18
(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 1 of 17 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd., Bangkapi, Huaykwang, Bangkok, 10320 THAILAND Mr. Dirk Fleischer (Quality Manager / Authorized Representative) Phone: +66 2716 853 0 Email: [email protected] Mr. Detlef Dahms (Deputy Authorized Representative) Phone: +66 2716 853 0 Email: [email protected] ELECTRICAL Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory at the location listed above, as well as the satellite location listed below to perform the following electromagnetic compatibility and product safety tests: Electromagnetic Compatibility Test Technology Test Method(s) 2 Emissions Radiated / Conducted FCC Part 15 B (using ANSI C63.4-2003 and/or ANSI C63.4-2009); FCC Part 18 (using MP5); IEC CISPR 11; AS/NZS CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; J55013 (H22); AS/NZS CISPR 14.1; EN 55014-1; IEC CISPR 14-1; J55014-1(H20); IEC CISPR 15; IEC CISPR 15 (2005+ A1: 2007+ A2: 2008); AS/NZS CISPR 15; EN 55015; TIS 1955-2542; TIS 1955-2551; J55015 (H20); IEC CISPR 22; IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS 1956-2553; J55022 (H22); J55022 (H20); EN 55032; CISPR 32; EN 50561-1 Current Harmonics IEC 61000-3-2; IEC 61000-3-2 (2005+ A1: 2008+ A2: 2009); EN 61000-3-2; TIS 1448-2544; AS/NZS 61000.3.2 Voltage Fluctuation / Flicker IEC 61000-3-3; IEC 61000-3-3 (2008); EN 61000-3-3; TIS 1449-2552; AS/NZS 61000.3.3 Disturbance Power AS/NZS CISPR 14.1; IEC CISPR 14-1; EN 55014-1; J55014-1 (H20) Click Rate AS/NZS CISPR 14.1; IEC CISPR 14-1; EN 55014-1; J55014-1 (H20) Insertion Loss AS/NZS CISPR 15; CISPR 15; EN 55015; J55013 (H22)

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 1 of 17

SCOPE OF ACCREDITATION TO ISO/IEC 17025:20051

EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD 344/2 Soi Soonvijai 4, Rama 9 Rd.,

Bangkapi, Huaykwang, Bangkok, 10320 THAILAND

Mr. Dirk Fleischer (Quality Manager / Authorized Representative) Phone: +66 2716 853 0 Email: [email protected]

Mr. Detlef Dahms (Deputy Authorized Representative) Phone: +66 2716 853 0 Email: [email protected]

ELECTRICAL

Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory at the location listed above, as well as the satellite location listed below to perform the following electromagnetic compatibility and product safety tests:

Electromagnetic Compatibility Test Technology

Test Method(s)2

Emissions Radiated / Conducted

FCC Part 15 B (using ANSI C63.4-2003 and/or ANSI C63.4-2009); FCC Part 18 (using MP5); IEC CISPR 11; AS/NZS CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; J55013 (H22); AS/NZS CISPR 14.1; EN 55014-1; IEC CISPR 14-1; J55014-1(H20); IEC CISPR 15; IEC CISPR 15 (2005+ A1: 2007+ A2: 2008); AS/NZS CISPR 15; EN 55015; TIS 1955-2542; TIS 1955-2551; J55015 (H20); IEC CISPR 22; IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS 1956-2553; J55022 (H22); J55022 (H20); EN 55032; CISPR 32; EN 50561-1

Current Harmonics IEC 61000-3-2; IEC 61000-3-2 (2005+ A1: 2008+ A2: 2009);

EN 61000-3-2; TIS 1448-2544; AS/NZS 61000.3.2 Voltage Fluctuation / Flicker IEC 61000-3-3; IEC 61000-3-3 (2008); EN 61000-3-3;

TIS 1449-2552; AS/NZS 61000.3.3 Disturbance Power AS/NZS CISPR 14.1; IEC CISPR 14-1; EN 55014-1;

J55014-1 (H20) Click Rate AS/NZS CISPR 14.1; IEC CISPR 14-1; EN 55014-1;

J55014-1 (H20)

Insertion Loss

AS/NZS CISPR 15; CISPR 15; EN 55015; J55013 (H22)

Page 2: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 2 of 17

Test Technology

Test Method(s)2

Immunity Electrostatic Discharge IEC 61000-4-2; IEC 61000-4-2 (1995+ A1: 1998+ A2: 2000);

EN 61000-4-2; TIS 1452-2552 Radiated Immunity IEC 61000-4-3; IEC 61000-4-3 (2006); EN 61000-4-3;

TIS 1453-2552; IEC 61000-4-20; EN 61000-4-20 Electrical Fast Transients (Burst)

IEC 61000-4-4; IEC 61000-4-4 (2004); EN 61000-4-4; TIS 1454-2552

Surge Immunity IEC 61000-4-5; IEC 61000-4-5 (2005); EN 61000-4-5;

TIS 1455-2540 Conducted Immunity IEC 61000-4-6; EN 61000-4-6; TIS 2394-2551 Magnetic Field Immunity IEC 61000-4-8; IEC 61000-4-8 (1993+ A1: 2000);

EN 61000-4-8; TIS 1457-2552 Voltage Dips Short Interruptions Voltage Variations

IEC 61000-4-11; IEC 61000-4-11 (2004); EN 61000-4-11; TIS 1460-2552

Harmonics and Interharmonics Including Mains Signaling at A.C. Power Port, Low Frequency

IEC 61000-4-13; EN 61000-4-13

Audio / Video Immunity EN 55020; IEC CISPR 20 Product Family/ Generic Standard International

Title

IEC 61000-4-1 EN 61000-4-1 TIS 1451-2552

Electromagnetic compatibility (EMC) – Part 4- I: Testing and measurement techniques – Overview of IEC 61000-4 series.

IEC 61000-6-1 EN 61000-6-1

Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity for residential, commercial and light-industrial environments

IEC 61000-6-2 EN 61000-6-2

Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial environments

IEC 61000-6-3 EN 61000-6-3

Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments

IEC 61000-6-4 EN 61000-6-4

Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments

Page 3: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 3 of 17

International

Title

EN 50083-2 TIS 2168-2547

Cable networks for television signals, sound signals and interactive services – Part 2: Electromagnetic compatibility for equipment

EN 50130-4 Alarm systems – Part 4: Electromagnetic compatibility –

Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

EN 55014-2 IEC CISPR 14-2

Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 2: Immunity – Product family standard

IEC CISPR 20 IEC CISPR 20 (2006) EN 55020 TIS 2076-2552

Sound and television broadcast receivers and associated equipment – Immunity characteristics – Limits and methods of measurement

IEC CISPR 24 IEC CISPR 24 (1997+ A1: 2001+ A2: 2002) EN 55024 IEC CISPR 24 TIS 2077-2544

Information technology equipment – Immunity characteristics – Limits and methods of measurement

IEC 60601-1-2 Medical electrical equipment – Part 1-2: General requirements

for safety – Collateral standard: Electromagnetic compatibility – Requirements and tests.

IEC 60728-2 Cable networks for television signals, Sound signals and

interactive services – Part 2: Electromagnetic compatibility for equipment

IEC 60947-1 EN 60947-1

Low-voltage switchgear and control gear – Part 1: General rules

IEC 60947-2 EN 60947-2

Low-voltage switchgear and control gear – Part 2: Circuit-breakers

IEC 61326-1 EN 61326-1

Electrical equipment for measurement, control and laboratory use – EMC requirements

IEC 61326-2-2 EN 61326-2-2

Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

IEC 61547 EN 61547

Equipment for general lighting purposes – EMC immunity requirements

Page 4: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 4 of 17

International

Title

EN 55103-1 Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 1: Emission

EN 55103-2 Electromagnetic compatibility – Product family standard for

audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 2: Immunity

EN 55032 CISPR 32

Electromagnetic compatibility of multimedia equipment – Emission requirements

EN 50561-1 Power line communication apparatus used in low-voltage

installations. Radio disturbance characteristics. Limits and methods of measurement apparatus for in-home use

IEC 62233 EN 62233

Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure

IEC 62493 EN 62493

Assessment of lighting equipment related to human exposure to electromagnetic fields

EN 50366 Household and similar electrical appliances – Electromagnetic

fields – Methods for evaluation and measurement

Page 5: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 5 of 17

Product Safety Test Standards

International

Title

IEC 62115 EN 62115

Safety of electric toys

IEC 60529 EN 60529

Degrees of protection provided by enclosures (IP code)

IEC 60065 EN 60065 TIS 1195-2536

Audio, video and similar electronic apparatus – Safety requirements

IEC 60950-1 (2005) IEC 60950-1 EN 60950-1 TIS 1561-2548

Information technology equipment – Safety – Part I: General Requirements

IEC/EN 60034-1,-2,-3,-4,-5,-6,-7,-8,-9,-11,-12,-13,-14,-15,-16,-18,-22

Rotating electrical machines – Rating and performance

IEC 60204-1 EN 60204-1

Safety of machinery – Electrical equipment of machines – Part 1: General requirements

IEC 60335-1 (2001+ A1: 2004+ A2: 2006) IEC 60335-1 EN 60335-1 TIS 1375-2547

Household and similar electrical appliances – Safety – Part 1: General Requirements

IEC 60335-2-2 EN 60335-2-2 TIS 1522-2552

Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliance

IEC 60335-2-3 EN 60335-2-3 TIS 366-2547

Part 2-3: Particular requirements for electric irons

IEC 60335-2-4 (2002+ A1: 2004+ A2: 2006) IEC 60335-2-4 EN 60335-2-4 TIS 1542-2541

Part 2-4: Particular requirements for spin extractors

IEC 60335-2-5 (2002+ A1: 2005) IEC 60335-2-5 EN 60335-2-5 TIS 1838-2542

Part 2-5: Particular requirements for dishwashers

Page 6: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 6 of 17

International

Title

IEC 60335-2-6 (2002+ A1: 2004) IEC 60335-2-6 EN 60335-2-6 TIS 1913-2542

Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

IEC 60335-2-7 (2002+ A1: 2004+ A2: 2006) IEC 60335-2-7 EN 60335-2-7 TIS 1463-2540

Part 2-7: Particular requirements for washing machines

IEC 60335-2-8 (2002+ A1: 2005) IEC 60335-2-8 EN 60335-2-8 TIS 1555-2550

Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

IEC 60335-2-9 (2002+ A1: 2004+ A2: 2006) IEC 60335-2-9 EN 60335-2-9 TIS 1641-2552

Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances

IEC 60335-2-11 (2003) IEC 60335-2-11 EN 60335-2-11 TIS 1389-2539

Part 2-11: Particular requirements for tumble dryers

IEC 60335-2-12 (2005) IEC 60335-2-12 EN 60335-2-12 TIS 1775-2542

Part 2-12: Particular requirements for warming plates and similar appliances

IEC 60335-2-13 (2002+ A1: 2004) IEC 60335-2-13 EN 60335-2-13 TIS 2013-2543

Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

IEC 60335-2-14 (2006) IEC 60335-2-14 EN 60335-2-14 TIS 1515-2550

Part 2-14: Particular requirements for kitchen machines

IEC 60335-2-15 EN 60335-2-15 TIS 2439-2552

Part 2-15: Particular requirements for appliances for heating liquids

IEC 60335-2-21 EN 60335-2-21

Part 2-21: Particular requirements for storage water heaters

Page 7: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 7 of 17

International

Title

IEC 60335-2-23 (2005) IEC 60335-2-23 EN 60335-2-23 TIS 1985-2549

Part 2-23: Particular requirements for appliances for skin or hair care

IEC 60335-2-24 EN 60335-2-24 TIS 2214-2548

Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers

IEC 60335-2-25 (2002+ A1:2005+ A2:2006) IEC 60335-2-25 EN 60335-2-25 TIS 1773-2548

Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

IEC 60335-2-26 EN 60335-2-26

Part 2-26: Particular requirements for clocks

IEC 60335-2-27 (2002+ A1:2004+ A2:2007) IEC 60335-2-27 EN 60335-2-27 TIS 1877-2542

Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

IEC 60335-2-29 (2002+ A1: 2004) IEC 60335-2-29 EN 60335-2-29 TIS 1676-2541

Part 2-29: Particular requirements for battery chargers

IEC 60335-2-30 EN 60335-2-30

Part 2-30: Particular requirements for room heaters

IEC 60335-2-31 (2002+ A1: 2006) IEC 60335-2-31 EN 60335-2-31 TIS 1996-2552

Part 2-31: Particular requirements for range hoods

IEC 60335-2-32 (2005) IEC 60335-2-32 EN 60335-2-32 TIS 1803-2542

Part 2-32: Particular requirements for massage appliances

IEC 60335-2-34 EN 60335-2-34

Part 2-34: Particular requirements for motor-compressors

IEC 60335-2-35 (2002+ A1: 2006) IEC 60335-2-35 EN 60335-2-35 TIS 1693-2547

Part 2-35: Particular requirements for instantaneous water heaters

Page 8: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 8 of 17

International

Title

IEC 60335-2-40 (2002+ A1: 2005+ A2: 2005) IEC 60335-2-40 EN 60335-2-40 TIS 1529-2541

Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

IEC 60335-2-41 EN 60335-2-41 TIS 1548-2551

Part 2-41: Particular requirements for pumps

IEC 60335-2-44 (2003) IEC 60335-2-44 EN 60335-2-44 TIS 1567-2551

Part 2-44: Particular requirements for ironers

IEC 60335-2-45 EN 60335-2-45

Part 2-45: Particular requirements for portable heating tools and similar appliances

IEC 60335-2-52 (2005) IEC 60335-2-52 EN 60335-2-52 TIS 1543-2541

Part 2-52: Particular requirements for oral hygiene appliances

IEC 60335-2-53 (2002+ A1: 2007) IEC 60335-2-53 EN 60335-2-53 TIS 1804-2542

Part 2-53: Particular requirements for sauna heating appliances

IEC 60335-2-54 EN 60335-2-54

Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam

IEC 60335-2-55 EN 60335-2-55

Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds

IEC 60335-2-56 EN 60335-2-56

Part 2-56: Particular requirements for projectors and similar appliances

IEC 60335-2-59 (2002+ A1: 2006) IEC 60335-2-59 EN 60335-2-59 TIS 1552-2551

Part 2-59: Particular requirements for insect killers

IEC 60335-2-65 EN 60335-2-65 TIS 1516-2549

Part 2-65: Particular requirements for air-cleaning appliances

IEC 60335-2-74 (2002+ A1: 2006) IEC 60335-2-74 EN 60335-2-74 TIS 1908-2552

Part 2-74: Particular requirements for portable immersion heaters

Page 9: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 9 of 17

International

Title

IEC 60335-2-78 EN 60335-2-78

Part 2-78: Particular requirements for outdoor barbecues

IEC 60335-2-80 EN 60335-2-80 TIS 934-2533

Part 2-80: Particular requirements for fans

IEC 60335-2-81 EN 60335-2-81

Part 2-81: Particular requirements for foot warmers and heating mats

IEC 60335-2-84 EN 60335-2-84

Part 2-84: Particular requirements for toilets

IEC 60335-2-88 EN 60335-2-88

Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems

IEC 60335-2-89 EN 60335-2-89

Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

IEC 60335-2-98 EN 60335-2-98

Part 2-98: Particular requirements for humidifiers

IEC 60598-1 EN 60598-1

Luminaries – Part 1: General requirements and tests

IEC 60598-2-1 EN 60598-2-1 TIS 902-2532

Part 2-1: Particular requirements – Fixed general purpose luminaries

IEC 60598-2-2 EN 60598-2-2 TIS 903-2532

Part 2-2: Particular requirements – Recessed luminaires

IEC 60598-2-3 EN 60598-2-3 TIS 904-2532

Part 2-3: Particular requirements – Luminaires for road and street lighting

IEC 60598-2-4 (2002) IEC 60598-2-4 EN 60598-2-4 TIS 905-2532

Part 2-4: Particular requirements – Portable general purpose luminaries

IEC 60598-2-5 EN 60598-2-5 TIS 906-2532

Part 2-5: Particular requirements – Floodlights

IEC 60598-2-6 EN 60598-2-6

Part 2-6: Particular requirements – Luminaries with built-in transformers or converters for filament lamps

Page 10: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 10 of 17

International

Title

IEC 60598-2-7 EN 60598-2-7

Part 2-7: Particular requirements – Portable luminaries for garden use

IEC 60598-2-8 EN 60598-2-8 TIS 907-2532

Part 2-8: Particular requirements – Hand lamps

IEC 60598-2-9 EN 60598-2-9

Part 2-9: Particular requirements – Photo and film luminaries (non-professional)

IEC 60598-2-10 EN 60598-2-10

Part 2- l0: Particular requirements – Portable luminaries for children

IEC 60598-2-17 EN 60598-2-17

Part 2-17: Particular requirements – Luminaries for stage lighting, television film and photographic studios (outdoor and indoor)

IEC 60598-2-20 EN 60598-2-20

Part 2-20: Particular requirements – Lighting chains

IEC 60598-2-22 EN 60598-2-22

Part 2-22: Particular requirements – Luminaries for emergency lighting

IEC 60598-2-23 EN 60598-2-23

Part 2-23: Particular requirements – Extra low-voltage lighting systems for filament lamps

IEC 60598-2-24 EN 60598-2-24

Part 2-24: Particular requirements – Luminaries with limited surface temperatures

IEC 60730-1 EN 60730-1

Automatic electrical controls for household and similar use – Part 1: General requirements

IEC 61010-1 EN 61010-1 TIS 2001-2543

Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements

IEC 61010-031 EN 61010-031

Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

IEC 61010-2-032 EN 61010-2-032

Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

IEC 61199 EN 61199 TIS 2235-2548

Single-capped fluorescent lamps – Safety specifications

IEC 61347-1 EN 61347-1

Lamp Control gear- Part 1: General and safety requirements

Page 11: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 11 of 17

International

Title

IEC 61347-2-1 EN 61347-2-1

Part 2-1: Particular requirements for starting devices (other than glow starters)

IEC 61347-2-3 EN 61347-2-3

Part 2-3: Particiular requirements for AC and/or DC supplied electronic control gear for fluorescent lamps

IEC 61347-2-4 EN 61347-2-4

Part 2-4: Particular requirements for DC supplied electronic ballasts for general lighting

IEC 61347-2-13 EN 61347-2-13

Part 2-13: Particular requirements for DC or AC supplied electronic control gear for LED modules

IEC 61558-1 EN 61558-1

Safety of power transformers, power supply units and similar – Part 1: General requirements and tests

IEC 61558-2-1 EN 61558-2-1

Part 2-1: Particular requirements for separating transformers for general use

IEC 61558-2-2 EN 61558-2-2

Part 2-2: Particular requirements for control transformers

IEC 61558-2-4 EN 61558-2-4

Part 2-4: Particular requirements for isolating transformers for general use

IEC 61558-2-6 EN 61558-2-6

Part 2-6: Particular requirements for safety isolating transformers for general use

IEC 61558-2-7 EN 61558-2-7

Part 2-7: Particular requirements for transformers for toys

IEC 61558-2-8 EN 61558-2-8

Part 2-8: Particular requirements for bell and chime transformers

IEC 61558-2-9 EN 61558-2-9

Part 2-9: Particular requirements for transformers for class III hand lamps for tungsten filament lamps

IEC 61558-2-12 EN 61558-2-12

Part 2-12: Particular requirements for constant voltage transformers

IEC 61558-2-13 EN 61558-2-13

Part 2-13: Particular requirements for auto-transformers for general use

IEC 61558-2-16 EN 61558-2-16

Part 2-16: Particular requirements for transformers for switch mode power supplies.

IEC 60432-1 EN 60432-1

Incandescent lamps – Safety specifications – Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

Page 12: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 12 of 17

International

Title

IEC 60432-2 EN 60432-2

Incandescent lamps – Safety specifications – Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

IEC 60432-3 EN 60432-3

Incandescent lamps – Safety specifications – Part 3: Tungsten-halogen lamps (non-vehicle)

IEC 60947-1 EN 60947-1

Low-voltage switchgear and control gear – Part 1: General rules

IEC 61800-5-1 EN 61800-5-1

Adjustable speed electrical power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy

For typical products or types of products

Specific Tests Available - Input current - Steady force test- Durability of markings - Drop test- Access to live parts - Stress relief- Energy hazards - Wall or ceiling mounted equipment- SELV circuits - Handles and manual controls - TNV circuits, limits, connections

voltages generated externally - Telecommunication network separation

and protection- Limited current circuits, values - Direct plug-in equipment - Resistances of earthing conductors - Protection against hazardous moving

parts- Humidity conditioning - Thermal Requirements - Creepage distances, clearances - Temperature rise- Working voltage - Resistance to abnormal heat - Measurement of transient levels - Material tests, Flammability test - Thermal cycling and thermal ageing - Material tests, Glow wire test - Mechanical Strength - Electrical strength- Enclosed and sealed parts - Voltage surge test, Impulse test - Cord anchorage and strain relief - Stability- Touch current and protective conductor current test

Page 13: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 13 of 17

Energy Efficiency Test Standards

International

Title

ISO 15502 IEC 62552 EN 62552 UAE.S IEC 62558 JIS C 9801 JS 1749 IS 15750 SANS 62552 SANS 1691

Household refrigerating appliances – Characteristics and test methods

IEC 62552-1 EN 62552-1

Household refrigerating appliances – Charateristics and test methods – Part 1: General requirements

IEC 62552-2 EN 62552-2

Household refrigerating appliances – Charateristics and test methods – Part 2: Performance requirements

IEC 62552-3 EN 62552-3

Household refrigerating appliances – Charateristics and test methods – Part 3: Energy consumption and volume

EN 153

Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers, and their combinations, together with associated characteristics

ES 3794 Energy efficiency of Household and similar Electrical

Appliances Measurement and Calculation Methods for Energy Consumption of Refrigerators, Refrigerator-Freezers and Freezers

UNIT 1138 Energy efficiency – Electrical refrigerating equipment

household specifications and labeling EN 62087 AS/NZS 62087.1

Methods of measurement for the power consumption of audio, video and related equipment

IEC 62301 EN 62301

Household electrical appliances – Measurement of Standby power

EN 50564

Electrical and electronic household and office equipment – Measurement of low power consumption

IEC 60107 EN 60107

Methods of measurement on receivers for television broadcast transmission – General considerations – Measurements on displays at radio and video frequencies

Page 14: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 14 of 17

International

Title

IEC 60456 EN 60456 UAE.S IEC 60456 SASO 2683/2007 JIS C 9811 IS 14166

Clothes washing machines for household use – Methods for measuring the performance

SASO 2664/2007 SASO 2664/2013

Energy Performance and Capacity of Household refrigerators, refrigerator-freezers, and freezers

SASO 2692/2007 SASO 2692/2013

Energy labelling requirements of household electrical clothes washing machines

SASO 2693/2007 Clothes washing machines for household use –

Performance requirements SASO 2772/2009 SASO 2772/2016

Water consumption efficiency requirements for clothes washing machines – Rating and labeling

AS/NZS 4474.1 Performance of household electrical appliances –

Refrigerating appliances – Energy consumption and performance

AS/NZS 4474.2 Performance of household electrical appliances –

Refrigerating appliances – Energy labelling and minimum energy performance standard requirements

AS/NZS 2040.1 Performance of household electrical appliances – Clothes

washing machines – Methods for measuring performance, energy and water consumption

AS/NZS 2040.2 Performance of household electrical appliances – Clothes

washing machines – Energy efficiency labelling requirements

UAE.S.5010-2 Energy efficiency label for electrical appliances Part 2:

Washing machines and dryers UAE.S.5010-3 Energy efficiency label for electrical appliances Part 3:

Household refrigerating appliances JS 1717 (2006) JS 1888 (2012)

Clothes washing machines for household use – Methods for measuring the performance

JS 2102 Technical regulation on eco-design requirements for

household refrigerating appliances JS 2101 Energy labelling for household refrigerating appliances

Page 15: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 15 of 17

International

Title

IEC 62512 EN 62512 UAE.S IEC 62512

Electric clothes washer/dryers for household use – Methods for measuring the performance

IEC 61121 EN 61121 UAE.S IEC 61121

Tumble dryers for house hold use – Methods for measuring the performance

JIS C 9606 Electric washing machines JIS C 9607 Household electric refrigerators, refrigerator-freezer and

freezers

Acoustics Test Standards

International

Title

IEC 60704-1 EN 60704-1

Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 1: General requirements

IEC 60704-2-1 EN 60704-2-1

Part 2-1: Particular requirements for vacuum cleaners

IEC 60704-2-2 EN 60704-2-2

Part 2-2: Particular requirements for fan heaters

IEC 60704-2-3 EN 60704-2-3

Part 2-3: Particular requirements for dishwashers

IEC 60704-2-4 EN 60704-2-4

Part 2-4: Particular requirements for washing machines and spin extractors

IEC 60704-2-5 EN 60704-2-5

Part 2-5: Particular requirements for electric thermal storage room heaters

IEC 60704-2-6 EN 60704-2-6

Part 2-6: Particular requirements for tumble dryers

IEC 60704-2-7 EN 60704-2-7

Part 2-7: Particular requirements for fans

IEC 60704-2-8 EN 60704-2-8

Part 2-8: Particular requirements for electric shavers

IEC 60704-2-9 EN 60704-2-9

Part 2-9: Particular requirements for electric hair care appliances

Page 16: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 16 of 17

International

Title

IEC 60704-2-10 EN 60704-2-10

Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these

IEC 60704-2-11 EN 60704-2-11

Part 2-11: Particular requirements for electrically-operated food preparation

IEC 60704-2-13 EN 60704-2-13

Part 2-13: Particular requirements for range hoods

IEC 60704-2-14 EN 60704-2-14

Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers

IEC 60704-3 EN 60704-3

Part 3: Procedure for determining and verifying declared noise emission values

ISO 3744 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane

ISO 3745 Acoustics – Determination of sound power levels of noise

sources using sound pressure – Precision methods for anechoic and hemi-anechoic rooms

ISO 7779 Acoustics – Measurement of airborne noise emitted by

information technology and telecommunications equipment ISO 9295 Acoustics – Measurement of high-frequency noise emitted

by computer and business equipment ISO 9296 Acoustics – Declared noise emission values of computer

and business equipment 1 Accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory location listed below.

98/2 Moo 19, Tumbol Takhi Takhi District, Nakhon Sawan 60140, Thailand

Test Technology

Test Method(s)2

Emissions Radiated

FCC Part 15 B (using ANSI C63.4-2003 and/or ANSI C63.4-2009); FCC Part 18 (using MP5); IEC CISPR 11; AS/NZS CISPR 11; EN 55011; IEC CISPR 13; AS/NZS CISPR 13; EN 55013; J55013 (H22); IEC CISPR 22; IEC CISPR 22 (2006); AS/NZS CISPR 22; EN 55022; TIS 1956-2553; J55022 (H22); J55022 (H20); EN 55032; CISPR 32; EN 50561-1

Page 17: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

(A2LA Cert. No. 2402.01) Revised 01/27/2017 Page 17 of 17

2 When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per part C., Section 1 of A2LA R101 - General Requirements- Accreditation of ISO-IEC 17025 Laboratories.

Page 18: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS ... · Valid to: December 31, 2017 Certificate Number: 2402.01 In recognition of the successful completion of the A2LA evaluation

For the tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation.

Accredited Laboratory

A2LA has accredited

EUROFINS PRODUCT SERVICE (THAILAND) CO., LTD. Bangkok, Thailand

for technical competence in the field of

Electrical Testing

This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates

technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009).

Presented this 27th day of January 2017. _______________________ President and CEO For the Accreditation Council Certificate Number 2402.01 Valid to December 31, 2017 Revised January 27, 2017