Product datasheet Characteristics

XCRE18

limit switch XCR - metal stay put crossed rods lever square rod 6mm - 2X(1NC+NO)  

Main Range of product OsiSense XC

Series name Special format

Product or component type Limit switch

Product specific application For hoisting and mechanical handling applications

Device short name XCR

Sensor design -

Body type Fixed

Head type Rotary head

Material Metal

Fixing mode By the body

Movement of operating head Rotary

Type of operator Metal stay put crossed rods lever (square rod 6 mm)

Type of approach 2 directions lateral approach

Electrical connection Screw-clamp terminals, clamping capacity: 1 x 0.34...2 x 1.5 mm²

Number of poles 4

Contacts type and composition 2 x (1 NC + 1 NO)

Contacts operation Snap action

Contact block per direction (control circuit)

2 per direction

Positive opening With

Complementary Body material Zinc alloy

Switch actuation By any moving part

Cable entry 1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 9...12 mm conforming to NF C 68-300

Contacts insulation form Zb

Number of steps 1

Positive opening minimum torque 0.7 N.m

Minimum torque for tripping 0.6 N.m

Minimum actuation speed 0.01 m/min

Maximum actuation speed 1.5 m/s

Maximum displacement angle 90 ° -90 °

Contact code designation A300, AC-15 240 V, Ie = 3 A) conforming to EN/IEC 60947-5-1 appendix A Q300, DC-13 250 V, Ie = 0.27 A) conforming to EN/IEC 60947-5-1 appendix A

[Ui] rated insulation voltage 500 V degree of pollution 3 conforming to IEC 60947-1 500 V degree of pollution 3 conforming to VDE 0110 300 V conforming to CSA C22-2 No 14 300 V conforming to UL 508

Resistance across terminals <= 25 MOhm conforming to IEC 60255-7 category 3

[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60664 6 kV conforming to IEC 60947-1

Short circuit protection 10 A by gG cartridge fuse

Electrical durability 5000000 cycles, DC-13 inductive load type, 120 V, 4 W, load factor: 0.5, operating rate: <= 60 cyc/mn

The information provided in this docum

entation contains general descriptions and/or technical characteristics of the performance of the products contained herein.

This docum

entation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.

It is the duty of any such user or integrator to perform the appropriate and com

plete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for m

isuse of the information contained herein.

1 / 2

5000000 cycles, DC-13 inductive load type, 24 V, 7 W, load factor: 0.5, operating rate: <= 60 cyc/mn 5000000 cycles, DC-13 inductive load type, 48 V, 10 W, load factor: 0.5, operating rate: <= 60 cyc/mn

Mechanical durability 10000000 cycles

Width 85 mm

Height 95 mm

Depth 53 mm

Product weight 1135 kg

CAD overall width 200 mm

CAD overall height 200 mm

CAD overall depth 75 mm

Terminals description ISO n°1 (13-14)NO (21-22)NC

Environment Shock resistance 68 gn conforming to IEC 60068-2-27

Vibration resistance 9 gn (f = 10...500 Hz) conforming to IEC 60068-2-6

IP degree of protection IP54 conforming to IEC 60529

Class of protection against electric shock Class I conforming to IEC 61140 Class I conforming to NF C 20-030

Ambient air temperature for operation -25...70 °C

Ambient air temperature for storage -40...70 °C

Protective treatment TC

Product certifications CCC CSA

Standards CSA C22-2 No 14 EN 60204-1 EN 60947-5-1 IEC 60204-1 IEC 60947-5-1 NF C 79-130

Offer Sustainability Sustainable offer status Green Premium product

RoHS Compliant - since 1012 - Schneider Electric declaration of conformity

REACh Reference not containing SVHC above the threshold

Product environmental profile Available

Product end of life instructions Need no specific recycling operations

2 / 2