or if you experience unpleasantness orpain in your hands or arms while using. If thecondition persists, consult your doctor.

• Do not attempt to operate the controller withanything other than your hands. Do notoperate the controller with, or attach it to; yourhead, elbows, other bony parts of your body,face, or stomach.

• Absolutely do not use the vibration function ofthe Analog Controller (DUALSHOCK) if youhave any ailment in the bones or joints of yourhands or arms.

• Absolutely do not use the vibration function ofthe Analog Controller (DUALSHOCK) whenyour fingers, hands, wrists, or arms are broken,dislocated, or sprained; or if you have a pulledmuscle. These ailments may become worse dueto the vibration of the controller.

• Do not continue to use the Analog Controller(DUALSHOCK) for a long time. Take a rest atabout 30 minute intervals.

Right stick /R3 button *

SELECTbutton

Left stick /L3 button *

STARTbutton

LED display: Red

R2 button

ANALOG mode switch

Directional buttons

L2 button

L1 button R1 button

* The R3 button and the L3 button function when the stick is pressed.

π button

¢ button

® button

✕ button

8 Using the MEMORY CARD

2

1

3

64 5

9

8

7

A MEMORY CARD screen

1 Contents of MEMORY CARD 1. The game data is displayed as icons.2 Icon. The number of icons corresponds to the number of used memory blocks.3 Arrow pointer.4 Copy the selected game data.5 Copy all the game data on the selected card.6 Delete the selected game data.7 Exit from this screen.8 Contents of MEMORY CARD 2.9 Displays of the game name and other details of the selected data.

You can save and load game data using theoptional SCPH-1020 MEMORY CARD.Each MEMORY CARD has 15 memoryblocks.

You can copy game data from oneMEMORY CARD to another or deleteunnecessary data, by bringing up theMEMORY CARD screen.

Set the supplied Analog Controller(DUALSHOCK) to digital mode (LEDdisplay: Off).

1 ...... Turn on your “PlayStation” beforeinserting a disc.

2 .... Insert MEMORY CARD (or twoMEMORY CARDS).

3 .... Select “MEMORY CARD” with thedirectional buttons and press the ®button.

Cancelling the MEMORY CARD screenSelect “EXIT” on the MEMORY CARDscreen with the directional buttons andpress the ® button.

MEMORY CARD 1 MEMORY CARD 2

9

Copying game data1 ... Check that the card you’re copying to

has enough memory blocks, then select“COPY”.

2 ... Select the card containing the data tobe copied.

3 ... Select the icon for the data to becopied.

4 ... Select “YES”.Or select “NO” to cancel copying.

Notes• You cannot copy the data to a card that does not

have enough empty blocks. Delete unnecessarydata.

• Do not remove the card until the icons stopmoving.

Copying all the game data1 ... Check that the card you’re copying to

has enough memory blocks, then select“COPY ALL”.

2 ... Select the card to be copied .

3 ... Select “YES”.Or select “NO” to cancel copying.

Notes• Do not remove the card until the icons stop

moving.• If the data you want to copy already exists on the

card, the data will not be copied.

B MEMORY CARD operation

® buttonDirectional buttons

Deleting game data1 ... Select “DELETE”.

2 ... Select the card that has the data youwish to delete.

3 ... Select the icon of the data you wish todelete.

4 ... Select “YES”.Or select “NO” to cancel deleting.

How to use the controller for theMEMORY CARD screen

• To move the arrow pointer: Press thedirectional buttons.

• To select the items: Press the ® button.

TipYou can also operate using the optional SCPH-1090Mouse.

10Your “PlayStation” can also play audioCDs. There are two control methods for theaudio CD facility.• Selecting the buttons on the audio CD

screen operation (A)• Pressing the buttons on the controller

(direct key operation, C)Set the supplied Analog Controller(DUALSHOCK) to digital mode (LEDdisplay: Off).

NoteAs the two ways above work at the same time, besure not to confuse the operation.

Selecting audio CD operationInsert an audio CD and turn on the power.You can also insert an audio CD afterturning on the power. (You do not have toturn off your “PlayStation” when changingCDs.)

Cancelling audio CD operationSelect “EXIT” on the screen with thedirectional buttons and press the ® button.

Playing an audio CD

09 !¡ !™ !£8

!¢

!∞

!§

!¶

!•

1

2

3

4

7

6

5

A Audio CD screen

1 Find the start of the next track.2 Fastforward.3 Play.4 Stop.5 Pause.6 Rewind.7 Find the start of the current or previous

track.8 Displays the selected playback mode.9 Play a single track or all tracks

repeatedly.0 Play all tracks on the disc in order.

!¡ Change the playback time display.!™ Play the tracks in random order.!£ Play selected tracks in a specified order.!¢ Displays the current track number, and

the elapsed or remaining playbacktime. Press the “TIME” button toswitch the display.

!∞ Arrow pointer.!§ Select the track number(s) from a grid

showing all the tracks on the CD.!¶ Display track numbers higher than 20

(appears only when there are more than20 tracks on a CD).

!• Cancel audio CD operation.

11

B Various playback modes

® buttonDirectional buttons

=

0

(, P

)

+

Start SoundScope(see page 12)

Playing tracks on a loop• To repeat the current track, select

“REPEAT” until “REPEAT 1” appears.• To repeat all the tracks, select “REPEAT”

until “REPEAT ALL” appears.To resume normal play, select “REPEAT”until “REPEAT” indication disappears.

Programming a sequence of tracks1 .... Select “PROGRAM”.

2 .... Select the track number you want toplay.Repeat this step until you haveselected all the tracks you want toinclude.

3 .... Select “(”.To resume normal play, select“CONTINUE”.

Playing tracks in random order1 .... Select “SHUFFLE”.

2 .... Select “(”.To resume normal play, select“CONTINUE”.

C To operate the CD directly with the controllerUsing the buttons on the controller, you can control basic CD operations withoutlooking at the screen.

How to use the controller for the CDoperation screen

• To move the arrow pointer: Press thedirectional buttons.

• To select the items: Press the ® button.

TipYou can also operate using the optional SCPH-1090Mouse.

Playing a CD through to the end onceSelect “(”.

12 Enjoying the SoundScope

1* 2* 3 4* 5*

6*

7

9

0

!™

!£

* : Press these buttons while holding down ✕ button to save your operation or change the sizeof the picture. For details, see "C Additional operations".

!¡

8*

A SoundScope operation

1 - 5 Audio CD operation:1 Find the start of the current or

previous track.2 Rewind3 Play / Pause4 Fastforward5 Find the start of the next track.

6 Shorten the interval of displayedpictures.

7 Change the pattern of the picture.

Playing Audio CDs on your “PlayStation”will activate the SoundScope feature, agraphical representation of the music youare playing. Using the buttons on thecontroller, you can choose your favoritepicture from 24 patterns, change the colorof the picture or add the effect of anafterimage. You can also save and loadyour SoundScope settings using theMEMORY CARD.When enjoying SoundScope, set thesupplied Analog Controller(DUALSHOCK) to digital mode andoperate the CD directly with the controller(LED display: Off).

Starting SoundScope operationPress SELECT button when the CDoperation screen is displayed.

Returning to the CD operation screenPress SELECT button.

8 Lengthen the interval of displayedpictures.

9 Return to the CD operation screen.0 Add the effect of an afterimage to the

picture.!¡ Select the pattern of the picture in

random order.!™ Use this ✕ button with others for

additional operations.!£ Change the color of the picture.

13

Saving the stored operation in theMEMORY CARDPress R2 button while holding down ✕button.A mark appears on the upper right of thescreen.

NoteYou can store only one custom setting of SoundScopeoperation. If the data already exists, it is erased.

Loading the data in the MEMORY CARDPress L2 button while holding down ✕button.A mark appears on the upper left of thescreen. To use the loaded data, follow theprocedure above.

Changing the size of the picturePress the directional buttons (up or down)while holding down ✕ button.

Changing and Storing the settings1 .... During playback, press R1 button

while holding down ✕ button.A mark flashes on the lower right ofthe screen.

2 .... Operate the controller.While the mark is lit, any changes youmake to the SoundScope operationwith the controller are stored.

3 .... When you are finished, press R1button while holding down ✕ button.The mark disappears and theprocedure is completed.

NoteDo not unplug the controller during the procedures.

Switching to stored settings1 ... During playback, press L1 button

while holding down ✕ button.A mark appears on the lower left of thescreen, and the SoundScope picture istransformed by the stored operation.

2 ... Press L1 button while holding down ✕button.The mark disappears and theprocedure is completed.

TipYour stored setting is lost when you turn off the“PlayStation”. If you want to keep the data, you cansave and load it by using the MEMORY CARD withone memory block.

C Additional operations

For the CD operation screen• To move the mouse pointer(+): Move the

Mouse.• To select the items: Press the left button.

A!£

A8

A!£

A!¡

A9

A6

B Operation with theMouseYou can also operate SoundScope using theMouse (SCPH-1090 : sold separately). Referto A for the operation.

14

7 Is the inserted disc either a CD-ROM disc with both the“PlayStation” logo and [PAL]designation or an audio CD?Insert such a CD-ROM disc or anaudio CD.If the problem persists, bCheck 8

8 Is the disc cover closed firmly?If not, close it firmly.If the problem persists, bCheck 9

9 Is the disc inserted with thelabel side up?If not, insert the disc with the labelside up.If the problem persists, bCheck 10

10 Check to see if the"PlayStation" is set to pausemode.If “Yes”, cancel it.If the problem persists, bCheck 11

11 Did you bring your“PlayStation” directly from acold to a warm location beforeyou inserted the disc?If “Yes”, b Diagnosis CIf “No”, b Check 12

Checks1 Is the TV volume set properly?

If not, adjust the volume. Make sure“mute” is not selected on the TV.If the problem persists, bCheck 2

2 Is the channel position or inputselector of the TV set correctly?If not, set it to the correct position.If the problem persists, bCheck 3

3 Is your “PlayStation” correctlyconnected to a TV (or a VCR)with the cable?If not, connect it correctly.If the problem persists, bCheck 4

4 Is the AC power cord connectedto your “PlayStation” and thewall socket?Connect the AC power cord firmly toa wall socket and to the“PlayStation”.If the problem persists, bCheck 5

5 Is the power turned on to bothyour “PlayStation” and the TV?If not, turn on the “PlayStation” andthe TV.If the problem persists, bCheck 6

6 Is a disc inserted in your“PlayStation”?If not, insert a disc.If the problem persists, bCheck 7

Troubleshooting

If you experience any of the following problems, read the instructions for the specified“Check” or “Diagnosis”.

1 No sound ∫ Check 1

2 No picture on the screen. ∫ Check 2

3 The picture and the sound skip. ∫ Check 12

4 The screen and the sound freezeor the game (or audio CD) stops playing. ∫ Check 13

5 The game (or audio CD) does not start. ∫ Check 6

6 The controller does not work. ∫ Check 14

7 A game (or audio CD) that once workedperfectly, now no longer does. ∫ Check 17

8 You cannot save game data usingthe MEMORY CARD. ∫ Check 18

9 The vibration function of the AnalogController (DUALSHOCK) does not work. ∫ Check 14

10 The screen and sound are noisy. ∫ Diagnosis E

11 The error message appears on the screen. ∫ Diagnosis F

Symptoms

15

12 Is your “PlayStation” placed ona stable surface?Install the “PlayStation” in a flatstable place.Do not shake or vibrate the“PlayStation”.If the problem persists, bCheck 13

13 Check to see if another game(or audio CD) will work.If “Yes”, b Diagnosis AIf “No”, b Diagnosis B

14 Is the controller connected toyour “PlayStation”?If not, connect it to the Controller portof the “PlayStation”.If the problem persists, bCheck 15

15 Is the Analog Controller(DUALSHOCK) set to theappropriate mode for thesoftware?Switch to the appropriate mode.If the problem persists, bCheck 16

16 Check to see if anothercontroller will work.If “Yes”, b Diagnosis DIf “No”, b Diagnosis F

17 Check to see if another game(or audio CD) will work.If “Yes”, b Diagnosis AIf “No”, b Diagnosis F

A There is a problem withthe disc.Clean the underside of the disc witha CD cleaner and try to play it again.To clean the disc, refer to the instructionmanual of the CD cleaner.If the problem persists, the disc maybe defective.

B The lens may be dirty.Clean the lens by using a plastic lenscleaning kit.To clean the lens, refer to the instructionmanual of the plastic lens cleaning kit.If the problem persists, call theappropriate “PlayStation” customerservice number which can be foundon the customer registration card,within every “PlayStation“ softwaremanual and on our websiteswww.playstation-europe.com andwww.playstation.com.au

C Moisture condensationhas occured on the disc.Remove the disc and leave it until themoisture evaporates, or clean theunderside of the disc using a CDcleaner.

D There is a problem withthe controller.Call the appropriate “PlayStation”customer service number which canbe found on the customer registrationcard, within every “PlayStation“software manual and on our websiteswww.playstation-europe.com andwww.playstation.com.au

E Check the connectionbetween your“PlayStation” and theTV (or VCR).Insert the plugs of the connectingcable firmly into the connectors. If thepicture and the sound are stillpicking up noise, the plugs may bedirty or there may be a short insidethe cable. If the problem persists evenafter trying another cable, call theappropriate “PlayStation” customerservice number which can be foundon the customer registration card,within every “PlayStation“ softwaremanual and on our websiteswww.playstation-europe.com andwww.playstation.com.au

F There is a problem withyour “PlayStation”.Call the appropriate “PlayStation”customer service number which canbe found on the customer registrationcard, within every “PlayStation“software manual and on our websiteswww.playstation-europe.com andwww.playstation.com.au

G There is a problem withthe MEMORY CARD.Call the appropriate “PlayStation”customer service number which canbe found on the customer registrationcard, within every “PlayStation“software manual and on our websiteswww.playstation-europe.com andwww.playstation.com.au

18 Is the MEMORY CARD inserted inyour “PlayStation”?If not, insert it in the MEMORYCARD slot of the “PlayStation”.If the problem persists, bCheck 19

19 Are there empty blocks on theMEMORY CARD?Keep empty blocks on the MEMORYCARD.If the problem persists,bDiagnosis G

Diagnoses

16GUARANTEEThank you for buying this Product.

Sony Computer Entertainment Europe (“SCEE”) will, for a period of 1 (one) year from the date of originalpurchase, repair or (at SCEE’s option) replace any component part of this Product, free of charge, where itis faulty due to defective materials or workmanship. Replacement will be with a new or refurbished unit,at SCEE’s option.

The benefits conferred by this Guarantee are in addition to other rights and remedies which the consumerhas in law in Australia in respect of this Product, including rights and remedies available under the TradePractices Act 1974 and State and Territory legislation.

IMPORTANT(1) If you need to claim under this Guarantee, please call the appropriate customer service number for

return instructions and other guidance.(2) This Guarantee is only valid:

(i) in Australia and New Zealand;(ii) when the original sales receipt or invoice (indicating the date of purchase and retailer’s name) is

presented together with the faulty Product (and has not been altered or defaced since the date oforiginal purchase).

(3) You may not claim under this Guarantee when the Product is damaged as a result of:(i) commercial use, accident, fair wear and tear or misuse (including, without limitation, failure to use

this Product for its normal purpose and/or in accordance with instructions on proper use andmaintenance, or installation or use in a manner inconsistent with applicable local technical orsafety standards);

(ii) use in conjunction with any unauthorised peripheral (including, without limitation, gameenhancement devices, adaptors and power supply devices);

(iii) any adaptation or adjustment to, or alteration of, this Product carried out for anyreason, and whether properly carried out or not; or

(iv) maintenance or repairs carried out other than by an authorised service facility.(4) Where permitted under applicable law, this Guarantee will be your sole and exclusive remedy for

breach of any guarantee, warranty, or condition, express or implied, in respect of this Product andneither SCEE nor any other Sony entity, or their suppliers or authorised service facilities, will be liablefor any incidental or consequential loss or damage.

If this Product needs any repair which is not covered by this Guarantee, please call the appropriatecustomer service number for advice. If your home country is not one of those listed, please contact yourretailer.Customer Service Numbers can be found on the Customer Registration Card, within every “PlayStation”software manual and on our websites www.playstation-europe.com and www.playstation.com.auPlease complete and return the enclosed (Freepost) Customer Registration Card.

GeneralPower requirements: 220 - 240 V AC, 50/60 HzPower consumption: 10 WDimensions: 270 x 60 x 188 mm (w/h/d)Mass: 1.2 kgOperating Temperature: 5˚C - 35˚CLaser diode properties

•Material: GaAlAs•Wavelength: l=780 nm•Emission duration: Continuous•Laser output: Less than 44.6 µW

(measured at a distance of 200 mm from the lens surface onthe optical pick-up block)

Inputs/outputs on the frontController ports (2)MEMORY CARD slots (2)

Input/output on the rearSERIAL I/O port (1)

Output on the rearAV MULTI OUT output (1)

Supplied accessoriesAC power cord (mains lead) (1)AV Cable (integrated audio/video) (1)Analog Controller (DUALSHOCK) (1)Instruction Manual (1)

Optional accessoriesSCPH-1020 E MEMORY CARDSCPH-1040 E Link CableSCPH-1070 E Multi TapSCPH-1080 E ControllerSCPH-1090 E MouseSCPH-1122 RFU AdaptorSCPH-1140 E AV Cable

(integrated audio/video)SCPH-1160 E AV AdaptorSCPH-1200 E Analog Controller

(DUALSHOCK)

Design and specifications are subject to changewithout notice.

“Sony” is a registered trademark of Sony Corporation.“ ”, “PlayStation” and “DUALSHOCK“ are registered trademarks of Sony Computer Entertainment Inc.

Printed in Japan.

Specifications GUARANTEE