-
LED DRIVER SCC 200W
KEY FEATURES
Model Output current Output voltage Output power
SCC200 - C450 450mA 267 - 444V 199.8W
SCC200 - C700 700mA 171 - 286V 200.2W
SCC200 - C1050 1050mA 114 - 190V 199.5W
SCC200 - C1400 1400mA 86 - 143V 200.2W
SCC200 - C1750 1750mA 69 - 114V 199.5W
SCC200 - C2100 2100mA 57 - 95V 199.5W
SCC200 - C2450 2450mA 49 - 82V 200.9W
SCC200 - C2800 2800mA 43 - 71V 198.8W
SCC200 - C3150 3150mA 38 - 63V 198.4W
SCC200 - C3500 3500mA 34 - 57V 199.5W
SCC200 - C4200 4200mA 29 - 48V 201.6W
SCC200 - C5200 5200mA 23 - 38V 197.6W
MODELS
CHARACTERISTICS
Parameters Value Test conditions / Comment
Input operating voltage AC 100 - 240V -
Input programming voltage AC 160 - 240V -
Input frequency 50Hz -
Input current 1.0A Full load, V = AC 230Vin
Inrush current 65A Cold start, V = AC 230Vin
Power factor 0.96 Full load, V = AC 230Vin
Efficiency 90% Full voltage, full load
Dimming control Programmable, PLC SEAK S-50 PLC
ENERGETICS
Constant current output
C
Built-in module for smart dimming and PLC control
Active power factor correction
Short circuit, over voltage, over temperature protections
Designed to worldwide safety standards for lighting
ooling by free air convection
Encapsulated with IP67 level
5 years warranty
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
SEAK PLC
built-in
-
ENERGETICS
Parameters Value Test conditions / Comment
Dimming control 0 - 100% -
Output current accuracy 5% -
Open-circuit voltage
491V SCC200 - C450
315V SCC200 - C700
210V SCC200 - C1050
158V SCC200 - C1400
126V SCC200 - C1750
111V SCC200 - C2100
95V SCC200 - C2450
82V SCC200 - C2800
74V SCC200 - C3150
66V SCC200 - C3500
55V SCC200 - C4200
Output Current overshoot 10% Turning power on
Turn-on delay time 2S Cold start, power on
Ripple 20% -
Storage -40 - +85C Humidity: 5% RH to 95% RH
Ambient operating temperature -40 - +70C Startup at rated
voltage
Maximum case temperature +80C Hot-spot on case
Operating relative humidity 10 - 95% Non considering
MTBF 400kHrsFull load, AC 220V input,
25C ambient temperature
Dimension (LxWxH) 188.5x78.5x37mm -
Weight 850g -
LED DRIVER SCC 200W
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
-
Parameters Value
Over voltage
115~150% rated output voltage. In latch mode, the power
supply
shall return to normal operation only
after the power is turned on again
Short circuitIn hiccup mode, it will recover automatically
fault condition is removed
Over temperature Typical 110C
Safety standards UL8750, UL935, UL1012, UL1310 CLASS 2,
EN61347-1, EN61347-2-13
EMCEN55015, FCC Part 15 Class B, EN61000-3-2, EN61000-3-3,
EN61000-
4-2, 3, 4, 6, 8, 11, EN61547
ENERGETICS
188.5
300+20
DC OUTPUT (2*AWG 18) RED (V+)
BLACK (V-)
50+5 15+2---
158.5
600+20-
AC OUTPUT (3*AWG 18)
RED (ACL)
WHITE (ACN)
GREEN (GND)
15+2- 50+5-
78
37
38
.5
55
4
4
174.5
170.5
8
11
MECHANICAL SPECIFICATION(dimensions in mm)
PROTECTION
LED DRIVER SCC 200W
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
-
ENERGETICS
LED DRIVER SCC 200W
[email protected]
www.seakenergetics.com
SEAK, s.r.o., Levocska 109,
080 01 Presov, Slovak republic
LIFESPAN CHARACTERISTIC
Op
era
tin
g t
ime
(h
ou
rs)
10 000
20 000
30 000
40 000
50 000
60 000
70 000
80 000
90 000
100 000
10 20 30 40 50 60 70 80 90
Case Temperature (C)
0
04_DS200_01_05032015_PMOC
1: 200WStrnka 2Strnka 3Strnka 4
